0
0.0
Jan 4, 2021
01/21
by
Paul FILLIETTE (Vorarox)
data
eye 0
favorite 0
comment 0
here is the video on how i did it https://www.youtube.com/watch?v=6nklWPlf4kg&t=7s
Topics: dc motor, stl, fan, dvd player motor, usb fan, 5v fan, thingiverse, DIY, dvd player
0
0.0
Jan 19, 2021
01/21
by
Berk Akira (Berk_2)
data
eye 0
favorite 0
comment 0
GW31ZY gear motor case
Topics: paper cutter motor, motor case, 3d_printer, gear motor case, thingiverse, Gear, dc_motor,...
0
0.0
Jan 16, 2021
01/21
by
Nikolaj Rahbek (b2vn)
data
eye 0
favorite 0
comment 0
I working on a robot and needed come way to mount the motor controller. Luckily I have a 3d printer :) The motor controller is a Double BTS7960B (http://www.ebay.com/itm/162618525315). When the controller is mounted, access to the supply and motor wires are quite cumbersome, since the screws are facing downwards. Therefore I also created a stencil for a drill guide. Please note, I have not tried the stencil my self, but using it should create a hole similar to the one shown in the plate I used....
Topics: arduino, BTS7960B, thingiverse, motor_controller, robotics, Robotics, mount, dc_motor_controller,...
1
1.0
Jan 5, 2021
01/21
by
Sean Stewart (TheHomeMAK3R)
data
eye 1
favorite 0
comment 0
3D Printed DC Motor Miniature Disc Sander for Disc Sanding Miniature 3D Prints. Scale to fit any DC Motor with a shaft.
Topics: dc motor, stl, mini, disc, sander, thingiverse, Electronics
5
5.0
texts
eye 5
favorite 0
comment 0
Estimation of motor inertia and friction components is a complex and challenging task in motion control applications where small size DC motors (<100W) are used for precise control. It is essential to estimate the accurate friction components and motor inertia, because the parameters provided by the manufacturer are not always accurate. This research proposes a Sensorless method of determining DC motor parameters, including moment of inertia, torque coefficient and frictional components...
Topics: Advance motion control, DC motor parameter estimation, Disturbance observer, Friction compensation,...
0
0.0
Mar 4, 2021
03/21
by
Michael (mika2de)
data
eye 0
favorite 0
comment 0
Hi :) this pump I designed for my self-made cocktail machine to pump the non-alcoholics. The older version of my machine (check it out on [cocktailnator.de](https://cocktailnator.de)) used a compressor and a pressure system, with the peristaltic pump it is now way easier. So when you need to pump your liquids quick and don't wanna spend much money on a pump, this one will do the trick. With the right motor in place the pump moves 400ml / 20 sec. The pump is design for a high spin but finding...
Topics: cocktail, machine, pump, dc_motor, liquid, DIY, thingiverse, Fluid, stl, peristaltic
1
1.0
Mar 5, 2021
03/21
by
Shawn Marsee (shawnm1)
data
eye 1
favorite 0
comment 0
the file includes the basic parts of a DC motor you could if you really wanted to make it an actual motor...
Topics: arduino, cutaway, mot, electronics, marmotte, Electronics, motter, DCmotor, mottor, stl, DC MOTOR,...
1
1.0
Mar 5, 2021
03/21
by
onur atak (onratak)
data
eye 1
favorite 0
comment 0
37mm dc motor without reduction. 3.17 mm motor mil.
Topics: motor, stl, 37mm_DC_motor, Electronics, 37mm, thingiverse
0
0.0
Jan 6, 2021
01/21
by
Marty Purcell (Maddoctor)
data
eye 0
favorite 0
comment 0
Motor mount for projects. Motor Dia. is 37mm approx. Mount is 77mm long - open at the back end. The motor was recovered from an old 12v DC battery drill, it has 2 screw mount holes on the front face.
Topics: motor, recovered, Battery drill, stl, thingiverse, DC Motor, 12v, motor_mount, Robotics
0
0.0
Jan 18, 2021
01/21
by
Igor Albuquerque (igorF2)
data
eye 0
favorite 0
comment 0
First Prize in the Instructables Wheels Contest, Second Prize in the Instructables Arduino Contest, and Runner up in the Design for Kids Challenge. Thanks to everyone who voted on us!!! http://www.instructables.com/id/Joy-Robot-Rob%C3%B4-Da-Alegria-Open-Source-3D-Printed-A/ Last update: 24/11/2018. Fixed holes for DC motors on wheel_right and wheel_left parts. Fixed holes for Arduino Uno R3 and L298N H-bridge on base part. Robots are getting everywhere. From industrial applications to...
Topics: fusion360, toy, opensource, mobile_robot, engineering, maker, robot, engineeringproject,...
0
0.0
Jan 16, 2021
01/21
by
Barys Markouski (Manuilware)
data
eye 0
favorite 0
comment 0
This is torbofan for cooling electric motor with one direction. It have more effectivity that ordinary fan's. Free for all ;) ENJOY!
Topics: fan, thingiverse, electric_motor, dc_motor, DIY, stl
3
3.0
texts
eye 3
favorite 0
comment 0
This article estimates the unknown dc motor parameters by adapting the adaptive model with the reference model created by experimental data onto armature current and speed response from separately excited dc motor. The field flux dynamics, which is usually ignored, is included to model the dynamics of the motor. The block diagram including the flux dynamics and model parameters is considered as the adaptive model. The integral time square error between the instant experimental data and the...
Topics: Cost function, Flux dynamics model, Integral time square error, Separately excited DC motor, Whale...
0
0.0
Mar 20, 2021
03/21
by
Juan Sirgado y Antico (jsirgado)
data
eye 0
favorite 0
comment 0
__Water centrifugal pump.__ For aquariums or small volumes of water. I used a 12v DC motor, 28mm diameter, 2mm shaft, with high speed, high torque. __You can help me to do more things like this.__ Buy my designs at pinshape:http://pinshape.com/users/27920-jsirgado The OpenSCAD file is there, you can change all.
Topics: fish, stl, Pets, dc_motor, Water, aquarium, centrifugal, peces, thingiverse, pump, motor
1
1.0
Jan 4, 2021
01/21
by
Mihai Oltean (moltean)
data
eye 1
favorite 0
comment 0
Jenny 5 is an (almost) humanoid robot intended to be used mainly for research but also as a human assistant. More details about Jenny 5 can be found at [https://jenny5.org](https://jenny5.org) or [https://jenny5-robot.github.io](https://jenny5-robot.github.io). Jenny 5 was inspired by the Johnny 5 robot from the Short circuit movie. This a great movie that anyone must see. Jenny 5 has a mobile platform with tracks, a pliable leg, two arms with 7 degrees of freedom each and one head All source...
Topics: motor, track, pulley, tracks, rubber, plywood, tank_tracks, humanoid, Planetary_Gear, johnny, arm,...
Brushless DC (BLDC) motors are attaining higher priority in industrial automation, computers, aerospace, military, household appliance and traction applications because of its high efficiency, high power density and low maintenance cost. To control a BLDC machine, it is generally required to measure the speed and position of rotor by using the sensor. Using the measured value of rotor position, each inverter phase acting at precise time will be commutated. This paper presents a simple digital...
Topics: Brushless DC Motor (BLDCM), Voltage Source Converter (VSC), Digital Pulse Width Modulation (DPWM),...
0
0.0
Apr 12, 2021
04/21
by
Kevin (abrokadabra)
data
eye 0
favorite 0
comment 0
The motor is available here, in a wide range of lower RPMs http://www.ebay.com/itm/Reversible-37mm-12V-DC-5-RPM-Gear-Box-Speed-control-Electric-Motor-Low-noise-/261526071044?pt=LH_DefaultDomain_0&hash=item3ce42b2704 Video: https://www.youtube.com/watch?v=ENMv5Eg8Sqk The Lazy Susan Bracket includes a T5 drive pulley and bracket, made to fit a 1/2" dowel. Maximum weight limit is ~25 kbs (10 kg)
Topics: thingiverse, DIY, 37mm_DC_motor, stl, 12v_motor, motor, mount, 37mm, electric
0
0.0
Apr 13, 2021
04/21
by
Umar Ashar (16uashar)
data
eye 0
favorite 0
comment 0
My science project for a DC Motor Car
Topics: thingiverse, dc_motor, Automotive, stl, 3_part
3
3.0
Mar 17, 2021
03/21
by
Khalid G. Mhammed, Jabbar A.F. Yahaya, Reyasudin Basir Khan
texts
eye 3
favorite 0
comment 0
This research presents a very important industrial issue of controlling the production target, despite changing loads. Engines of various types, whether synchronous or synchronous, operate on single and three phase AC, DC motors or special motors such as stepper and servo. In all these motors, the speed control of the torque and speed of the above motors has gained considerable importance. There are three main ways reviewed in the current search, the second that completes the previous research...
Topics: DC motor, Motor Controller, Speed Control, Three phase, Washing Machine
2
2.0
Mar 31, 2021
03/21
by
Hari Maghfiroh, Chico Hermanu, Muhammad Hamka Ibrahim, Miftahul Anwar, Agus Ramelan
texts
eye 2
favorite 0
comment 0
The electric motor is one of the appliances that consume considerable energy. Therefore, the control method which can reduce energy consumption with better performance is needed. The purpose of this research is to minimize the energy consumption of the DC motor with maintaining the performance using Hybrid Fuzzy-PID. The input of the Fuzzy system is the error and power of the system. Where error is correlated with matric Q and power is correlated with matric R. Therefore, adjusting the fuzzy...
Topics: DC motor, Energy, Fuzzy, LQR, PID
0
0.0
Mar 17, 2021
03/21
by
Adam Chojnacki (adam1004a)
data
eye 0
favorite 0
comment 0
prosty montaz silnika n20 do klockow znanego producenta
Topics: lego_compatible, LEGO, LEGO_Technic, stl, dc_motor, thingiverse, DIY
0
0.0
Jan 8, 2021
01/21
by
Blz Ahz (UtopianKing)
data
eye 0
favorite 0
comment 0
A mount for a Mini Plastic DC gearmotor. For my purposes it is not yet clear where exactly the screws will be, so this is designed to be printed solid and then the holes are to be drilled when their positions are known. Print time: 1 hour 48 minutes Filament used: 15.35 meters of PLA Estimated material cost (PLA): ~1.38 € (Calculated from 200 m spool with a price of 17,99 € ≈ 0.08995 / m)
Topics: dc_motor, thingiverse, stl, mount, DCmotor, gearbox, Robotics
0
0.0
Jan 15, 2021
01/21
by
Nikodem Bartnik (NikodemBartnik)
data
eye 0
favorite 0
comment 0
I am working on an app that will simplify sharing your social links with new friends, here you can find more info: https://scialize.com/ Working 3D printed pump very simple to make, just 3 parts. More info here: https://www.instructables.com/id/3D-Printed-Water-Pump/ https://www.youtube.com/watch?v=qX5YHNfzSao My Facebook: https://www.facebook.com/Nikodem-Bartnik-1891157704439330/ You have to use supports. You can buy this motor here: https://goo.gl/G5ucZs or here https://goo.gl/QYwQk9
Topics: fusion360, Creality_CR-10, thingiverse, nikodem bartnik, 3d_printed, stl, dc motor, pump,...
0
0.0
Jan 18, 2021
01/21
by
jamie calmeyn (logictechratlab)
data
eye 0
favorite 0
comment 0
If you are designing a drone frame you can use this model as a reference.
Topics: Brushless DC, Brushless DC motor, thingiverse, Brushless, BR2205, R/C Vehicles, motor, stl
0
0.0
Jan 21, 2021
01/21
by
jake har (ridingtoantarctica)
data
eye 0
favorite 0
comment 0
Hello I've been making bowls on the lathe for a few years now and typically have issues with drips when dealing with polyurethane, epoxy, etc. Printed up this guy to hold the slow RPM DC motor. The Arduino board isn't necessary, I just used it to throw in a potentiometer which can control the rotation speed perfectly. Throw some hot glue at the end to make the bowl stick. Enjoy if you like to finish bowls too!
Topics: Bowl, thingiverse, RPM, Wood Bowl, Hobby, Lathe, low_rpm, DC Motor, Polyurethane, Epoxy, stl
0
0.0
Jan 19, 2021
01/21
by
serge koval (sergek)
data
eye 0
favorite 0
comment 0
Very generic pump with no dependency on electric motor. Basically just snap gear or pulley on alongside with motor and its ready to go. Bom: - 6mm diameter silicone tube - 6pcs 4x13x5mm bearings - 2pcs 8x22x7mm bearings - 8mm shaft (I've used aluminium tube) - 4pcs 20mm m4 screws with nuts - 4pcs 45mm m3 screws with nuts
Topics: Peristalic, brushless, pump, peristaltic, thingiverse, peristaltic_pump, water_pump_using_dc_motor,...
0
0.0
Jan 18, 2021
01/21
by
Ferhat Döğüş (ferhatdogus)
data
eye 0
favorite 0
comment 0
Wheels of arduino dc engines If you have made this thing, PLEASE take pictures and post! Thanks. If you have made this thing, PLEASE take pictures and post! Thanks. If you have made this thing, PLEASE take pictures and post! Thanks.
Topics: arduino, Arduino_Uno, robot, thingiverse, arduino_robot, Arduino_Mega_2560, Arduino_Nano, dc_motor,...
50
50
Jul 25, 2016
07/16
by
Debabrata Pal and J B Gurung, Aksum University, College of Engineering and Technology Department of Electrical and Computer Engineering Ethiopia, NE Africa Email:debuoisi@gmail.com
texts
eye 50
favorite 0
comment 0
Abstract This paper presents comparison between full order and minimum order observer controller design using MATLAB environment. As a matter of fact, it has shown how to implement a dc motor state space model and its observer. Different observer gain(s) are determined by selecting different Eigen values for the observers. Both designed controllers are tested using root locus method by varying different observer poles. Having full understanding of the observer controller implementation(s),...
Topics: Observer controller Design, State space, DC Motor, Minimum-Order Observer, Implementation in MATLAB
0
0.0
Jan 15, 2021
01/21
by
ALFREDO REGO DIAZ (tximy)
data
eye 0
favorite 0
comment 0
Stand for tt geared dc motor, I buy it as is at : http://s.aliexpress.com/zAneyqmQ
Topics: Gear_Reducer, dc_motor, thingiverse, stand, Electronics, stl, geared_motor
2
2.0
Jan 10, 2021
01/21
by
JOE CALDERON (sleepybishop)
data
eye 2
favorite 0
comment 0
a small airsoft turret powered by a small dc motor, perfect accompaniment perhaps for a small robot spider. set for 6mm pellets but customizable via openscad sources. gear and rack made possible by [thing:5505](http://thingiverse.com/thing:5505)
Topics: Mechanical Toys, dc_motor, thingiverse, stl, Attacknids, airsoft
0
0.0
Jan 4, 2021
01/21
by
Garm (Gaudens)
data
eye 0
favorite 0
comment 0
Support for geared motors 37mm diameter
Topics: Parts, 37mm_DC_motor, stl, Motor, gearbox, thingiverse
0
0.0
Jan 5, 2021
01/21
by
Carlos Bastos (cadu_bastos_)
data
eye 0
favorite 0
comment 0
N20 Motor Wheel Material: PLA Diameter: 60mm Tire: All rings sewer connection 50mm
Topics: robotic, motor, n20 motor wheel, robotics, stl, N20, DC_Motor_Wheel, bot wheel, N20_Motor, robot...
0
0.0
Mar 9, 2021
03/21
by
Mattis Männel (SparkyCola)
data
eye 0
favorite 0
comment 0
This is a derivative of [Skimbal's CD-Rom Motor Pump](http://www.thingiverse.com/thing:4881). I added a space for my [Hose Adapter](http://www.thingiverse.com/thing:1494628) which makes it possible to use the pump with almost any hose. My version is as well as Skimbal's designed for a CD-Rom Motor which you can get out of CD and DVD-drives. They are usually 6V DC motors, however I used 7.2V in the [Video](https://youtu.be/dfkVl3e83C4) (not recommended for long running times). I also played a...
Topics: motor, water, stl, thingiverse, waterpump, water_pump, pump, watering, DIY, dc_motor, diy, Fluid,...
0
0.0
Jan 3, 2021
01/21
by
John Fuller (papajohnfuller)
data
eye 0
favorite 0
comment 0
Hello everyone, available to print is a simple yet effective DC motor. For optimal RPM's, I would print the armature and shaft as light as possible, 1.2 mm walls and 10% infill. You will need the materials below to build it. For additional support, please use the following video link: https://www.youtube.com/watch?v=vz3DLgWqSBY&feature=youtu.be 4.5 - 5 meters of 22 gauge magnetic wire 2 x 22 gauge solid jumper wires stripped back 2-3 cm 2 x M4 counter sink bolts and nuts 32mm or 1.26...
Topics: education, generator, dc motor, motor, stl, 3D Printing, electric, engineering, physcics, science,...
0
0.0
Jan 5, 2021
01/21
by
Long Quang (Longquang)
data
eye 0
favorite 0
comment 0
Bane
Topics: stencil, Bane, stl, batman, dc_motor, 2D Art, thingiverse, dark_knight
0
0.0
Jan 4, 2021
01/21
by
cabuu (cabuu)
data
eye 0
favorite 0
comment 0
My pet dog loves playing with toys especially ones he can chase! I built a robotic ball that switches on and rolls away whenever he interacts with it, notifies me via my mobile phone where I can then take over control and finally powers down when the fun is over to save battery. https://www.youtube.com/watch?v=YORRBN_0tdM The ball uses a d1 mini micro-controller, programmed using Arduino and is put together using some 3D-printed parts and some cheap, readily available components. For this...
Topics: cat, micro-controller, ball, hamster ball, l298n, diy, hamster, dc motor, robot, blynk, d1 mini,...
1
1.0
Jan 12, 2021
01/21
by
Sven Ginka (tswaehn)
data
eye 1
favorite 0
comment 0
This is a small mount for holding a DC Motor Features ------ 2pc 5mm mounting hole 2pcs M3 clamping screw
Topics: dc_motor, thingiverse, stl, mount, holder, DIY, clamp
1
1.0
Jan 18, 2021
01/21
by
jack Riva (Jacz)
data
eye 1
favorite 0
comment 0
I needed a mount for a few motors I had lying around.
Topics: 37mm_DC_motor, 37mm, thingiverse, motor_mount, pololu, Parts, motor, stl
0
0.0
Mar 31, 2021
03/21
by
Junita Ahammed (JAhammed)
data
eye 0
favorite 0
comment 0
Yellow DC Motor Gearbox for reference
Topics: thingiverse, fusion 360, gearbox, Engineering, dc motor, yellow, stl
0
0.0
Mar 5, 2021
03/21
by
Richard Smith (rwsmith123)
data
eye 0
favorite 0
comment 0
The idea for a ball bearing clock was inspired by the "Idle-Tyme Clock " and "Time Machine Clock". However unlike those designs which have a maze of tracks to deliver the balls back to the start mine has a couple of funnels and a spiral. Also unlike those designs where the motor timing is critical for accurate time and the accuracy will degrade as the motor wears, in my design the accuracy is not dependent on the motor speed (once a minute the motor is turned on and the...
Topics: motor, arduino, dc_motor, marble_machine, clock, ball_bearing, marble_run, oled, marble_track,...
0
0.0
Mar 18, 2021
03/21
by
Shiva Prasad (shivackt)
data
eye 0
favorite 0
comment 0
Hello friends We planned a build a rotary tumbler, Y to print all the parts in 3d printing. So we decided to collect the parts which are available in my waste printers robotic parts etc and the results are here. This is simple one and least cost. The motor used 100RPM geared motor and 2 gears. Rods used is 5mm and bearing is 626zz which is fixed to a 3D printed holder. The bearing required is 4 nos and bearing housing is also 4 nos screws for fixing motor and bearing holder. The rubber material...
Topics: speed controller, robot, gears, 3D Printer Accessories, Ender_3, dc_motor, anet, motor, 3dprinter,...
0
0.0
Apr 13, 2021
04/21
by
Masahiro Mizuno (ebaera)
data
eye 0
favorite 0
comment 0
World's Smallest 3D printed Arduino Humanoid Robot. Round control board has Gyro/Accelerometer/Gesture Sensor/4 motor drivers/Charger/8 RGB LEDs/Bluetooth with atmaga328. It shows on "Robot Control Unit" http://www.thingiverse.com/thing:801032 Related Project "Space Vehicles" http://www.thingiverse.com/thing:795088 These Projects are for Maker Faire Bay Area 2015.
Topics: flybot, bluetooth, accelerometer, balancing_robot, tiny, thingiverse, SHURIKEN7, drone, balancing,...
0
0.0
Apr 13, 2021
04/21
by
Bogdan Kirichun (Klasniedryg)
data
eye 0
favorite 0
comment 0
https://www.youtube.com/watch?v=66JXrxeZGUs This is a very simple tool that you can print to show how a dc motor works. I got the idea from Sonic Dad you tube channel. It includes a basic dc motor found in rc cars and other items. Taking the guts out and assembling it in a configuration that you can see the details. You will also need a battery, two paper clips, two safety pins. See instructions...
Topics: thingiverse, dc_motor, how_it_works, stl, motor, rc_motor, Electronics
0
0.0
Mar 17, 2021
03/21
by
Marco Antonio Oliveira da Costa (marcoa131)
data
eye 0
favorite 0
comment 0
I designed this motor into fusion so i could work around it's measurements for a project. It might be useful for using it as a negative for designing things with such a cheap high RPM motor like the BS1.
Topics: motor, Arduino, stl, thingiverse, DC motor, DIY
0
0.0
Mar 20, 2021
03/21
by
erik brandt (415Robots)
data
eye 0
favorite 0
comment 0
This is the motor we'll be using for our sumo bots.
Topics: stl, dc_motor, moto, thingiverse, Other, motor
0
0.0
Mar 13, 2021
03/21
by
Martijn Groenwold (Makertijn)
data
eye 0
favorite 0
comment 0
Motorholder for dc-motor 3-5V Ø24mm with micro-switch-holder. Holder and bracket to be mounted with 2x M3-screw and nut. The micro-switch is kept in place by flatten the two pins with a soldering iron. Scale the STL-files in your slicer-program to 10% for the right size
Topics: stl, thingiverse, Electronics, dc_motor
The behavioral modeling of a separately excited direct current (DC) motor as a prime mover for a doubly-fed induction machine (DFIM) is studied in this thesis. The output torque of the DC motor is computed in the simulation under controlled parameters. The input to the DFIM, used as a doubly-fed induction generator (DFIG), is taken from the DC motor. In theory, the combination of the two machines can be used to emulate various wind patterns and their expected electrical returns for a given...
Topics: Direct Current (DC) Motor, Doubly-fed induction machine (DFIM), Doubly-fed induction generator...
1
1.0
Jan 14, 2021
01/21
by
Ivan Fomichev (codeholic)
data
eye 1
favorite 0
comment 0
A case for a vibration micro motor (similar to Z4TL2B124064X) and a JST-PH 2-pin connector. There is enough space for a capacitor and a diode too. I used a 100 pF ceramic capacitor and a 1N4004 diode.
Topics: dc_motor, thingiverse, stl, motor, DIY, arduino, vibration, casing, case
1
1.0
texts
eye 1
favorite 0
comment 0
Multilevel Inverters offers eminent solutions to high voltage high power applications due to the association of several devices in a series configuration. This is moderate because of getting superior quality voltage waveform when using multilevel inverters as compared to form two-level inverters. Most of the problems raised in this study are the restriction of many switching devices, which can afford high voltage are preferred in the inverter. Here, a novel multilevel inverter topology with no...
Topics: Brushless DC motor, Capacitor voltage source, Multilevel inverter, Total harmonic distortion,...
97
97
Apr 5, 2017
04/17
by
Fathy M. Mustafa
texts
eye 97
favorite 0
comment 0
This paper presents the comparison of dual axis solar tracking system with the fixed solar system. Dual-axis solar tracking system to ensure maximum extraction of energy from the sun, an automatic dual-axis solar tracking system developed using arduino controller based on sun-earth geometrical relationships and two motors (dc motor_linear) with gearbox arrangement on a mechanical structure to move the solar panel so that sun’s beam is able to remain aligned with the solar panel. And four...
Topics: Dual-Axis, Solar Tracking, dc motor, linear motor, optical sensors and Arduino, ijaet
5
5.0
texts
eye 5
favorite 0
comment 0
This paper presents a new Piecewise Affine Proportional-Integral (PA-PI) controller for angular velocity tracking of a buck converter generated DC motor. A Safe Experimentation Dynamics (SED) algorithm is employed as a data-driven optimization tool to find the optimal PA-PI controller parameters such that the integral square of error and input are reduced. The essential feature of the PA-PI controller is that the parameters of proportional and integral gains are adaptive to the error variations...
Topics: Piecewise Affine Proportional-Integral, Buck converter DC motor, Safe Experimentation Dynamics (SED)
