0
0.0
Jan 17, 2021
01/21
by
dae dae (daedb)
data
eye 0
favorite 0
comment 0
Due to the small form Factor of a 5Ghz Biquad Yagi antenna, it might be useful to just wrap around wire instead of complicately bending. The idea is to wrap while tightening the edges with the edge tool. Then solder the loop closed Lastly tighten middle part with 2nd tool. This needs some improvement overall. I could get a 30% improvement in throughput compared to a standard 5dbi antenna. (My test was against 2 concrete walls. 70 mpbs standard antenna, 100 mbps with yagi=) This is less than I...
Topics: thingiverse, biquad_yagi, YAGI, yagi_antenna, Wifi, Computer, stl, wifi_antenna
2
2.0
Jan 10, 2021
01/21
by
Daniel Rebsdorf (TAz00)
data
eye 2
favorite 0
comment 0
I had the idea to build one of Andrew McNeil's antennas using CNC precision and thicker material than a PCB. I asked him what thickness he would recommend, and he replied 1.5mm. Here are some links to his stuff: Instructables site: http://www.instructables.com/member/andrew%20mcneil/ Youtube Channel: https://www.youtube.com/user/8bitandrewmcneil/ Shop: http://andrew-mcneil.com/ His Patreon: https://www.patreon.com/user?u=2476215 I used his plans to draw up a design which would have a 3D printed...
Topics: thingiverse, antenna, Electronics, stl, biquad_yagi_antenna, biquad_yagi, wifi, 2.4ghz
0
0.0
Jan 4, 2021
01/21
by
Jason Godwin (cockroach_dude)
data
eye 0
favorite 0
comment 0
This is an adapter to put 10mm elements on a 25mm boom. Print in PETG or ABS to use it outside.
Topics: Electronics, stl, yagi_antenna, thingiverse
0
0.0
Jan 13, 2021
01/21
by
galeviel none (galeviel)
data
eye 0
favorite 0
comment 0
This is a printable handle for a yagi antenna. It includes a compass mount, so that the antenna can be used for radio direction finding a.k.a. fox hunts. Furthermore the handle is hollow. thus making it possible to mount on a pole. But be careful what material you are using to print the parts in regards of stability. To connect all pieces I used M4 nuts and M4x8 or M4x10 screws. The antenna is friction fitted by the screws on the bottom of the prints. A compass can be mounted using zip-ties. I...
Topics: thingiverse, amateur_radio, stl, yagi_antenna_mount, DIY
0
0.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
These are some insulators i make for the construction of a Yagi Antenna, these will fit a 25X25mm aluminium boom and are for element sizes 6-8-10mm round bar/tubing, Please see my other things I will be uploading some driven element mounts to suit, I usually centre the tube then retract slightly and use a dab of superglue and re centre.... Thanks 73 Ady M6YPA/2E0ERO
Topics: Electronics, YAGI_INSULATOR, thingiverse, YAGI, yagi_antenna, stl
0
0.0
Jan 6, 2021
01/21
by
Nihat Duran (DURANWORKS)
data
eye 0
favorite 0
comment 0
Perfect DESIGN Mavic mini 2.4GHZ yagi antenna
Topics: R/C Vehicles, stl, yagi_antenna, Mavic_Mini, thingiverse
0
0.0
Jan 18, 2021
01/21
by
Daniel Santiago (rarFood)
data
eye 0
favorite 0
comment 0
I was looking for a simple grip for my Yagi antenna and couldn't find one. I found the design by Bhyde101 and decided to modify it to fit my antenna by adding the top mounting plate and setting the dimensions. Hope some one gets some use out of it just like me.
Topics: thingiverse, Pistol_grip, yagi_antenna, DIY, stl
0
0.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
This is designed to fir a 25x25mm boom using 8mm elements, it has an area for an so239 socket to keep it neat and tidy, look at my other things for different sizes Thanks 73 Ady 2E0ERO
Topics: Electronics, YAGI_INSULATOR, thingiverse, YAGI, yagi_antenna, yagi_antenna_mount, stl
1
1.0
Jan 11, 2021
01/21
by
andre blaauw (Andreb70)
data
eye 1
favorite 0
comment 0
Looks very nice if i my say made it my selve. Did not fully test the antenna.
Topics: YAGI, thingiverse, stl, yagi_antenna_mount, yagi_antenna, DIY, yagi_antenna_holder
1
1.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 1
favorite 0
comment 0
These are some insulators i make for the construction of a Yagi Antenna, these will fit a 15x15mm aluminium boom and are for element sizes 6-10-12mm round bar/tubing, Please see my other things I will be uploading some driven element mounts to suit, I usually centre the tube then retract slightly and use a dab of superglue and re centre.... Thanks 73 Ady M6YPA/2E0ERO
Topics: Ham_Radio, ham_radio_antenna, beam antenna, thingiverse, YAGI, yagi_antenna, DIY, YAGI INSULATOR,...
2
2.0
Jan 8, 2021
01/21
by
Suat Alper Seyhan (aseyhan)
data
eye 2
favorite 0
comment 0
6mm aluminum rods fits nicely to this separator/holder. Also fits nicely in a "mutlusan" branded 85x85 electrical box which is very common in my country. Makes life much easier while making a "DK7ZB" style yagi.
Topics: 3D Printing, stl, yagi_antenna, antenna, thingiverse, Ham_Radio
1
1.0
Jan 18, 2021
01/21
by
Ed Barnes (edbarnes)
data
eye 1
favorite 0
comment 0
I updated the tape parts to better fit together when assembled. Also, the tape tip slide is beefier. I print 100% infill, ABS or PLA, no support. 2/2/2019. The PVC tape measure Yagi-Uda antenna is a common amateur radio project for transmitter hunting. I built these parts to eliminate the PVC joints and hose clamps. You will still need a PVC pipe rod to mount these parts. I added screw holes for the bases so glue isn't required. Long M3 hex machine screws were used to mount the covers. The 6...
Topics: Electronics, Amature_Radio, Ham_Radio, antenna, amateur_radio, thingiverse, yagi_antenna, stl
0
0.0
Jan 3, 2021
01/21
by
Jeremy Carter (ReallyBigTeeth)
data
eye 0
favorite 0
comment 0
If you like what you see here, consider leaving a tip. Use this file is to create a frame for the driven, reflector, and parasitic elements of a biquad yagi of your own specifications. The default values are for a 2.4 GHz antenna with a centre frequency of 2.442 GHz (centre of WiFi channels), but can be made resonant at just about any frequency, with as many elements as you wish. Updates: 2018 Jan 7 Initial upload with basic frame. 2018 Jan 8 Added optional configurable holes for antenna boom....
Topics: radio biquad yagi, yagi antenna fpv, yagi antenna, wifi yagi, biquad design, r/c yagi, fpv antenna,...
0
0.0
Jan 3, 2021
01/21
by
Shura K (Shurak)
data
eye 0
favorite 0
comment 0
This is remix of original antenna. Since I could not find any information on how the yagi was calculated I re-did yagi calculation based on the Nist Technical Note 688 found here https://tf.nist.gov/general/pdf/451.pdf Calculated for 5800 MHz. Page 7 design for 1.2 lambda plus diameter correction applied derived from graphs on page 9. For directors and reflector use1.3 mm wire which can be obtained from stripped AWG 16 household copper wire. Get a 1 ft cut in your local hardware store, costs...
Topics: R/C Vehicles, stl, yagi_antenna, Mavic, Mavic_Mini, thingiverse, YAGI, drone
0
0.0
Jan 5, 2021
01/21
by
Daniele (sgtred70)
data
eye 0
favorite 0
comment 0
Antenne YAGI 2,4 GHz per radiocomando MAVIC MINI. Frequency : 2442 MHz (Model MT1SD25: 2.400 – 2.4835 GHz) Wavelength : 123 mm Rod Diameter : 4 mm Boom Diameter : 4 mm Boom Length : 95 mm d/lambda : 0.033 ( min.: 0.002 , max.: 0.01 ) D/lambda : 0.033 ( min.: 0.01 , max.: 0.05 ) Elements : 5 Gain : 7.99 dBd (approx.) ------------------------------------------------------------- Reflector Length : 59 mm Reflector Position : 0 mm -------------------------------------------------------------...
Topics: R/C Vehicles, stl, yagi_antenna, DJI_MAVIC, Mavic_Mini, thingiverse
0
0.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
This is designed to fir a 25x25mm boom using 10mm elements, it has an area for an so239 socket to keep it neat and tidy, look at my other things for different sizes Thanks 73 Ady 2E0ERO
Topics: Electronics, YAGI_INSULATOR, thingiverse, YAGI, yagi_antenna, yagi_antenna_mount, stl
0
0.0
Jan 8, 2021
01/21
by
muell bin (fakk-asrock)
data
eye 0
favorite 0
comment 0
Quick Remix of Coryt1979s Mavic Mini Antenna for 5.8Ghz band. This one is designed for 2.4 GHz and also uses 3mm directors. Frequency : 2450 MHz Wavelength : 122 mm Rod Diameter : 3 mm Boom Diameter : 4 mm Gain : 9.88 dBd (approx.) Elements : 2x 6 for each boom, length as follows Reflector Length : 59 mm Reflector Position : behind the remote's antenna ------------------------------------------------------------- ------------------------------------------------------------- Director #1 Length :...
Topics: R/C Vehicles, stl, yagi_antenna, DJI_MAVIC, Mavic_Mini, thingiverse
R&D Report 1987-13 : Band II VHF antenna for home construction. S. Wakeling A wideband Band II Yagi antenna, suitable for home construction, has been designed using computer techniques. The antenna is intended for use as a domestic receiving antenna for VHF/FM sound broadcasting at frequencies in the range 88 to 108 MHz. Scale-model antennas were constructed and measured to verify the performance predicted by the computer. Finally, a full-scale Yagi antenna was constructed and its radiation...
Topics: antenna, yagi, dipole, vhf, antennas, ccir, design, impedance, element, folded, single dipole,...
492
492
May 30, 2010
05/10
by
Beck, F. B
texts
eye 492
favorite 0
comment 0
Yagi antenna arraying to achieve negligible interelement coupling and grating-lobe suppression
Topics: ANTENNA ARRAYS, ARRAYS, YAGI ANTENNAS, ANTENNA ARRAY, YAGI ANTENNA
1
1.0
Jan 8, 2021
01/21
by
Suat Alper Seyhan (aseyhan)
data
eye 1
favorite 0
comment 0
can be screwed or superglued on 85*85 electrical box. Snug fit on 25 mm pvc. Can be glued or screwed to pvc for fixing.
Topics: 3D Printing, stl, yagi_antenna, amateur_radio, antenna, thingiverse, Ham_Radio
0
0.0
Mar 3, 2021
03/21
by
Luca Molino (IV3ZNK)
data
eye 0
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/dp8afmMVTsP
Topics: YAGI_INSULATOR, thingiverse, yagi_antenna, stl, Hobby
4
4.0
Jan 10, 2021
01/21
by
Abi Bush (aab60)
data
eye 4
favorite 0
comment 0
These are 3D printed parts to enable quick and easy assembly of a particular duoband Yagi antenna, the design for which can be found [here](http://www.qsl.net/dk7zb/Duoband/duoband_2-70_2-3.htm). The design has been developed in collaboration with the amateur radio league in Nepal. The parts enable the antenna elements to be quickly positioned on the boom without a need to measure out exactly where they should go.
Topics: YAGI, Ham_radio, thingiverse, antenna, stl, yagi_antenna, Gadgets, field_Ready, HumanitarianMakers
As the communication technology is thriving day by day, the number of satellites are shooting up in a faster rate. The use of smaller satellites for Education, Scientific and Commercial purposes are usually positioned in LEO Low Earth Orbit flights and typically their short periods of crossing across the Line Of Sight of an Earth Station brings the need of finding ways of expanding the communication between ground and space segments. This paper elucidates the aspects related to the design and...
Topics: Electronics & Communication Engineering, Yagi antenna, Orbit, LOS, Simulation
0
0.0
Mar 3, 2021
03/21
by
Luca Molino (IV3ZNK)
data
eye 0
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iFH3IYr6Imb
Topics: YAGI_INSULATOR, thingiverse, yagi_antenna, stl, Hobby
