6
6.0
Jun 18, 2020
06/20
by
Center for Accessible Technology in Sign
movies
eye 6
favorite 0
comment 0
ASL vocabulary
Topic: buffer
5
5.0
Jan 27, 2021
01/21
by
Center for Accessible Technology in Sign
movies
eye 5
favorite 0
comment 0
ASL vocabulary
Topic: buffer
From the bitsavers.org collection, a scanned-in computer-related document. wang :: ois-140 :: schematics :: 210-7504
Topics: buffer, ffl, ami, data, data buffer
13
13
Jun 18, 2020
06/20
by
Center for Accessible Technology in Sign
movies
eye 13
favorite 0
comment 0
ASL vocabulary
Topic: buffer,buffest
R&D Report 1992-12 : Experiments with the HIVITS HDTV contribution codec A.D.R. Cotton, N.D. Wells As more and more programmes are made in high definition television (HDTV) formats, so the need to provide complete production facilities will increase. An important part of television production is the ability to transmit very high quality television signals over long distances for programme contribution purposes. For example, this may be from an outside broadcast unit to a television studio...
Topics: buffer, coder, hdtv, codec, decoder, occupancy, regulation, stripe, transmission, quantiser,...
2
2.0
Sep 13, 2021
09/21
by
Bryan Wallbridge (Cweord)
data
eye 2
favorite 0
comment 0
A buffer designed for multi filament systems with mounts for the Prusa i3 Mk3S. There are options to have a spot in the bottom for a descant bag, or a shorter version instead. 2 different kinds of supports Options for all to, and front and rear angled PTFE tube holders (designed to hold m10 holders) I recommend the all top version, as the angled ones are harder to load and have more friction (But they do work). For the dry version print the Dehumidifier Lower Body and Dehumidifier Base,...
Topics: stl, 3D Printer Accessories, thingiverse, Buffer, filament_buffer
4
4.0
Mar 3, 2021
03/21
by
Ripper121 (ripper121)
data
eye 4
favorite 0
comment 0
This is a H3 Buffer for the AR15. I used a Standard AR15 buffer with 3 oz (85g) and replaced the aluminium shell (enclosure) with this steel shell and got 5,54 oz (157g) H3 Heavy Buffer. Like you can see, the weight Calculation out of Fusion 360 are quite accurate. The shell was calculated 94,65g in real I got 95g. So you can Tune the weight in Fusion to fit your needs. With the Standard 3oz Buffer the extractor ripped off the rim of my 223Rem Cases, now with the Heavy 5,54 oz Buffer, I dont...
Topics: Tools, recoil_buffer, AR15, heavy, thingiverse, stl, Buffer
108
108
Aug 24, 2013
08/13
by
European Telecommunications Standards Institute
texts
eye 108
favorite 0
comment 0
Topics: QoS, jitter buffer
From the bitsavers.org collection, a scanned-in computer-related document. dg :: software :: diag :: 068-000157-03 inter-processor-buffer-reliability
Topics: rvj, buffer, reliability
90
90
Jul 3, 2014
07/14
by
GALAL A. HASSAAN
texts
eye 90
favorite 0
comment 0
Too many passengers die or injure every year because of highway accidents. Most of the vehicle manufacturing companies are unable successfully to control this matter. This paper handles the optimal design of a passive spring-damper buffer that can be attached to the vehicle from its front, rear or both sides to avoid catastrophic effects due to collision. The optimization toolbox of MATLAB is used to minimize an absolute error objective function to keep the dynamic motion of the crashing...
Topics: Highway Accidents, Passive Buffer, Optimal Buffer Design, Semi-Optimal Buffer Design, MATLAB...
72
72
Jul 4, 2014
07/14
by
GALAL A. HASSAAN
texts
eye 72
favorite 0
comment 0
Too many passengers die or injure every year because of highway accidents. Most of the vehicle manufacturing companies are unable successfully to control this matter. This paper handles the optimal design of a passive spring-damper buffer that can be attached to the vehicle from its front, rear or both sides to avoid catastrophic effects due to collision. The optimization toolbox of MATLAB is used to minimize an absolute error objective function to keep the dynamic motion of the crashing...
Topics: Highway Accidents, Passive Buffer, Optimal Buffer Design, Semi-Optimal Buffer Design, MATLAB...
9
9.0
Jun 10, 2021
06/21
by
Juan Jose Porta (juanjoporta)
data
eye 9
favorite 0
comment 0
Accessory designed for Glock 17 and 19 Gen3 to cushion the shock between the steel slide and the polymer frame.
Topics: glock, Sport & Outdoors, Buffer, thingiverse, recoil, recoil buffer, stl
6
6.0
Mar 8, 2021
03/21
by
James Toy (jtsanchez)
data
eye 6
favorite 0
comment 0
RAWIE type friction buffer stop. Scaled to fit OO-gauge, Code 75 rail
Topics: Buffer_stop, stl, thingiverse, Model_Trains, Buffer, 3D Printing
Biodiversity Heritage Library
346
346
Dec 19, 2017
12/17
by
Longmire, Jonathan L; Maltbie, Mary; Baker, Robert J; Texas Tech University.Museum
texts
eye 346
favorite 0
comment 0
Caption title
Topics: Buffer solutions, DNA
4
4.0
Apr 27, 2021
04/21
by
Hardy Hardy (Hardy74)
data
eye 4
favorite 0
comment 0
Erstmal möchte mich für die Inspirationen durch die Entwickler der bisherigen Filamentpuffer bedanken. https://www.thingiverse.com/thing:3894874 https://www.thingiverse.com/thing:3606350 Wie auch bei meinen Vorgängern liegt bei mir der Anspruch im wesentlichen an der einfachen Handhabung beim Filamentwechsel des Filamentpuffers für den MMU2S. Die Filamente müssen zum Wechseln von oben einzeln zugänglich sein. Als zweiten Anspruch habe ich das Design so ungesetzt dass möglichst viele...
Topics: prusa_filament_buffer, thingiverse, MMU2S_S_Buffer, Buffer, mmu2, multimaterial, filament...
5
5.0
Mar 17, 2021
03/21
by
jake har (ridingtoantarctica)
data
eye 5
favorite 0
comment 0
This is a replacement Ryobi buffer wheel backing. I'd recommend 100% infill because the buffer takes a beating. I threw it on my lathe too and it worked great.
Topics: Buffer wheel, Wheel, Machine Tools, stl, Ryobi, thingiverse, Buffer
7
7.0
Jan 20, 2021
01/21
by
John Smith (Kjaskaar)
data
eye 7
favorite 0
comment 0
This is a replacement buffer for the Mini Draco pistol. Pretty sure it works for the Micro Draco as well, but I don't own one and can't say for sure.
Topics: recoil_buffer, Draco, thingiverse, Sport & Outdoors, Buffer, ak47, stl, mini
From the bitsavers.org collection, a scanned-in computer-related document. interdata :: 32bit :: os32 :: lang :: 48-103F00R00 C PgmgRef 1984
Topics: file, character, returns, buffer, text, string, integer, characters, pointer, program, control...
TRS-80 Manual: E-Z Packet 80 v1.1 (1986)(Martin Company)
Topics: buffer, program, tnc, mode, disk, file, text, command, edit, screen, buffer selection, tnc buffer,...
From the bitsavers.org collection, a scanned-in computer-related document. westinghouse :: MDE1002 DPS2402refMan
Topics: interrupt, instruction, buffer, contents, data, input, location, channel, output, data systems,...
From the bitsavers.org collection, a scanned-in computer-related document. dec :: disc :: rx02 :: EK-0RX02-TM-001 RX02 Tech Oct78
Topics: data, error, buffer, interface, sector, function, command, density, flag, sector buffer, data...
From the bitsavers.org collection, a scanned-in computer-related document. dec :: dsa :: ci :: EY-9222E-SA 0001 VAXclWbk#1
Topics: test, port, diagnostics, buffer, data, node, module, interface, diagnostic, test test, port...
3
3.0
Jun 7, 2021
06/21
by
(Xuis)
data
eye 3
favorite 0
comment 0
UPDATE NOTE: After trying this for a bit, I made some changes. I want to bring the buffer away from the table leg to allow the tubing to have a smooth curve to the MMU. I also wanted to angle the whole buffer slightly to ensure the tubing between the buffer and MMU is one smooth curve instead of any squggily curves that will increase friction on the filament path. The new version is called BufferMountAngled...
Topics: mount, filament_buffer, mmu2s, Buffer, thingiverse, stl, 3D Printer Accessories
138
138
Aug 24, 2013
08/13
by
European Telecommunications Standards Institute
texts
eye 138
favorite 0
comment 0
Topics: jitter buffer, QoS, quality
5
5.0
Mar 15, 2021
03/21
by
Luke McNeice (lukemcn)
data
eye 5
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online: https://www.tinkercad.com/things/fYcGN7z4sFk Remix of Martin Jerabek's MMU Buffer: https://www.thingiverse.com/thing:4311235 I needed to fit an MK3, MMU2S, buffer and 5 filament reels inside the space of a small cupboard. For a compact space I found Martin's design by far the best and most robust approach. To achieve this I modified the original side piece to be more symmetrical allowing both sides to be used for slot access simultaneously. By...
Topics: thingiverse, mmu2s, filament_buffer, stl, mmu, Buffer, 3D Printer Accessories
3
3.0
Sep 13, 2021
09/21
by
Bruce Pratt (TrainmanBruce)
data
eye 3
favorite 0
comment 0
G Scale Buffer. I designed this for ease of printing. No supports required, but need to turn main buffer 90 deg, to put Buffer Beam down. For rail stop, also rotate top to make holes horizontal. Rail stop halves held together with 2 m3 x16mm self tappers. Buffer plank can be glued to main buffer. I managed to just have a press fit, no glue required. I have. Creality CR-6 SE, factory standard. 05 September. Upload Rail stop bottom. Originally not up loaded. 06 September Uploaded new Buffer10.stl...
Topics: LGB, stl, thingiverse, Buffer, G Scale, DIY, DIY_LGB, Buffer_Stop
131
131
software
eye 131
favorite 0
comment 0
Dump of the EPROM found in a PB-256-2 Printer Buffer. Original has a Fujitsu MB8516 (2kx8) EPROM, but any pin-compatible EPROM should work (e.g. 2716). The label says "PB-256E V1.2 ATEN". There was no manufacturer marking on the device. The EPROM dated to 1986, but the rest of the chips were from 1990.
Topics: eprom, printer buffer, firmware
From the bitsavers.org collection, a scanned-in computer-related document. dec :: pdp10 :: KC10 Jupiter :: NIA IntfSpec Jul81
Topics: buffer, receive, data, address, port, parity, transmit, status, nia, status register, receive...
From the bitsavers.org collection, a scanned-in computer-related document. 3Com :: Etherbox Sep83
Topics: buffer, transmit, etherbox, ethernet, interrupt, collision, receive, status, packet, pointer,...
From the bitsavers.org collection, a scanned-in computer-related document. interdata :: 32bit :: os32 :: 7.2 1984 :: 48-079F00R00 OS32 NetworkDrivers 1984
Topics: command, data, buffer, driver, mode, commands, ethernet, status, zbid, foo, foo roo, data field,...
5
5.0
Mar 22, 2021
03/21
by
Craig Easter (JokerToolWorks)
data
eye 5
favorite 0
comment 0
This is an AEG M4 buffer tube for airsoft toys. It will fit Milspec stocks (not Commercial Spec). It also has a file for the nut. To install this, you will need an M5x75mm screw (the common length used for airsoft guns). You could also just glue it in place, I suppose. I made this as an optional part for the JTW HCC-2A, an open-source carbine kit for Tokyo Marui Hi-CAPA 5.1's and derivatives. You can download it here for free: https://www.thingiverse.com/thing:3712294 This design is currently a...
Topics: airsoft, mil_spec, stl, electric, aeg, buffer, buffer_tube, nut, Sport & Outdoors, thingiverse,...
From the bitsavers.org collection, a scanned-in computer-related document. ibm :: 2250 :: A27 2721-0 2250mod3Descr
Topics: buffer, display, data, character, byte, command, program, detect, mode, cursor, light pen, buffer...
From the bitsavers.org collection, a scanned-in computer-related document. microdata :: reality :: RPL 1.3 Reference Man
Topics: buffer, command, input, attribute, reference, statement, rpl, output, stack, manual, input buffer,...
138
138
Aug 24, 2013
08/13
by
European Telecommunications Standards Institute
texts
eye 138
favorite 0
comment 0
Topics: jitter buffer, QoS, quality
86
86
Feb 21, 2014
02/14
by
Alfredo Ortega
movies
eye 86
favorite 0
comment 0
OpenBSD was one of the first systems to incorporate the KAME IPv6 stack software, supporting next-generation protocols for network communication. Some glue logic is needed to adapt this stack to the internal networking mech- anisms of the OS, and is in some of these functions that a buffer overflow was found. Specifically, the function m dup1() on the file sys/kern/uipc mbuf2.c is called every time that a specially crafted fragmented icmpv6 packet is re- ceived by the IPv6 stack. This function...
Topics: buffer overflow, network communication
6
6.0
Apr 20, 2021
04/21
by
jake har (ridingtoantarctica)
data
eye 6
favorite 0
comment 0
This is a buffer system for a lathe which I made. Put a 3/8" bolt (or change to whatever size bolts you have lying around) in this thing and attach to lathe. Saved me $100 from what this costs on amzn. To keep the polisher wheels from slipping you can use a couple nuts to sandwich the wheels or I used an extra T-nut and a nut.
Topics: thingiverse, Buffer, Lathe, stl, Machine Tools, Bowls, Buffer Wheel, Wheel, Polish
From the bitsavers.org collection, a scanned-in computer-related document. ict icl :: 1900 :: 1904E :: 1904E WGC07-3 Character Data Buffer Control Drawings
Topics: buffer, pasout, data, sou, pas, panci, pangsout, pan, character, control, data buffer, character...
3
3.0
Jun 21, 2021
06/21
by
M Ro (MrMRo)
data
eye 3
favorite 0
comment 0
Recoil buffer for the S&W model 41 My own design but it looks similar to the commercial ones because there is not much room in there for something more flashy. Still it has some minor improvements with chamfered corners and 3d-printer friendly angles. Installation: If you know what this is you know where to put it... Print in any flexible material. Use enough perimeters to get a solid part.
Topics: Sport & Outdoors, recoil_buffer, thingiverse, smith_and_wesson, stl, Buffer, recoil
12
12
Jan 11, 2021
01/21
by
Nick (Crashin_Machines)
data
eye 12
favorite 0
comment 0
This is a plug meant for the buffer tube threads on an AR lower receiver. Mainly this is used for a dedicated 22lr AR pistol because there is no need for a buffer tube.
Topics: thingiverse, 22LR, buffer_tube, Sport & Outdoors, stl, Buffer, AR15, guns, firearms
5
5.0
texts
eye 5
favorite 1
comment 0
xiv, 245 p. : 23 cm
Topics: Buffer states, World politics
From the bitsavers.org collection, a scanned-in computer-related document. hp :: 9000 dio :: 98642 HP-DIO Four Channel Mux Firmware ERS Aug84
Topics: host, interrupt, buffer, transmit, port, modem, data, receive, transmit buffer, semaphore register,...
5
5.0
Mar 31, 2021
03/21
by
Christopher Litsinger (x0pherl)
data
eye 5
favorite 0
comment 0
*Why another Filament Buffering Solution?* I wanted a solution that met the following requirements: - Does a decent job of handling retracting filament (duh) - Fully 3d printable while ideally using a minimal amount of filament - Retains maximum visibility of filament in the system - Easy to change filament The openscad source for this project is available under the MIT license at https://github.com/x0pherl/Filament-Bank This is a filament buffering system designed for use with the Prusa MMU2s,...
Topics: MMU2S_S_Buffer, mmu2s, thingiverse, openscad, filament_buffer, prusa_filament_buffer,...
From the bitsavers.org collection, a scanned-in computer-related document. ibm :: 1620 :: fe :: 227-5816-0 1620 Model 1 1622 Card Read Punch Feature Customer Engineering Manual of Instruction Sep63
Topics: punch, trigger, latch, turned, buffer, data, punch buffer, card punch, power supply, read buffer,...
3
3.0
Apr 5, 2021
04/21
by
Chase Garza (Ogrelorde)
data
eye 3
favorite 0
comment 0
AR Buffer plug to be used for a brace. I use Carbon Fiber PLA to print any parts for an AR. Thanks, Enjoy!
Topics: thingiverse, Sport & Outdoors, picatinny, stl, Buffer, recoil_buffer, Picatinny_rail,...
CRT Refresher, display buffer - Digital Devices Inc. 1967
Topics: delay, interface, bits, data, display, buffer, mhz, ddi, electronics, logic, display buffer
10
10.0
Mar 21, 2021
03/21
by
someone someone (PSomeone)
data
eye 10
favorite 0
comment 0
Prototyping a Spring Loaded Recoil Pad for a Tikka T3 Lite (Compact) BOM has parts from McMaster Carr Called out. (read whole description) Next Version will have Brass Bushings added but this works nicely and spring can be changed to your liking, the rubber grommet seen worked really well but springs also work try a 15-20lb. Pics shown on rifle were the crude first try note spring exposed, new design spring is housed in the stock. Recoil pad was printed urethane - best part is you can change...
Topics: stl, recoil_buffer, Tikka_t3, recoil, Gadgets, Buffer, thingiverse, tikka lite, Tikka, Rifle
Determination of Extraction Buffer and Ammonium Sulfate Percentage for Pollen Crude Protein Extracts of Mangifera, Durio and Syzygium Fruit Flowers
Topics: Flower, Pollen, Protein, Buffer, Precipitation
7
7.0
Apr 18, 2021
04/21
by
Duane Herbert (dbjherbert)
data
eye 7
favorite 0
comment 0
HO Guage buffer - fits perfectly
Topics: Buffer_stop, Props, thingiverse, stl
11
11
Jan 18, 2021
01/21
by
Rob Huurman (Robertino)
data
eye 11
favorite 0
comment 0
After printing thing www.thingiverse.com/thing:507254 I realised the buffer could not slide on to LGB rails. The parts hit the nails for the rail-fixtures. Removed ~2.5 mm material from the feet to have enough clearance to slide on LGB rails.
Topics: Buffer_stop, Vehicles, stl, thingiverse
From the bitsavers.org collection, a scanned-in computer-related document. dec :: disc :: rx01 :: EK-RX01-OP-001 RX11UM Nov76
Topics: error, buffer, data, rxol, sector, function, interface, flag, rxes, parity error, sector buffer,...