8
8.0
Apr 30, 2021
04/21
by
Herbert Gumpp (HerbertG)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:116042 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=116042
Topics: stl, cookie_cutter, Kitchen & Dining, thingiverse, Bodensee, customized
8
8.0
Apr 30, 2021
04/21
by
Torsten Dr. Thurow (TThurow)
data
eye 8
favorite 0
comment 0
C-Mount Objektivhalter für Raspberry Kamera 2.1 Bisherige Linse ausschrauben und den Objektivhalter auf die Platine mit 4 M2-Schrauben aufschrauben.
Topics: stl, c-mount, raspberry_pi_camera, Other, thingiverse, case
8
8.0
Mar 18, 2021
03/21
by
Gilly Wings (gilly_wings)
data
eye 8
favorite 0
comment 0
Support trapezoidal pour la discoeasy afin de mettre des vis trapézoidales ( à recouper) disponibles ici : https://fr.aliexpress.com/item/High-quality-T8-8-mm-lead-screw-400-mm-8mm-lead-trapezoidal-spindle-screw-with-3pcs/32603424968.html Pour modifier le pas dans le firmware marlin, il faut se rendre dans l'onglet "configuration.h" il faut modifier la ligne suivante : define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,2560,98} par define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,400,98}
Topics: stl, 3D Printer Parts, thingiverse
8
8.0
Mar 18, 2021
03/21
by
SEBASTIEN FAURE (sebydjay)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:340321 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=340321
Topics: customized, Construction Toys, stl, thingiverse
8
8.0
Apr 30, 2021
04/21
by
eduardo penelo (luoete)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:1220978 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1220978
Topics: stl, thingiverse, customized, Accessories
8
8.0
Apr 30, 2021
04/21
by
Attila (bbrain)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: stl, thingiverse, customized, Keychains
8
8.0
Apr 30, 2021
04/21
by
Алексей Сердюк (SAI99)
data
eye 8
favorite 0
comment 0
Quickly removable wall mount monitor rotated in the horizontal plane. The monitor must be VESA 100x100. VESA 75х75 For Assembly of wall mounting: bolt M6 - 50 mm - 1pc. nut M6 - 1pc. For attachment to the monitor: screw M4 - 25 mm - 4pcs. Good luck. I invest a lot of time designing, and then test-printing and refining the models. This has caused elevated coffee bills.
Topics: stl, Computer, monitor_mount, VESA_100, wall_mount, thingiverse, VESA_75x75
8
8.0
Apr 30, 2021
04/21
by
Dmitriy Raykov (Dimonira)
data
eye 8
favorite 0
comment 0
Before installing the handle is necessary to disassemble the router and remove the lock. You will also need a longer screw 25-30 mm. The project file for SketchUp 2017 is attached. UPDATED: I added a graduated scale. One step is equal to 1/256" = approx. 0.1mm.
Topics: stl, thingiverse, Parts
8
8.0
Apr 30, 2021
04/21
by
Adrian Simon (AdrianMateo)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:1961282 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1961282
Topics: stl, thingiverse, customized, Household
8
8.0
Apr 30, 2021
04/21
by
Attila (bbrain)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: stl, thingiverse, customized, Keychains
8
8.0
Apr 30, 2021
04/21
by
Martin N (Schleichmichl)
data
eye 8
favorite 0
comment 0
Ampulla opener for 1ml size. https://de.wikipedia.org/wiki/Ampulle_(Beh%C3%A4lter) The dot of the Ampulla needs to be on the opposite side of the window. Just cover the ampulla with the opener and it will break it when pressing it down. The 88Kb file size version is a little larger for labeled ampullas, so it doesn't get stuck.
Topics: stl, Nurs, Nursery, medical, Nurse, thingiverse, Other
6
6.0
Jan 20, 2021
01/21
by
Séverine Déret (wewene)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:2850939 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2850939
Topics: customized, stl, Signs & Logos, thingiverse
6
6.0
Apr 18, 2021
04/21
by
Ccc RoSe (Trenes_y_Joyas)
data
eye 6
favorite 0
comment 0
It's a horseshoe shaped heavy ring. Es un anillo tocho con forma de herradura.
Topics: herradura, jewelry, thingiverse, joyas, anillos, stl, horseshoe, Rings, rings, jewellery
6
6.0
Jan 20, 2021
01/21
by
Can Can (laserbrain23)
data
eye 6
favorite 0
comment 0
Ich habe mal einen Fluglochkeil für Zanderbeuten gemacht, funktioniert bei mir sehr gut.
Topics: Outdoor & Garden, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Juan José CNC (Juanjo_CNC)
data
eye 6
favorite 0
comment 0
Marco rígido para Anet E10 (aunque ya queda poco de la original ;-))) Materiales: - 1 varilla roscada M10. Cortar a 480mm. - 8 tuercas M10 y 4 arandelas. - 12 tornillos M4x14. - 12 Tnuts o tuercas T, M4. Link: https://es.aliexpress.com/item/20Pcs-M3-M4-M5-For-20-30-Series-Slot-T-nut-Sliding-Nut-Hammer-Head-Drop/32824287538.html?spm=a2g0s.9042311.0.0.274263c0FJCBnc
Topics: 3D Printer Parts, Anet_e10_upgrade, thingiverse, Anet_E10, stl
6
6.0
Jun 20, 2021
06/21
by
ณัฐพงศ์ แกล้วกล้า (nattapong1631)
data
eye 6
favorite 0
comment 0
NATTAPONG KLAEWKLA
Topics: stl, thingiverse, 3D Printers
8
8.0
Jan 20, 2021
01/21
by
Cándido García (candidogarcia)
data
eye 8
favorite 0
comment 0
Modelo de gran generador para una central eléctrica. Para facilitar la impresión, la pieza cubierta-generador-a.stl puede ser sustituida por cubierta-generador.stl, o por cubierta-generador-b.stl. En estas dos últimas se ha de recortar, una vez imprimidas, el soporte lateral, mediante una sierra. https://www.youtube.com/watch?v=4zaG2PSw46I
Topics: generador, alternator, alternador, thingiverse, generador_electrico, Engineering, Mechanical &...
6
6.0
Jan 20, 2021
01/21
by
aboco numb (abokata)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:1148986 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1148986
Topics: Keychains, customized, stl, thingiverse
6
6.0
Jun 20, 2021
06/21
by
IES Eusebio da Guarda (IES_Eusebio_da_Guarda)
data
eye 6
favorite 0
comment 0
Diseño hecho por Martín García Franco, alumno de 1º de bachillerato en el IES Eusebio da Guarda, para la asignatura de TIC. Designed by Martín García Franco, student of first year of High School in IES Eusebio da Guarda, for the subject of TIC.
Topics: Buildings & Structures, thingiverse, building, edificio, stl, coruñ, a, concello,...
7
7.0
Jan 20, 2021
01/21
by
Unai Romo (Nyru)
data
eye 7
favorite 0
comment 0
arandelas
Topics: 3D Printing, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Sylvain Nortier (sylcaroline)
data
eye 6
favorite 0
comment 0
Petit gadget très utile ! Pour la tige il s'agit d'une tige filetée de 5 mm. Prévoir un peu de colle pour fixer le manche et la tapette sur la tige. Réalisé en PLA, c'est assez costaud... A tester avec du fil souple...
Topics: bee splatter, splattershot, splatter, thingiverse, bee, Household, stl, Tapette_a_mouche
5
5.0
Apr 18, 2021
04/21
by
Ana Sánchez (dbtmerida)
data
eye 5
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, customized, thingiverse, stl
7
7.0
Apr 18, 2021
04/21
by
Jomiag (Jomiag)
data
eye 7
favorite 0
comment 0
Sistema de varillas para eje X anet e10 v2.0. (Opción 1 o 2 ventiladores de capa) Se ha conservado el perfil original para proporcionar mayor rigidez al eje y evitar desajustes o pérdidas de pasos de los motores y minimizar inercias. El fin de esta mejora es aumentar la calidad de la impresión evitando las oscilaciones o ghosting del carro de ruedas original y evitar desajustes. En esta nueva versión se ha mejorado el anclaje de la correa prescindiendo del cierre de la versión anterior que...
Topics: 3D Printer Parts, thingiverse, stl
6
6.0
Apr 18, 2021
04/21
by
jean-marie Quinchon (CnCreation)
data
eye 6
favorite 0
comment 0
A imprimer avec des supports.
Topics: plant, 3D Printers, thingiverse, flower_pot, stl
6
6.0
Jan 20, 2021
01/21
by
christophe jeannot (krys22)
data
eye 6
favorite 0
comment 0
voici mon boitier d'arrêt d'urgence pour mon projet REX 8 il me permet en cas de problèmes de couper l'alimentation 230V et limiter les dégâts en cas de problèmes. Il mer sert aussi de bouton d'arrêt machine Lien regroupant tous les fichiers de mon Projet REX 8 avec la configuration de marlin 1.1.8 : https://www.thingiverse.com/thing:2854957
Topics: 3D Printers, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Centro Educagenios (educagenios)
data
eye 6
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jT06dJoenXD
Topics: 3D Printing, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Éric Sellois (Sellois)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, customized, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Aravinth Panch (AravinthPanch)
data
eye 6
favorite 0
comment 0
Enclosure for Mini Speaker with dimensions 40x40x20mm Speaker is available at https://shop.pimoroni.de/products/mini-speaker-4-3w
Topics: Audio, stl, thingiverse
6
6.0
Jun 10, 2021
06/21
by
L. Tollgreef (SolarGermany)
data
eye 6
favorite 0
comment 0
I needed for this project: http://educ8s.tv/arduino-soil-moisture-sensor/ a housing. I extended the whole thing with a switch, because these: https://www.ebay.com/itm/Useful-Soil-Humidity-Hygrometer-Moisture-Detection-Sensor-Module-With-Wires-CA/292043801837?hash=item43ff2ac4ed:g:ViUAAOSw32lYuQlH cheap China soil moisture sensors unfortunately have the habit to dissolve in case of permanent current. But turning it on and off reading it works great for a while now. Shopping List: * 1x...
Topics: measure, growing, arduino_case, nano, home_growing, plant_health, gardening, grow, pflanzen,...
6
6.0
Jan 20, 2021
01/21
by
Andreas Wunder (bastler45)
data
eye 6
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5DpXWDXZOHc Eine Aufbewahrungs Box für die Sicherungs Clipse
Topics: 3D Printing, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Ingo Schneider (Knaudler)
data
eye 6
favorite 0
comment 0
Holder for Ikea JANSJÖ work lamp for 2020 aluminium profile or screw it somewhere else https://www.ikea.com/de/de/catalog/products/60385943/ https://youtu.be/u8qvCDt3E2A please share, print and remix incl. STL, step, f3d files printing time: 40-55min
Topics: lamp holder, thingiverse, 3DJake, Replacement Parts, Ikea, stl, JANSJÖ
6
6.0
Apr 19, 2021
04/21
by
Yuran Liu (BotYoyo)
data
eye 6
favorite 0
comment 0
If you were using Ø3.0 x 56mm suspension rod for MyRCCar. You may noticed the whole is not deep enough for the rod. This remix has deeper holes could fit 56mm rod.
Topics: thingiverse, stl, Automotive
6
6.0
Jan 20, 2021
01/21
by
Ana Sánchez (dbtmerida)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, customized, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Bryce Davey (Juggler22)
data
eye 6
favorite 0
comment 0
This is a custom giveaway for FTC Robotics Team 8221 Cubix³.
Topics: 3D Printing, stl, thingiverse
5
5.0
Jan 21, 2021
01/21
by
ryan sss (ryanlego320)
data
eye 5
favorite 0
comment 0
These are Klöts Evolved. I made the original version and it kept on undoing itself while walking/running/biking. Then I found a remix by tigermcho, and it looked as if his design was slip proof. The problem was you couldn't add another color to it and I disliked the cylindrical joints on the sides of it. (The middle was fine) Update (08/09/18): Thanks so much for all the likes:) If you haven't already make sure you drop a like. Also, if you have any suggestions or anything else make sure you...
Topics: shoe tie, shoe, klots, tie, quick shoe tie, thingiverse, Accessories, stl
5
5.0
Jan 21, 2021
01/21
by
hennequart maxence (max38)
data
eye 5
favorite 0
comment 0
support de télécommande compatible toute télévisions
Topics: télé, télécommande, thingiverse, télévision, Remote_control, Organization, remote, support,...
5
5.0
Jan 21, 2021
01/21
by
Niklas Lindgren (OfficialLeggad)
data
eye 5
favorite 0
comment 0
:)
Topics: R/C Vehicles, stl, thingiverse
5
5.0
Jan 21, 2021
01/21
by
Patrick Kirschbaum (Sixth)
data
eye 5
favorite 0
comment 0
I printed one in ABS.
Topics: Weizenbier_Glas, dishwasher, thingiverse, holder, beer, glass, Halterung, Gadgets, stl
5
5.0
Jan 21, 2021
01/21
by
Picaboubx Picaboubx (Picaboubx)
data
eye 5
favorite 0
comment 0
Clip crochet a viser sur le rideau ou la bâche et a clipper en tournant sur un cable Ø 3mm. Prévoyez un peu de graisse sur le câble pour une meilleur utilisation.
Topics: clip, rideau, Outdoor & Garden, stl, thingiverse, Bachelor, Pergola
5
5.0
Jan 21, 2021
01/21
by
Johann Podina (Heimscheisser)
data
eye 5
favorite 0
comment 0
10mm Stöpsel fpr 12mm rohr test fur black snapper xs rohre
Topics: DIY, stl, thingiverse
5
5.0
Jan 21, 2021
01/21
by
Roman Poeller (svrroot)
data
eye 5
favorite 0
comment 0
remix with Gardena plug because of 3 bar water pressure i had to make it more stable, 1st Version makes a 8 meter high water fountain :) feel free and remix it for your needs Plug is tight enough to use it without rubber seal Updated Version 3.2 (Aug.18) thinner intake, improved walls for higher pressure and i little surprise while printing. comments are welcome
Topics: thingiverse, garden, sprinkler, DIY, stl
5
5.0
Jan 21, 2021
01/21
by
Celine Fontanet (Cfonfon)
data
eye 5
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:1919139 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1919139
Topics: customized, stl, Dice, thingiverse
6
6.0
Jan 20, 2021
01/21
by
brad smith (d3delta3d)
data
eye 6
favorite 0
comment 0
1.5º cleat wedge to suit Shimano SPD-SL cleats. Just print more than 1 if you need more wedging.
Topics: thingiverse, Sport & Outdoors, cleat, wedge, cycling, stl, SPD-SL
6
6.0
Jan 20, 2021
01/21
by
Imprimidor (Imprimidor)
data
eye 6
favorite 0
comment 0
DIVISOR DE CAJONES Organizador circular - Spool Storage Boxes - Grilon3 (1Kg) https://www.thingiverse.com/thing:2954982 Cajonera circular - Spool Storage Boxes - Grilon3 (1Kg) https://www.thingiverse.com/thing:2953950
Topics: organizador_circular, storage_container, grilon_3, holder, box, stl, grilon3, container, reel,...
6
6.0
Jan 20, 2021
01/21
by
Marius Hirn (kitingmare)
data
eye 6
favorite 0
comment 0
I wanted to extend the amount of water my VÄXER hydroponic system can hold and therefore be without supervision. When my salads were almost grown I had to refill the water almost every day. This holds a normal PET or soda bottle and almost doubles the amount of water the VÄXER system can hold. I used an opaque 1,5l energy drink bottle to keep algae growth in check. The system normally won't overflow as long as the bottle doesnt have a "leak" or has too thin walls (vakuumi inside can...
Topics: extension, pet bottle, VAXER, Outdoor & Garden, thingiverse, hydroponic, bottle, hydroponics,...
6
6.0
Jan 20, 2021
01/21
by
Marius Hirn (kitingmare)
data
eye 6
favorite 0
comment 0
This replaces the pod with pumice that holds the starter plug normally. I started using these since I was getting tired of replaceing the pumice stones everytime I restart my setup. Also it helps to reduce algae growths since there is less water surface exposed to the sun. I made a [4 plug holder](https://www.thingiverse.com/thing:3336323) version to start seedlings in the tray. Added a version with a smaller brim to be able to use the Nursery Cross by fastriker. For commercial use message me.
Topics: Outdoor & Garden, VAXER, starter, thingiverse, hydroponic, plug, hydroponics, ikea, stl
6
6.0
Jan 20, 2021
01/21
by
Andre Blumenrath (MrBlumio)
data
eye 6
favorite 0
comment 0
Ihr sucht eine Kabelführung für den Anet A8? Hier die Lösung des Problems. Die weißen Röhrchen oben vom Display können einfach ersetzt werden. Es muss nichts neues gebohrt werden. Einfach tauschen und befestigen. Wenn es euch gefällt, lasst doch gerne ein Like da.
Topics: 3D Printing, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Alain KIFFER (Alainkif)
data
eye 6
favorite 0
comment 0
I wanted to take a classic, the flak 36 anti-aircraft gun of 88mm. I relied on several sources and tried to modify it so I could make it mobile. Some small parts may not print correctly depending on the printers. It may be necessary to try in 0.06 mm. I will post the two trains soon for transport, but I have not had time to work on them yet. It will be necessary to add some axes in "scratch". And shieldAnd also add the shield mounts.
Topics: Toys & Games, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
killbee Chung (killbee)
data
eye 6
favorite 0
comment 0
Just a work for practice.
Topics: Math Art, stl, thingiverse
5
5.0
Jan 21, 2021
01/21
by
Tobias Spielmann (FLUXFREI)
data
eye 5
favorite 0
comment 0
Halteplatte für das ELV Gehäuse 152970
Topics: hutschiene, Electronics, stl, thingiverse, Homematic, Raspberry_pi_3, Hutschienenhalterung
6
6.0
Jan 21, 2021
01/21
by
Mert Akol (ncorp3d)
data
eye 6
favorite 0
comment 0
Video- https://youtu.be/6HxB7eqedQQ Blog- https://www.ncorp3d.com/blog/kucuk-tatli-kaykay İlk yazıcımı topladığım andan itibaren kendime küçük bir kaykay basmak istedim, ama baskı çok da güvenilir gelmedi ve ben de projeyi erteledim. Lazer kesici geldiğinde istediğim küçük kaykayı üretmek için bir engelim kalmadı. İşte sonuç, Şaşırtıcı şekilde kullanışlı ve taşınabilir bir kaykay! Lütfen kendi küçük kaykayını yaparsan benimle paylaş, neler...
Topics: pennyboard, 10mm, lasercut, plywood, penny, thingiverse, Sport & Outdoors, board, little,...
5
5.0
Jan 21, 2021
01/21
by
Philippe Gnos (Pfag)
data
eye 5
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:1738733 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1738733
Topics: Gadgets, customized, stl, thingiverse
6
6.0
Jan 21, 2021
01/21
by
Carsten sonwood (Carsten_Sonwoodzen)
data
eye 6
favorite 0
comment 0
Füsse für Miene Poolleiter da die mit gelieferten Gummifüße immer im Pool geschwommen sind habe ich diese füße entworfen. ich habe sie dann noch mit jeweils einer Edelstahl schraube mit der Leiter verschraubt.
Topics: swimming_pool, Outdoor & Garden, intex_pool, stl, Garten, thingiverse, Pool, intex
5
5.0
Jan 21, 2021
01/21
by
Celine Fontanet (Cfonfon)
data
eye 5
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:131071 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=131071
Topics: customized, stl, Dice, thingiverse
5
5.0
Jun 10, 2021
06/21
by
Reşad Ersoy (resadersoy)
data
eye 5
favorite 0
comment 0
15 TEMMUZ 2016 ŞEHİTLER GÜNÜ ANISINA YAPILAN BİR BİBLODUR. LÜTFEN TİCARİ OLARAK KULLANMAYINIZ.
Topics: thingiverse, Creatures, stl
6
6.0
Jan 21, 2021
01/21
by
kh chan (chankh)
data
eye 6
favorite 0
comment 0
for t3-01
Topics: R/C Vehicles, stl, thingiverse
5
5.0
Jan 21, 2021
01/21
by
Luca C. (Luca89ibanez)
data
eye 5
favorite 0
comment 0
The adaptment of my first coffee-cup holder ( https://www.thingiverse.com/thing:3020826 ) to classic "big" water/drink plastic cups. * Total height: 180mm * I added a small 0,5 bevel all around the borders. My actual settings: - Creality3D Ender 3 with 4mm simple glass plate; - SilverGrey SUNLU PLA+ 1.75mm; - 0.4mm standard brass nozzle at 208°C; - Bed 60° with classic hairspray.
Topics: cup_holder, drink, cup, dispenser, thingiverse, office, organizer, plastic_cup, cup_dispenser,...
6
6.0
Jan 20, 2021
01/21
by
jam orangeteacher (orangeteacher)
data
eye 6
favorite 0
comment 0
Pokemon - Go 海豹球
Topics: pokemon, seal, thingiverse, cartoon, Toys & Games, animal, stl
6
6.0
Jan 20, 2021
01/21
by
jam orangeteacher (orangeteacher)
data
eye 6
favorite 0
comment 0
Pokemon - 千針魚
Topics: pokemon, Toys & Games, stl, thingiverse
6
6.0
Jan 20, 2021
01/21
by
Carlo Steiner (carlosteiner)
data
eye 6
favorite 0
comment 0
Holder for Capsulì, nespresso compatible home filled capsules.
Topics: Kitchen & Dining, stl, thingiverse
6
6.0
Apr 18, 2021
04/21
by
evgeny evgeny (evgeny6891)
data
eye 6
favorite 0
comment 0
держатель светильника для квадратной трубы 20мм болты: м8-2 шт,м6-2 шт,м4-2 шт.
Topics: Other, thingiverse, stl
6
6.0
Jan 20, 2021
01/21
by
Andreas L. (oobdoo)
data
eye 6
favorite 0
comment 0
Ein kleiner Schutz für die Terrassentür.
Topics: DIY, stl, thingiverse
7
7.0
Jan 20, 2021
01/21
by
Grégory HARGOUS (gregland)
data
eye 7
favorite 0
comment 0
Support pour 2 cigarettes électroniques pour porte gobelet de voiture. Conçu pour cigarette VapBus 80W et pour Dacia Duster 1 compatible aussi avec Duster 2018 16-02-2019 : Ajout d'une version avec jeton cadis ou pièces
Topics: stl, thingiverse, car, ecigarette, Organization, duster, voiture, dacia
6
6.0
Jan 20, 2021
01/21
by
Ana Sánchez (dbtmerida)
data
eye 6
favorite 0
comment 0
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, customized, stl, thingiverse
5
5.0
Jan 21, 2021
01/21
by
TAHIR SYLVAIN (altaar)
data
eye 5
favorite 0
comment 0
Il s'agit de connecteur que j'ai redessiné moi-même sur Tinkercad. Ces connecteurs m'ont permis de fabriquer un caisson pour imprimante 3D composé de : - Profilé aluminium 20x20 B-Typ rainure 6 - vitre en verre de 4mm d'épaisseur. Les connecteurs en forme de cube vous permettent d'assembler vos barres d'aluminium. J'ai utilisé les vis suivantes pour assembler les cubes avec les profilés aluminium : - Vis autotaraudeuse à tête fraisée S6x16 B-Type rainure 6 Il y 2 types de cube...
Topics: DIY, stl, thingiverse
8
8.0
Mar 10, 2021
03/21
by
Frank Windt (windelwilli)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:45424 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=45424
Topics: customized, stl, thingiverse, Household
8
8.0
Apr 28, 2021
04/21
by
David Solera (Pelu)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:1068400 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1068400
Topics: stl, thingiverse, customized, R/C Vehicles
8
8.0
Apr 28, 2021
04/21
by
Hai Fisch (haifisch1896)
data
eye 8
favorite 0
comment 0
Zu drucken mit dem Material Eurer Wahl. Ich empfehle PLA. Print with the material of your choice. I prefer PLA. Infill: 10% Temp: ~200°C Layer: 0.15 for 00h43m, 0.1 for ~01h10m per piece Skirt: √ Support: √ --- Schaut auch in meinen Blog! View my blog! https://haifischdruckt.wordpress.com
Topics: haken, Household, thingiverse, hook, Gardinen, window, stl, curtain, Fenster
8
8.0
Apr 28, 2021
04/21
by
Stephan Moldenhauer (Steveone78)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, stl, thingiverse, customized
8
8.0
Apr 28, 2021
04/21
by
Stephan Moldenhauer (Steveone78)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, stl, thingiverse, customized
8
8.0
Apr 28, 2021
04/21
by
javier gongora (Javogongora)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, stl, thingiverse, customized
8
8.0
Apr 28, 2021
04/21
by
Gerald Bachner (geri1403)
data
eye 8
favorite 0
comment 0
Guide for ISOFIX car seats. This is a shorter Version of this: http://www.thingiverse.com/thing:1321649 It fits perfect in my Ford Focus.
Topics: thingiverse, ford_focus, Kindersitz, Isofix, child_seat, stl, Automotive, car_seat
8
8.0
Apr 28, 2021
04/21
by
Nicart Geoffroy (AuthariX)
data
eye 8
favorite 0
comment 0
RC Pilot vous propose de récupérer les éléments du "PLA du jour" L'article de Novembre 2016 : le PLA du jour.
Topics: stl, thingiverse, Hand Tools
8
8.0
Apr 28, 2021
04/21
by
david zouari (dadzzzz)
data
eye 8
favorite 0
comment 0
Pour raccorder deux tubes en PVC à 45 degrés
Topics: stl, thingiverse, Household
8
8.0
Apr 28, 2021
04/21
by
Cécile Delaive (ciboum)
data
eye 8
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
Topics: Keychains, stl, thingiverse, customized