3
3.0
Apr 5, 2021
04/21
by
luis pena (lrpena)
data
eye 3
favorite 0
comment 0
Flag pole kit. using Home Depot T-mop as pole.
Topics: thingiverse, Household, flag, stl, Flag pole, flag ring, flag topper, Flag Pole Fennel, Flag kit
US Flag
Topics: flag, USA, US Flag
8
8.0
Dec 28, 2019
12/19
by
Nelson, Robin
texts
eye 8
favorite 0
comment 0
23 pages : 18 cm
Topics: Flag Day -- Juvenile literature, Flag day, Flag Day
Source: removedNEL
6
6.0
Mar 9, 2021
03/21
by
Richard Reigens (LiLRichy)
data
eye 6
favorite 0
comment 0
This is a mount for small yard flags with the wooden poles. You can mount it with 3 zip ties or 2 screws. The screw holes are recessed in so the screw head will fit in and still hold the mount to a wall. The hole for the flag is curved at the bottom to make a tight fit. When mounted on the wall the flag will be stuck out at an angle.
Topics: Flags, flag, stl, thingiverse, American_Flag, small flag, Flag_Holder, flag_pole, flagpole, Outdoor...
9
9.0
Apr 28, 2021
04/21
by
DMITRY KULESHOV (kdvmgn)
data
eye 9
favorite 0
comment 0
Flag stand for flags with 5 mm diameter holes
Topics: thingiverse, flag_stand, flag, stl, Flag_Holder, Office
3
3.0
May 1, 2021
05/21
by
Nate Fincher (Irontoad)
data
eye 3
favorite 0
comment 0
This is a flag holder that I use at school with small but strong magnets glued to the bottom. It should fit almost flush with five or so small magnets. Double sided adhesive could be used as well. and maybe sticky tac. Pic coming soon.
Topics: stl, Flag_Holder, American_Flag, flag, Office, thingiverse
4
4.0
Apr 27, 2021
04/21
by
(Pampinho)
data
eye 4
favorite 0
comment 0
#Update I beefed it up a bit and also changed the tilt so it stands higher. #Description My flagpole bracket was pretty flimsy so I came up with this one instead. I had downloaded one, but the screw hole was behind the pole receptacle and there was no way to drive the screw in so I fixed that. I've printed it using PETG with 15% infill and 5 walls.
Topics: thingiverse, American_Flag, flag, stl, flagpole, Flag_Holder, 3D Printing, flag_pole
3
3.0
Apr 4, 2021
04/21
by
Roboteer EU (Roboteer_EU)
data
eye 3
favorite 0
comment 0
This is still a work in procces. THIS ONE IS WORKING https://www.thingiverse.com/thing:4301087 https://www.youtube.com/watch?v=6xYjxmSOjZI Attempt 2 to solve one of the world problems. Problem: Flag spins around flagpole. Solution: Anti Flag turning system 1.0 Flag pole diameter from 25 mm to 30 mm 3d printed parts M3 bolts and nuts in the clamps 6mm stainless steel ball
Topics: thingiverse, flag_stand, flag, stl, Outdoor & Garden, Flag_Holder, flagpole, Flag_Ring
4
4.0
Jan 7, 2021
01/21
by
Joseph Bejm (joebejm)
data
eye 4
favorite 0
comment 0
Flag Pole made from 3/4 (26.75mm) PVC Pipe. Included are pictures for Information on mounting and put it together.
Topics: stl, Flag_Holder, Decor, thingiverse, flag_pole, Flag
This book written by Pura V. Kalaw contains history of the Filipino flag, different revolutionary flags, and the first Filipino National flag. Also, the book contains information on Flag Law, Flag of the Commonwealth, the use of the Filipino flag during the Japanese time.
Topic: Flag
10
10.0
Jan 18, 2021
01/21
by
Timothy Offermans (timothyoffermans)
data
eye 10
favorite 0
comment 0
This is a small flag holder for flags with a diameter of around 10 MM (1cm). Also, a "medium" 3M Command Strip will fit on the back of this perfectly in case you don't want to drill holes in your wall or whatever the surface may be. It's one of those flags that you can get from Walmart/Target/etc for 50 cents or a dollar.
Topics: Flag, thingiverse, Small flag, Flag Holder, US Flag, 3D Printing, stl, Holder
8
8.0
Apr 18, 2021
04/21
by
Karl Brown (NAK3DDesigns)
data
eye 8
favorite 0
comment 0
Created this 3D Flag for Independence Day.. Its designed so that it can be printed in 3 colors. Print in color order Blue, White, Red and switch colors in 5mm intervals.
Topics: FLAG, American_Flag, thingiverse, stl, Art, US_flag, USA
3
3.0
Apr 5, 2021
04/21
by
someone someone (PSomeone)
data
eye 3
favorite 0
comment 0
US FLAG STENCIL, FACE MASKS FACE MASKS ARE REQUIRED SHOW A LITTLE AMERICAN PRIDE ADD A FLAG TO IT. NOTE STARS ARE SMALL AND REQUIRE A FINE TIP (CAN BE DRILLED OUT IF NEEDED FOR LARGER TIPS Stencil can be used for many other things. Size it up to make larger versions can be used for t-shirts all kinds of stuff. Larger version and little spray paint is pretty cool. Just dust it on a t-shirt. Post your ideas for the rest of us to try
Topics: thingiverse, Fashion, STENCIL, American_Flag, stl, FLAG, US_FLAG
8
8.0
Jan 19, 2021
01/21
by
Angelo Reyes (angeloreyes27)
data
eye 8
favorite 0
comment 0
Flag pole design for fishing boat
Topics: flag, Automotive, thingiverse, Flag_Holder, pole, flag pole, stl
9
9.0
Apr 26, 2021
04/21
by
Craig Jameson (craigj)
data
eye 9
favorite 0
comment 0
Replacement flag pole fennel (top) for a household pole that holds a 4ft x 2.5ft flag. When printed at 100% scale the inner diameter is about 25mm I would suggest scaling up or down a bit if your pole diameter is significantly different. The old wood fennel on our pole rotted and fell apart the pole itself was fine so rather than buying a new pole I modeled and printed a replacement fennel it's not a perfect replica but it's close enough to get the job done :) If you want to make adjustments...
Topics: flag_pole_tip, thingiverse, American_Flag, flag, stl, flagpole, 3D Printing, flag_pole
3
3.0
Apr 4, 2021
04/21
by
Paolo A (alberpao)
data
eye 3
favorite 0
comment 0
Robust flag pole support for a 22 mm diameter pole. I use to fix it to a balcony marble of 30 mm thickness. I attach also the STP files so you can easily measure and eventually personalize it to your needs
Topics: thingiverse, flag_pole, flag, stl, Outdoor & Garden, Flag_Holder
8
8.0
Jan 16, 2021
01/21
by
Yong Guk Kang (Koog)
data
eye 8
favorite 0
comment 0
inner diameter : ~25mm hole distance : ~50mm angle : 45 deg
Topics: flag, Household Supplies, flag_holder, flag_mount, thingiverse, stl
4
4.0
Mar 9, 2021
03/21
by
Nial Murray (OldGaf)
data
eye 4
favorite 0
comment 0
This is a stand for my Articulating Flags so they don't fall over so easily :) Articulating Scottish Flag: https://www.thingiverse.com/thing:3277093 Articulating Canada Flag https://www.thingiverse.com/thing:3191412 Say thanks by giving OldGaf a tip and help them continue to share amazing Things with the Thingiverse community.
Topics: flag, oldgaf, stl, thingiverse, Flag_Holder, Articulating Flag, Decor
6
6.0
Jan 21, 2021
01/21
by
Daniel Stasiak (dstasiak)
data
eye 6
favorite 0
comment 0
I needed to mount my Flag Pole on a corner and created this mount. The pole is just a standard dowel you can get at any Home Depot. I also created a tip to put on the end of the dowel.
Topics: Decor, thingiverse, Flag_Holder, American_Flag, flag_pole, stl, flagpole
6
6.0
Apr 12, 2021
04/21
by
Scott Hatfield (Scotthatfield)
data
eye 6
favorite 0
comment 0
A flag holder that hooks over the bulletin board
Topics: thingiverse, flag, USA, school, american_flag, stl, Organization, flag_holder
5
5.0
May 1, 2021
05/21
by
Dont Taze (DontTazeYourself)
data
eye 5
favorite 0
comment 0
A stand for holding up to 39 mini flags. I printed at .3mm with 50% infill at got very good results
Topics: stl, Flag_Holder, flag, thingiverse, Other
4
4.0
Apr 16, 2021
04/21
by
(redbeardmathpirate)
data
eye 4
favorite 0
comment 0
Printable stand for a 4x6 stick flag.
Topics: flag, thingiverse, Decor, stl, flag_stand
3
3.0
Jun 7, 2021
06/21
by
NAT RAJ (NATRAJ9317)
data
eye 3
favorite 0
comment 0
Designed in Catia
Topics: india, indian national flag, indian, Buildings & Structures, thingiverse, flag, national flag,...
3
3.0
Apr 8, 2021
04/21
by
Sebastien Van Der Velden (iroNLionX)
data
eye 3
favorite 0
comment 0
24mm flag holder 45. angle
Topics: Flag_Holder, Flag, Household, stl, thingiverse
3
3.0
Apr 5, 2021
04/21
by
Steve Jones (SteveJonesHythe)
data
eye 3
favorite 0
comment 0
Simple flag pole bucket for scouts etc when carrying a unit/group flag on parade. Requires a steel ring (like a large key-ring) and a strap (I sued one from an old bag).
Topics: thingiverse, flag, Accessories, stl, Flag_Holder
5
5.0
Mar 5, 2021
03/21
by
Cody Armstrong (plugnplay101)
data
eye 5
favorite 0
comment 0
This is a black and white USA patch I designed for my dogs new tactical style k9 harness. It turned out perfect. Just print this thin design, apply some adhesive Velcro tape to the back and you're ready to go!
Topics: dog, stl, doggy, Animals, American_Flag, flag, flagpole, USA_flag, thingiverse
4
4.0
Mar 13, 2021
03/21
by
Roboteer EU (Roboteer_EU)
data
eye 4
favorite 0
comment 0
Anti-flag wrapping system 1.2. by Tjalling Tip 1: don’t put the flag to tight. Tip 2: Make sure the rope at the bottom of the flag cannot get stuck. The easy way to do this is make a loop in the rope. I will post a photo of this later. Tip 1: zet de vlag niet te strak vast. Tip 2: Zorg ervoor dat het touw onderaan de vlag niet vast kan komen te zitten. De gemakkelijks manier om dit te doen is door een lus in het touw te maken. Ik zal hier een foto van plaatsen. With these parts you give the...
Topics: thingiverse, flag, Flag_Holder, Flag_Pole_Ring, flagpole, stl, Outdoor & Garden
9
9.0
Jan 14, 2021
01/21
by
Mike Gaffney (gaffo)
data
eye 9
favorite 0
comment 0
Clips for holding a flag to a pole or a rope
Topics: thingiverse, flag, stl, flagpole, clip, Flag_Holder, flag_clip, Outdoor & Garden
8
8.0
Jan 16, 2021
01/21
by
Chris Glaze (cglaze2005)
data
eye 8
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kmWiOtUADm8 This flag pole ring was designed as a replacement ring for a standard outdoor flag pole. This ring sits at the top of the pole and the flag clips onto this ring.
Topics: Flag Ring, thingiverse, Flag Pole, Flag Pole Ring, 3D Printing, stl
Flag Day June 11, 2006 celebrated in Dunne Park, Hollister, California
Topics: Flag Day 2006, Flag Day, Flag Day Celebration, CMAP, cmap_tv
5
5.0
Mar 19, 2021
03/21
by
M. Dean Jones (mdeanjones)
data
eye 5
favorite 0
comment 0
What is a Microphone Flag? When you see TV reporters walking around in the field and they have those little logo boxes on their microphones...those are mic flags. This project will allow you to print all the pieces to make a mic flag (minus the foam inserts you'll need to buy/make) for yourself.
Topics: microphone_flag, audio, Audio, flag, thingiverse, mic_flag, microphone, mic, stl
4
4.0
Mar 5, 2021
03/21
by
Jordan Ouellet (jordouellet)
data
eye 4
favorite 0
comment 0
Here are 2 bases (holder) for flags. External dimensions are 200 x 200 mm. Internal hole size is 28.5 mm. 2 models are available: -Lightweight -Heavy duty
Topics: stl, Flag_Holder, Hobby, tube, base, flag, flagpole, flag_pole, thingiverse
9
9.0
Apr 24, 2021
04/21
by
fay az (fay)
data
eye 9
favorite 0
comment 0
US, USA, American Flag Utility desktop Box
Topics: 3D Printing, Flag desktop Box, stl, US Flag Box, American Flag Box, thingiverse, USA Flag Box
Black Flag, Volume 6, Number 4, September 1980
Topic: Black Flag
Black Flag, Volume 6, Number 11, May 1982
Topic: Black Flag
Black Flag, Volume 6, Number 7, April 1981
Topic: Black Flag
BLACK FLAG
Topic: black flag
Flag
Topics: drawing, flag
Infographic on how to fold the Philippine National Flag
Topics: infographics, flag
1,700
1.7K
Jul 18, 2007
07/07
by
Schauffler, Robert Haven, 1879-1964
texts
eye 1,700
favorite 3
comment 0
225 p. ; 19 cm
Topic: Flag Day
766
766
Jun 1, 2015
06/15
by
MILOCAMPO
audio
eye 766
favorite 1
comment 0
FLAG : KEITH MORRIS : vocals CHUCK "The Duke" Dukowski : bass DEZ CADENA : guitar/vocals BILL STEVENSON : drums STEPHEN EGERTON :guitar May 27th, 2013 Las Vegas,NV. PUNK ROCK BOWLING & MUSIC FESTIVAL 01. intro 02. Revenge 03. Fix Me 04. Police Story 05. Don't Care 06. Depression 07. I've Had It! 08. No Values 09. My War 10. No More 11. Gimmie Gimmie Gimmie 12. White Minority 13. Jealous Again 14. Wasted 15. Clocked In 16. Nervous Breakdown 17. American Waste 18. Thirsty &...
Topics: milocampo, FLAG
Flag in the clouds.
Topics: flag, clouds
Black Flag, Volume 6, Number 2, June 1980
Topic: Black Flag
INFOGRAPHIC: How to fold the Philippine Flag (english)
Topics: infographics, flag
Black Flag, Volume 3, Number 7, December 1973
Topic: Black Flag
Black Flag, Volume 4, Number 10, September 1976
Topic: Black Flag
Black Flag, Volume 6, Number 9, November 1981
Topic: Black Flag