248
248
Jun 1, 2011
06/11
by
Dorais, Gregory A.; Desiano, Salvatore D.; Gawdiak, Yuri; Nicewarner, Keit
texts
eye 248
favorite 0
comment 0
This paper presents an overview of an ongoing research and development effort at the NASA Ames Research Center to create an autonomous control system for an internal spacecraft autonomous mobile monitor. It primary functions are to provide crew support and perform intra- vehicular sensing activities by autonomously navigating onboard the International Space Station. We describe the mission roles and high-level functional requirements for an autonomous mobile monitor. The mobile monitor...
Topics: PULSE DETONATION ENGINES, EJECTORS, THRUST AUGMENTATION, THRUST MEASUREMENT, TEST STANDS,...
An experimental program was performed in which the individual performance of multiple VTOL model lift fans was measured. The model tested consisted of three 5.5 in. diameter tip-turbine driven model VTOL lift fans mounted chordwise in a two-dimensional wing to simulate a pod-type array. The performance data provided significant insight into possible thrust variations and losses caused by the presence of cover doors, adjacent fuselage panels, and adjacent fans. The effect of a partial loss of...
Topics: NASA Technical Reports Server (NTRS), LIFT FANS, PROPULSION SYSTEM PERFORMANCE, THRUST MEASUREMENT,...
248
248
Jul 5, 2010
07/10
by
Dawson, J. R
texts
eye 248
favorite 0
comment 0
No Abstract Available
Topics: DUCTED ROCKET ENGINES, PROPULSION SYSTEM PERFORMANCE, SOLID PROPELLANT ROCKET ENGINES, AERODYNAMIC...
Electronegative ion thrusters are a variation of tradition gridded ion thruster technology differentiated by the production and acceleration of both positive and negative ions. Benefits of electronegative ion thrusters include the elimination of lifetime-limiting cathodes from the thruster architecture and the ability to generate appreciable thrust from both charge species. Following the continued development of electronegative ion thruster technology as exhibited by the PEGASES (Plasma...
Topics: NASA Technical Reports Server (NTRS), THRUST MEASUREMENT, ION ENGINES, ROCKET ENGINE DESIGN,...
Indirect force measurement technique estimates unsteady forces acting on elastic model during wind tunnel tests. Measurement of forces is practically insensitive to errors in aeroelastic scaling between model and full-scale structure, simplifying design, fabrication and dynamic calibration.
Topics: NASA Technical Reports Server (NTRS), AERODYNAMIC FORCES, BUFFETING, FEEDBACK CIRCUITS, SCALING,...
Innovative Information Systems (IIS), Inc. is in the process of designing and fabricating a high bandwidth force and moment measuring device (i.e. the Magnetic Thruster Test Stand). This device will use active magnetic suspension to allow direct measurements of the forces and torques generated by the rocket engines of the missile under test. The principle of operation of the Magnetic Thruster Test Stand (MTTS) is based on the ability to perform very precise, high bandwidth force and position...
Topics: NASA Technical Reports Server (NTRS), MAGNETIC SUSPENSION, MEASURING INSTRUMENTS, ROCKET ENGINES,...
The Advanced Composition Explorer (ACE) spacecraft will require frequent attitude reorientations in order to maintain the spacecraft high gain antenna (HGA) within 3 deg of earth-pointing. These attitude maneuvers will be accomplished by employing a series of ground-commanded thruster pulses, computed by ground operations personnel, to achieve the desired change in the spacecraft angular momentum vector. With each maneuver, attitude nutation will be excited. Large nutation angles are...
Topics: NASA Technical Reports Server (NTRS), APPROXIMATION, ATTITUDE (INCLINATION), ATTITUDE CONTROL,...
A real time computer program was implemented on a F-15 jet fighter to monitor in-flight engine performance of a Digital Electronic Engine Controlled (DEES) F-100 engine. The application of two gas generator methods to calculate in-flight thrust real time is described. A comparison was made between the actual results and those predicted by an engine model simulation. The percent difference between the two methods was compared to the predicted uncertainty based on instrumentation and model...
Topics: NASA Technical Reports Server (NTRS), COMPUTER PROGRAMS, ENGINE TESTS, FLIGHT TESTS, REAL TIME...
A high pressure thruster effort was conducted with the major objective of demonstrating a duct cooling concept with gaseous propellant in a thruster operating at nominally 300 psia and 1500 lbf. The analytical design methods for the duct cooling were proven in a series of tests with both ambient and reduced temperature propellants. Long duration tests as well as pulse mode tests demonstrated the feasibility of the concept. All tests were conducted with a scaling of the raised post triplet...
Topics: NASA Technical Reports Server (NTRS), COOLING SYSTEMS, GASEOUS ROCKET PROPELLANTS, IGNITION LIMITS,...
Combined-cycle propulsion technology is a strong candidate for meeting NASA space transportation goals. Extensive ground testing of integrated air-breathing/rocket system (e.g., components, subsystems and engine systems) across all propulsion operational modes (e.g., ramjet, scramjet) will be needed to demonstrate this propulsion technology. Ground testing will occur at various test centers based on each center's expertise. Testing at the NASA John C. Stennis Space Center will be primarily...
Topics: NASA Technical Reports Server (NTRS), NASA PROGRAMS, SPACE TRANSPORTATION, TEST FACILITIES, GROUND...
An airflow and thrust calibration of an F100 engine was conducted in coordination with a flight test program to study airframe-propulsion system integration characteristics of turbofan-powered high-performance aircraft. The tests were conducted with and without augmentation for a variety of simulated flight conditions with emphasis on the transonic regime. Test results for all conditions are presented in terms of corrected airflow and corrected gross thrust as functions of corrected fan speed...
Topics: NASA Technical Reports Server (NTRS), ALTITUDE TESTS, ENGINE TESTS, F-100 AIRCRAFT, THRUST...
The effects of the reaction control system (RCS) jet-flow field interactions on the space shuttle orbiter system during entry are discussed. The primary objective of the test program was to obtain data for the shuttle orbiter configuration to determine control amplification factors resulting from jet interaction between the RCS plumes and the external flow over the vehicle. A secondary objective was to provide data for comparison and improvement of analytic jet interaction prediction...
Topics: NASA Technical Reports Server (NTRS), AERODYNAMIC CHARACTERISTICS, ATTITUDE CONTROL, FLOW...
There has been significant work recently in the development of iodine-fed Hall thrusters for in-space propulsion applications.1 The use of iodine as a propellant provides many advantages over present xenon-gas-fed Hall thruster systems. Iodine is a solid at ambient temperature (no pressurization required) and has no special handling requirements, making it safe for secondary flight opportunities. It has exceptionally high ?I sp (density times specific impulse), making it an enabling technology...
Topics: NASA Technical Reports Server (NTRS), FEED SYSTEMS, HALL THRUSTERS, IODINE, MASS FLOW RATE, THRUST...
194
194
Jul 12, 2010
07/10
by
Cooper, L. P
texts
eye 194
favorite 0
comment 0
An advanced orbit transfer vehicles (OTV) which will be an integral part of the national space transportation system to carry men and cargo between low Earth orbit and geosynchronous orbit will perform planetary transfers and deliver large acceleration limited space structures to high Earth orbits is reviewed. The establishment of an advanced propulsion technology base for an OTV for the mid 1990's is outlined. The program supports technology for three unique engine concepts. Work is conducted...
Topics: LATERAL OSCILLATION, ECCENTRICITY, FRICTION FACTOR, GRAPHS (CHARTS), PRESSURE DISTRIBUTION, THRUST...
The space station uses small rocket motors, called thrusters, for orientation control. Because of the lack of viable design tools for small rockets, the initial thruster design was basically a very small version of a large rocket motor. Thrust measurements of the initial design were lower than predicted. To improve predictions it was decided to develop a verison of the RPLUS2D reacting flow code for thruster calculations. RPLUS2D employs an implicit finite volume, lower-upper symmetric...
Topics: NASA Technical Reports Server (NTRS), COMPUTER PROGRAMS, CONVERGENT-DIVERGENT NOZZLES, FLOW...
The first results of a program to expand the operational envelope of low-power arcjets to higher specific impulse and power levels are presented. The performance of a kW-class laboratory model arcjet thruster was characterized at three mass flow rates of a 2:1 mixture of hydrogen and nitrogen at power levels ranging from 1.0 to 2.0 kW. This same thruster was then operated for a total of 300 h at a specific impulse and power level of 550 s and 2.0 kW, respectively, in three continuous 100-h...
Topics: NASA Technical Reports Server (NTRS), ARC JET ENGINES, AUXILIARY PROPULSION, ELECTRIC ROCKET...
A torsional-type thrust stand has been designed and built to test Pulsed Plasma Thrusters (PPT's) in both single shot and repetitive operating modes. Using this stand, momentum per pulse was determined strictly as a function of thrust stand deflection, spring constant, and natural frequency. No empirical corrections were required. The accuracy of the method was verified using a swinging impact pendulum. Momentum transfer data between the thrust stand and the pendulum were consistent to within...
Topics: NASA Technical Reports Server (NTRS), ELECTROMAGNETIC PROPULSION, ELECTROMAGNETIC PULSES, ENGINE...
A review is presented of recent experimental results, analytical procedures and test techniques employed to evaluate the effects of inlet flow distortion on the stability characteristics of representative afterburning turbofan and turbojet compression systems. Circumferential distortions of pressure and temperature, separately and in combination are considered. Resulting engine sensitivity measurements are compared with predictions based on simplified parallel compressor models and with several...
Topics: NASA Technical Reports Server (NTRS), ENGINE INLETS, FLOW DISTORTION, INLET FLOW, TURBOFAN ENGINES,...
The evaluation of the performance of any propulsion device requires the accurate measurement of thrust. While chemical rocket thrust is typically measured using a load cell, the low thrust levels associated with electric propulsion (EP) systems necessitate the use of much more sensitive measurement techniques. The design and development of electric propulsion thrust stands that employ a conventional hanging pendulum arm connected to a balance mechanism consisting of a secondary arm and variable...
Topics: NASA Technical Reports Server (NTRS), CALIBRATING, ELECTRIC PROPULSION, ROCKET THRUST, THRUST...
As part of an on-going cooperative program with industry, an engineering model SPT-140 Hall thruster, which may be suitable for orbit insertion and station-keeping of geosynchronous communication satellites, was evaluated with respect to thrust and radiated electromagnetic interference at the NASA Lewis Research Center. Performance measurements were made using a laboratory model propellant feed system and commercial power supplies. The engine was operated in a space simulation chamber capable...
Topics: NASA Technical Reports Server (NTRS), ELECTRIC PROPULSION, SPACECRAFT PROPULSION, HALL EFFECT,...
An experimental investigation of the near-field megawatt, single-shot exhaust is presented for the self-field and auxiliary field cases (0-2 T). Plasma impact pressure and number density are correlated to provide velocity profiles (30,000 to 70,000 m/sec), thrust (10 to 120 N), impulse (3 to 16 N-sec) and mass accounting. The data agree with Hugel's self-field theory for the case where thrust is produced entirely by electromagnetic force. The data show that the thrust monotonically increases...
Topics: NASA Technical Reports Server (NTRS), ARC JET ENGINES, EXHAUST GASES, MAGNETOHYDRODYNAMIC...
The J-4 Rocket Test Cell and its Thrust Measuring System (TMS) at Arnold Engineering Development Center were modified to provide multicomponent force measurement of large solid rocket motors having nozzle gimbaling capability. To verify the structural integrity of a combined TMS and motor system, a large finite element model of the TMS and motor was developed using the NASTRAN computer program. Due to the importance of obtaining accurate estimates for the dynamic force levels, it was necessary...
Topics: NASA Technical Reports Server (NTRS), FINITE ELEMENT METHOD, NASTRAN, ROCKET THRUST, SOLID...
Tests were conducted to investigate the effect of vacuum facility pressure on the performance of small thruster nozzles. Thrust measurements of two converging-diverging nozzles with an area ratio of 140 and an orifice plate flowing unheated nitrogen and hydrogen were taken over a wide range of vacuum facility pressures and nozzle throat Reynolds numbers. In the Reynolds number range of 2200 to 12 000 there was no discernable viscous effect on thrust below an ambient to total pressure ratio of...
Topics: NASA Technical Reports Server (NTRS), CONVERGENT-DIVERGENT NOZZLES, HIGH VACUUM, SEPARATED FLOW,...
The effect of nozzle configuration on the operating characteristics of a low power dc arcjet thruster was determined. A conical nozzle with a 30 deg converging angle, a 20 deg diverging angle, and an area ratio of 225 served as the baseline case. Variations on the geometry included bell-shaped contours both up and downstream, and a downstream trumpet-shaped contour. The nozzles were operated over a range of specific power near that anticipated for on-orbit operation. Mass flow rate, thrust,...
Topics: NASA Technical Reports Server (NTRS), ARC JET ENGINES, CONICAL NOZZLES, ELECTRIC ROCKET ENGINES,...
Reports by the research staff and graduate students of the Mechanical Engineering Department at the University of Queensland are collected and presented. These reports cover various studies related to the advancement of scramjet technology and the operation of advanced hypervelocity shock-expansion tubes. The report topics include the experimental studies of mixing and combustion in a scramjet flow path, the measurement of integrated thrust and skin friction, and the development of a...
Topics: NASA Technical Reports Server (NTRS), SUPERSONIC COMBUSTION RAMJET ENGINES, COMBUSTIBLE FLOW,...
263
263
Jul 6, 2010
07/10
by
Skuridin, G. A
texts
eye 263
favorite 1
comment 0
The scientific problems involved in designing equipment for space missions to investigate solar system planets are discussed. Achievements in the investigation of the planets by spacecraft are reported. Results of the investigations of the atmospheres and ionospheres of Venus and Mars and physical and mechanical data derived from lunar missions are analyzed. Prospects for the study of the planets of the solar system are predicted.
Topics: COMPRESSIBLE FLOW, PROPULSIVE EFFICIENCY, THERMODYNAMICS, TURBOJET ENGINES, BYPASSES, COMBUSTION...
A nozzle installation of general interest is a podded engine mounted near the aft lower surface of the wing. The effect of this installation on the performance of an auxiliary-inlet ejector nozzle with a clamshell flow diverter was investigated over a Mach number range of 0.6 to 1.3 by using a modified F-106B aircraft. The clamshell flow diverter was tested in a 17 deg position with double-hinged synchronized floating doors. The ejector nozzle trailing-edge flaps were simulated in the closed...
Topics: NASA Technical Reports Server (NTRS), FLIGHT TESTS, INLET NOZZLES, NACELLES, PODS (EXTERNAL...
Pulsed plasma thrusters are low thrust propulsive devices which have a high specific impulse at low power. A pulsed plasma thruster is currently scheduled to fly as an experiment on NASA's Earth Observing-1 satellite mission. The pulsed plasma thruster will be used to replace one of the reaction wheels. As part of the qualification testing of the thruster it is necessary to determine the nominal thrust as a function of charge energy. These data will be used to determine control algorithms....
Topics: NASA Technical Reports Server (NTRS), LOW THRUST, ROCKET THRUST, LOW THRUST PROPULSION, PROPULSION...
The development of a model which predicts doubly charged ion density is discussed. The accuracy of the model is shown to be good for two different thruster sizes and a total of 11 different cases. The model indicates that in most cases more than 80% of the doubly charged ions are produced from singly charged ions. This result can be used to develop a much simpler model which, along with correlations of the average plasma properties, can be used to determine the doubly charged ion density in ion...
Topics: NASA Technical Reports Server (NTRS), ION CHARGE, ION ENGINES, ION PROPULSION, MERCURY (METAL),...
A small scale rectangular throat ejector with plane slot nozzles and a fixed throat area was tested to determine the effects of diffuser sidewall length, diffuser area ratio, and sidewall nozzle position on thrust and mass augmentation. The thrust augmentation ratio varied from approximately 0.9 to 1.1. Although the ejector did not have good thrust augmentation performance, the effects of the parameters studied are believed to indicate probable trends in thrust augmenting ejectors.
Topics: NASA Technical Reports Server (NTRS), EJECTORS, THRUST AUGMENTATION, V/STOL AIRCRAFT, MASS FLOW...
An experimental program to measure the aerodynamic characteristics of the NACA 64-621 airfoil when equipped with plain ailerons of 0.38 chord and 0.30 chord and with 0.38 chord balanced aileron has been conducted in the pressurized O.S.U. 6 x 12 ft High Reynolds Number Wind Tunnel. Surface pressures were measured and integrated to yield lift and pressure drag coefficients for angles of attack from -3 to +42 deg and for selected aileron deflections from 0 to -90 deg at nominal Mach and Reynolds...
Topics: NASA Technical Reports Server (NTRS), AERODYNAMIC CHARACTERISTICS, AERODYNAMIC DRAG, AILERONS,...
The design and testing of a small inductive pulsed plasma thruster (IPPT) is described. The device was built as a test-bed for the pulsed gas-valves and solid-state switches required for a thruster of this kind, and was designed to be modular to facilitate modification. The thruster in its present configuration consists of a multi-turn, spiral-wound acceleration coil (270 millimeters outer diameter, 100 millimeters inner diameter) driven by a 10 microfarad capacitor and switched with a...
Topics: NASA Technical Reports Server (NTRS), ROCKET ENGINE DESIGN, MAGNETIC INDUCTION, PULSED PLASMA...
Two long-duration tests were conducted with a surplus Mariner Mars 1969 monopropellant hydrazine reactor in an attempt to induce the washout phenomenon. The Mariner Mars 1969 reactor was chosen because it has a long development history and thus is well characterized. No washout occurred during either of the two 1000-s tests, although slow transients were observed in the reactor operation during what were nominally steady-state conditions. The 2000-s of operating time represents nearly an order...
Topics: NASA Technical Reports Server (NTRS), CATALYTIC ACTIVITY, HYDRAZINES, LONG TERM EFFECTS, MARINER...
The objectives of this program are to provide a demonstration of hydrogen/oxygen propulsion technology readiness for the initial operational capability (IOC) space station application, specifically gaseous hydrogen/oxygen and warm hydrogen thruster concepts, and to establish a means for evolving from the IOC space station propulsion system (SSPS) to that required to support and interface with advanced station functions. These objectives were met by analytical studies and by furnishing a...
Topics: NASA Technical Reports Server (NTRS), CONTROLLERS, ENGINE TESTS, HYDROGEN OXYGEN ENGINES, ROCKET...
A study was performed that investigates parameter measurement effects on calculated in-flight thrust for the General Electric F404-GE-400 afterburning turbofan engine which powered the X-29A forward-swept wing research aircraft. Net-thrust uncertainty and influence coefficients were calculated and are presented. Six flight conditions were analyzed at five engine power settings each. Results were obtained using the mass flow-temperature and area-pressure thrust calculation methods, both based on...
Topics: NASA Technical Reports Server (NTRS), AFTERBURNING, IN-FLIGHT MONITORING, THRUST MEASUREMENT,...
We discuss thrust measurements of Dielectric Barrier Discharge (DBD) plasma actuators devices used for aerodynamic active flow control. After a review of our experience with conventional thrust measurement and significant non-repeatability of the results, we devised a suspended actuator test setup, and now present a methodology of thrust measurements with decreased uncertainty. The methodology consists of frequency scans at constant voltages. The procedure consists of increasing the frequency...
Topics: NASA Technical Reports Server (NTRS), ACTUATORS, DIELECTRICS, THRUST MEASUREMENT, ELECTRIC...
The components required for an in-space iodine vapor-fed Hall effect thruster propellant management system are described. A laboratory apparatus was assembled and used to produce iodine vapor and control the flow through the application of heating to the propellant reservoir and through the adjustment of the opening in a proportional flow control valve. Changing of the reservoir temperature altered the flowrate on the timescale of minutes while adjustment of the proportional flow control valve...
Topics: NASA Technical Reports Server (NTRS), FEED SYSTEMS, HALL THRUSTERS, IODINE, MASS FLOW RATE, THRUST...
Performance testing of a second generation, 50 kW-class Hall thruster labeled NASA-457M v2 was conducted at the NASA Glenn Research Center. This NASA-designed thruster is an excellent candidate for a solar electric propulsion system that supports human exploration missions. Thruster discharge power was varied from 5 to 50 kW over discharge voltage and current ranges of 200 to 500 V and 15 to 100 A, respectively. Anode efficiencies varied from 0.56 to 0.71. The peak efficiency was similar to...
Topics: NASA Technical Reports Server (NTRS), HALL THRUSTERS, TEST FACILITIES, VACUUM TESTS, THRUST...
We discuss thrust measurements of Dielectric Barrier Discharge (DBD) plasma actuators devices used for aerodynamic active flow control. After a review of our experience with conventional thrust measurement and significant non-repeatability of the results, we devised a suspended actuator test setup, and now present a methodology of thrust measurements with decreased uncertainty. The methodology consists of frequency scans at constant voltages. The procedure consists of increasing the frequency...
Topics: NASA Technical Reports Server (NTRS), THRUST MEASUREMENT, DIELECTRICS, ACTUATORS, BOUNDARY LAYER...
Operational characteristics of two separate inductive thrusters with conical theta pinch coils of different cone angles are explored through thrust stand measurements and time- integrated, unfiltered photography. Trends in impulse bit measurements indicate that, in the present experimental configuration, the thruster with the inductive coil possessing a smaller cone angle produced larger values of thrust, in apparent contradiction to results of a previous thruster acceleration model. Areas of...
Topics: NASA Technical Reports Server (NTRS), PULSED PLASMA THRUSTERS, THETA PINCH, INTAKE SYSTEMS, THRUST...
This effort is an international collaboration and academic partnership to mature an innovative electric propulsion (EP) thruster concept to TRL 3 through direct thrust measurement. The initial target application is for Small Satellites, but can be extended to higher power. The Plasma propulsion with Electronegative GASES (PEGASES) concept simplifies ion thruster operation, eliminates a neutralizer requirement and should yield longer life capabilities and lower cost implementation over...
Topics: NASA Technical Reports Server (NTRS), ELECTRIC PROPULSION, GAS IONIZATION, THRUST MEASUREMENT, COST...
A variation of a hanging pendulum thrust stand capable of measuring the performance of an electric thruster operating in the vertical orientation is presented. The vertical orientation of the thruster dictates that the thruster must be horizontally offset from the pendulum pivot arm, necessitating the use of a counterweight system to provide a neutrally-stable system. Motion of the pendulum arm is transferred through a balance mechanism to a secondary arm on which deflection is measured. A...
Topics: NASA Technical Reports Server (NTRS), THRUST MEASUREMENT, ELECTRIC PROPULSION, VERTICAL...
Inductive Pulsed Plasma Thrusters (iPPT) spacecraft propulsion devices in which electrical energy is capacitively stored and then discharged through an inductive coil. The thruster is electrodeless, with a time-varying current in the coil interacting with a plasma covering the face of the coil to induce a plasma current Propellant is accelerated and expelled at a high exhaust velocity (O(10 -- 100 km/s)) by the Lorentz body force arising from the interaction of the magnetic field and the...
Topics: NASA Technical Reports Server (NTRS), THRUST MEASUREMENT, PULSED PLASMA THRUSTERS, ELECTRIC...
Plug nozzles with two types of 40-spoke noise suppressor were tested at free-stream Mach numbers from 0 to 0.45 and over a range of nozzle pressure ratios from 1.5 to 4.0. In additon, an unsuppressed plug nozzle and a Supersonic Tunnel Association nozzle were also tested to provide baseline levels of thrust performance. The unsuppressed plug nozzle had an efficiency of 98 percent at an assumed takeoff pressure ratio of 3.0 and at Mach 0.36. At the same condition the suppressor nozzles had...
Topics: NASA Technical Reports Server (NTRS), NOISE REDUCTION, PLUG NOZZLES, SUPERSONIC WIND TUNNELS,...
Thrust measurements of a hollow cathode mercury discharge were made with a synthetic mica target on a torsion pendulum. Thrust measurements were made for various target angles, tip temperatures, flow rates, keeper discharge powers, and accelerator electrode voltages. The experimental thrust data are compared with theoretical values for the case where no discharge power was employed.
Topics: NASA Technical Reports Server (NTRS), HOLLOW CATHODES, MERCURY (METAL), THRUST MEASUREMENT,...
Theoretical investigations are made on the performance of microjets. A description is given of experiments with micropropulsion units to correlate the results obtained in the first part of the report. Execution of performance measurements is discussed, and error calculations are presented.
Topics: NASA Technical Reports Server (NTRS), DATA CORRELATION, ERROR ANALYSIS, MICROROCKET ENGINES,...
This study comprised direct thrust measurements, flow visualization by use of a spark shadowgraph technique, and mean and fluctuating velocity measurements with a pitot tube and linearized constant temperature hot-wire anemometry respectively. A gain in thrust of as much as 10 to 15% was observed for the pulsatile ejector flow as compared to the steady flow configuration. From the velocity profile measurements, it is concluded that this enhanced augmentation for pulsatile flow as compared to a...
Topics: NASA Technical Reports Server (NTRS), EJECTORS, ENTRAINMENT, FLOW VISUALIZATION, JET FLOW, MASS...
A simplified gross thrust computing technique for the HiMAT J85-GE-21 engine using altitude facility data was evaluated. The results over the full engine envelope for both the standard engine mode and the open nozzle engine mode are presented. Results using afterburner casing static pressure taps are compared to those using liner static pressure taps. It is found that the technique is very accurate for both the standard and open nozzle engine modes. The difference in the algorithm accuracy for...
Topics: NASA Technical Reports Server (NTRS), AIRCRAFT CONTROL, ALGORITHMS, FLIGHT ALTITUDE,...
355
355
May 23, 2011
05/11
by
Ferraro, Ellen J
texts
eye 355
favorite 0
comment 0
This dissertation presents an analysis of airborne altimetry measurements taken over the Greenland ice sheet with the 13.9 GHz Advanced Application Flight Experiment (AAFE) pulse compression radar altimeter. This Ku-band instrument was refurbished in 1990 by the Microwave Remote Sensing Laboratory at the University of Massachusetts to obtain high-resolution altitude measurements and to improve the tracking, speed, storage and display capabilities of the radar. In 1991 and 1993, the AAFE...
Topics: COMMUNICATION SATELLITES, PROPELLANTS, FUEL INJECTION, TEMPERATURE CONTROL, REYNOLDS NUMBER,...
Electronegative ion thrusters are a variation of traditional gridded ion thruster technology differentiated by the production and acceleration of both positive and negative ions. Benefits of electronegative ion thrusters include the elimination of lifetime-limiting cathodes from the thruster architecture and the ability to generate appreciable thrust from both charge species. While much progress has been made in the development of electronegative ion thruster technology, direct thrust...
Topics: NASA Technical Reports Server (NTRS), THRUST MEASUREMENT, ION ENGINES, ROCKET ENGINE DESIGN,...
