The results of all the major program phases of the program are reported. All goals of the program, which are listed were successfully accomplished and are briefly described. A complete list is included of all drawings generated during this program.
Topics: NASA Technical Reports Server (NTRS), SOLAR ARRAYS, SPACE STATIONS, TECHNOLOGY ASSESSMENT,...
The design and testing of a heat pipe for spacecraft application is presented. The application in mind calls for heat loads up to 20 watts, a set-point temperature of 294K, and a sink that varies from -220K to nearly as high as the set-point. The overall heat pipe length is 137 cm. Two basically different mechanisms of achieving variable conductance in the pipe by vapor-flow throttling were studied. In one, the thermal resistance between the heat source and sink is due to a...
Topics: NASA Technical Reports Server (NTRS), DESIGN ANALYSIS, HEAT PIPES, PERFORMANCE TESTS, ENGINEERING...
Information on the solar energy system installed at the new municipal building for the City of Abbeville, SC is presented, including a description of solar energy system and buildings, lessons learned, and recommendations. The solar space heating system is a direct air heating system. The flat roof collector panel was sized to provide 75% of the heating requirement based on an average day in January. The collectors used are job-built with two layers of filon corrugated fiberglass FRP panels...
Topics: NASA Technical Reports Server (NTRS), ENERGY POLICY, SOLAR ENERGY CONVERSION, SOLAR HEATING, SOUTH...
Installation procedures for the single family residential solar heating system at the William O'Brien State Park, Stillwater, Minnesota, are presented. The system is a solar-assisted, hydronic-to-warm-air system with solar-assisted domestic water heating. It is composed of the following major components: liquid cooled flat plate collectors; water storage tank; passive solar-fired domestic water preheater; electric hot water heater; heat pump with electric backup; solar hot water coil unit;...
Topics: NASA Technical Reports Server (NTRS), INTEGRATED ENERGY SYSTEMS, MINNESOTA, SOLAR HEATING, SPACE...
The problem of automatic drawing was investigated in two ways. First, a DAB model of drawing processes was introduced. DAB stands for three types of knowledge hypothesized to support drawing abilities, namely, Drawing Knowledge, Assimilated Knowledge, and Base Knowledge. Speculation concerning the content and character of each of these subsystems of the drawing process is introduced and the overall adequacy of the model is evaluated. Second, eight experts were each asked to understand six...
Topics: NASA Technical Reports Server (NTRS), ARTIFICIAL INTELLIGENCE, COMPUTER GRAPHICS, COMPUTER...
This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.
Topics: NASA Technical Reports Server (NTRS), MECHANICAL ENGINEERING, CONTROLLERS, MICROELECTRONICS,...
Information used to evaluate the design of a solar heating, cooling, and domestic hot water system is given. A conventional heat pump provides summer cooling items as the design data brochure, system performance specification, system hazard analysis, spare parts list, and detailed design drawings. A solar system is installed in a single-family dwelling at Akron, Ohio, and at Duffield, Virginia.
Topics: NASA Technical Reports Server (NTRS), SOLAR COOLING, SOLAR HEATING, SOLAR HOUSES, SYSTEMS...
Construction of large systems in space is a technology requiring the development of construction methods to deploy, assemble, and fabricate the elements comprising such systems. A construction method is comprised of all essential functions and operations and related support equipment necessary to accomplish a specific construction task in a particular way. The data base objective is to provide to the designers of large space systems a compendium of the various space construction methods which...
Topics: NASA Technical Reports Server (NTRS), CONSTRUCTION, DATA BASES, SPACE MANUFACTURING, STRUCTURAL...
The mounted, preloaded contact angle of the structural bearings in the assembled design mechanical assembly was measured. A modification of the Turns method is presented, based upon the clarity and definition of moving parts achieved with X-ray technique and cinematic display. Contact angle is estimated by counting the number of bearings passing a given point as a function of number of turns of the shaft. Ball and pitch diameter variations are discussed. Ball train and shaft angle uncertainties...
Topics: NASA Technical Reports Server (NTRS), BALL BEARINGS, CINEMATOGRAPHY, ROTATING SHAFTS, SATELLITE...
Expert systems are successfully applied to solve recurring NASA Space Shuttle orbiter payload integration problems. Recurrence of these problems is the result of each Space Shuttle mission being unique. The NASA Space Shuttle orbiter was designed to be extremely flexible in its ability to handle many types and combinations of satellites and experiments. This flexibility results in different and unique engineering resource requirements for each of the payload satellites and experiments. The...
Topics: NASA Technical Reports Server (NTRS), EXPERT SYSTEMS, REAL TIME OPERATION, SPACE SHUTTLE PAYLOADS,...
207
207
Jul 6, 2010
07/10
by
GUPALO, A. I
texts
eye 207
favorite 0
comment 0
HEAT CONDUCTIVITY, TEMPERATURE CONDUCTIVITY, AND VOLUME HEAT CAPACITY WERE DETERMINED FOR THE SOUTHERN CHERNOZEM REGION AS A FUNCTION OF ITS DENSITY AND MOISTURE. THESE PROPERTIES WERE FOUND TO VARY WITH THE STAGE OF SOIL MOISTENING. IT IS CONCLUDED THAT THE MECHANISM OF HEAT CONDUCTIVITY OF MOIST SOIL DEPENDS UPON THE MECHANISM OF MOISTURE CONDUCTIVITY AND ON THE CHARACTER OF WATER BINDING BY SOIL PARTICLES.
Topics: HELICOPTERS, ROTARY WINGS, STRESS ANALYSIS, STRUCTURAL ANALYSIS, ENGINEERING DRAWINGS, VIBRATION...
5,436
5.4K
Jul 11, 2010
07/10
by
NON
texts
eye 5,436
favorite 0
comment 0
Volume 2 contains data resulting from surveys of 61 military and civilian populations of both sexes from the U.S., Europe, and Asia. Some 295 measured variables are defined and illustrated.
Topics: ANTHROPOMETRY, SIZE DETERMINATION, SPACECRAFT DESIGN, SPACECRAFT ENVIRONMENTS, BODY SIZE (BIOLOGY),...
This Standard Engineering Installation Package (SEIP) is prepared for projects which require overall standardization for implementation by communications-electronics commands in various parts of the world. It is used for guidance in preparing an Engineering Installation Package (EIP) for a specific site, tailored to its peculiar requirements. This SEIP provides guidance for selecting, acquiring, and installing key telephone systems equipment. This SEIP also contains site survey information,...
Topics: DTIC Archive, ARMY COMMUNICATIONS COMMAND FORT HUACHUCA ARIZ, *TELEPHONE SYSTEMS, *INSTRUCTION...
The requirements for the design and performance of the Solar 2 Collector Subsystem developed for use in solar heating of single family residences and mobile homes are presented. Installation drawings are included.
Topics: NASA Technical Reports Server (NTRS), ENERGY TECHNOLOGY, SOLAR COLLECTORS, SOLAR HEATING, DESIGN...
Network-Centric Warfare (NCW) is a theory of war in the information age that hypothesizes that forces, which exploit networked conditions better than their adversaries will achieve tactical advantage. Understanding how Network-Centric Systems (NCS) that support NCW are acquired is essential for the continued development and delivery of systems that are affordable, meet end-user requirements, and that can be fielded quickly. The Network-Centric Acquisition Process (NCAP) will enable the DoD to...
Topics: DTIC Archive, NAVAL POSTGRADUATE SCHOOL MONTEREY CA, *DEFENSE SYSTEMS, *ACQUISITION, *SYSTEMS...
The U.S. Army Armament R and D Command, ARRADCOM, awarded Contract DAAK10-77-C-0048 on 15 April 1977 for the continued development of the M-130 Aircraft General Purpose Dispenser including the fabrication and delivery of associated payload, the M-1 chaff, M-796 Impulse Cartridge, and M-206 Flares. (Author)
Topics: DTIC Archive, Dube,Victor, TRACOR INC AUSTIN TEX, *CHAFF DISPENSERS, *FLARES, TEST AND EVALUATION,...
143
143
Jun 9, 2011
06/11
by
Namkung, M.; Fulton, J. P.; Wincheski, B.; Clendenin, C. G
texts
eye 143
favorite 0
comment 0
A major part of fracture mechanics is concerned with studying the initiation and propagation of fatigue cracks. This typically requires constant monitoring of crack growth during fatigue cycles which necessitates automation of the whole process. If the rate of crack growth can be determined the experimenter can vary externally controlled parameters such as load level, load cycle frequency and so on. Hence, knowledge of the precise location of the crack tip at any given time is very valuable....
Topics: SPACE SHUTTLES, SPACE SHUTTLE BOOSTERS, LANDING GEAR, GROUND HANDLING, GROUND CREWS, ENGINEERING...
Under this contract Southern Research Institute (SoRI) has developed the High Concentration Standard Aerosol Generator (HCSAG) system with novel and frequently needed capabilities: high concentration, high flowrate, narrow size distribution, and particle size greater than 1 micron. This report describes the development of the HCSAG and serves as the instrument manual for the instrument. Section II (Operating Principle) gives the design criteria as well as describing the basic mechanisms upon...
Topics: DTIC Archive, Farthing,William E, SOUTHERN RESEARCH INST BIRMINGHAM AL, *AEROSOL GENERATORS,...
The activities leading to the completion of detail design of the MOD-1 wind turbine generator are described. Emphasis is placed on the description of the design as it finally evolved. However, the steps through which the design progressed are also traced in order to understand the major design decisions.
Topics: NASA Technical Reports Server (NTRS), ENERGY POLICY, SYSTEMS ENGINEERING, TURBINES, WINDPOWERED...
The use of geosynchronous tracking and data relay satellites (TDRS) which can serve both low data rate users at VHF and high data rate users at other frequencies is considered. The effects of radio frequency interference from the earth and of multipath propagation due to reflections from the earth are expected to pose problems for the TDRS system at VHF. Investigations suggest several modulation techniques that offer promise to overcome these problems. This report provides a complete design of...
Topics: NASA Technical Reports Server (NTRS), MODULATION, RADIO FREQUENCY INTERFERENCE, TDR SATELLITES,...
Over the past thirty years, significant technological improvements have been made in materials need for ballistic protection. Incorporations of this cutting edge body armor technology will pay off with reduced thermal burden, diminished aircrew fatigue, and increased human performance. A review of existing work done by the US Navy and US Army on body armor was completed. The US Army's Survival and Rescue Vest Integrated packets (SARVIP) program has completed the entire acquisition process and...
Topics: DTIC Archive, Diesel, Donald A., ARMSTRONG LAB BROOKS AFB TX CREW SYSTEMS DIRECTORATE, *FLIGHT...
HPCs (high-performance computers) utilize multiple (e.g. hundreds or thousands of) processors to compute very large problems quickly by distributing the computation across many processors in parallel. This liberates problem conceptualization from the memory/storage constraints of a single desktop workstation. Unfortunately, the complexity of programming HPCs is off-putting for new users. Furthermore, most DoD users work from a Windows PC so that learning Unix well enough to parallel program is...
Topics: DTIC Archive, OHIO SUPERCOMPUTER CENTER COLUMBUS, *USER FRIENDLY, *COMPUTATIONS, *WORKLOAD,...
Though many organizations have been studying the need for or emphasizing the need for a standard set of map symbols for large scale maps (1:240 to 1:4800), little to date has been done to develop a standardized legend. The main problems associated with producing a standard legend are: to provide a unique symbol for each feature, to be able to computer-program the symbols, to implement the standard once it is adopted, and the upkeep of the standard. These problems and their solutions are...
Topics: DTIC Archive, Jacober, Jr, Robert P., DEFENSE MAPPING AGENCY AEROSPACE CENTER ST LOUIS AFS MO,...
A management techniques report on wooden fences is provided as Section 5.2.4 of the US Army Corps of Engineers Wildlife Resources Management Manual. The report was prepared as a guide to assist Corps biologists and resource managers in the selection of fence designs and construction and installation techniques where wooden fences are desirable for wildlife and habitat management programs. Topics covered included wildlife value, placement, design and construction, and cautions and limitations. A...
Topics: DTIC Archive, Marcy,Larry E, ARMY ENGINEER WATERWAYS EXPERIMENT STATION VICKSBURG MS ENVIRONMENTAL...
Data Acceptance (DA) is defined as the means by which the Government officially accepts product or technical publication data from a contractor, based on the quality of the data. Quality is defined, for CALS engineering drawing data, as the clarity and fidelity of digital representation. The clarity and fidelity must be such that, when the data are retrieved from or reproduced at the repository, the user can read, interpret, and measure objects depicted in the drawing image area and clearly...
Topics: DTIC Archive, CALS TEST NETWORK WRIGHT-PATTERSON AFB OH, *COMPUTER PROGRAMS, *ACCEPTANCE TESTS,...
For abstract, see N74-20534. For complete abstract, see .
Topics: NASA Technical Reports Server (NTRS), ENGINEERING DRAWINGS, SPACE LOGISTICS, SPACE STORAGE,...
A description of the Common Lunar Lander (CLL) propulsion system is given. Among the topics discussed are the following: system characteristics, system mission requirements, key drivers to subsystem selection, system readiness level, and point design output. Additionally, a schematic of the system is provided.
Topics: NASA Technical Reports Server (NTRS), ENGINEERING DRAWINGS, LIQUID PROPELLANT ROCKET ENGINES, LUNAR...
The embankment criteria and performance report provides a summary record of significant design data, design assumptions, design computations, specification requirements, construction equipment, construction procedures, construction experience, field control and record control test data and embankment performance as monitored by instrumentation during construction and during initial lake filling. (Author)
Topics: DTIC Archive, ARMY ENGINEER DISTRICT LOUISVILLE KY, *EMBANKMENTS, MONITORING, OHIO, CONSTRUCTION,...
A Lagrangian has been developed that is equivalent to the full Navier Stokes (NS) equation for a three-dimensional, subsonic single-component fluid, including viscous pressure gradients and advective terms. Dissipation is incorporated into the Lagrangian by using hypercomplex fields for the velocity potentials. This Lagrangian has been used to derive a field-theory description of fluid flow based on a diagonalized Hamiltonian and the corresponding Poisson-bracket relations. Green's functions...
Topics: DTIC Archive, Becker, Roger J, DAYTON UNIV OH RESEARCH INST, *FLUID FLOW, *NAVIER STOKES EQUATIONS,...
From flight and mockup drawings of Spacelab 2 (SL 2) experiments and hardware, shop ready mockup drawings were produced. Floor panels were the first items considered for fabrication. Cold plate and orthogrid mockups were designed and fabricated. Experiment and other hardware mockups were fabricated of aluminum or plywood, depending on size and configuration. Eighty-three cable routing bracket mockups were fabricated of aluminum and delivered for painting.
Topics: NASA Technical Reports Server (NTRS), BRACKETS, ENGINEERING DRAWINGS, FLOORS, POWER LINES,...
Five high-gain, long-period seismograph stations are being installed, operated, and evaluated at sites in Alaska, Australia, Israel, Spain, and Thailand. Details of these installations are given in a series of five Technical Reports each entitled 'High-Gain, Long Period Seismograph Systems Installation Report.' These instruments are capable of operating at magnifications greater than 500,000 at periods of 35 to 45 seconds. The purpose of this report is to describe the instruments in detail,...
Topics: DTIC Archive, Sykes, Lynn, LAMONT-DOHERTY GEOLOGICAL OBSERVATORY PALISADES NY, *SEISMOLOGICAL...
This project concerned expedient upgrading of existing basements to provide some degree of protection against combined nuclear weapons effects, especially air blast; such shelter would be for critical workers remaining in risk areas during a crisis period. In this report, 'expedient' upgrading is that which can be accomplished within about a 24- to 48-hr warning period using indigenous labor and materials, and 'basements' are those that have at most small portion of any side exposed to blast or...
Topics: DTIC Archive, Murphy, H. L., Wiehle, C. K., Pickering, E. E., STANFORD RESEARCH INST MENLO PARK CA...
A schedule which is developed in phases is far more effective than a schedule which attempts a level of de tail beyond the progress of design. Prerequisites for scheduling that result in high performances by production processes and constant improvements in a scheduling system are: accurate information of material volume (total materials required) corresponding with each level of design development; a system for first assessing all materials required in large groups or units and, as each design...
Topics: DTIC Archive, TODD PACIFIC SHIPYARDS CORP SEATTLE WA, *SCHEDULING, *PROCUREMENT, *SHIPBUILDING,...
This manual establishes the essential requirements and reference documents for the preparation and revision of digital product definition data sets prepared for or by NASA at KSC. This volume is only applicable to KSC in-house programs/projects. These requirements do not apply to the preparation of illustrations, artwork, or figures in technical publications.
Topics: NASA Technical Reports Server (NTRS), DRAFTING (DRAWING), ENGINEERING DRAWINGS, COMPUTER AIDED...
Application of regeneration to the small gas turbine engine can provide a significant improvement in Army aircraft range capability and in fuel logistics. However, very little is known about regenerator performance when tested under actual operating conditions. This is especially true of regenerative engine-aircraft compatibility. The program was oriented toward gaining this experience. The program was divided into three phases. Phase I consisted of the design and fabrication of the regenerator...
Topics: DTIC Archive, Privoznik, Edward J, GENERAL MOTORS CORP INDIANAPOLIS IN ALLISON GAS TURBINE DIV,...
The objectives of this research were to identify the factors considered in determining whether reprocurement data are purchased and to provide general guidance to assist Air Force managers in deciding whether to buy reprocurement data. A survey questionnaire was administered to Air Logistics Center Engineering Data Section personnel. Using factor analysis, three factors were identified as effecting the decision, in general, to purchase reprocurement data: the usefulness of reprocurement data,...
Topics: DTIC Archive, Johnson,Robert L, AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOOL OF SYSTEMS...
The attached Preliminary Design Plan and Visualization Data is submitted for development of a 30 - 80 MHz directional log-periodic lightweight, transportable antenna for tactical field use. The Preliminary Design Plan interprets the technical parameters identified in the technical requirements. Each requirement is reduced to an item of material. Electrical characterisics of the antenna under development are described. Each electrical requirement as set forth in ECOM specification DS-EH-0050A(A)...
Topics: DTIC Archive, ELECTROSPACE SYSTEMS INC RICHARDSON TEX, *BROADBAND ANTENNAS, *LOG PERIODIC ANTENNAS,...
Increased development and competition in the computer-aided graphics industry has produced many advanced systems for architecture and engineering (A/E). However, this growth in technology has come without standardization, making it difficult or impossible to transfer data between dissimilar systems. Graphics translators are studied for potential in transferring A/E information from one system to another. Two types of translators are considered--direct and nuetral--with neutral formats showing...
Topics: DTIC Archive, Golish,L M, CONSTRUCTION ENGINEERING RESEARCH LAB (ARMY) CHAMPAIGN IL, *COMPUTER...
This project was initiated to explore diazo type compound with spectral response at 520 nm, and stability at ambient storage conditions. Such compounds would permit the direct copying of blue prints and result in major time and dollar savings to blueprint users including federal and municipal government agencies, the military, large and small industries and the construction industry. The photochemical sensitivity of the aromatic diazonium salts used in conventional diazo copying systems is...
Topics: DTIC Archive, Tally, Sidney K, FREQUENCY SYSTEMS INC NASHUA NH, *DIAZO COMPOUNDS, *NAPHTHALENES,...
To improve speed and maneuvering characteristics of the barge SEACON, the installation of additional power is under consideration. In this report, five candidate designs to accomplish this purpose are described. One design was eliminated early-on because of practical considerations. The remaining four designs were evaluated with regard to their impact on speed and maneuvering characteristics, conversion costs, and operating cost. Of the four candidates, the design recommended involves the shift...
Topics: DTIC Archive, GIANNOTTI AND ASSOCIATES INC ANNAPOLIS MD, *MARINE PROPULSION, *BARGES, VELOCITY,...
This report discusses ATOKON modules. Features of this document are: Definition of the main surfaces in the ship, Definition of cut-outs, Definition of profiles and stiffenings, Definition of plate seams and thicknesses, Simple input to the program, Complete list of profiles used on the surfaces, Easy updating of data due to topological description, Generation of detailed drawings of the surfaces, including profiles and seams.
Topics: DTIC Archive, Oigarden, Hans, SHIPPING RESEARCH SERVICES A/S OSLO (NORWAY), *COMPUTER PROGRAMS,...
We have conducted a body of work that examines weapon acquisition issues from a perspective that draws upon lessons learned from best practices in product development. Collectively, these practices comprise a process that is anchored in knowledge. Achieving the right knowledge at the right time enables leadership to make informed decisions about when and how best to move into various expensive acquisition phases. In essence, knowledge supplants risk over time. This building of knowledge...
Topics: DTIC Archive, GOVERNMENT ACCOUNTABILITY OFFICE WASHINGTON DC, *PRODUCTION CONTROL, *MEASUREMENT,...
The JSF program has delivered and flown the first development aircraft. However, cost and schedule goals established in the fiscal year 2004 rebaselined program have not been met. Total JSF program acquisition costs (through 2027) have increased by $31.6 billion and now DOD will pay 12 percent more per aircraft than expected in 2004. The program has also experienced delays in several key events, including the start of the flight test program, delivery of the first production representative...
Topics: DTIC Archive, GOVERNMENT ACCOUNTABILITY OFFICE WASHINGTON DC, *ACQUISITION, *INDUSTRIAL PRODUCTION,...
The Sketchpad system uses drawing as a novel means of communicating with a computer. The system contains input, output, and computation programs that enable it to interpret information drawn directly on a computer display. It has been used to draw electrical, mechanical, scientific, mathematical and animated drawings; it is a general-purpose system. Sketchpad has shown the most usefulness as an aid to the understanding of processes, such as the motion of link ages, which can be described with...
Topics: DTIC Archive, Sutherland, I E, MASSACHUSETTS INST OF TECH LEXINGTON LINCOLN LAB, *DISPLAY SYSTEMS,...
The L-5114 Experimental electrostatically-focused klystron with variable beam perveance was assembled and successfully exhausted without many major problems. Further work with the resistance network analogue was done to check the lens system on the extreme high side k=0.0000025 A/V to the 3/2 power of the variable beam perveance. Hot test of the tube was started and the initial results obtained look promising. Studies on a triple-gap extended interaction cavity were made. This cavity is scaled...
Topics: DTIC Archive, Luchsinger, T H, LITTON SYSTEMS INC SAN CARLOS CA ELECTRON TUBE DIV, *ELECTRON BEAMS,...
This Standard Engineering Installation Package (SEIP) assists project officers, logisticians, engineers, and technicians to program, procure, engineer, and install 48-V dc uninterruptible power facilities. The SEIP includes a discussion of principles of operation, bill of materials, installation instructions (including drawings), and test procedures. (Author)
Topics: DTIC Archive, ARMY COMMUNICATIONS COMMAND FORT HUACHUCA AZ, *MILITARY FACILITIES, *LEAD ACID...
The design and construction of an experimental strain/heating stage for the Cambridge Stereoscope Scanning Electron Microscope is reported. The stage is of the parallel cross-head type driven by opposed power-screw pairs. Complete machine drawings for the major components of the stage are included. The design has been tested by carrying out experiments on shape-memory-effect alloys and annealed brass specimens. (Author)
Topics: DTIC Archive, Campbell,Richard, *ELECTRON MICROSCOPES, *ELECTRON MICROSCOPY, STRESSES, SYSTEMS...
The design and construction of an experimental strain/heating stage for the Cambridge Stereoscope Scanning Electron Microscope is reported. The stage is of the parallel cross-head type driven by opposed power-screw pairs. Complete machine drawings for the major components of the stage are included. The design has been tested by carrying out experiments on shape-memory-effect alloys and annealed brass specimens. (Author)
Topics: DTIC Archive, Campbell,Richard, NAVAL POSTGRADUATE SCHOOL MONTEREY CA, *ELECTRON MICROSCOPES,...
The program objective was to develop a 270 vdc, 45 kw generator- controller system for a 9,000 to 18,000 rpm speed range, and to establish a data base sufficient to prove the feasibility of a 270 vdc electrical system as the primary aircraft electrical power. The 270 vdc system developed by AiResearch consists of a permanent-magnet generator with an internal cooling and lubricating system, a phase delay controlled thyristor rectifier, and a microprocessor-monitored protection unit. Functional...
Topics: DTIC Archive, Denk, Joseph, AIRESEARCH MFG CO TORRANCE CA, *AIRCRAFT EQUIPMENT, *DIRECT CURRENT,...
The U.S. Army Corps of Engineers Construction Engineering Research Laboratory is developing the Computer-Aided Engineering and Architectural Design System (CAEADS) to support the design of military facilities. CAEADS' support will start with initial requirements for a facility, and continue through concept and final design and the production of construction drawings, specifications and cost estimates. The CAEADS system will be integrated based on a central source of design information used by...
Topics: DTIC Archive, Spoonamore,Janet H, CONSTRUCTION ENGINEERING RESEARCH LAB (ARMY) CHAMPAIGN IL,...
