0
0.0
Jan 18, 2021
01/21
by
Patrick Benfield (mx_rider_250)
data
eye 0
favorite 0
comment 0
Axial racing logo, enjoy!
Topics: Axial_Wraith, Axial_Scx10, thingiverse, Signs & Logos, stl, Axial
0
0.0
Jan 19, 2021
01/21
by
dominic michel (domi1974)
data
eye 0
favorite 0
comment 0
A friend drove my Defender in the Woods and gave him some really nice scratches and broke one of the window glases. Next time he drives the car almost all windows are protected by Grilles. So he can go even more offroad. The Tree bar / Tree Slider can be found here: https://www.thingiverse.com/thing:2885954 If you need some Rock Slider you can find them here: https://www.thingiverse.com/thing:2889411 Easy to Print. Only glue it above the Windows. Left some space for the door hinges of the...
Topics: Defender D90, RC4WD, R/C Vehicles, open RC, Defender, SCX10, stl, Axial, TRX, MST, trx-4,...
0
0.0
Jan 19, 2021
01/21
by
Semanyd (Semanyd3DP)
data
eye 0
favorite 0
comment 0
Modèle basé sur la référence AXIAL AX31309 sans les prolongateurs AX31266 court ou même long. Jantes idéal pour le YETI SCORE et YETI. Model based on the AXIAL reference AX31309 without the short or even long AX31266 extensions. Ideal rims for the Yeti SCORE and Yeti. Like la page Facebook - https://www.facebook.com/3DPAdmin
Topics: RC 1/10, Axial_Trophy_Truck, Trophy truck, AXIAL YETI SCORE, stl, thingiverse, yeti, SCORE, 3D...
1
1.0
Jan 9, 2021
01/21
by
w. de Boer (wouterb)
data
eye 1
favorite 0
comment 0
Thing to lead a winch line through the bumper of an RC crawler. nice scale detail
Topics: R/C Vehicles, thingiverse, Axial_Scx10, stl
The aerodynamic performance of the inlet manifold and stator assembly of the compressor drive turbine was experimentally determined with cold air as the working fluid. The investigation included measurements of mass flow and stator-exit fluid torque as well as radial surveys of total pressure and flow angle at the stator inlet and annulus surveys of total pressure and flow angle at the stator exit. The stator-exit aftermixed flow conditions and overall stator efficiency were obtained and...
Topics: NASA Technical Reports Server (NTRS), AERODYNAMICS, AXIAL FLOW TURBINES, GAS TURBINE ENGINES,...
The methodology used by the General Rotorcraft Aeromechanical Stability Program (GRASP) to model the characteristics of the flow through a helicopter rotor in hovering or axial flight is described. Since the induced flow plays a significant role in determining the aeroelastic properties of rotorcraft, the computation of the induced flow is an important aspect of the program. Because of the combined finite-element/multibody methodology used as the basis for GRASP, the implementation of induced...
Topics: NASA Technical Reports Server (NTRS), AEROELASTICITY, FLUID FLOW, HELICOPTERS, ROTARY WINGS,...
Film-cooling experiments were conducted at four levels of free-stream turbulence to test the hypothesis that the film-cooling effectiveness is inversely related to the free-stream turbulence level. The hot-gas operating conditions were held constant at a temperature of 590 K, a pressure of 1 atmosphere, and a velocity of 62 m/sec. The film-cooling air was at ambient inlet temperature, and the film-cooling flow rates were 2.5, 5.0, 7.5, and 10.0 percent of the total airflow. Blockage plates with...
Topics: NASA Technical Reports Server (NTRS), FILM COOLING, FREE FLOW, TURBULENT MIXING, AXIAL FLOW,...
1
1.0
Jan 11, 2021
01/21
by
Mark Norton (UKCD)
data
eye 1
favorite 0
comment 0
Picture one on the truck Picture two using the existing mounting holes Picture three from the rear Picture four bed mounting Wanted a wheel carrier with a set position so I came up with this, Its tough as well, I had a heavy rear fall & no damage done what so ever.
Topics: scx10_ii_Honcho, scx10ii, thingiverse, Axial_Scx10, 3D Printing, stl, Trail_honcho
R&D Report 1954-41 : The AKG electrostatic microphone Type C12. H.D. Harwood, R.J Packer A new electrostatic microphone, type C 12, has been produced by the firm of Akustische und Kino-Gerate Gesellschaft in Vienna. The nominal polar characteristic of the microphone can be varied from omnidirectional through cardioid to a figure-of-eight by a multi-position remote control switch. Frequency response, sensitivity and noise have been measured on a single specimen for these three conditions....
Topics: frequency, microphone, condition, characteristics, type, axial, cardioid, omnidirectional,...
91
91
texts
eye 91
favorite 0
comment 0
PlayChoice Operation Manual
Topics: ohm, resistor, electrolytic, quad, fcc, capacitor, monitor, coin, octal, assy, control panel,...
0
0.0
Jan 18, 2021
01/21
by
Bert Nijkamp (BertNijkamp)
data
eye 0
favorite 0
comment 0
This is an axial fan with a diameter of 200 mm, which designed to produce a high airflow using an efficient airfoil and winglets. This fan can be used on any DC motor with a 4mm axle. The fan can be fixed using an M4 (headless) screw.
Topics: Fan_blades, Axial_fan, thingiverse, Engineering, Efficient_fan, stl
0
0.0
Jan 20, 2021
01/21
by
Robert Posey (Voodoobrew)
data
eye 0
favorite 0
comment 0
This is a blank door, if you like plain, or bling it out yourself. Your 3d printing software should be able to mirror this thingy.
Topics: R/C Vehicles, stl, Axial, thingiverse
78
78
Jan 12, 2011
01/11
by
Bladewake Totality Base of Literature
movies
eye 78
favorite 1
comment 0
*Unequal exchange is an important concept in World Systems Approach *Peripheral products", which have low labour costs, are exchanged with "core-like products", which have high labour costs, and the result is an unequal exchange that sends disproportionate "surplus value" to the Core *As a result of wage differences between the core and peripheral workers, some measure of the surplus value extracted from workers in the periphery is transferred, under the guise of...
Topics: inequality, World-Systems Theory, Wallerstein, Third World, racism, axial division of labour,...
The trend in military aircraft is toward increasing thrust loading for improved maneuverability coupled with a requirement for extended subsonic cruise range at low power settings. Conventional turbine engines designed to meet these requirements must operate over large ranges of airflow between maximum power and cruise. As a result, the inlets and nozzles designed for these engines cannot perform efficiently with the low airflow rates typical of subsonic cruise operation. Variable turbine...
Topics: DTIC Archive, May, Jr , Robert J, PRATT AND WHITNEY AIRCRAFT GROUP EAST HARTFORD CT, *TURBOFAN...
The method of integral relations has been used to compute the inviscid flow over a blunt body immersed in a nonuniform, expanding flow field. Emphasis has been placed on defining the flow environment experienced by a nose tip model in the exhaust plume of an underexpanded arc jet or rocket engine. Accordingly, the integral method has been formulated for an arbitrary description of a free stream which possesses both axial and radial gradients in Mach No., flow angle, total pressure, and total...
Topics: DTIC Archive, Crowell,P G, AEROSPACE CORP SAN BERNARDINO CA TECHNOLOGY DIV, *INVISCID FLOW,...
A modal flutter analysis for biaxially loaded, orthotropic panels, using linear piston-theory aerodynamics, was extended in order to include the effects of inplane shear loading. Flutter boundaries for shear loads up to buckling are calculated for simply supported, isotropic panels of various length-width ratios and for a square, isotropic panel with elastic boundary conditions along the leading and trailing edges. These flutter boundaries are used to define conservative design curves. Sample...
Topics: NASA Technical Reports Server (NTRS), SHEAR STRAIN, SUPERSONIC FLUTTER, AXIAL LOADS, BUCKLING,...
0
0.0
Jan 3, 2021
01/21
by
Dylan Sheld (Dsheld720)
data
eye 0
favorite 0
comment 0
SCX10 radio box frame crossmember clearenced for oversized axel mounted servos.
Topics: scx10, R/C Vehicles, scale_rc, stl, Axialracing, thingiverse, Axial, Axial_Scx10
0
0.0
Jan 4, 2021
01/21
by
Timothy Woodhouse (DarkangelV24)
data
eye 0
favorite 0
comment 0
Rear link riser for the Axial Capra
Topics: R/C Vehicles, stl, Capra, rc_crawler, Axial_Capra, RC_Car, thingiverse, axial_cover, Axial
0
0.0
Jan 6, 2021
01/21
by
CW (Thurman_Merman)
data
eye 0
favorite 0
comment 0
To re-locate the bumper LED's, mount to existing frame bolts nothing extra required.
Topics: jeep, SCX24, Axial_SCX24, stl, Vehicles, led_mount, thingiverse, RC_Car
The objective of this three-year project was to develop and deliver to NASA Lewis one-dimensional and two-dimensional higher-order theories, and related computer codes, for the analysis, optimization and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, blisk blades). To satisfy this objective, a quasi one-dimensional version of the higher-order theory, HOTCFGM-1D, and four computer...
Topics: NASA Technical Reports Server (NTRS), COMPOSITE STRUCTURES, CYLINDRICAL BODIES, COMPUTER PROGRAMS,...
This thesis determines the magnitude of heat transfer in the high-pressure compressor of a turbofan engine during a 'Bodie' throttle transient and estimates the effect of transient heat transfer on compressor blade boundary layer growth. Total stored thermal energy available for release is determined considering compressor blades and roots only. Thermal energy released during a throttle transient is determined and allocated to individual compressor stages and used to estimate blade heat flux....
Topics: DTIC Archive, Wood,C W, AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH, *HEAT TRANSFER, *BOUNDARY...
This report determined the weight of nitrogen oxides (NOx) coming from 13 different F404-GE-400 engine tests at NAS Lemoore. The weight of nitrogen oxides from each test was determined by adding the weights produced by each power setting used in the test. At each power setting, the amount of fuel used and the emission index for nitrogen oxides, which varies with the power setting, determine the amount of nitrogen oxides produced. The emission index is the pounds of nitrogen oxides produced per...
Topics: DTIC Archive, NAVAL AIR REWORK FACILITY NORTH ISLAND CA AIRCRAFT ENVIRONMENTAL SUPPORT OFFICE,...
0
0.0
Jan 4, 2021
01/21
by
Sebastian Sedlmeier (carver0510)
data
eye 0
favorite 0
comment 0
Hi, first I want to say a big thanks to DrunkenMonkey288, who made this awesome design: https://www.rockcrawler.de/wcf/user/9416-drunkenmonkey288/ It also works great in wet conditions and it is modular, so you can extend the bridge when needed! I modified the design by Drunkenmonkey288 by reducing the height and the length of the bridge, so two bridges will fit perfectly to the M416 Trailer by OSSUM. You'll finde a picture, how to store it in the trailer (inner dimensions 182mm x 97mm). The...
Topics: defender, ossum, M416, trx4, scale, crawler, 110, rc4wd, drunkenmonkey288, Trailer, trx-4, wraith,...
0
0.0
Jan 8, 2021
01/21
by
Natasha Adsit (Natashabashya)
data
eye 0
favorite 0
comment 0
A fully core less and yokeless axial flux alternator. Two magnet rotors are required for this to work. And 32 magnets per rotor. The rotor employs a Halbach Array. The main primary magnets are 25x10x3, which I pulled from a hoverboard motor. The magnets to create the halbach array are 20x10x2.6 which also came from smaller hoverboard motors. If using really fine enamelled magnet wire such as 30 AWG, than twist two strands together, or even three. I used quite a few diff AWG in mine. If using...
Topics: diy pmg, 3D Printing, stl, pmg, pancake motor, axial flux generator, thingiverse, axial flux...
1
1.0
Jan 16, 2021
01/21
by
Jamie MacPherson (Jamiespace)
data
eye 1
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jzJeXqqkvV0
Topics: Axial_Scx10, jack, scale_model, thingiverse, Hi-lift, tamiya, 3D Printing, stl
0
0.0
Jan 21, 2021
01/21
by
dominic michel (domi1974)
data
eye 0
favorite 0
comment 0
Needed some shock mounts for SCX10 frame. No body post mounts included. You can use this clip (made by Lauden) to add a mount: https://www.thingiverse.com/thing:3055408/ You can use them for this thing: https://www.thingiverse.com/thing:2937260 If you want to place your motor in the front you can use this mount: https://www.thingiverse.com/thing:3047387
Topics: Chassis, Offroad, RC4WD, Gelä, ndewagen, scaler, 4x4, thingiverse, crawler, rail, RC_Car,...
0
0.0
Jan 19, 2021
01/21
by
(Puredeath)
data
eye 0
favorite 0
comment 0
A bed designed to work with [jruutiai](https://www.thingiverse.com/jruutiai/about)'s [Rear inner Fenders](https://www.thingiverse.com/thing:2804455) or stand alone. There are 2 versions available: one with slots for wire tying electronics and one that is solid.
Topics: Axial_Wraith, thingiverse, wraith, R/C Vehicles, stl
0
0.0
Jan 21, 2021
01/21
by
Kent Dixson (KentDixson)
data
eye 0
favorite 0
comment 0
1.9 Beadlock wheel for R/C car 12mm hex
Topics: Axial_Scx10, 12mm_hex, 19_beadlock, beadlock, thingiverse, RC_car_12mm_hex, RC_Car, R/C Vehicles,...
Fatigue tests were conducted with constant-amplitude axial stresses in the ratio of minimum to maximum stress of 0.05 (R=0.05). Specimens with and without strain gages were tested at 21 C, and superalloy specimens with and without strain gages were tested at 21 C and 815 C.
Topics: NASA Technical Reports Server (NTRS), ALUMINUM ALLOYS, AXIAL STRESS, BACKUPS, FATIGUE (MATERIALS),...
0
0.0
Jan 20, 2021
01/21
by
Mike Key (MikeKey)
data
eye 0
favorite 0
comment 0
I've been meaning to make a fuel cell for my Honcho for a while, so I was pretty pleased when I found HarleyDesigns' (via his budget build YouTube series) design here. I started out remixing it just to take metric hardware, but ended up making a lot of changes and remodelling it on a picture of another fuel cell I found online. The body is now hollowed out and the lid removable so you can keep spares like body clips or maybe rod ends in there while you're out on the trail. I guess you could...
Topics: Axial_Scx10, axial_honcho, thingiverse, Fuel_cell, Fuel_tank, R/C Vehicles, stl, Axial
0
0.0
Jan 15, 2021
01/21
by
Brian Taylor (plarf)
data
eye 0
favorite 0
comment 0
this is a 1:10 scale hose nozzle that will fit over some 2.6mm electrical wire
Topics: R/C Vehicles, thingiverse, Axial_Scx10, scale_model, scale, garden_hose, stl, scx10, hose, 1:10...
0
0.0
Jan 21, 2021
01/21
by
dominic michel (domi1974)
data
eye 0
favorite 0
comment 0
I saw the CJ5 Jeep as the OSSUM Version and wanted to make one by my own. It can be used with the SCX10 Cassis I made for the Suzuki SJ 410 Body (https://www.thingiverse.com/thing:2956295). I think It can be used with yota axles, leafsprings and tires around 90mm diameter. The Wheelbase is something between 260mm and 270mm. The dimensions of the body are: Overall lengh: 410mm; Inside from Grill to Back 390mm Wide: 203mm I did not print it yet and I guess some parts have to be adjusted (e.g. the...
Topics: Chassis, Jeep CJ 5, Axial_Scx10, thingiverse, 1:10, body, jeep, Karosserie, rc car, R/C Vehicles, 1...
The experimental approach adopted for low cycle fatigue tests of alloy 800H involved the use of electrohydraulic test systems, hour glass geometry specimens, diametral extensometers, and axial strain computers. Attempts to identify possible problem areas were complicated by the lack of reliable data for the heat of Alloy 800H under investigation. The method adopted was to generate definitive test data in an Interlaboratory Fatigue Test Program. The laboratories participating in the program were...
Topics: NASA Technical Reports Server (NTRS), ALLOYS, AMBIENT TEMPERATURE, AXIAL STRAIN, CYCLIC LOADS,...
Tip clearance has long been known to be a source of losses in axial compressors with cantilevered blades. The reasons for the losses, however, are not well understood and current practice in engine design still requires extensive effort to maintain constant minimal operating clearances over a wide range of conditions. The emphasis on clearance control may be appreciated by the typical observation that a ten percent change in peak static pressure rise in a compressor stage may occur for a fifty...
Topics: DTIC Archive, Moyle,I, EXOTECH PTY LTD MONTEREY CA, *TOLERANCES(MECHANICS), *AXIAL FLOW COMPRESSOR...
An investigation was conducted to compare the steady-state and dynamic flow characteristics of an axial-flow fan which had been used previously as the air supply fan for some model air cushion landing system studies. Steady-state flow characteristics were determined in the standard manner by using differential orifice pressures for the flow regime from free flow to zero flow. In this same regime, a correlative technique was established so that fan inlet and outlet pressures could be used to...
Topics: NASA Technical Reports Server (NTRS), AIR CUSHION LANDING SYSTEMS, AXIAL FLOW, FANS, FLOW...
Finite element analyses were performed to investigate theoretically the effects of in-plane and out-of-plane eccentricities, bending or twisting, and thickness nonuniformity on the axial stress and strain variations across the width of off-axis specimens. The results are compared with measured data and are also used to assess the effects of these eccentricities on the fracture stress of off-axis fiber composites. Guidelines for detecting and minimizing the presence of eccentricities are...
Topics: NASA Technical Reports Server (NTRS), AXIAL STRAIN, AXIAL STRESS, CARBON FIBER REINFORCED PLASTICS,...
The effect of delta tabs on mixing and the phenomenon of axis switching in free air jets from various asymmetric nozzles was studied experimentally. Flow visualization and Pitot probe surveys were carried out with a set of small nozzles (D = 1.47 cm) at a jet Mach number, Mj = 1.63. Hot wire measurements for streamwise vorticity were carried out with larger nozzles (D = 6.35 cm) at Mj = 0.31. Jet mixing with the asymmetric nozzles, as indicated by the mass fluxes downstream, was found to be...
Topics: NASA Technical Reports Server (NTRS), AIR JETS, AXIAL FLOW, FLOW VISUALIZATION, FREE FLOW, JET...
Cumulative fatigue behavior of a wrought cobalt-base superalloy, Haynes 188 was investigated at 538 C under various single-step sequences of axial and torsional loading conditions. Initially, fully-reversed, axial and torsional fatigue tests were conducted under strain control at 538 C on thin-walled tubular specimens to establish baseline fatigue life relationships. Subsequently, four sequences (axial/axial, torsional/torsional, axial/torsional, and torsional/axial) of two load-level fatigue...
Topics: NASA Technical Reports Server (NTRS), AXIAL LOADS, SEQUENCING, TORSION, COBALT, HEAT RESISTANT...
0
0.0
Jan 8, 2021
01/21
by
Jim C (REVolutionX)
data
eye 0
favorite 0
comment 0
The Axial UMG10 6x6 comes with the windshield wiper screws directly against the lexan. Having had the top half of the snorkel's screws punch through the lexan, I figured I better add some washers for these windshield wiper screws as well.
Topics: Toys & Games, axialracing, stl, rccrawler, 6x6, axial, thingiverse, umg10
0
0.0
Jan 8, 2021
01/21
by
Jeff Hengesbach (jeffhengesbach)
data
eye 0
favorite 0
comment 0
eMax Servo Mount for Axial SCX24 with 4 link mount. Note: it is shifted slightly towards the right. I found the emax was a bit wider than stock and would consistently hit the left side frame rail
Topics: R/C Vehicles, SCX24, Axial_SCX24, stl, thingiverse
0
0.0
Jan 16, 2021
01/21
by
Erich Ficker (Eficker)
data
eye 0
favorite 0
comment 0
Basic battery box for relocating battery to the front of the truck between the shock towers. For a normal install you'll need two of the longer spacers and one of the shorter spacers. It is shown here with full headed cap screws, but if you use the stock screws or buy some counter-sinking conical headed screws, they should sit flush with the bottom of the tray.
Topics: Axial_Scx10, crawler, thingiverse, rc_crawler, R/C Vehicles, stl, Axial, scx10
362
362
May 23, 2011
05/11
by
Roy, Roland R.; Hodgson, John A
texts
eye 362
favorite 0
comment 0
The following study was done in males earlier and was essentially repeated in females. Normal rats were anesthetized and prepared for one of the following procedures using the tibial (T), peroneal (P), sural (Su), and/or soleus (So) nerves: sham control - dissection of the nerves but no transection or stimulation; nerve transection and stimulation of the proximal end of T, P and Su; nerve transection and stimulation of the distal end of T, P and Su; nerve transection and stimulation of proximal...
Topics: DESIGN ANALYSIS, SURFACE GEOMETRY, AXIAL FLOW, RADIAL FLOW, TURBOMACHINERY, ROTOR DYNAMICS, ROTOR...
1
1.0
Jan 7, 2021
01/21
by
nazif erbay (nzferby)
data
eye 1
favorite 0
comment 0
Stl files will be sent to the mail that deposits 95 dollars to my paypal account. (Paypal : naziferbay@gmail.com) for 22x22x22 table size.
Topics: R/C Vehicles, stl, toyota tacoma, axial, sxc10, thingiverse, toyota, tacoma
Topics: DTIC Archive, Brady, W G, CORNELL AERONAUTICAL LAB INC BUFFALO NY, *AXIAL FLOW COMPRESSORS,...
A 50-centimeter-diameter axial-flow transonic compressor stage with multiple-circular-arc blades was designed and tested to study the effects of blade shape on efficiency and stall margin. At design speed, peak efficiency of 0.80 occurred at an equivalent weight flow of 29.0 kilograms per second. Measured total pressure ratio and total temperature ratio at peak efficiency were 1.69 and 1.20, respectively. The stall margin at design speed and an equivalent weight flow of 29.0 kilograms per...
Topics: NASA Technical Reports Server (NTRS), AERODYNAMIC CONFIGURATIONS, AXIAL FLOW TURBINES, COMPRESSOR...
1
1.0
Jan 6, 2021
01/21
by
Tommy Hammel (tormies)
data
eye 1
favorite 0
comment 0
wire combs for 1/10 scale rc cars. perfect for motor wires, battery leads, and esc wires.
Topics: element rc, tamiya, team_asociated, redcat, RC_Car, losi, scx10_2, wire comb, wire, scx10, R/C...
0
0.0
Jan 21, 2021
01/21
by
Joseph Unik (relic)
data
eye 0
favorite 0
comment 0
7/22/2018 - Finished & added base/frame that bolts to stator. Posted updated diagrams UPDATED STL FILES: Realized that I had the bearings in the wrong place. Should be in the stator not the 2 rotors. Updated both models and stator will accept 2 bearings to support the weight. Also added some spacers around the shaft. If using 2 rotors ... one on either side ... make sure the poles are aligned with each other Marked as a work in progress but ready to print. Fact is that I cannot afford the...
Topics: coil, stator, flux, wind, DIY, thingiverse, power, rotor, pma, generator, axial, stl, former
2
2.0
Jan 12, 2021
01/21
by
Robert Posey (Voodoobrew)
data
eye 2
favorite 0
comment 0
Cargo tray for axial bomber, Mounts to rear shock mount. I relocated my shocks to rear axle and Used one of the gas tank screws for the top shock. V2 can mount with stock rear shock configuration. and has thicker walls, and has hand holes for straps, and its just better you should use v2, also its narrower. just change top shock screw to a longer 20mm screw. This gives you a good place to put your scale accessories like gas cans, oil jugs, straps, sleeping bags, ice chests, ect...
Topics: R/C Vehicles, thingiverse, stl, axial, bomber, axial_bomber, RR10_Bomber, crawler
56
56
Nov 25, 2009
11/09
by
NASA Goddard Space Flight Center
movies
eye 56
favorite 0
comment 0
Cosmic Origins Spectrograph (COS) will be the most sensitive ultraviolet spectrograph ever flown on Hubble. COS will probe the "cosmic web" - the large-scale structure of the universe whose form is determined by the gravity of dark matter and is traced by galaxies and intergalactic gas. COS will explore how the "cosmic web" evolved from ancient times. COS will also sample the chemical content and physical state of gas in distant galaxy halos, providing important insight into...
Topics: Hubble Space Telescope, HST, SM4, Servicing Mission 4, EVA, COS, COSTAR, Axial Replacement, What --...
Source: http://svs.gsfc.nasa.gov/goto?10232
2
2.0
Jan 14, 2021
01/21
by
Dean Miller (3ddeano)
data
eye 2
favorite 0
comment 0
Hi,I am Interested in building a 3 phase axial flux wind generator motor,i haven,t made this coil winder yet,so i hope that my scaling is ok?,required x1 length 100mm bolt, 6mm in diameter x2 washers,inserted through the centre to hold it all together.the two disks are 100mm in diameter i also added a spacer tube,i thought this might help in removing the copper coils after winding.
Topics: 3 phase stator build, thingiverse, 3 phase generator, stl, pancake_engine, DIY, magnetic generator,...
