The test program for an Active Rotary Flux Compressor (ARFC) has demonstrated conclusively that large compression factors can be obtained with a laminated-iron, wave-wound, rotary flux compressor. Peak-current to startup-current ratios of 17 have been produced with a rotor tip speed of 60 meters per second. Sub-millisecond pulse widths were also measured: The minimum, 590 muSec (FWHM), was obtained at 5607 rpm with an 8-inch diameter, 4-pole rotor. The machine was operated without a high current output switch, proving the feasibility of a novel commutation scheme described. A computational code has been developed that will calculate the output waveshape of the model ARFC with reasonable accuracy. The code is being refined to better account for saturation in the iron laminations. A second optimization code selects the best design for a given application. This code shows favorable cost effectiveness of large ARFC's over the conventional capacitors to drive flashlamps for large lasers.