Innerspace (1987) Miniaturization Chip (2751752)
Item Preview
Replica of the miniaturization chip prop from the 1987 movie _Innerspace_, with optional cufflink mount as featured at the end of the film.
All parts are separate STL files, to allow multimaterial/color prints. For the "silicon" itself I'd recommend filing down a piece of scrap metal or something silver-coloured to the right size. The pins are included for completeness only - good luck printing them on their own ;) The holes are 0.018" (about 0.46 mm) so the body will take approx. 25AWG wire. The main heatsink part should be almost exactly 0.5" (12.7 mm).
References used:
- Movie footage for scale and details.
- TO-5 specification (package type from which the original prop was made).
- Datasheet for a heatsink similar to that used for the original prop.
All parts are separate STL files, to allow multimaterial/color prints. For the "silicon" itself I'd recommend filing down a piece of scrap metal or something silver-coloured to the right size. The pins are included for completeness only - good luck printing them on their own ;) The holes are 0.018" (about 0.46 mm) so the body will take approx. 25AWG wire. The main heatsink part should be almost exactly 0.5" (12.7 mm).
References used:
- Movie footage for scale and details.
- TO-5 specification (package type from which the original prop was made).
- Datasheet for a heatsink similar to that used for the original prop.
Reviews
There are no reviews yet. Be the first one to
write a review.
