ملف تعريفي عن نظام البيوت الذكية
Topic: smart home
9
9.0
Jan 18, 2021
01/21
by
HP Hamp (FredericM)
data
eye 9
favorite 0
comment 0
If placed in a higher position in the room, the BOSCH Smart Home 360° Indoor Camera needs to be tilted forward to offer a good room overview. My camera is placed on a higher closet in the corner of the room. This required a foot with 12° incline. For your convenience to make own variations if needed, I added the base plate as separate STL.
Topics: smart_home, Camera, smart_home_camera, Bosch, thingiverse, camera_stand, stl
11
11
Jan 18, 2021
01/21
by
Oleksandr Masliuchenko (grafalex)
data
eye 11
favorite 0
comment 0
Standard european round socket boxes are too small to fit Xiaomi Aquara switch. It is possible to order [special 'chineese size' 86mm boxes](https://www.ebay.com/sch/i.html?_odkw=power+box+86&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xsocket+box+86.TRS0&_nkw=socket+box+86&_sacat=0) on ebay, but they require too big hole and hard to mount accurately into existing interior. So I designed something in between - big enough to fit Xiaomi Aquara switch, but not...
Topics: smart_home, xiaomi, aquara, thingiverse, xiaomi_Smart_home, box, DIY, stl, switch
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home light...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home light...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home light...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home light...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home light...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home signal...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home central...
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices, Smart home central...
Smart Home concept is to connect several devices to perform control and the device to be controlled to help any human needs. So it should have one device being Host and several devices being Client. The environment in this case is a home that there is too much technology that planted technologies that has much influence at human activities is called pervasive computing. The device communication should be has a protocol, at the research used UDP protocol because it doesn't need to negotiate...
Topics: LabView, MyRIO, Pervasive, Smart home, UDP
9
9.0
Mar 10, 2021
03/21
by
bofred (bofred)
data
eye 9
favorite 0
comment 0
Wall mount for xiaomi smart home Multifunctional gateway. It fits screwed in to a standard electrical in wall routing box (appliance box) with 60mm between the screw holes. I use white PLA 18% infill. Connected to cables soldered to the electrical pins coming out from the gateway. The pins are cut off and the surface of the soldered area/pins are covered in shrink tubes.
Topics: stl, thingiverse, xiaomi_Smart_home, Household
4
4.0
Mar 15, 2021
03/21
by
Hugh Dinwiddie (HDrMe)
data
eye 4
favorite 0
comment 0
This is a holder for 3 Flic v2 buttons
Topics: thingiverse, Electronics, Smart Home, stl, smartthings
214
214
Jan 13, 2021
01/21
by
Shriver Communications
software
eye 214
favorite 2
comment 0
HAL 2000 voice controlled smart home software for Windows 95 and X10-compatible devices. Contains a BIN/CUE image of the original CD-ROM. Requires the use of an X-10 Pro Two Way Powerline Interface connected via the serial port. Effort# C898 SKU# 980-0577
Topics: hal 2000, x10, smart home, shriver
4
4.0
Mar 10, 2021
03/21
by
Sergey Mashchenko (pulsar123)
data
eye 4
favorite 0
comment 0
These smart sensors detect water leaks by measuring resistance between two contacts (two M3 bolts). If a water leak is detected: * Local alarm goes off (loud piezo buzzer signals, blinking red LED) * All other identical water sensors throughout the house also sound alarm (loud piezo buzzer signals, number of red LED flashes in a sequence = sensor ID of the sensor were the leak was detected). For this, WiFi and MQTT server are required * Alarm is displayed in OpenHAB browser (or app) interface...
Topics: Electronics, smart home, stl, thingiverse, ESP8266
M. Misra, P. Singh (2020) Energy Optimization for Smart Housing Systems. Journal of Informatics Electrical and Elecrtonics Engineering , Vol. 01, Iss. 01, S. No. 5, pp. 1-6, 2020 . Smart home is an emerging technology which is growing continuously now. It integrates many of the new technologies with the help of home networking for improving human’s quality and standard of living, so there are many projects which are researching in diverse technologies in order to apply them to the...
Topics: Smart home, Wifi module, Raspberry pi
38
38
software
eye 38
favorite 0
comment 0
HomeApp is a small and easy to use smart home app with a simple framework. The goal of this application is to make remote execution of predefined features as easy and user-friendly as possible to help you get started with smart home technology. Supported devices - Philips Hue Bridge - Devices with a web interface - Devices using the SimpleHome API Features - Control your Philips Hue lights - Live preview of the current light color - Create, rename and delete scenes - Add devices to your home...
Topics: smart home app, f-droid signed apk
4
4.0
Mar 15, 2021
03/21
by
Hugh Dinwiddie (HDrMe)
data
eye 4
favorite 0
comment 0
This is a remix of https://www.thingiverse.com/thing:3284772 for those who'd like the 3-button option.
Topics: thingiverse, Smart Home, Electronics, stl, smartthings, smarthome
47
47
data
eye 47
favorite 0
comment 0
Smart home technology infographic vector Free Vector
Topic: Smart home technology infographic vector Free Vector
10
10.0
Jun 12, 2021
06/21
by
(arijaycomet)
data
eye 10
favorite 0
comment 0
Summary To install a Ring doorbell at my home I had to offset the location of the original doorbell button. Designed and created this bracket to allow no extra drilling and a secure build location. Two counter sunk holes attach the bracket at standard doorbell button location. The distance of the platform is for my house, but could easily be adjusted for your needs. Enjoy! (Edit Aug-28-2017 someone asked if I had Ring PRO files and I did, so I added those-- no changes have otherwise been made...
Topics: Ring, Smart_Home, thingiverse, Doorbell, Bracket, stl
17
17
data
eye 17
favorite 0
comment 0
Smart home technology infographic vector Free Vector
Topic: Smart home technology infographic vector Free Vector
6
6.0
Jun 21, 2021
06/21
by
Andrew Kotelnikov (333brain333)
data
eye 6
favorite 0
comment 0
This is a device for smart controlling curtain system. When it's too bright or if you sent an order to pull up the device spins the shaft and pulls up a curtain. If you are interested in code ESP8266 v12 then chat me via kotelnikovandrew@mail.com.
Topics: thingiverse, DIY, arduino, stl, ESP8266, curtain, Smart home
11
11
Jan 10, 2021
01/21
by
Briand Stephane (Alf83)
data
eye 11
favorite 0
comment 0
This is a support for Xiaomi smart home motion sensor.
Topics: thingiverse, stl, DIY, xiaomi_Smart_home, motion_sensor
4
4.0
Jan 6, 2021
01/21
by
Brian Yu (Barelyanything)
data
eye 4
favorite 0
comment 0
A printable version of the Nanoleaf canvas wall mount. It snap fits securely with no wobble and can be removed easily. You can use this with regular linker. - The screw hole fits 4mm diameter screws - There's enough clearance for 3mm screw head heights I personally do not use screws to mount them, I have a bunch of 10mm x 30mm x 2mm magnets lying around, and I just tape them on the 4 slots in the middle of each sides and attached them to my metal shelf.
Topics: smart home, stl, Decor, mount, lighting, LED, thingiverse
8
8.0
Jan 19, 2021
01/21
by
Jonas Jax (BadaBoom)
data
eye 8
favorite 0
comment 0
This adapter enables you to use the homematic and homematic_ip devices together with your Legrand light switches of the series Creo. Sadly there are no original adapters for this series of switches so I had to make my own. Print with supports at least at 0.2mm resolution (see yellow screenshot for the orientation). 1 x base, 1 x middle, 2 x clip. It all clips together, no need to apply any glue. Due to the slightly rugged surface of the prints it does not glide as smoothly as the original...
Topics: smart_home, thingiverse, Household, Homematic, adapter, stl, legrand
9
9.0
Apr 28, 2021
04/21
by
Ntrobotics (Ntrobot)
data
eye 9
favorite 0
comment 0
https://www.youtube.com/watch?v=oMOWTn87PkM Tutorial on Fabble! = http://fabble.cc/ntrobot2/pet-feeder NOTE: This pet feeder is still a prototype. Because I used a servo motor, the position of the cover can sometimes be a bit off. I plan to make another prototype with a stepper motor soon. If you own a cat, has he or she ever woke you up early in the morning to beg you for food? Or maybe you couldn't get home quite on time, so you had to make your pet wait till you get home to feed them? Well,...
Topics: cat, thingiverse, pet, Pets, iot, stl, smart_home
6
6.0
Jun 20, 2021
06/21
by
Myron Coleman (mcol82)
data
eye 6
favorite 0
comment 0
The inspiration for this mount came from the mount for my Google Home Mini. rekcahx made an amazing wall mount.
Topics: thingiverse, Bond_Home, stl, Electronics, smart_home, Bond
5
5.0
Mar 20, 2021
03/21
by
kasamatsu 91 (kasamatsu91)
data
eye 5
favorite 0
comment 0
This housing for a WIFI or Bluetooth controlled railaisboard fits inside a 60mm standard in-wall-socket. The Relaisboard is a DIY project available here: http://shop.in-circuit.de/product_info.php?cPath=22_48&products_id=167. With this controller board and WIFI module , I built up my own browser based blinds control. The WIFI module I used combines an Arduino Micro and a WIFI chip (also available at: http://shop.in-circuit.de/), so its programmable with the Arduino IDE. I set up a webserver...
Topics: arduino, stl, bluetooth, Electronics, thingiverse, smart_home, WIFI
2
2.0
Jan 18, 2022
01/22
by
(schranzistor)
data
eye 2
favorite 0
comment 0
Montageplatte für die Zigbee Airbox. Zum verdrehen. 2 Schraublöcher sowie 2 Magnete. Mounting plate for the Zigbee Airbox. To twist. 2 screw holes and 2 magnets. magnets: 10x2
Topics: thingiverse, smart_home, ZigBee, Hobby, Tuya, stl, airbox
9
9.0
Apr 17, 2021
04/21
by
Timo (Timothy3001)
data
eye 9
favorite 0
comment 0
What you can see here is a plain wall mount for an very old iPod Touch. The design itself is nothing special, contains some errors actually and was one of the first designs I created. Even though it's simple and not done that well, it became one of my most used 3d printed items. Why did I upload it? Well, even though it's not one of the best designs, it still looks quite smooth and definitely good enough for daily use. The actual reason why I uploaded this file is because of the idea behind it....
Topics: ipod, thingiverse, openhab, stl, smart_home, smarthome, Electronics
9
9.0
Jan 19, 2021
01/21
by
anne (sumpfing)
data
eye 9
favorite 0
comment 0
missing adapter for homematic thermostats
Topics: owotherm, Electronics, thingiverse, thermostat, smart home, homematic, stl
This paper proposes a prototype of an improved smart home controller that implements a neural network-based algorithm for enabling the controller to make decisions and act based on the current condition. Unlike previous approaches, this design also utilizes the use of IoT (internet of thing) technology and neural network based-algorithm for developing the controller. Since a smart home is equipped with various sensors, actuators, smart appliances, and mobile terminals, all of these devices need...
Topics: ADALINE, Home automation, IoT, Neural network, Smart home
4
4.0
Mar 18, 2021
03/21
by
Ronny Rigsby (LakeCruiser)
data
eye 4
favorite 0
comment 0
I wanted my Select Blinds (Vertical) to be smart blinds and tilt on demand. The goal was to do minimum modification of the existing blinds. The mod uses the 28BYJ-48 stepper Motor, ULN2003AN driver and the Wemos D1 Mini. I use Home Assistant as my server and ESPhome as the D1 Mini firmware. This mod cost me about $10.00 compared to $150 for "Smart Blinds"
Topics: Architecture, Decor, smart home, thingiverse, vertical_blinds, stl
4
4.0
Jun 21, 2021
06/21
by
(Ispep)
data
eye 4
favorite 0
comment 0
This temperature sensor is my favourite Zigbee sensor, lots of work has been done to make this mount design perfect. Transparent PLA makes the best result when the sensor is mounted on the wall. Want to know more about this temperature, humidity and pressure sensor? read about it on our blog: https://www.automatiserar.se/test-av-xiaomi-aqara-temperatursensor/ Want to by this sensor mount and support the smart home blog www.automatiserar.se? (Sweden only): https://www.automatiserar.se/butik/ If...
Topics: Xiaomi_Aqara, thingiverse, xiaomi_Smart_home, aqara, stl, temperature, Electronics, smart_home,...
11
11
Jan 9, 2021
01/21
by
Roel Snoek (snoekieboe)
data
eye 11
favorite 0
comment 0
Stand to hold my Amazon Echo Dot (2nd generation) * print with 25% infill * no support
Topics: thingiverse, stand, stl, openhab, Other, Echo, smart_home, AmazonEcho
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices
4
4.0
Jan 8, 2021
01/21
by
Georg Schneider (K3nk)
data
eye 4
favorite 0
comment 0
This are spacer for the Bosch Smart Home DoorWindow Contact from 1 to 12mm ***************************************************************************************************** Abstandshalter für die Tür/Fensterkontakte von Bosch Smart home von 1 bis 12mm
Topics: thingiverse, stl, Bosch, home_automation, smart_home, spacer, Organization
6
6.0
Jun 20, 2021
06/21
by
Thomas Bjørnson Larsen (Larsen1000)
data
eye 6
favorite 0
comment 0
This is a mount for the Elko blind switch which allows one to replace the ordinary switch with the Phillips Hue Dimmer. This will keep the power to the lamp on at all times, while the light can be dimmed and switched on and off. I made this because my wife would always use the ordinary switch instead off the Hue app or the smart switches. If the Hue lamps loose power, they are no longer available in the app. This allowed everyone in the house to be happy! My wife can turn the light on and of by...
Topics: Household, thingiverse, dimmer, stl, elko, Phillips_Hue, smart_home
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices
6
6.0
Mar 17, 2021
03/21
by
Borg Mueller (Borg_M)
data
eye 6
favorite 0
comment 0
Everybody using smart bulbs (like Philip's Hue) has probably experienced many times that the power supply to these bulbs was interrupted by the light switch. Their smartness is in this case immediately gone and they can be switched on again only manually. This small piece is inserted behind the rocker and prevents manual switching. It can be inserted and removed very easily and is of course not visible from the outside. The blocker is designed for Gira S55 single and double switches. Any...
Topics: S55, Household, switch, Hue, stl, thingiverse, Gira, smart_home
Life is getting to be plainly less demanding and less difficult with headway of Automation technology. In the present world manual framework are getting supplanted via Automatic frameworks. As innovations are getting propelled number of web clients are expanding and Internet turns into a piece of their day today life, and IoT is the most recent and updating web innovation. Web of things is a quickly developing system from ventures to purchasers that can share data and finish errands while you...
Topics: internet of things(IoT), Relays, Sensors, Technology, Smart Home
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices
Topics: manualzilla, manuals, Home, Home security & automation, Smart home devices
6
6.0
Mar 2, 2021
03/21
by
Thomas Bjørnson Larsen (Larsen1000)
data
eye 6
favorite 0
comment 0
This is a blind Switch which can be used if for Elko electrical switches.The cover goes stops people from turning on or off the switch. I use these for lamp switches where light is controlled automatically, f.ex. by a Philips Hue gateway. There is two version, one flat and one with mounting holes for Phillips and Ikea Smart house accessories. You can find the accessories among my other downloads. Makes sure to like and add the image of your build!
Topics: thingiverse, stl, traadfri, Household, elko, smart_home, Philips_Hue
2
2.0
Apr 19, 2022
04/22
by
Markus Bart (markusbart)
data
eye 2
favorite 0
comment 0
I needed a lamp that doesn't glare into my eyes or onto the projection screen, while still putting some light on the table for my snacks. Lamp is 15cm tall, using RGB+CCD LED Strip, connected to my smart home via Wifi/MQTT, powered with 4x 18650 Li-Ion battery. Change lamp color by publishing a message with content similar to "0,0,0,0,0". It's red, green, blue, warmwhite, coldwhite. Values are 0..255. If any of the R,G,B values are >0, WW and CW are reset to 0 to avoid overcurrent...
Topics: Household, thingiverse, lamp, LED_lamp, smart_home, ESP8266, stl
5
5.0
Jun 21, 2021
06/21
by
Dominik S (MroznyHipis)
data
eye 5
favorite 0
comment 0
This project will allow you to convert your - Mi smart plug WIFI or ZigBee China to any type of world wall socket. ___________ BEFORE YOU PRINT !!! You need to: - know how to use soldering Iron - 4 small screws (I used 2x8 wood type) So, You are ready? 0. Make sure what version you have - WI-FI or Zigbee 1. Follow Post-Print Instruction. 2. Solder short cables to (2 cables to negative, 1 cable to Line In, 1 cable to Line Out) 3. Put a screw type connector for your cables 4. Print ! 5. Put...
Topics: wall_sockets, Smart_Plug, Xiaomi_mijia, thingiverse, xiaomi_Smart_home, smart, DIY, Mijia, stl,...
Nowadays, many researches have been conducted on smart home. Smart home control system (SHCS) can be integrated into an existing home appliances to reduce the need for human intervention, increase security and energy efficiency. We have proposed a smart home system using internet of things and four types of sensors, including PIR, temperature, ultrasonic, and smoke gas sensor for automatic environmental control and intrustion detection. In this paper, the performance of the previously developed...
Topics: Arduino, Internet of things, Sensors, Smart home, Solar charger
8
8.0
Jun 11, 2021
06/21
by
(oxalys)
data
eye 8
favorite 0
comment 0
Summary If you want to replace your standard wall switchs with xiaomi switch. Need supports to print correctly. Print Settings Printer: Dagoma Discovery 200 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 17%
Topics: Wireless, holder, smart_home, switch, thingiverse, xiaomi, domotic, stl
