0
0.0
Apr 17, 2021
04/21
by
(charlieray)
data
eye 0
favorite 0
comment 0
Parametric Fusion 360 file included. Adjust to fit your boom diameter as well as element diameter. Change the snap in angle/how much of the boom or element is grabbed by the clip.
Topics: hamradio, yagi_antenna, thingiverse, stl, AMSAT, Electronics, YAGI
5
5.0
Jan 10, 2021
01/21
by
Abi Bush (aab60)
data
eye 5
favorite 0
comment 0
These are 3D printed parts to enable quick and easy assembly of a particular duoband Yagi antenna, the design for which can be found [here](http://www.qsl.net/dk7zb/Duoband/duoband_2-70_2-3.htm). The design has been developed in collaboration with the amateur radio league in Nepal. The parts enable the antenna elements to be quickly positioned on the boom without a need to measure out exactly where they should go.
Topics: YAGI, Ham_radio, thingiverse, antenna, stl, yagi_antenna, Gadgets, field_Ready, HumanitarianMakers
0
0.0
Apr 1, 2021
04/21
by
Alexandr Makeenak (LEXX)
data
eye 0
favorite 0
comment 0
Design goal: create custom part for assembling Yagi antenne. You can print light yagi components. The boom is 25 mm Al pipe but you can use pipes from various materials (this affects only the weight of the structure). Elements are 8 mm Al tube. Reflector for 2m antenna is divided to 2 parts. Is longer than 1m and is connected with screw terminal. For example I assembled yagi 8 + 6 elements 2 / 70cm bands
Topics: antenna, Ham_Radio, thingiverse, ham_radio_antenna, yagi_antenna, YAGI, DIY, stl
0
0.0
Mar 9, 2021
03/21
by
Anthony Girasoli (discsoftron)
data
eye 0
favorite 0
comment 0
These are parts for building a jig for bending a piece of solid copper wire into a folded dipole. Two of the "Folded Dipole Bend" parts need to be printed and one of the "Folded Dipole Brace" needs to be printed. The "bend" part should be spaced apart for the correct length needed. For example, for a 1/2 wave folded dipole on 441MHz, the length from outside bend to outside bend should be 33cm. The parts can be screwed into a piece of wood with drywall screws. A...
Topics: Electronics, amateur_radio, stl, thingiverse, antenna, yagi_antenna
496
496
May 30, 2010
05/10
by
Beck, F. B
texts
eye 496
favorite 0
comment 0
Yagi antenna arraying to achieve negligible interelement coupling and grating-lobe suppression
Topics: ANTENNA ARRAYS, ARRAYS, YAGI ANTENNAS, ANTENNA ARRAY, YAGI ANTENNA
0
0.0
Mar 21, 2021
03/21
by
Blaz Bratus (bbratus)
data
eye 0
favorite 0
comment 0
A customizable 3D printable piece that holds a Yagi Antenna together. This piece provides connection between metal rods that function as a dipole elements and a profile that holds all the rods together. A simple DIY Yagi Antenna design is available here: http://dk7zb.darc.de/Duoband/duoband_2-70_2-3.htm. The .stl files are available for a few dimensions. OpenSCAD source file is also available if you require any other dimension. ## Also needed * any bolt that will connect rod, 3D printed piece...
Topics: stl, yagi, yagi_antenna_holder, antenna, antenna_mount, Electronics, thingiverse,...
0
0.0
Apr 17, 2021
04/21
by
Chris Heerschap (cmh)
data
eye 0
favorite 0
comment 0
A remix of a [remix](https://www.thingiverse.com/thing:744962) inspired by another [remix](https://www.thingiverse.com/thing:20609). ***All I did here was remove the letters from the split version which makes it easier to print***. All the details are available on [photonix's](https://www.thingiverse.com/photonix) [original part](https://www.thingiverse.com/thing:19548/) - copying from the [Instructions](https://www.thingiverse.com/thing:19548#instructions): > Use 0.75 mm² (1 mm diameter)...
Topics: yagi, wifi, copper_rods, extension, yagi_antenn, Electronics, thingiverse, 24_GHz_yagi_antenna,...
3
3.0
Jan 10, 2021
01/21
by
Daniel Rebsdorf (TAz00)
data
eye 3
favorite 0
comment 0
I had the idea to build one of Andrew McNeil's antennas using CNC precision and thicker material than a PCB. I asked him what thickness he would recommend, and he replied 1.5mm. Here are some links to his stuff: Instructables site: http://www.instructables.com/member/andrew%20mcneil/ Youtube Channel: https://www.youtube.com/user/8bitandrewmcneil/ Shop: http://andrew-mcneil.com/ His Patreon: https://www.patreon.com/user?u=2476215 I used his plans to draw up a design which would have a 3D printed...
Topics: thingiverse, antenna, Electronics, stl, biquad_yagi_antenna, biquad_yagi, wifi, 2.4ghz
0
0.0
Jan 18, 2021
01/21
by
Daniel Santiago (rarFood)
data
eye 0
favorite 0
comment 0
I was looking for a simple grip for my Yagi antenna and couldn't find one. I found the design by Bhyde101 and decided to modify it to fit my antenna by adding the top mounting plate and setting the dimensions. Hope some one gets some use out of it just like me.
Topics: thingiverse, Pistol_grip, yagi_antenna, DIY, stl
1
1.0
Jan 5, 2021
01/21
by
Daniele (sgtred70)
data
eye 1
favorite 0
comment 0
Antenne YAGI 2,4 GHz per radiocomando MAVIC MINI. Frequency : 2442 MHz (Model MT1SD25: 2.400 – 2.4835 GHz) Wavelength : 123 mm Rod Diameter : 4 mm Boom Diameter : 4 mm Boom Length : 95 mm d/lambda : 0.033 ( min.: 0.002 , max.: 0.01 ) D/lambda : 0.033 ( min.: 0.01 , max.: 0.05 ) Elements : 5 Gain : 7.99 dBd (approx.) ------------------------------------------------------------- Reflector Length : 59 mm Reflector Position : 0 mm -------------------------------------------------------------...
Topics: R/C Vehicles, stl, yagi_antenna, DJI_MAVIC, Mavic_Mini, thingiverse
0
0.0
Mar 25, 2021
03/21
by
David Hunnisett (mountainpenguin)
data
eye 0
favorite 0
comment 0
This is an easy print and assemble Yagi for EU LoRa frequencies. To assemble see the guide for other parts needed. The measured SWR was 1.74 It was used for a stable Lora connection of 163Km during a [mesh experiment](https://twitter.com/johncassidygb/status/1176239141652172805?s=12)
Topics: stl, yagi_antenna, ariel, 868MHz, thingiverse, uda, 868, radio, Electronics, LoRa, LoRaWAN, YAGI,...
1
1.0
Jan 18, 2021
01/21
by
Ed Barnes (edbarnes)
data
eye 1
favorite 0
comment 0
I updated the tape parts to better fit together when assembled. Also, the tape tip slide is beefier. I print 100% infill, ABS or PLA, no support. 2/2/2019. The PVC tape measure Yagi-Uda antenna is a common amateur radio project for transmitter hunting. I built these parts to eliminate the PVC joints and hose clamps. You will still need a PVC pipe rod to mount these parts. I added screw holes for the bases so glue isn't required. Long M3 hex machine screws were used to mount the covers. The 6...
Topics: Electronics, Amature_Radio, Ham_Radio, antenna, amateur_radio, thingiverse, yagi_antenna, stl
0
0.0
Apr 1, 2021
04/21
by
Henrique Vieira (Henk93)
data
eye 0
favorite 0
comment 0
THIS IS A ANTENNA 2.4GHZ DESIGNED BY ME TO FIT ALUMINIUM TUBING WITH 4MM DIAMETER I LEAVE THE ASSEMBLY ON A PHOTO
Topics: thingiverse, R/C Vehicles, DJI_MAVIC, yagi_antenna, YAGI, stl, Mavic_Mini
0
0.0
Mar 18, 2021
03/21
by
Jason Diamond (jdiamond77)
data
eye 0
favorite 0
comment 0
Mount a Yagi antenna onto a Servocity Actobotics 1.5 and .770 pattern (https://www.servocity.com/hole-pattern-information).
Topics: wifi_antenna, RPG, YAGI, actobotics, antenna, yagi_antenna_mount, stl, yagi_antenna, thingiverse,...
0
0.0
Jan 4, 2021
01/21
by
Jason Godwin (cockroach_dude)
data
eye 0
favorite 0
comment 0
This is an adapter to put 10mm elements on a 25mm boom. Print in PETG or ABS to use it outside.
Topics: Electronics, stl, yagi_antenna, thingiverse
0
0.0
Jan 3, 2021
01/21
by
Jeremy Carter (ReallyBigTeeth)
data
eye 0
favorite 0
comment 0
If you like what you see here, consider leaving a tip. Use this file is to create a frame for the driven, reflector, and parasitic elements of a biquad yagi of your own specifications. The default values are for a 2.4 GHz antenna with a centre frequency of 2.442 GHz (centre of WiFi channels), but can be made resonant at just about any frequency, with as many elements as you wish. Updates: 2018 Jan 7 Initial upload with basic frame. 2018 Jan 8 Added optional configurable holes for antenna boom....
Topics: radio biquad yagi, yagi antenna fpv, yagi antenna, wifi yagi, biquad design, r/c yagi, fpv antenna,...
0
0.0
Apr 17, 2021
04/21
by
Julius B (jolle1441)
data
eye 0
favorite 0
comment 0
This Item is a remix to the Biquad yagi antenna. You can attach the upper part to the elements with superglue or with your soldering iron. From an old rod lighter i used the rod to connect the bottom part and the part attached to the yagi. I made holes with a diameter of 9.6mm (I think all rod lighters are standardized so it should fit!)
Topics: stand, yagi_antenna, thingiverse, biquad, stl, Electronics
0
0.0
Mar 22, 2021
03/21
by
Kerry Krell (Hawkitch)
data
eye 0
favorite 0
comment 0
I made a 3d printable version of Brian Beezley's sleeve dipole design, see links below. He measured 6db gain. The center hole is 12mm diameter, in the pic I cut it bigger with dykes to fit an oval antenna. The holes are tight, heat up the wire with boiling water to push through the holes. "...the elements are made of #14 copper wire. The reflector is 2¼″ long and spaced 19⁄16″ from the center of the sleeve dipole. The director is 2″ long and spaced 15⁄16″. Conductor diameter...
Topics: YAGI, stl, 3D Printing, thingiverse, yagi_antenna
0
0.0
Mar 3, 2021
03/21
by
Luca Molino (IV3ZNK)
data
eye 0
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iFH3IYr6Imb
Topics: YAGI_INSULATOR, thingiverse, yagi_antenna, stl, Hobby
0
0.0
Mar 3, 2021
03/21
by
Luca Molino (IV3ZNK)
data
eye 0
favorite 0
comment 0
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/dp8afmMVTsP
Topics: YAGI_INSULATOR, thingiverse, yagi_antenna, stl, Hobby
0
0.0
Mar 24, 2021
03/21
by
Luca bennati (lucabennati1996)
data
eye 0
favorite 0
comment 0
A simple parts holder to build a 5 elements Yagi for the 2m band, project of the antenna is not mine. it was made by 4S5DRJ, i just did the plastic parts to build the antenna itself. Highly reccomend to use PETG filament, it doesn't absorb humidity and it doesn't suffer the heat of the sun. Print as many pieces as you need (antenna is modular, you can use more or less elements as you prefer), pieces has a 6mm hole to use alluminium rods (found in DIY shop) and held in place with a small screw....
Topics: stl, yagi_antenna, antenna_mount, thingiverse, DIY, YAGI, antenna
0
0.0
Mar 15, 2021
03/21
by
Martin Haun (nix-disco)
data
eye 0
favorite 0
comment 0
My portable 2m 6 element yagi for portable use as 3D printed version. I made some changes compared to Ondra's design: No more glueing required in order to connect the crosses to the gfrp tubes. Screws are used instead. Boom locking is realized by small inserts. For details and complete building practice see attached pdf! 73 Martin - DF6MH
Topics: thingiverse, YAGI, yagi_antenna, amateur_radio, Electronics, portable, stl, Ham_Radio
0
0.0
Apr 16, 2021
04/21
by
Michael White (Eastcoast8741)
data
eye 0
favorite 0
comment 0
Made a little something to help mount a 1.3 yagi to the MFD ATT Uses 4 normal 1/4'' self tapping screws for the lid. Use 2-3 bigger cable ties to secure the antenna in the case.
Topics: yagi_antenna, thingiverse, stl, R/C Vehicles, yagi_antenna_holder, yagi_antenna_mount, MFD
0
0.0
Apr 1, 2021
04/21
by
Nick Naton (ah1102)
data
eye 0
favorite 0
comment 0
Version 1.1 - added "cap_top_holder_10mm.stl" (Top cap with mounting hole) ------------------------- This is a compact and lightweight 145/435 MHz antenna designed for measuring tape 12.5x0.1 mm. Antenna Length 357 mm. Easy to assemble and disassemble. Design: El length position (from the edge of 1 element to the edge of the next) 1 1032 0 2 337 27 3 313 158 4 1017 180 (End-to-end length with 5 mm spacing) 5 312 254 6 926 313 7 298 357 Materials: PVC pipe 20 mm (wall thickness 1,2 mm)...
Topics: uda_yagi, Ham_Radio, Dualband_Antennas, hamradio, amateur_radio, yagi_145, yagi_antenna,...
0
0.0
Jan 6, 2021
01/21
by
Nihat Duran (DURANWORKS)
data
eye 0
favorite 0
comment 0
Perfect DESIGN Mavic mini 2.4GHZ yagi antenna
Topics: R/C Vehicles, stl, yagi_antenna, Mavic_Mini, thingiverse
0
0.0
Mar 16, 2021
03/21
by
OP K (OPK)
data
eye 0
favorite 0
comment 0
I stood on the shoulders of ReallyBigTeeth and Andrew McNeil (https://www.youtube.com/watch?v=TanbyHBKrvU) and adapted the design a bit: - made "step-wise tapered" guides so that the element can only positioned the optimal way - the parasitic elements have different size mounting holes to fit only at one position on the guides: "fool proof" ;) - added a reflector made of aluminium foil clamped in-between 2 back elements - back cover allows for tri-pod mount - used 2.5mm2...
Topics: 24GHz, Wireless, Ghz, biquad, tripod, reflector, WLAN, antenna, YAGI, swr, stl, biquad_yagi,...
0
0.0
Mar 21, 2021
03/21
by
Ond?ej MEISSLER (meissler)
data
eye 0
favorite 0
comment 0
Yagi antenna is designed for DJI Phantom Vision or Vision Plus as additional extender for transmitter antenna. Opposite to parabolic antenna has lower gain but wider angle of radiation. I when I tested reached 808m/2650ft in CE mode i.e. up 200m/650ft than without yagi. I designed it for use reamins of Cu sheet and I suppose better results with Al or Cu rods. Thanks to http://www.k7mem.com/Electronic_Notebook/antennas/yagi_vhf_quick.html
Topics: stl, dji_phantom_2, dji_phantom, R/C Vehicles, thingiverse, yagi_antenna
0
0.0
Apr 14, 2021
04/21
by
Ondrej Kolonicny (ok1cdj)
data
eye 0
favorite 0
comment 0
You can print light portable yagi components. The boom is 25 mm PVC or Al pipe. Elements are 3.2 mm Al welding rods. Reflector for 2m antenna is divided to 2 parts. Is longer than 1m and is connected with screw terminal. Radiator is 4mm brass welding rod. You can build any antenna from http://www.qsl.net/dk7zb/PVC-Yagis/PVC-details.htm You can buy 3D printed components here: http://hamshop.cz/antennas-c9/portable-yagi-antenna-components-kit-i301/
Topics: thingiverse, openscad, antenna, DIY, YAGI, stl, yagim, yagi_antenna
0
0.0
Mar 24, 2021
03/21
by
Ondrej Kolonicny (ok1cdj)
data
eye 0
favorite 0
comment 0
DF6MH design adopted for 3D printing. More info: https://reflector.sota.org.uk/t/fiberglass-vhf-yagi-antenna/20650
Topics: stl, yagi_antenna, thingiverse, Electronics, YAGI, hamradio, antenna
0
0.0
Mar 8, 2021
03/21
by
Per Bjaanes (perb1970)
data
eye 0
favorite 0
comment 0
This is a 135Mhz search antenna. Use http://www.vk5dj.com/yagi.html as a refernce for yagi calculationes. As radiator i used a RG-400 cabel and shorted center and screen in the radiating element. this gives a flexibel antenna.
Topics: yagi_antenna_mount, Electronics, yagi_antenna, openscad, stl, thingiverse, mhz, YAGI_INSULATOR,...
As the communication technology is thriving day by day, the number of satellites are shooting up in a faster rate. The use of smaller satellites for Education, Scientific and Commercial purposes are usually positioned in LEO Low Earth Orbit flights and typically their short periods of crossing across the Line Of Sight of an Earth Station brings the need of finding ways of expanding the communication between ground and space segments. This paper elucidates the aspects related to the design and...
Topics: Electronics & Communication Engineering, Yagi antenna, Orbit, LOS, Simulation
0
0.0
Mar 13, 2021
03/21
by
Sebastian Stetter (sebste)
data
eye 0
favorite 0
comment 0
This thing is a collection of parts to build a duo band dipole for 2m / 70cm or a ultra portable duo band yagi-uda antenna. The yagi-uda weighs only about 340 grams and can be transported easily in a backpack as the elements can be nested inside the boom. The files contain the upper and lower side of the element mounting brackets that can be clamped onto a 16mm PVC electrical installations pipe. The radiators can be made of 2,4mm aluminium welding rods for TIG welding. The coax cable is...
Topics: thingiverse, yagi_antenna, antenna, amateur_radio, Ham_Radio, stl, Electronics
0
0.0
Apr 5, 2021
04/21
by
Seth Proaps (Seth_Proaps)
data
eye 0
favorite 0
comment 0
This support bracket is designed to help support the sidewalls of the "cheap and easy satellite downlink yagi antenna" featured on the AMSAT official website at ... https://www.amsat.org/cheap-and-easy-yagi-satellite-antennas/ This bracket requires no modification to the existing instructions for construction. It also looks like an iron sight (kind of).
Topics: thingiverse, cheap, foamboard, ready board, amateur_radio, yagi_antenna, stl, AMSAT, foamcore,...
0
0.0
Jan 3, 2021
01/21
by
Shura K (Shurak)
data
eye 0
favorite 0
comment 0
This is remix of original antenna. Since I could not find any information on how the yagi was calculated I re-did yagi calculation based on the Nist Technical Note 688 found here https://tf.nist.gov/general/pdf/451.pdf Calculated for 5800 MHz. Page 7 design for 1.2 lambda plus diameter correction applied derived from graphs on page 9. For directors and reflector use1.3 mm wire which can be obtained from stripped AWG 16 household copper wire. Get a 1 ft cut in your local hardware store, costs...
Topics: R/C Vehicles, stl, yagi_antenna, Mavic, Mavic_Mini, thingiverse, YAGI, drone
0
0.0
Mar 17, 2021
03/21
by
Stunt Double (StuntDouble)
data
eye 0
favorite 0
comment 0
This thing is a 1.2-1.3GHz 6 element yagi antenna for FPV. It has been designed using VK5DJ's yagi calculator - http://www.vk5dj.com/yagi.html. This antenna is a longer higher gain version of my 4 element yagi antenna. The 6 element design is about the maximum length that will fit onto a standard size printer bed. This antenna has only had a little amount of testing. So far it has been taken out to 20km with good results, further testing will be done soon. There are 6 of the common 1.2-1.3GHz...
Topics: fpv, YAGI, antenna, stl, yagi_antenna, thingiverse, R/C Vehicles
1
1.0
Jan 8, 2021
01/21
by
Suat Alper Seyhan (aseyhan)
data
eye 1
favorite 0
comment 0
can be screwed or superglued on 85*85 electrical box. Snug fit on 25 mm pvc. Can be glued or screwed to pvc for fixing.
Topics: 3D Printing, stl, yagi_antenna, amateur_radio, antenna, thingiverse, Ham_Radio
2
2.0
Jan 8, 2021
01/21
by
Suat Alper Seyhan (aseyhan)
data
eye 2
favorite 0
comment 0
6mm aluminum rods fits nicely to this separator/holder. Also fits nicely in a "mutlusan" branded 85x85 electrical box which is very common in my country. Makes life much easier while making a "DK7ZB" style yagi.
Topics: 3D Printing, stl, yagi_antenna, antenna, thingiverse, Ham_Radio
0
0.0
Mar 26, 2021
03/21
by
Tenchy UK (CADTenchy)
data
eye 0
favorite 0
comment 0
This is a simple button to replace aluminium ones I have been using. As a portable operating radio amateur I regularly transport sets of yagi elements for my 50MHz and 70MHz DK7ZB yagis. I use these buttons with 2mm diameter elastic from eBay to loop around the bundle of elements and keep them securely together and not rattling in the car en route. The extra loop of elastic sticking up in the photo is to pull on to make removal easier, something very useful with numb fingers. It's a dead simple...
Topics: stl, yagi_antenna, button, Ham_Radio, thingiverse, hamradio, tenchy, Hobby, elements, portable,...
0
0.0
Apr 17, 2021
04/21
by
Theo Bresler (ZS6TVB)
data
eye 0
favorite 0
comment 0
Printing time for this project is quite extensive but you will not regret either the filament used or the time spent printing for one moment. Parts are easy to print without issues. The end project is a professional looking antenna that looks and works well. Well worth your time spent. I have seen many antenna designs here but none met my needs. I required a reasonably strong and light weight. The complete antenna weighs out at around 650 gram (~23 ounce) with good strength. My drawing skills...
Topics: coax, director, VHF, receive, driven element, polarised, 70cm, coaxial, thingiverse, durable,...
0
0.0
Apr 4, 2021
04/21
by
Thomas Krenkel (DB6KT)
data
eye 0
favorite 0
comment 0
Inspired by the projekt SatNogs I create an rotorsystem with 2 cross-yagis for 2m and 70cm using HAM-Radio-satelites. For portable use and easy transport I mount one direction tied and on level for spinn in direction - each direction in diffrent color. The boom of the yagis are made from glasfiber fishingpoles (6m long). I only use the 2nd and 3rd elements of the fishing-pole for the yagis - the two biggist ones are for the rotor boom. You can use other boom material as well and for the...
Topics: thingiverse, Electronics, stl, satellite_antenna, Ham_Radio, yagi_antenna_mount
0
0.0
Apr 5, 2021
04/21
by
Todd Br (toddbr)
data
eye 0
favorite 0
comment 0
Handle for tape measure yagi antenna used in amateur radio fox hunts
Topics: thingiverse, foxhunt, amateur_radio, yagi_antenna, stl, YAGI, 3D Printing, Ham_Radio,...
0
0.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
This is designed to fir a 25x25mm boom using 8mm elements, it has an area for an so239 socket to keep it neat and tidy, look at my other things for different sizes Thanks 73 Ady 2E0ERO
Topics: Electronics, YAGI_INSULATOR, thingiverse, YAGI, yagi_antenna, yagi_antenna_mount, stl
1
1.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 1
favorite 0
comment 0
These are some insulators i make for the construction of a Yagi Antenna, these will fit a 15x15mm aluminium boom and are for element sizes 6-10-12mm round bar/tubing, Please see my other things I will be uploading some driven element mounts to suit, I usually centre the tube then retract slightly and use a dab of superglue and re centre.... Thanks 73 Ady M6YPA/2E0ERO
Topics: Ham_Radio, ham_radio_antenna, beam antenna, thingiverse, YAGI, yagi_antenna, DIY, YAGI INSULATOR,...
0
0.0
Apr 18, 2021
04/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
This driven element is intended for use when constructing a gamma matched yagi antenna, it has the fitting area for an so239 standard square type chassis mount socket,, It will fit a 15x15mm boom and will take 8mm round tube/bar for the elements , it could also be used as a gamma matched dipole.... Please see my other things for more antenna parts coming soon regards Ady M6YPA/2E0ERO 73
Topics: yagi antenna, amateur_radio, driven_element, thingiverse, stl, DIY, Gamma match
0
0.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
This is designed to fir a 25x25mm boom using 10mm elements, it has an area for an so239 socket to keep it neat and tidy, look at my other things for different sizes Thanks 73 Ady 2E0ERO
Topics: Electronics, YAGI_INSULATOR, thingiverse, YAGI, yagi_antenna, yagi_antenna_mount, stl
0
0.0
Jan 19, 2021
01/21
by
adrian cattell (ady1306)
data
eye 0
favorite 0
comment 0
These are some insulators i make for the construction of a Yagi Antenna, these will fit a 25X25mm aluminium boom and are for element sizes 6-8-10mm round bar/tubing, Please see my other things I will be uploading some driven element mounts to suit, I usually centre the tube then retract slightly and use a dab of superglue and re centre.... Thanks 73 Ady M6YPA/2E0ERO
Topics: Electronics, YAGI_INSULATOR, thingiverse, YAGI, yagi_antenna, stl
1
1.0
Jan 11, 2021
01/21
by
andre blaauw (Andreb70)
data
eye 1
favorite 0
comment 0
Looks very nice if i my say made it my selve. Did not fully test the antenna.
Topics: YAGI, thingiverse, stl, yagi_antenna_mount, yagi_antenna, DIY, yagi_antenna_holder
0
0.0
Mar 24, 2021
03/21
by
ben lipsey (varind)
data
eye 0
favorite 0
comment 0
Bits and pieces to build a Yagi for just about any frequency and number of elements. Photos show my 4 element GMRS antenna. Elements are 1/4in round aluminum rods. I threaded the end of the driven element with a die. PVC is "1/2 in" PVC Pipe (OD is .84") 8-32x3/8 set screws hold everything in place. These may affect the radiation pattern... EDIT: I've added an stl for the McMaster-Carr equivalent screw. I'm now using printed PLA set screws! Element length and space determined...
Topics: Amature_Radio, element, frs, repeater, frequency, ham, log periodic, Electronics,...
0
0.0
Jan 17, 2021
01/21
by
dae dae (daedb)
data
eye 0
favorite 0
comment 0
Due to the small form Factor of a 5Ghz Biquad Yagi antenna, it might be useful to just wrap around wire instead of complicately bending. The idea is to wrap while tightening the edges with the edge tool. Then solder the loop closed Lastly tighten middle part with 2nd tool. This needs some improvement overall. I could get a 30% improvement in throughput compared to a standard 5dbi antenna. (My test was against 2 concrete walls. 70 mpbs standard antenna, 100 mbps with yagi=) This is less than I...
Topics: thingiverse, biquad_yagi, YAGI, yagi_antenna, Wifi, Computer, stl, wifi_antenna
0
0.0
Jan 13, 2021
01/21
by
galeviel none (galeviel)
data
eye 0
favorite 0
comment 0
This is a printable handle for a yagi antenna. It includes a compass mount, so that the antenna can be used for radio direction finding a.k.a. fox hunts. Furthermore the handle is hollow. thus making it possible to mount on a pole. But be careful what material you are using to print the parts in regards of stability. To connect all pieces I used M4 nuts and M4x8 or M4x10 screws. The antenna is friction fitted by the screws on the bottom of the prints. A compass can be mounted using zip-ties. I...
Topics: thingiverse, amateur_radio, stl, yagi_antenna_mount, DIY
