0
0.0
Jan 17, 2021
01/21
by
Markus Kruse (Terrain4Print)
data
eye 0
favorite 0
comment 0
The TA-12 is now divided into parts. Each part will be quicker to print and does not need a big print bed. Also, it has seats for your troops and the hatch can be opened. Some notes for printing this. The front hull needs support. The The hatch has built in support but could use a large brim, this depends on how good your prints stick to the bed. I have added two rare earth magnets to keep the hatch shut. Drill out holes and fit them, before painting. Video presentation ---...
Topics: Terrain, 40k, wargames, starship, miniwargaming, thingiverse, starwars, warhammer, wargaming,...
0
0.0
Jan 18, 2021
01/21
by
Markus Kruse (Terrain4Print)
data
eye 0
favorite 0
comment 0
Produced with the awesome support from my Patrons! This is a set of modular pieces that expands my Tikal temple ground series. It can be used for both fantasy and sci-fi settings. This set contains concave and convex walls, as well as pieces smaller than the standard. Each piece has two variations. Each piece can be put together with others using the supplied clip. At the board edge you can end with the regular straight pieces or the diagonal (see picture #8). I print these with 5% infill....
Topics: Terrain, temple, wargame, building, miniwargaming, miniatures, thingiverse, Frostgrave, wargaming,...
0
0.0
Mar 21, 2021
03/21
by
Eli Green (eliahu77)
data
eye 0
favorite 0
comment 0
A support weapon base and cannon for your pointy eared space elves from the distant reaches of the galaxy.
Topics: wargaming, stl, warhammer40k, Games, 40k, gaming, Eldar, warhammer_40k, miniwargaming, thingiverse
1
1.0
Jan 8, 2021
01/21
by
Jay Mulligan (JayMull420)
data
eye 1
favorite 0
comment 0
Some Ork style scrap bits that I threw together for terrain pieces. I used Ork Tribe Icons from Sebtheis, Ork Symbols from Kombatunit, and Screw and Nut by YSoft_be3D for some of these pieces, I couldn't have done it without them. Resize to fit your needs, what you see in the pictures is what you get in the zip. I hope someone can make use of them. Enjoy !
Topics: ork scrap, Bitz, ork, warhammer, 40k, WH40K, warhammer40k, tabletop_gaming, wargaming, tabletop,...
0
0.0
Mar 12, 2021
03/21
by
Dawid Kępa (Shingen25)
data
eye 0
favorite 0
comment 0
This is my take on SF corridor. I’ve designed it to meet following criteria: - all components have to be 3d printed, - printing time has to be manageable (there are tons of free and commercial designs of the corridors which take hours to print 4” module), - it has to allow building corridors and rooms of any sizes, - it has to allow to build curved corridors, - it has to be easy to paint, - it has to take as little storage space as possible (that is my second greatest complain about all...
Topics: thingiverse, wargame_terrain, wargaming_terrain, wargaming, wargame, miniwargaming, wargames, Toys...
0
0.0
Mar 25, 2021
03/21
by
Aaron Jenkins (Projectwargaming)
data
eye 0
favorite 0
comment 0
I redesigned my earlier fence and was able to make the print more stable without loosing the warn and rugged look.
Topics: stl, acw_wargaming, thingiverse, 6mm, 6mm wargaming, wargaming_scenery, ACW, wargaming_terrain, Toy...
1
1.0
Jan 10, 2021
01/21
by
Mike Hershey (mrhers2)
data
eye 1
favorite 0
comment 0
Some lady friends of mine wanted Disney themed princesses for their DnD game so I figured I'd start with Pocahontas. I started with stockto's "Female Knight" as a base frame (I'm still new to Sculptris and MeshMixer so I needed a good starting point) and did some heavy editing. This is my first mini I've done outside of TinkerCad so I would really appreciate critiques (good and bad!), advice, or even just a general "you're on the right track!" I also designed it so that it...
Topics: Warrior, raccoon, 28mm_miniature, miniwargaming, Indian, Pocahontas, tabletop_games, Tabletop_Game,...
0
0.0
Mar 10, 2021
03/21
by
comPVter (comPVter)
data
eye 0
favorite 0
comment 0
This is another set of pieces that fit with the regular Modular gaming hill by Terrain4Print. Same holes for magnets and clips as the original ones. With these new pieces is possible to build even larger and strange shape hills.
Topics: wargames, scatter_terrain, stl, thingiverse, wargaming_terrain, wargaming, Buildings &...
0
0.0
Mar 15, 2021
03/21
by
Jay Mulligan (JayMull420)
data
eye 0
favorite 0
comment 0
I made a Renegade Dreadnought armed with Dual Chainblades for my Chaos boys. I used the following to make this, all credit goes to these creators, I couldn't have done it without them. Greek style Chaos symbol extrusion by Kresty Horny parts for Morally Ambiguous Robot by MrRobo Chaos Warrior Upgrade Kit by Codewalrus IronClad Mech by VidovicArts I love me some Dreads and wanted to share him with you. Enjoy !
Topics: tabletop_gaming, thingiverse, miniwargaming, Warhammer_40000, 40k_warhammer, chaos, stl,...
0
0.0
Jan 16, 2021
01/21
by
mark sawyer (marcusmole)
data
eye 0
favorite 0
comment 0
In addition to the Jutland ships here are some that weren't there but would be uesful for other WW1 Battles HMS Monmouth/ sunk at Coronel HMS Good Hope sunk at Coronel SMS Blucher (sunk at Dogger bank) HMS Argus the Worlds first Aircraft Carrier commissioned just at wars end SMS Scharhorst/Gneisenau sunk at Falkland Isles HMS Canopus present at Falkland Single engine Scout plane token Single engine bomber token After lots of editing the turrets should now be fixed, all the fixed files have 02...
Topics: Sea battles, cruiser, MINIATURE, jutland, naval, stl, wargame, thingiverse, wargaming, royal_navy,...
0
0.0
Jan 21, 2021
01/21
by
Foba (Foba)
data
eye 0
favorite 0
comment 0
-.--.--..--.-..-.-.-.-. Updated the armor and helmet, which would not print. Left the original files, if anyone wants them. For printing I recommend the files with "2" in their name. --.--.--.--.--.--.-- So you want a Roman Legion on your tabletop? Well look no further! Presenting you the peak of Roman martial arts, the juggernaut that beat stinking barbarians, posh Greeks and thrifty Carthaginians. These will kick asinus and take nomines. 11 roman legionnaires in different poses, 4...
Topics: sword, sword man, swordman, legion, stl, sword men, dnd_miniature, legionnair, thingiverse,...
0
0.0
Mar 10, 2021
03/21
by
Arian Croft (dutchmogul)
data
eye 0
favorite 0
comment 0
This character was designed for our sci-fantasy tabletop RPG, [Wayfarer: Things Beyond Wonder](http://www.illgottengames.net/wayfarer/) and for our modular wargaming system, [Wayfarer Tactics](http://www.illgottengames.net/products/second-edition-wayfarer-tactics) (now in Second Edition!). If you want to print a 28mm scale version, just scale it up by 180%. We've set up a [Patreon page](https://www.patreon.com/illgottengames) for anyone who's interested in helping to fund us so we can keep...
Topics: thingiverse, tabletop, roleplaying, wargaming, miniwargaming, Toys & Games, wargame, wargames,...
0
0.0
Jan 6, 2021
01/21
by
Bell Forged (BellForged)
data
eye 0
favorite 0
comment 0
The Immortal Warrior - Challenge Print No one knows what species this thing once was. All that is known is that its immortal remains continue to carve a path of destruction wherever it wanders. Was it some barbaric experiment or a creature lost to annals of time? This is a crazy design that is probably not totally practical when it comes to 3D printing; that being said I know there are some talented people out there that can probably get some nice prints. Please share your makes! Artist: Isaac...
Topics: D&D, DND, Creatures, stl, fantasy, wargaming_miniature, miniature, miniwargaming, thingiverse,...
0
0.0
Jan 6, 2021
01/21
by
Kirby Franklin (gloomforge_)
data
eye 0
favorite 0
comment 0
Custom Vote Token for Gaslands.
Topics: 3D Printing, stl, gaslands_token, tabletop games, wargames, gaslands, miniwargaming, thingiverse,...
0
0.0
Jan 15, 2021
01/21
by
Joshua A.E Dyer (Hedron_Manufacturing_Inc)
data
eye 0
favorite 0
comment 0
A prototype oscillating turret design based off the T57 and AMX 13 90. This variant is being tested with the Hell-hammer's chassis. I know this may not appeal like my others, but it was a fun little challenge! Remember, I do not know lore so please don't crucify me with a codex or something. I just like the designs. If you print one of these let me know! I love to see how they come out and how they look painted! Instructions: 1. Assemble base (Glue tracks to tank) 2.Place the lock around the...
Topics: miniature, 40k, thingiverse, minatre, stl, war, imperial_guard, miniwargaming, wh40k, warhammer,...
2
2.0
Jan 10, 2021
01/21
by
Mike Hershey (mrhers2)
data
eye 2
favorite 0
comment 0
I'm running a western DnD game so I needed a fancy sheriff. This model is scaled for 28mm use. Feel free to check out my other western DnD things: Western Town: http://www.thingiverse.com/thing:2109260 Marshall the Marshal: http://www.thingiverse.com/thing:2115531 Bounty Hunter: http://www.thingiverse.com/thing:2106579 I also have cannons, horses and all kinds of other fun thing files so please check out the rest of my designs!
Topics: west, 28mm_miniature, miniwargaming, western, 28mm_base, thingiverse, Games, wild_west, wargame,...
0
0.0
Jan 16, 2021
01/21
by
Markus Kruse (Terrain4Print)
data
eye 0
favorite 0
comment 0
Update 2017-11-26 === The floor for the tower was missing. It got uploaded. Support me on Patreon === To help me deliver quality printable terrain models: [ ](https://www.patreon.com/terrain4print) About the buildings === Here are six sci-fi buildings with a desert theme, mixing high tech and low tech. All but the tower are printed in one piece, with built in support if it is needed. They are mostly hollow. So turn off support when printing. .2 is usually good enough. Photos of the last house I...
Topics: Terrain, 40k, wargames, warhammer40k, Buildings, wargame, warhammer_40k, miniwargaming, Legion,...
0
0.0
Jan 17, 2021
01/21
by
Joshua A.E Dyer (Hedron_Manufacturing_Inc)
data
eye 0
favorite 0
comment 0
A fan made version of a Warhammer 40k light tank destroyer. Please note, I do not play the game. I simply enjoy the art style of these models and enjoy building/painting them. Note: Like the others, this one is smaller than a rhino. If someone ever builds one of these, please let me know. I would love to see any paints or custom things added to it. Don't forget, If you can not print one of these you can order them through thingieverse's apps. I will not get paid for this, but seeing makes is...
Topics: Models, 40k_warhammer, wargame, warhammer_terrain, warhammer_40k, War, warhammer_40_k, stl, hammer,...
0
0.0
Jan 6, 2021
01/21
by
Kirby Franklin (gloomforge_)
data
eye 0
favorite 0
comment 0
A set of life counters, modeled off of Warcry's token set, but useable for any game that requires a health count. Skulls are optional but add flavor.
Topics: Roleplaying, dungeons_and_dragons, 3D Printing, Age_of_sigmar, stl, warcry, warhammer,...
0
0.0
Jan 18, 2021
01/21
by
(theolind)
data
eye 0
favorite 0
comment 0
Swedish CV9040A / Stridsfordon 9040A. For wargaming. Scale 1:200. Will probably add the following to this (in the order listed): - CV9040B turret - CV9040C hull and turret - Mortar turret - AA turret
Topics: wargame, miniwargaming, thingiverse, 1:200, tank, Toys & Games, wargaming, stl
0
0.0
Jan 15, 2021
01/21
by
Randall Baughman (rvaughman)
data
eye 0
favorite 0
comment 0
A nice bunker for War Gaming
Topics: warhammer_terrain, thingiverse, stl, warhammer40k, Toys & Games, Warhammer_40000,...
0
0.0
Jan 16, 2021
01/21
by
mark sawyer (marcusmole)
data
eye 0
favorite 0
comment 0
Long term project, but since visiting Belfast and going aboard HMS Caroline, I am inspired to start work on WW1 ships. They are modelled in 1/5000 (i.e. battleships will come out about 30mm long) so not too much detail. After lots of editing the turrets should now be fixed, all the fixed files have 02 (2nd version) after the filename. Happy printing and gaming. I am going to play test the rules & publish soon. See the following for the other ships https://www.thingiverse.com/thing:2543025...
Topics: wargames, jutland, Dreadnought, naval, stl, wargamming, Iron duke, wargame, thingiverse, wargaming,...
1
1.0
Jan 5, 2021
01/21
by
David Burbridge (Cerberus_Designs)
data
eye 1
favorite 0
comment 0
Underground bunker table top terrain piece. Can be scaled to meet your needs. Designed for use with 6mm -8mm gaming. have fun
Topics: 3D Printing, battletech_building, 6mm, stl, miniature, miniwargaming, thingiverse, wargaming,...
0
0.0
Mar 19, 2021
03/21
by
Dawid Kępa (Shingen25)
data
eye 0
favorite 0
comment 0
This is a set of simple miniature bases in sizes used in Infinity the Game (25, 40 and 55 mm). They have magnet slots underneath (for 5x1 and 3x1 mm magnets) and marks determining firing arcs on their sides.
Topics: infinity_the_game, Toy & Game Accessories, wargames, wargame_terrain, wargaming, wargame,...
0
0.0
Jan 5, 2021
01/21
by
Yann Indriliunas (Stratation)
data
eye 0
favorite 0
comment 0
Promotion!! To celebrate the release of our "Lost in the Swamp" Kickstarter, here is another free bonus! Oak Barrel. 28 mm scale. Perfect for your tabletop roleplaying games. Don't forget to have a look at our Kickstarter page to learn more about the "Lost in the Swamp" project: https://www.kickstarter.com/projects/stratationdesign3d/lost-in-the-swamp-3d-printable-game-terrain-and-creatures We also invite you to visit the Stratation Design 3D Patreon page to support us and...
Topics: Dungeon, dnd, 3dprint, dnd_mini, diy, tabletop_rpg, dungeons_and_dragons, 3D_printing, wargames,...
0
0.0
Jan 9, 2021
01/21
by
Seth Lizama (SaipanFoxBird)
data
eye 0
favorite 0
comment 0
CREDIT: alphaflight83 DrGore ================================ My first post to this site. This was a project I undertook to make shoulder pads for my Thunder Warrior conversions, since the intended pauldrons are no longer in production. If anyone would like to try these out, please print them out and post the pictures! I'd love to see how they turned out and what settings would be best! Nomad Iron Warrior by BREXIT as the model
Topics: miniwargaming, WH40K, thingiverse, tabletop_wargaming, wargaming, miniatures, 40k, stl,...
0
0.0
Jan 18, 2021
01/21
by
Arian Croft (dutchmogul)
data
eye 0
favorite 0
comment 0
[KICKSTARTER ALERT!](https://www.kickstarter.com/projects/292543184/scatterblocks)[](https://www.youtube.com/watch?v=hofFm7TAUOw) We're currently running a Kickstarter campaign for the [extended range of our ScatterBlocks](https://www.kickstarter.com/projects/292543184/scatterblocks) (quick-assembling miniature terrain), so drop on by and drop us a pledge if you want the full range. For those of you supporting us (or thinking about supporting us) on...
Topics: miniature_28mm, wargames, scatter, warhammer40k, demonic, daemon, wayfarer, mordheim, warhammer,...
2
2.0
Jan 12, 2021
01/21
by
Neil Wyatt (StubMandrel)
data
eye 2
favorite 0
comment 0
A timeless little cottage in two parts to suit n-scale model railways or 1:144 or 15mm wargaming.
Topics: model_railway, thingiverse, n-scale, stl, cottage, miniwargaming, bungalow, model_railroad,...
0
0.0
Apr 2, 2021
04/21
by
Giando Sigurani (Giandroid)
data
eye 0
favorite 0
comment 0
Before the Shy King ordered his forces take a break from conquering the galaxy and have a long, deserving nap, a few of the more financially prudent Space Zombies had an idea. Their financial backgrounds varied widely: some made their fortunes through savvy real estate decisions, others in trades of precious stones, and still others through means ones would be hard-pressed to classify as *legal*, or even *sane*. But despite their differences, they all agreed that it wouldn't do them any good if...
Topics: flayed_ones, miniwargaming, cash, science_fiction, Space Zombies, Toys & Games, money,...
0
0.0
Jan 20, 2021
01/21
by
(sablebadger)
data
eye 0
favorite 0
comment 0
Help support my work on these models by supporting me on Patreon! I make models for lots of different games every month and supporters will get early access, and input into future models. https://www.patreon.com/sablebadger Gaslands is a tabletop game of post-apocalyptic vehicular mayhem. With fast and cinematic rules, it is designed to be played with toy cars, allowing players to ram, skid and race their way through the wreckage of a burnt-out Earth. I needed some crashable fencing to put...
Topics: wargames, Gaslands, stl, terrain_model, wargame, thingiverse, Toys & Games, wargaming,...
0
0.0
Jan 21, 2021
01/21
by
(sablebadger)
data
eye 0
favorite 0
comment 0
NEWS: I have started a Patreon by popular demand. https://www.patreon.com/sablebadger Let me know if you have any questions. I have been working on some terrain for Frostgrave, and other skirmish style table top miniatures games. For one of the scenarios in the core book, you needed some teleport circles for the layout. I made these with a pseudo mystical "summoning circle" type feel just for the fun of it. have quite a few models available for wargaming just check below. I put a lot...
Topics: wargames, Teleporter, wargame, miniwargaming, miniatures, wargaming_terrain, thingiverse,...
3
3.0
Jan 14, 2021
01/21
by
Smokalotapotamus (printalotapotamus)
data
eye 3
favorite 0
comment 0
Another modified Planetary Annihilation Commander for printing and painting. Great addition to your 15mm scale army or any wargame you like. Edit: My test print did not come out all that great so I am working on splitting him up for easier printing. Check out [my Blog](http://15mm.42oranges.com) where I talk more about 3D printing and painting wargame models.
Topics: thingiverse, Mecha, stl, wargames, wargame, Toys & Games, mech, miniwargaming, wargaming,...
0
0.0
Apr 9, 2021
04/21
by
balgerion wasarin (Balgerion)
data
eye 0
favorite 0
comment 0
You can add this to Torri gate i designed --> thing:518853
Topics: wargame, stl, miniwargaming, Toy & Game Accessories, thingiverse, wargames, wargaming, 28mm
0
0.0
Apr 7, 2021
04/21
by
Stewart Pope (spope)
data
eye 0
favorite 0
comment 0
Not sure what these lenses are but I've created them to go onto Garin's superb Dreadnought.
Topics: wargame, 40k_warhammer, spacemarines, stl, miniwargaming, spacemarine, thingiverse, wargames,...
0
0.0
Mar 2, 2021
03/21
by
(sablebadger)
data
eye 0
favorite 0
comment 0
NEWS: I have started a Patreon by popular demand. https://www.patreon.com/sablebadger Let me know if you have any questions. When playing skirmish games like Frostgrave, you need a handy dandy measuring tool. I was watching the guys on Guerrilla Miniatures Games youtube channel and they had these cool looking templates that looked handy indeed! So I made one. 7" down the long side 4" down the short side 2"/1" on the ends. Hash marks for 1/4" increments. Center oval is...
Topics: measure, wargaming, Toys & Games, measuring, thingiverse, stl, miniwargaming, wargame,...
0
0.0
Jan 19, 2021
01/21
by
Markus Kruse (Terrain4Print)
data
eye 0
favorite 0
comment 0
Produced with the awesome support from my Patrons! This is two versions of a barbarian tent, one with some decorations on the outside and one without. Use for barbarians of all worlds. The cupola of stitched together hides are held up by wooden beams. I print these with 5% infill. The easiest method of painting them is to give them a light brown coat. Do several layers until it covers. Paint wooden details light gray. Give it a black wash (thinned paint). The tent is now battlefield ready. To...
Topics: Hut, Terrain, wargames, Tribal, building, miniwargaming, savage, thingiverse, Village, tent,...
0
0.0
Mar 9, 2021
03/21
by
James Chaffee (JChaffee84)
data
eye 0
favorite 0
comment 0
Formbyte's K2 Black Panther improved for printing with some additional reactive armor. Scaled to 1:72 for wargaming purposes. I recommend printing the turret on an angle with the barrel facing downward for best results. Turret Infill - 70-75% Hull Infill - 20% Track Infill - 90%
Topics: wargames, South_Korea, Modern_Wargame, stl, thingiverse, South_Korean_Military, tank,...
0
0.0
Apr 8, 2021
04/21
by
Bell Forged (BellForged)
data
eye 0
favorite 0
comment 0
Myra Grotn Warriors are truly strange to behold and frightening to face. They appear almost like a chimeria in someways but are actually natural in their origins. They dwell in the jungle like terrain of their homeworld and occasionally venture to the Vlak Desert to war with the Korva. Korva Warriors: https://www.thingiverse.com/thing:4180516 Korva Mount (Kradvok Hunter): https://www.thingiverse.com/thing:4321490 Vlak Desert Tiles: https://www.thingiverse.com/thing:4337508 Check out our...
Topics: dnd, fantasy, miniature, D&D, dnd_miniature, stl, miniwargaming, dnd_mini, Toy & Game...
1
1.0
Jan 13, 2021
01/21
by
Markus Kruse (Terrain4Print)
data
eye 1
favorite 0
comment 0
Support me on Patreon === To help me deliver quality printable terrain models: [ ](https://www.patreon.com/terrain4print) HAIRY HEDGE =========== A hedge inspired by the hairy lion. Strands of filament reaching out to a frame. Each strand is 1 mm wide and 0.2mm thick. When the frame is cut away, the hedge looks like a toothbrush. Shape the strands with a hairdryer, dip it in PVA (white glue) and cover with flock. Terrain4Print ========== I make printable 3d terrain for wargames and roleplaying...
Topics: thingiverse, stl, hedge, scatter_terrain, miniwargaming, Terrain, warhammer, wargaming, Toy &...
0
0.0
Jan 15, 2021
01/21
by
Chris Ahrendt (celticht32)
data
eye 0
favorite 0
comment 0
Laser Cut files for 15mm Fields of Glory Bases
Topics: thingiverse, Hobby, stl, wargames, miniwargaming, wargaming_bases, wargaming
0
0.0
Mar 17, 2021
03/21
by
Patrick Woodard (R_A_T_)
data
eye 0
favorite 0
comment 0
You're standing lookout on the deck of the Union warship USS Cumberland anchored in Hampton Roads. The cold morning air bites through your coat. Through the fog laying over the bay you see a shape moving, you take it as nothing, seeing things from a late watch. You take a swig of coffee from your canteen to clear your head. Suddenly you see the shape move out of the fog. A great lumbering beast low in the water, black smoke billowing from its smokestack, flying the flag of the Confederacy. You...
Topics: Hampton Roads, confederacy, civil_war, Games, naval, Virginia, stl, miniwargaming, wargames,...
0
0.0
Mar 26, 2021
03/21
by
Tim Rowley (bubbarowley)
data
eye 0
favorite 0
comment 0
I was always asking my opponent to borrow their rings when I played, so I designed and printed my own. They are quick prints and make for good little gifts for anyone that plays the game. Here's the OnShape link: https://cad.onshape.com/documents/a73ff1af69eec856319488ed/w/39f1a983dc47fd209325d939/e/411a2c8a166e1fa7544ecca4 The three dimensions are variables you can easily change if you want a different thickness or height.
Topics: stl, hordes, warmachine, thingiverse, warmahordes, Toy & Game Accessories, miniwargaming,...
0
0.0
Apr 1, 2021
04/21
by
lesley van der veen (Lesley_Van_der_Veen)
data
eye 0
favorite 0
comment 0
Matching 25mm bases to go with the 6"x6" road tiles
Topics: thingiverse, wargaming, miniwargaming, Toy & Game Accessories, base, stl
0
0.0
Mar 18, 2021
03/21
by
Nathan Hunt (barnEbiss2)
data
eye 0
favorite 0
comment 0
Updated Ratty Navy ships and included slot holes for placement of sail flag masts.
Topics: fantasy, wargames, star_wars, wargaming, thingiverse, miniwargaming, naval_wargames, Toy & Game...
0
0.0
Apr 1, 2021
04/21
by
Buck Skolmoski (3dPrintedGamer)
data
eye 0
favorite 0
comment 0
Slightly edited and scaled down for 10mm scale Warmaster. Included 1 model prebased on 40x20. Will require very slight supports on the horns and sword (near the hand guard)
Topics: Games, Great_unclean_one, thingiverse, 10mm, plague, warhammer_fantasy, warhammer_40k, wargaming,...
0
0.0
Jan 16, 2021
01/21
by
Joshua A.E Dyer (Hedron_Manufacturing_Inc)
data
eye 0
favorite 0
comment 0
A fan made version of a Warhammer 40k APC. Please note, I do not play the game, nor do I know the lore. I simply enjoy the art style of these models and enjoy building/painting them. If someone ever builds one of these, please let me know. I would love to see any paints or custom things added to it. Don't forget, If you can not print one of these you can order them through thingieverse's apps. To my knowledge, I will not get paid for this, but seeing makes is enough for me!
Topics: 40k, Models, 40k_warhammer, warhammer_terrain, stl, wh40000, thingiverse, space, warhammer_40k,...
0
0.0
Mar 2, 2021
03/21
by
Foba (Foba)
data
eye 0
favorite 0
comment 0
So the phalanx is too rigid, and the Legion is to disciplined? The answer is the barbarian horde! Featuring the horde of rage and stink, 14 different barbarians in varying degrees of clothing, ready to run over any obstacle, man or meadhall. .-.-..-.-.- Now updated with a new pose, new armor and more! found under files with a ¨2¨. .-.-.--. You want some Barbarian Bowmen with that?: https://www.thingiverse.com/thing:3107249 For some Macedonian Hoplite Action, check These Out!:...
Topics: wargaming, thingiverse, Swordsmen, Gallic, Toy & Game Accessories, spearman, barbarian...
0
0.0
Mar 26, 2021
03/21
by
Steve Smigielski (Ssmigielski)
data
eye 0
favorite 0
comment 0
Working on modifying the flat bed to have a loading plate for a 144 Gundam.
Topics: stl, infinity_the_game, thingiverse, Toy & Game Accessories, miniwargaming, 28mm_miniature,...
0
0.0
Apr 1, 2021
04/21
by
Mad Doctor (01architekt)
data
eye 0
favorite 0
comment 0
40mm City Style Bases. Part of the City Base range of models I have developed for use with my current 40K project. Bases are modeled with a 5 x 2.5mm opening in the bottom to accept a 2 x 5mm magnet. Depending on your first layer you may need to trim around the opening to ensure the magnet can fit. These bases have been successfully printed on a Ultimaker 3. You shouldn’t need to include for supports however reducing infill and top layers adds additional random texture to the surface if you...
Topics: 40mm_Bases, WH40K, thingiverse, wargaming_scenery, warhammer, 40k, warhammer_40k, wargaming_scifi,...
0
0.0
Jan 20, 2021
01/21
by
Rollan Parker (Face_Rollan)
data
eye 0
favorite 0
comment 0
I Remixed the original paint shaker because it did not fit in my Dewalt reciprocating saw and broke. This model has: - A lot more stability due to extra supports; - Longer area between saw housing and bottle holder; - Reaper Paint Attachment - P3 Paint Attachment (added 06/04/18 Untested as i do not have P3 paints) - Gorilla Bottle attachment (added 12/7/19; Untested) - I would be careful with this Gorilla Bottle attachment as the attachment into the saw is the same thickness (based on an...
Topics: warhammer, dewalt, reaper_miniatures, stl, shaker, reaper_paint, dnd_miniature, thingiverse,...
