174
174
May 6, 2010
05/10
by
Hochgraf, N
texts
eye 174
favorite 0
comment 0
Grinding out pockets in solid blocks of glass to produce lightweight ribbed structures for mirror blanks
Topics: BLANKS, FILLETS, GLASS, GRINDING, MIRRORS, GLASS, GRINDING, MIRROR
2
2.0
Jan 10, 2021
01/21
by
(kineticsurfaces)
data
eye 2
favorite 0
comment 0
Need a solid tumbler, pen holder or bathroom caddy? This hexagonal diamond faceted cup is for you. It feels great in your hands and looks even better in your home or office. Measures 75mm x 75mm (3" x 3")
Topics: container, thingiverse, pattern, stl, tumblers, faceted, fillets, triangulated, organization,...
A survey of temperature, heat-flux, and pressure measurements was obtained at speeds through Mach 8.0 on the second flight of the Pegasus air-launched space booster system. All sensors were distributed on the wing-body fairing or fillet. Sensors included thin foil-gauge thermocouples installed near the surface within the thermal protection system. Thermocouples were also installed on the surface of nonablating plugs. The resulting temperature time history allowed derivation of convective heat...
Topics: NASA Technical Reports Server (NTRS), AEROTHERMODYNAMICS, BODY-WING CONFIGURATIONS, HEAT FLUX,...
Improvements in spiral-bevel gear design were investigated to support the Army/NASA Advanced Rotorcraft Transmission program. Program objectives were to reduce weight by 25 percent, reduce noise by 10 dB, and increase life to 5000 hr mean-time-between-removal. To help meet these goals, advanced-design spiral-bevel gears were tested in an OH-58D helicopter transmission using the NASA 500-hp Helicopter Transmission Test Stand. Three different gear designs tested included: (1) the current design...
Topics: NASA Technical Reports Server (NTRS), BENDING FATIGUE, GEAR TEETH, GEARS, HELICOPTER PROPELLER...
Aerodynamic, heat transfer, and system design studies to determine removable modifications for the Space Shuttle orbiter that would extend its forward center-of-gravity triom capability are summarized. Wind-tunnel tests were conducted at Mach numbers ranging from 0.25 to 20.3 to determine the most effective aerodynamic modifications. Heat transfer and system design studies determined the impact of the modifications on the thermal protection system and structural weight of the vehicle. The most...
Topics: NASA Technical Reports Server (NTRS), AERODYNAMIC CONFIGURATIONS, CANARD CONFIGURATIONS, CENTER OF...
2
2.0
Jan 12, 2021
01/21
by
Sean Goodman (amarand)
data
eye 2
favorite 0
comment 0
As Oprah would say: "YOU get a fillet, YOU get a fillet, EVERYBODY gets a fillet!" I lost count after the first few. There are many fillets in this model, of various sizes and types. This is a raccoon bowl. I have hungry raccoons in my backyard, and I am clearly crazy that I want to feed them. But I do. Here's a timelapse video of about an hour compressed down into two minutes, if you'd like to see night vision raccoons: https://youtu.be/4aq2v68vPWc My next version will have...
Topics: remix, cat, fillets, raccoon, cat bowl, fillet craziness, whiskers, bowl, cute, raccoon_bowl,...
A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the effect of wing fillets on the global vortex-induced surface static pressure field about a sharp leading-edge 76 deg/40 deg double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0...
Topics: NASA Technical Reports Server (NTRS), STRAKES, DELTA WINGS, AERODYNAMIC CONFIGURATIONS, WIND TUNNEL...
1
1.0
Mar 10, 2021
03/21
by
Nicholas Williams (WilliamsOb)
data
eye 1
favorite 0
comment 0
This module accepts 3 points and a radius value and draws an arc of the supplied radius at the middle point as a polygon. Since it can't know what side of the angle should be filled, it assumes you're supplying the points in a clockwise manner. There is a 5th parameter for the number of segments to use when drawing the arc. This module uses my 2dWedge module [here](http://www.thingiverse.com/thing:1843282) as a dependency - make sure you download all the files on this page.
Topics: library, openscad_script, openscad, openscad_modules, stl, thingiverse, 3D Printing,...
3
3.0
Aug 19, 2019
08/19
by
Elijah, Angela
texts
eye 3
favorite 0
comment 0
11 leaves : 27 cm
Topics: Fish fillets, Carving (Meat, etc.)
154
154
May 31, 2011
05/11
by
Sauvageau, Donald R
texts
eye 154
favorite 0
comment 0
As part of the continuing effort to identify approaches to improve the safety and reliability of the Space Shuttle system, a Five-Segment Booster (FSB) design was conceptualized as a replacement for the current Space Shuttle boosters. The FSB offers a simple, unique approach to improve astronaut safety and increase performance margin. To determine the feasibility of the FSB, a Phase A study effort was sponsored by NASA and directed by the Marshall Space Flight Center. This study was initiated...
Topics: BOLTS, X-33 REUSABLE LAUNCH VEHICLE, DEBONDING (MATERIALS), DEFECTS, JOINTS (JUNCTIONS), SANDWICH...
0
0.0
Jan 17, 2021
01/21
by
Riley Bouchard (The_Real_Robo)
data
eye 0
favorite 0
comment 0
Whether you need to mark out a rounded corner on the inside edge of a part you are making or measure out a fillet on an object you need a part to fit around, the fillet square is the right tool for the job. It includes four common fillet/round sizes: 1/8", 1/4", 1/2", 1". Just place, trace, and make.
Topics: measuring, gauge, round, measurement_tool, thingiverse, measurement, fillet_gauge, fillet, Art...
Port of the wonderful puzzle game Fish Fillets This item contains old versions of the Arch Linux package for fillets-ng . Website of the upstream project: http://fillets.sf.net/ License: GPL See the Arch Linux Archive documentation for details.
Topics: archlinux, archlinux package, fillets-ng
The magnitude and variation of tooth pair compliance with load position affects the dynamics and loading significantly, and the tooth root stressing per load varies significantly with load position. Therefore, the recently developed time history, interactive, closed form solution for the dynamic tooth loads for both low and high contact ratio spur gears was expanded to include improved and simplified methods for calculating the compliance and stress sensitivity for three involute tooth forms as...
Topics: NASA Technical Reports Server (NTRS), DYNAMIC LOADS, GEAR TEETH, MODULUS OF ELASTICITY, STRESS...
Vortex flows produced by submersibles typically unfavorably influence key figures of merit such as acoustic and nonacoustic stealth, control effectiveness/maneuverability, and propulsor efficiency/body drag. Sources of such organized, primarily longitudinal, vorticity include the basic body (nose and sides) and appendages (both base/intersection and tip regions) such as the fairwater, dive planes, rear control surfaces, and propulsor stators/tips. Two fundamentally different vortex control...
Topics: NASA Technical Reports Server (NTRS), BOUNDARY LAYER CONTROL, CONTROL SURFACES, FLOW DISTRIBUTION,...
Spur gear stress analysis results are presented for a variety of loading conditions, support conditions, root radii, and rime thicknesses. These results are obtained using the SAP-IV finite element code. The maximum stresses, occurring at the root surface, substantially increase with decreasing rim thickness for partially supported rims (that is, with loose fitting hubs). For fully supported rims (that is, with tight fitting hubs), the root surface stresses slightly decrease with decreasing rim...
Topics: NASA Technical Reports Server (NTRS), FILLETS, GEARS, RIMS, STRESS ANALYSIS, FINITE ELEMENT METHOD,...
A test was conducted in the 15 cm x 15 cm supersonic wind tunnel at NASA Glenn Research Center that focused on corner effects of an oblique shock-wave/boundary-layer interaction. In an attempt to control the interaction in the corner region, eight corner fillet configurations were tested. Three parameters were considered for the fillet configurations: the radius, the fillet length, and the taper length from the square corner to the fillet radius. Fillets effectively reduced the boundary-layer...
Topics: NASA Technical Reports Server (NTRS), FILLETS, CORNERS, OBLIQUE SHOCK WAVES, SHOCK WAVE...
A survey of temperature measurements at speeds through Mach 8.0 on the first flight of the Pegasus air-launched booster system is discussed. In addition, heating rates were derived from the temperature data obtained on the fuselage in the vicinity of the wing shock interaction. Sensors were distributed on the wing surfaces, leading edge, and on the wing-body fairing or fillet. Side-by-side evaluations were obtained for a variety of sensor installations. Details of the trajectory reconstruction...
Topics: NASA Technical Reports Server (NTRS), AEROTHERMODYNAMICS, BODY-WING CONFIGURATIONS, HEATING,...
166
166
Jun 2, 2011
06/11
by
Rabin, Ro
texts
eye 166
favorite 0
comment 0
This viewgraph presentation provides the results of a survey of 1450 professionals employed by organizations in the remote sensing industry. The survey asked participants about the status of the industry.
Topics: ADHESIVE BONDING, CRACKING (FRACTURING), BONDED JOINTS, LAP JOINTS, FINITE ELEMENT METHOD, STRESS...
Thesis (B.S.)--University of Illinois, 1912
Topics: Fillets (Engineering), Cast-iron, Machine parts, Theses
217
217
May 31, 2011
05/11
by
Maida, James C.; Novak, M. S. Jennifer; Mueller, Kristia
texts
eye 217
favorite 0
comment 0
Camera based tasks are commonly performed during orbital operations, and orbital lighting conditions, such as high contrast shadowing and glare, are a factor in performance. Computer based training using virtual environments is a common tool used to make and keep CTW members proficient. If computer based training included some of these harsh lighting conditions, would the crew increase their proficiency The project goal was to determine whether computer based training increases proficiency if...
Topics: MICROGRAVITY, MICROSTRUCTURE, ENVIRONMENTAL TESTS, C-135 AIRCRAFT, GRAVITATIONAL EFFECTS,...
Selection of the best shape of a fillet in a tension bar such that no yielding occurs has long attracted the attention of engineers. Dimensions and notations for the bar and fillet are shown. With symmetry, only the upper half of the bar is considered. The optimal design problem is to find a boundary shape to minimize the total area of the fillet such that no yielding occurs. The classical boundary value problem is reduced to a variational or energy related problem which not only has excellent...
Topics: NASA Technical Reports Server (NTRS), BARS, BOUNDARY VALUE PROBLEMS, FILLETS, FINITE ELEMENT...
0
0.0
Apr 4, 2021
04/21
by
(toxi)
data
eye 0
favorite 0
comment 0
Test object for a new Clojure based generative voxel modelling tool chain with support for automatic hollowing of solids and construction of parametric internal micro-structures using implicit surface functions. The scale of the fillets is freely configurable (in code, not in the uploaded STL of course) and can even be applied recursively as shown in the second thing.
Topics: thingiverse, fractal, 3d, generative, fillets, microstructures, stl, metamaterial, 3D Printing...
Topics: Tables, Iron and iron alloy, Paris, 1781, Oak, France, Amaranth, Wood, Holly, Borders, Mechanical...
204
204
Aug 2, 2010
08/10
by
Rood, Richard B.; Douglass, Anne R.; Geller, Marvin A.; Kaye, Jack A.; Nielsen, J. Eric; Rosenfield, Joan E.; Stolarski, Richard S
texts
eye 204
favorite 0
comment 0
In the past two years constituent transport and chemistry experiments have been performed using both simple single constituent models and more complex reservoir species models. Winds for these experiments have been taken from the data assimilation effort, Stratospheric Data Analysis System (STRATAN).
Topics: BOUNDARY LAYERS, FLOW MEASUREMENT, LOW SPEED, PRESSURE SENSORS, RADII, CASCADE FLOW, COMPRESSORS,...
Fillet size is discussed in terms of theoretical or design dimensions versus as-welded dimensions, drawing attention to the inherent conservatism in the design load sustaining capabilities of fillet welds. Emphasis is placed on components for the solid rocket motor, external tank, and other aerospace applications. Problems associated with inspection of fillet welds are addresses and a comparison is drawn between defect counts obtained by radiographic inspection and by visual examination of the...
Topics: NASA Technical Reports Server (NTRS), ALUMINUM ALLOYS, EXTERNAL TANKS, FILLETS, SHEAR STRENGTH,...
Data files for the port of the wonderful puzzle game Fish Fillets This item contains old versions of the Arch Linux package for fillets-ng-data . Website of the upstream project: http://fillets.sf.net/ License: GPL See the Arch Linux Archive documentation for details.
Topics: archlinux, archlinux package, fillets-ng-data
0
0.0
Apr 12, 2021
04/21
by
Mike (mike_mattala)
data
eye 0
favorite 0
comment 0
This library generates basic fillets using the following functions: - linear_fillet (straight edges) - corner_fillet (90 degree corners) - ring_fillet (cylinders - inside and outside) - profile (generates the 2d profile used to set the fillet shape) There are more advanced fillet libraries and functions available such as the excellent: https://github.com/clothbot/ClothBotCreations/blob/master/utilities/fillet.scad however, sometimes you just need a basic fillet with a low computational overhead...
Topics: thingiverse, openscad, fillets, openscad_library, stl, Parts, fillet, library
0
0.0
Apr 8, 2021
04/21
by
(TakeItAndRun)
data
eye 0
favorite 0
comment 0
// This routine creates a fillet between two arbitrary shapes. // It works by expanding each shape by some distance and then creating a very thin shell around these expanded shapes. These two shells are then intersected to give one point along the fillet. The distances are chosen so that, for a two shapes that intersect under right angle, these intersection points lie on a quarter circle, with fn_fillet=16 faces. // The hull() command is then used to hull two adjacent intersection points...
Topics: fillets, shell, fillet, stl, Other, thingiverse, openscad, bevel, minkowski, beveled
A flow visualization study of the vortical flow over a cropped double-delta wing model with sharp leading edges and its three derivatives with small geometric modifications (fillets) at the strake wing junction was conducted in the Naval Postgraduate School water tunnel using the dye-injection technique. The fillets increased the wing area of the baseline model by 1%. The main focus of this study was to evaluate the effect of fillets on vortex core trajectories, interactions and breakdown on...
Topic: High angle-of-attack aerodynamics, effects of fillets on vortex core trajectories, interaction and...
25
25
Mar 23, 2021
03/21
by
Omega Publishing Group
software
eye 25
favorite 0
comment 0
DVD příloha k časopisu Score 200 z října 2010. DVD coverdisc from Score magazine issue 200 from October 2010. Mastering Codes: SCORE 200 DISK 1 SCORE 200 DISK 3 Plné Hry Numen: Contest of Heroes Fish Fillets Puzzle Rocks Original War Be a King Be a King 2 Crystal Cave Classic Styrateg King Mania Archibald's Adventures Larva Mortus Jets'n'Guns Gumboy Crazy Adventures GODS: Lands of Infinity Ve stínu Havrana Air Conflicts Kust: Heretic Kingdoms Daemonica Polda 2 Zulu's Zoo
Topics: score, score dvd, Numen: Contest of Heroes, Fish Fillets, Original War, Polda 2, Ve stínu havrana
235
235
Jun 1, 2011
06/11
by
Bowen, Brent D.; Headley, Dean E
texts
eye 235
favorite 0
comment 0
The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline quality on combined multiple performance criteria. This current report, Airline Quality Rating 2002, reflects monthly Airline Quality Rating scores for 2001. AQR scores for the calendar year 2001 are based on 15 elements that focus on airline performance areas important to air travel consumers. The Airline Quality Rating 2002 is a summary of month-by-month quality ratings...
Topics: FINITE ELEMENT METHOD, MODULUS OF ELASTICITY, THIN WALLS, THICKNESS, INDEPENDENT VARIABLES,...
Two versions of the planetary reduction stages from U.S. Army OH-58 helicopter main rotor transmissions were tested at NASA Lewis. One sequential and one nonsequential planetary were tested. Sun gear and ring gear teeth strains were measured, and stresses were calculated from the strains. The alternating stress at the fillet of both the loaded and unloaded sides of the teeth and at the root of the sun gear teeth are reported. Typical stress variations as the gear tooth moves through mesh are...
Topics: NASA Technical Reports Server (NTRS), GEAR TEETH, LOAD DISTRIBUTION (FORCES), OH-58 HELICOPTER,...
Adhesively bonded lap joints involve dissimilar material junctions and sharp changes in geometry, possibly leading to premature failure. Although the finite element method is well suited to model the bonded lap joints, traditional finite elements are incapable of correctly resolving the stress state at junctions of dissimilar materials because of the unbounded nature of the stresses. In order to facilitate the use of bonded lap joints in future structures, this study presents a finite element...
Topics: NASA Technical Reports Server (NTRS), ADHESIVE BONDING, BONDED JOINTS, LAP JOINTS, FINITE ELEMENT...
50
50
movies
eye 50
favorite 0
comment 0
DVD příloha k lednovému číslu Levelu roku 2003 Plné hry Hostile Waters, Fish Fillets, Americas Army
Topics: level, level cz, level dvd, Hostile Waters, Fish Fillets, Americas Army
227
227
Jun 12, 2011
06/11
by
Li, Ruoxin; Gibble, Kur
texts
eye 227
favorite 0
comment 0
The design for RACE, a Rb-clock flight experiment for the ISS, is described. The cold collision shift and multiple launching (juggling) have important implications for the design and the resulting clock accuracy and stability. We present and discuss the double clock design for RACE. This design reduces the noise contributions of the local oscillator and simplifies and enhances an accuracy evaluation of the clock. As we try to push beyond the current accuracies of clocks, new systematic errors...
Topics: WIND TUNNEL TESTS, ANGLE OF ATTACK, MULTIENGINE VEHICLES, ASYMMETRY, ENGINE FAILURE, REPUBLIC...
0
0.0
Apr 13, 2021
04/21
by
Jons Collasius (Professional3D)
data
eye 0
favorite 0
comment 0
This a module for OpenSCAD to create a cube with rounded edges (fillets). It doesn't use minkowski or hull, thus it renders fast (enought). Usage: Like the build in module cube(), the first parameter is an array [x,y,z] The second, third, and fourth parameters are for the side, top and bottom fillet radius. They can be adresses with side=, top= and bottom=. Theese parameters work with arrays and take four values. Each value is the radius of the fillet on an edge, counted clockwise. The cube can...
Topics: thingiverse, openscadtutorial, openscad, fillets, stl, Other, scad_module, OpenSCAD_module, fillet,...
A method that involves the use of fictitious plate elements denoted b ridge plates has been developed for representing the stiffnesses of fillets in finiteelement calculations of deflections, stresses, and strains in structures. The bridge plates of the present method are re duced-order models of fillets that do not yield accurate stresses wi thin fillets but do make it possible to accurately calculate the dyna mic characteristics of the structure and to approximate the effects of fillets on...
Topics: NASA Technical Reports Server (NTRS), FILLETS, FINITE ELEMENT METHOD, APPROXIMATION, MATHEMATICAL...
The aerodynamic effects of fillet size in a low speed compressor cascade were experimentally studied. Two blade profiles were used during the experiment, namely a controlled diffusion blade and a double circular arc blade. Cascades were tested with three fillet radii and two boundary layer thicknesses over a large range of incidence angles. The cascade performance was determined by extensive downstream flow measurements using a two head, 5 hole pressure probe. Results differ significantly...
Topics: NASA Technical Reports Server (NTRS), BOUNDARY LAYERS, CASCADE FLOW, COMPRESSORS, DIFFUSION,...
With examples, we illustrate how implicitly specified surfaces can be used for grid generation with GridPro/az3000. The particular examples address two questions: (1) How do you model intersecting tubes with fillets? and (2) How do you generate grids inside the intersected tubes? The implication is much more general. With the results in a forthcoming paper which develops an easy-to-follow procedure for implicit surface modeling, we provide a powerful means for rapid prototyping in grid...
Topics: NASA Technical Reports Server (NTRS), ASYMPTOTIC METHODS, COMPUTATIONAL GEOMETRY, COMPUTER...
An experimental and analytical program to study the local design details of a typical T-shaped web/flange intersection made from a metal matrix composite is described. Loads creating flange bending were applied to specimens having different designs and boundary conditions. Finite element analyses were conducted on models of the test specimens to predict the structural response. The analyses correctly predict failure load, mode, and location in the fillet material in the intersection region of...
Topics: NASA Technical Reports Server (NTRS), DESIGN ANALYSIS, FATIGUE TESTS, FIBER COMPOSITES, FINITE...
The National Center for Microgravity Research, NASA Glenn Research Center, and NASA Johnson Space Center are conducting an experimental program to explore the influence of reduced gravity environments on the soldering process. An improved understanding of the effects of the acceleration environment is important to application of soldering during current and future human space missions. Solder joint characteristics that are being considered include solder fillet geometry, porosity, and...
Topics: NASA Technical Reports Server (NTRS), MICROGRAVITY, GRAVITATIONAL EFFECTS, SOLDERING, JOINTS...
9
9.0
Feb 20, 2021
02/21
by
Highliner
movies
eye 9
favorite 0
comment 0
Here is the Highliner Dinner Fillets Commercial from 1986
Topics: Highliner Dinner Fillets Commercial (1986), Highliner, Dinner, Fillets, Commercial, 1986
94
94
software
eye 94
favorite 0
comment 0
CD příloha k červencovému číslu Gamestaru z roku 1999
Topics: gamestar cz, gamestar cd, Fish Fillets
Procedures for automatic computation of wing-fuselage juncture geometry are described. These procedures begin with a geometry in wave-drag format. First, an intersection line is computed by extrapolating the wing to the fuselage. Then two types of filleting procedures are described, both of which utilize a combination of analytical and numerical techniques appropriate for automatic calculation. An analytical technique for estimating the added volume due to the fillet is derived, and an...
Topics: NASA Technical Reports Server (NTRS), BODY-WING CONFIGURATIONS, FILLETS, FUSELAGES, INSERTS, WAVE...
Closed form and finite element analyses are presented for axial direction and transverse direction dimensional stability of skin/stringer panels. Several sensitivity studies are presented to illustrate the influence of various design parameters on the dimensional stability of these panels. Panel geometry, material properties (stiffness and coefficient of thermal expansion), restraint conditions and local details, such as resin fillets, all combine to influence dimensional stability, residual...
Topics: NASA Technical Reports Server (NTRS), AIRCRAFT STRUCTURES, CURVED PANELS, DESIGN ANALYSIS,...
109
109
Dec 21, 2020
12/20
by
Computer Press
software
eye 109
favorite 0
comment 0
CD příloha k číslu 12/2003 časopisu Computer CD1 Mastering code: GZ O61037 CD 1/12 Mastering SID: IFPI LD02 Data-Side Mould SID:IFPI 5J26 CD2 Mastering code: GZ O60918 CD 2/12 Mastering SID: IFPI LD02 Data-Side Mould SID: IFPI 5J34 Na CD2 Fish Fillets Nefunkční cédéčko Redakce: Omlouváme se všem, kteří se v minulém čísle těšili na rybičky ve hře Fish Fillets. Během závěrečné fáze přípravy CD došlo k poškození instalačního souboru, který zcela...
Topics: computer cd, Fish Fillets
During operation of the NASA Glenn Research Center 15- by 15-Centimeter Supersonic Wind Tunnel (SWT), a significant, undesirable corner flow separation is created by the three-dimensional interaction of the wall and floor boundary layers in the tunnel corners following an oblique-shock/ boundary-layer interaction. A method to minimize this effect was conceived by connecting the wall and floor boundary layers with a radius of curvature in the corners. The results and observations of a trade...
Topics: NASA Technical Reports Server (NTRS), SUPERSONIC WIND TUNNELS, WIND TUNNEL TESTS, BOUNDARY LAYERS,...
A methodology has been developed that allows the use of plate elements instead of numerically inefficient solid elements for modeling structures with 90 degree fillets. The technique uses plate bridges with pseudo Young's modulus (Eb) and thickness (tb) values placed between the tangent points of the fillets. These parameters are obtained by solving two nonlinear simultaneous equations in terms of the independent variables rlt and twallt. These equations are generated by equating the rotation...
Topics: NASA Technical Reports Server (NTRS), FINITE ELEMENT METHOD, FILLETS, MATHEMATICAL MODELS,...
73
73
Dec 21, 2020
12/20
by
Computer Press
software
eye 73
favorite 0
comment 0
CD příloha k číslu 11/2003 časopisu Computer Mastering code: Computer 1103 Fish Fillets na CD měly poškozený master disk, použijte cd2 z čísla 12/2003 Fish Fillets on CD had corrupted master disc, use cd2 from issue 12/2003 instead
Topics: computer cd, Fish Fillets
Average elastic Von Mises equivalent stresses were calculated along the throat of a single lap fillet weld. The average elastic stresses were compared to initial yield and to plastic instability conditions to modify conventional design formulas is presented. The factor is a linear function of the thicknesses of the parent plates attached by the fillet weld.
Topics: NASA Technical Reports Server (NTRS), FILLETS, FINITE ELEMENT METHOD, NASTRAN, STRESS FUNCTIONS,...
