Yagi Handle with Compass Mount for Fox Hunts (4516339)
Item Preview
This is a printable handle for a yagi antenna. It includes a compass mount, so that the antenna can be used for radio direction finding a.k.a. fox hunts.
Furthermore the handle is hollow. thus making it possible to mount on a pole. But be careful what material you are using to print the parts in regards of stability.
To connect all pieces I used M4 nuts and M4x8 or M4x10 screws. The antenna is friction fitted by the screws on the bottom of the prints.
A compass can be mounted using zip-ties.
I printed the part on the photos with an Elegoo Mars w/o mods using standard white elegoo resin and printer settings. For further stability I would recommend using a tough resin, which at the time of uploading I didn't have.
As a sidenote the antenna can be found on Wimo.com
vy 73 de OE1WEH
Furthermore the handle is hollow. thus making it possible to mount on a pole. But be careful what material you are using to print the parts in regards of stability.
To connect all pieces I used M4 nuts and M4x8 or M4x10 screws. The antenna is friction fitted by the screws on the bottom of the prints.
A compass can be mounted using zip-ties.
I printed the part on the photos with an Elegoo Mars w/o mods using standard white elegoo resin and printer settings. For further stability I would recommend using a tough resin, which at the time of uploading I didn't have.
As a sidenote the antenna can be found on Wimo.com
vy 73 de OE1WEH
Reviews
There are no reviews yet. Be the first one to
write a review.
