Standard shop efficiency schedules

THE UNIVERSITY
OF ILLINOIS
LIBRARY

<»%\a

J

N.\3

V

Digitized by the Internet Archive
in 2016

https://archive.org/details/standardshopeffi13jaco

Santa Fe

The Atchison, Topeka & Santa Fe Railway System

Standard Shop Efficiency Schedules

BLACKSMITH SHOP

Locomotive Department

Volume XIII

Approved ;

W. F. BUCK

Supt. Motive Power

H. W. JACOBS

Asst. Supt. Motive Power

TOPEKA, KANSAS:
Crane CS. Company, Publishers
1912

\j.\i

Copyright 1912
Br HENRY W. JACOBS
Topeka, Kansas

STANDARD BLACKSMITH SHOP
EFFICIENCY SCHEDULES

Volume XI Treats of the operations in the Blacksmith Shop on
Locomotive Cylinders, Frames and Frame Braces,
Valves and Valve Motion, and Guides and Pistons.

Volume XII Treats of the operations in the Blacksmith Shop on
Locomotive Main and Side Rods, Carrying Gear, Lead-
ing and Trailer Trucks, Driving and Truck Brakes,
Driving Wheels and Boxes, and Steam and Dry Pipes.

Volume XIII Treats of the operations in the Blacksmith Shop on
Locomotive Boiler Mountings, Cab and Wood Work,
Air Brake Mechanism, Boiler, Ash Pan, Tender, and
Forging of all Tools.

Volume XIV Treats of the operations in the Blacksmith Shop on
Freight and Passenger Car Forgings.

W.

CONTENTS VOL. XIII

Page

Boiler Mountings 3 to 134

Cab and Wood Work 139 to 186

Air-Brake Mechanism 191 to 233

Boiler 237 to 305

Ash Pan and Grate Rigging 312 to 457

Tender 465 to 609

Miscellaneous Locomotive 613 to 616

Forged Tools 619 to 759

(iv)

STANDARD SCHEDULES

NUMBERS ASSIGNED TO SHOPS

1. Erecting Shop.

2. Machine Shop.

3. Boiler Shop.

4. Blacksmith Shop.

5. Tin Shop.

6. Pipe Shop.

7. Paint Shop.

8. Carpenter Shop,

9. Round House.

10. Miscellaneous (Water Service.
Pile Driver, Derricks, etc.)

(v)

STANDARD SCHEDULES

LETTERS ASSIGNED TO DETAILED PARTS

LOCOMOTIVE

A. Cylinders.

B. Frames and Frame Braces.

C. Valves and Valve Motion.

D. Guides and Piston.

E. Main and Side Rods.

G. Carrying Gear.

H. Leading and Trailer Trucks.

J. Driving and Truck Brakes

K. Driving Wheels and Boxes.

L. Steam and Dry Pipes.

M. Boiler Mountings.

F. Freight Cars.

N. Cab and Wood Work.

O. Pipe and Tin Work.

Q. Air Brake Mechanism.

R. Boiler Shell, Firebox, Flues and

Smoke Box.

S. Ash Pan and Grate Rigging.

T. Superheater.

U. Tender '

V. Unassigned.

W. Miscellaneous Locomotive,

Y. Tools.

P. Passenger Cars

MISCELLANEOUS

X. Miscellaneous other than I.ocomo- Z. Miscellaneous — Foremen, Office, etc.
tive.

(vi)

STANDARD BLACKSMITH SHOP
SCHEDULES

NUMBERS ASSIGNED TO OPERATIONS

0.

Annealed.

13. Made.

1.

Balled up (upset).

14. Moved.

2.

Bend.

14a. Painted.

3.

Closed.

15. Punched.

4.

Cut.

15a. Removed.

5,

Case-hardened.

16. Scarfed.

6a.

Dismantled

17. Shortened.

6.

Dressed.

17a. Squared.

7.

Fitted.

18. Straightened

8.

Flattened.

19. Shrunk.

9.

Forged.

19a. Tempered.

10.

Formed.

20. Twisted.

11.

Ground.

20a. Upset.

11a.

Heated.

21. Welded.

12.

Lengthened

22.

(vii)

BOILER MOUNTINGS

BLACKSMITH SHOP SCHEDULES.

LOCOMOTIVE DEPARTMENT.

BOILER MOUNTINGS

Box, Sand

BRACKET

Includes changing bend in sand box bracket.
Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M10-4 Cut — Iron.

Includes cutting iron for sand box bracket at power shears.
Power shears :

1-All sketches, per bracket

j

Rate

Rate

BOILER MOUNTINGS

Box, Sand — Bracket

3

4

BLACKSMITH SHOP SCHEDULES.

Box, Sand

BRACKET

4M 10-12 Lengthened or shortened. Rate

Includes lengthening or shortening sand box bracket by drawing out or
upsetting same.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bracked after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M 10-13 Made. Rate

Includes getting material for sand box bracket, forging, bending, dressing
and finishing complete.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per bracket after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4M 10-18 Straightened. Rate

Includes straightening old sand box bracket when same has become bent.
Forge.

• Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bracket after first one :

7- As per sketch No. 1 • -

8- As per sketch No, 2 -

9- As per sketch No. 3 -

BOILER MOUNTINGS
Box, Sand — Bracket

BOILER MOUNTINGS.

5

Box, Sand

BRACKET

4M10-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in sand box bracket,
dressing and finishing over weld complete.

Forge :

1- Per first break

2- Per break after first one

4M10-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in sand box bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

Per place repaired after first one :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

4M10-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in sand box bracket, dressing
and finishing over weld complete.

Forge :

20- Per first hole ....

21- Per hole after first one ....

BOILER MOUNTINGS

Box, Sand — Bracket,

6

BLACKSMITH SHOP SCHEDULES.

Box, Sand

BRACKET, STEP

c5a/7cf3ox ^tep Src/c/fet3

4M12-2 Bend changed.

Includes changing bend in sand box step bracket.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

Per bend changed after first one :

•5-As per sketch No.l

6-As per sketch No. 2

4M12-4 Cut — Iron. Rate ..

Includes cutting iron for sand box step bracket at power shears.

Power shears :

1-All sketches, per bracket

4M12- 7 Fitted up. Rate

Includes heating and bending new sand box step bracket to fit boiler com-
plete, after bracket has been made, or refitting old bracket to boiler.

Forge :

1- Per first bracket -

2- Per bracket after first one

BOILER MOUNTINGS

Box, Sand — Step Bracket

BOILER MOUNTINGS.

Box, Sand

BRACKET, STEP

4M 12-12 Lengthened or shortened. Rate

Includes lengthening or shortening sand box step bracket by drawing out
or upsetting same.

Forge.

Per first bracket :

1- As per sketch No. 1 •

2- As per sketch No. 2

Per bracket after first one ;

5- As per sketch No. 1

6- As per sketch No. 2

4M 12-13 Made. Rate

Includes getting material for sand box step bracket, forging, bending, dress-
ing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

•5-As per sketch No. 1

6-As per sketch No. 2

4M12-18 Straightened. Rate

Includes straightening old sand box step bracket when same has become
bent.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

4M12-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in sand box step bracket,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

BOILER MOUNTINGS
Box, Sand — Step Bracket

8

BLACKSMITH SHOP SCHEDULES.

Box, Sand

BRACKET, STEP

4M12-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in sand box step bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

5- As per sketch No. 1

6- As per sketch No. 2

Per place repaired after first one :

9-As per sketch No. 1

10-As per sketch No. 2

4M12-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in sand box step bracket, dress-
ing and finishing over weld complete.

Forge :

12- Per first hole

13- Per hole after first one

BOILER MOUNTINGS

Box, Sand — Step Bracket

BOILER MOUNTINGS.

9

Box, Sand

LEVER, HAND

Sox Sancf /Le/^ens

° vA .

4M20-2 Bend changed. Rate.

Includes changing bend in sand box hand lever.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 4

Per bend changed after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10-As per sketch No. 4

4M20-4 Cut — Iron. Rate

Includes cutting iron at power shears for sand box hand lever.

Power shears :

1-All sketches, per lever

BOILER MOUNTINGS

Box, Sand — Hand Lever

10

BLACKSMITH SHOP SCHEDULES.

Box, Sand

LEVER, HAND

4M20-4 Cut and ground. Rate

Includes cutting iron for sand box hand lever at power shears, grinding
ends of lever at emery wheel complete.

Power shears and emery wheel.

Per first lever :

4- As per sketch No. 3

5- As per sketch No. 4

Per lever after first one :

8- As per sketch No. 3

9- As per sketch No. 4

4M20-12 Lengthened or shortened. Rate

Includes lengthening or shortening sand box hand lever by drawing out
or upsetting same.

Forge.

Per first lever ;

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per lever after first one :

8- As per sketch No. 1 . ..

9- As per sketch No. 2

10- As per sketch No. 3 ,

11- As per sketch No. 4

4M20-13 Made. Rate

Includes getting material for sand box hand lever, forging, bending, dress-
ing and finishing complete.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4 .

Per lever after first one :

8- As per sketch No.l

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

BOILER MOUNTINGS
Box, Sand — Hand Lever

BOILER MOUNTINGS.

11

Box, Sand

LEVER, HAND

4M20-21 Welded (break). Rate.

Includes doing necessary scarfing, welding break in sand box hand lever,
dressing and finishing over weld complete.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per lever after first one :

9-As per sketch No. 1

10- As per sketch No. 2

11- As per sketch No. 3

12- As per sketch No. 4

4M20-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in sand box hand lever,
dressing and finishing over weld complete.

Forge.

Per first lever :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

33- As per sketch No. 4

Per lever after first one :

40- As per sketch No.l

41- As per sketch No. 2

42- As per sketch No. 3

43- As per sketch No. 4

4M20-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in sand box hand lever, dress-
ing and finishing over weld complete.

Forge.

Per first hole :

50- As per sketch No. 1

51- As per sketch No. 2, hole in end

52- As per sketch No. 3

53- As per sketch No. 3, hole in boss

54- As per sketch No. 4 !

Per hole after first one :

60- As per sketch No.l

61- As per sketch No. 2, hole in end

62- As per sketch No. 3

63- As per sketch No. 3, hole in boss

64- As per sketch No. 4

BOILER MOUNTINGS

Box, Sand^ — Hand Lever

12

BLACKSMITH SHOP SCHEDULES.

Box, Sand

LEVER, HAND— ROD

Co/7c/3ox /fffr?clleypr /?od.

So/tc/Box 3£7/7cf lexer Bod

4M22-12 Lengthened or shortened. Rate

Includes lengthening or shortening sand box hand lever rod by drawing out
or upsetting.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one ;

5- As per sketch No. 1

6- As per sketch No. 2

4M22-13 Made. Rate

Includes getting material for sand box hand lever rod, forging, bending,
dressing and finishing complete.

Forge.

Per first rod :

1-As per sketch No. 2

Per rod after first one :

5-As per sketch No. 2

4M22-18 Straightened. Rate

Includes straightening old sand box hand lever rod when same has become
bent.

Forge.

Per first bend repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per bend repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS

Box, Sand — Hand Lever Rod

BOILER MOUNTINGS.

13

Box, Sand

LEVER, HAND— ROD

4M22-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in sand box hand lever
rod, dressing and finishing over weld complete.

Forge :

1- Per first place repaired .... .

2- Per place repaired after first one

4M22-21 Welded (new end). Rate

Includes doing necessary scarfing, welding new end on sand box hand lever
rod, dressing and finishing over weld complete.

Forge :

5-P3r first end

8-P3r 31 1 x'fcir fir?!: one

OILER MOUNTINGS
Box, Sand— Hand Lever Rod

14

BLACKSMITH SHOP SCHEDULES.

Box, Sand

VALVE ARM

Includes getting material for sand box valve arm, forging, dressing, bending
and finishing complete.

Forge.

Per first arm :

1- As per sketch No.l

2- As per sketch No. 2

Per arm after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M28-18 Straightened. Rate

Includes straightening old sand box valve arm when same has become bent.
Forge :

1- Per first arm

2- Per arm after first one

4M28-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in sand box valve arm, dressing
and finishing over weld complete.

Forge :

1- Per first hole in flat end

2- Per hole after first one in flat end

3- Per first hole in boss end

4- Per hole after first one in “boss end

4M28-21 Welded (new end). Rate

Includes getting material, welding necessary stock on flat end of old sand box
valve arm, dressing and finishing end complete.

Forge :

8- Per first end

9- Per end after first one

BOILER MOUNTINGS
Box, Sand — Valve Arm

BOILER MOUNTINGS.

15

Box, Sand

VALVE ARM CONNECTION

C)'67/7c/ Box ^67/ye Br/n Co/7r?ection.

S(7/7c/ Box yo/xe
Br/77 Co/7/7ecT/ on.

4M32-2 Bend, changed. Rate

Includes changing bend in sand box valve arm connection.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M32-6 Dressed. Rate

Includes dressing and finishing complete, sand box valve arm connection.
Forge.

Per first connection :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per connection after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS
Box, Sand — Valve Arm Connection

16

BLACKSMITH SHOP SCHEDULES.

Box, Sand

VALVE ARM CONNECTION

4M32-9 Forged. Rate

Includes getting material and blocking out and forging sand box valve arm
connection complete, ready for dressing.

Steam hammer.

Per first connection :

1- As per sketch No. 1, forged solid

2- As per sketch No. 2, forged solid

3- As per sketch No. 3, forged solid

Per connection after first one :

7- As per sketch No. 1, forged solid. .

8- As per sketch No. 2, forged solid

9- As per sketch No. 3, forged solid

Forge.

Per first connection :

12- As per sketch No. 1, forged solid

13- As per sketch No. 2, forged solid

14- As per sketch No. 3, forged solid

Per connection after first one :

18- As per sketch No. 1, forged solid

19- As per sketch No. 2, forged solid

20- As per sketch No. 3, forged solid

4M32-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing sand
box valve arm connection complete.

Forge.

Per first connection ;

25- As per sketch No. 1, forged solid

26- As per sketch No. 2, forged solid

27- As per sketch No. 3, forged solid

Per connection after first one :

30- As per sketch No. 1, forged solid

31- As per sketch No. 2, forged solid

32- As per sketch No. 3, forged solid

BOILER MOUNTINGS

Box, Sand — Valve Arm Connection

BOILER MOUNTINGS.

17

Box, Sand

VALVE ARM CONNECTION

4M32-12 Lengthened or shortened (by drawing out or upsetting).

Rate

Includes lengthening or shortening complete, sand box valve arm connection
by drawing out or upsetting same.

Forge.

Per first connection :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per connection after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3 ..

4M32-12 Lengthened or shortened (by welding). Rate

Includes cutting sand box valve arm connection in two, taking out required
stock or doing necessary scarfing, welding in required stock, dressing over
weld and finishing connection to length complete.

Forge.

Per first weld in connection ;

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3 '

Per weld in connection after first one :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 3

4M32-13 Made. Rate

Includes getting material, welding pieces together to form sand box valve
arm connection, dressing and finishing arm connection complete.

Forge.

Per first connection :

1- As per sketch No. 1

2- As per sketch No. 3

Per connection after first one :

5- As per sketch No. 1

6- As per sketch No. 3

BOILER MOUNTINGS
Box, Sand — Valve Arm Connection

18

BLACKSMITH SHOP SCHEDULES.

Box, Sand

VALVE ARM CONNECTION

4M32-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in sand box valve arm
connection, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M32-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in sand box valve arm
connection, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1 ..

13- As per sketch No. 2

14- As per sketch No, 3

Per place repaired after first one :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 3

4M32-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in sand box valve arm connection,
dressing and finishing over weld complete.

Forge.

Per first hole :

25- As per sketch No. 1, hole in jaw end

26- As per sketch No. 2, hole in flat end

27- As per sketch No. 2, hole in boss end

28- As per sketch No. 3, hole in jaw end —

Per hole after first one :

32- As per sketch No. 1, hole in jaw end

33- As per sketch No. 2, hole in flat end

34- As per sketch No. 2, hole in boss end

35- As per sketch No. 3, hole in jaw end

BCILER MOUNTINGS

Box, Sand — Valve Arm Connection

BOILER MOUNTINGS.

19

Box, Sand

VALVE ARM CONNECTION

4M32-21 Welded (new end) (includes making). Rate

Includes forging out new end for sand box valve arm connection, welding
same in place of old end, dressing and finishing end complete.

Forge.

Per first end :

40- As per sketch No. 1, jaw end

41 - As per sketch No. 2, flat end

42- As per sketch No. 3, jaw end . ..

Per end after first one :

45- As per sketch No. 1, jaw end

46- As per sketch No. 2, flat end

47- As per sketch No. 3, jaw end

4M32-21 Welded (new end) (after same has been made). Rate

Includes getting new end of sand box valve arm connection, after same has
been made, doing necessary scarfing, welding end on connection, dressing and
finishing over weld complete.

Forge.

Per first end :

55- As per sketch No. 1, jaw end

56- As per sketch No. 2, flat end

57- As per sketch No. 3, jaw end

Per end after first one :

60- As per sketch No. 1, jaw end

61- As per.sketch No. 2, flat end

62- As per sketch No. 3, jaw end

BOILER MOUNTINGS
Box, Sand — Valve Arm Connection

20

BLACKSMITH SHOP SCHEDULES.

Box, Sand

VALVE ARM CONNECTION— END

4M34-13 Made. Rate

Includes getting material for end of sand box valve arm connection, forging
and dressing complete, ready to be welded.

Forge.

Per first end :

1- As per sketch No. 1, jaw end

2- As per sketch No. 2, flat end

3- As per sketch No. 3, jaw end

Per end after first one :

8- As per sketch No. 1, jaw end

9- As per sketch No. 2, flat end

10-As per sketch No. 3, jaw end

BOILER MOUNTINGS

Box, Sand — Valve Arm Connection End

BOILER MOUNTINGS.

21

Cock, Blowoff
LEVER

B/Of/O// C ock Letter

(®

4M40-2 Bend, changed.

B/Oh' Off Cock I e^er

Rate

Includes changing bend in blowoff cock lever.
Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No, .3

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 3

4M40-6 Dressed.

Rate

Includes dressing and finishing blowoff cock lever after same has been
blocked out and forged.

Forge.

Per first lever :

1- As per sketch No. 3

2- As per sketch No. 4

Per lever after first one :

5- As per sketch No. 3

6- As per sketch No. 4

BOILER MOUNTINGS

Cock, Blowoff — Lever

22

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff
LEVER

4M40-9 Forged. Rate

Includes getting material, blocking out and forging blowoff cock lever com-
plete.

Steam hammer.

Per first lever :

1- As per sketch No. 3 ..

2- As per sketch No. 4

Per lever after first one :

5- As per sketch No. 3

6- xA.s per sketch No. 4

Forge.

Per first lever :

10- As per sketch No. 3

11- As per sketch No. 4

Per lever after first one :

14- As per sketch No. 3 ..

15- As per sketch No. 4

4M40-9 Forged and dressed. Rate

, Includes getting material, blocking out, forging, cutting jaw if necessary,
dressing and finishing blowoff cock lever complete.

Forge.

Per first lever :

20- As per sketch No. 1

21- As per sketch No. 2, made solid

22- As per sketch No. 3

23- As per sketch No. 4

Per lever after first one :

27- As per sketch No. 1

28- As per sketch No. 2, made solid

29- As per sketch No. 3

30- As per sketch No. 4

BOILER MOUNTINGS
Cock, Blowoff — Lever

BOILER MOUNTINGS.

23

Cock, Blowoff

LEVER

4M40-12 Lengthened or shortened. Rate

Includes lengthening or shortening blowoff cock lever by drawing out or up-
setting same.

Forge.

Per first place lengthened or shortened :

1- As per sketch No. 1 .

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per place lengthened or shortened after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4 -

4M40-13 Made. Rate

Includes getting material, doing necessary scarfing, welding to form blowoff
cock lever, dressing and finishing lever to shape complete.

Forge :

1- Per first lever

2- Per lever after first one

4M40-18 Straightened. Rate

Includes straightening old blowoff cock lever when same has become bent or
twisted.

Forge.'

Per first place straightened :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per place straightened after first one :

10- As per sketch No. 1

11- As per sketch No. 2 !

12- As per sketch No 3

13- As per sketch No. 4

BOILER MOUNTINGS

Cock, Blowoff — Lever

24

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

LEVER

4M40-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in blowoff cock lever, dress-
ing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4 ..

Per place repaired after first one :

10- As per sketch No. 1 .

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4 »

4M40-21 Welded (crack). Rate...

Includes making dutchman, welding same in crack in blowoff cock lever,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3

23- As per sketch No. 4 ...

Per place repaired after first one :

30- As per sketch No. 1

3 1- As per sketch No. 2 .

32- As per sketch No. 3

33- As per sketch No. 4 ...

4M40-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in blowoff cock lever, dressing
and finishing over weld complete.

Forge. ’

Per first hole :

40- Hole in body of lever as per sketches Nos. 1, 2, 3, 4. . . .

41- Hole in jaw as per sketches Nos. 1, 2

42- Hole in boss end as per sketches Nos. 3, 4

Per hole after first one :

45- Holes in body of lever as per sketches Nos. 1, 2, 3, 4

46- Holes in jaw end as per sketches Nos. 1, 2

47- Holes in boss end as per sketches Nos. 3, 4

BOILER MOUNTINGS
Cock, Blowoff— Lever

BOILER MOUNTINGS.

25

Cock, Blowoff
LEVER

4M40-21 Welded (new rounded ends on body) (making included).

Rate

Includes welding piece for new end on old blowoff cock lever body, dressing
and finishing rounded end complete.

Forge.

Per first end :

50- As per sketch No.l

51- As per sketch No. 2

52- As per sketch No. 3

53- As per sketch No. 4

Per end after first one :

60- As per sketch No. 1

61- As per sketch No. 2

62- As per sketch No. 3

63- As per sketch No. 4

4M40-21 Welded (new jaw end) (making included). Rate...

Includes getting material and forging new jaw end, welding same on old
blowoff cock lever, dressing and finishing end complete.

Forge.

Per first end :

71-As per sketch No. 1

Per end after first one :

73-As per sketch No. 1

4M40-21 Welded (new jaw end) (making not included). Rate

Includes getting jaw end for blowoff cock lever after end has been made,
welding end on body of old blowoff cock lever, dressing and finishing com-
plete.

Forge.

Per first end :

80-As per sketch No. 1

Per end after first one :

83-As per sketch No.l

BOILER MOUNTINGS

Cock, Blowoff — Lever

26

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

LEVER— END, JAW

4M42-13 Made. Rate

Includes getting material, forging solid, dressing and finishing complete,
jaw end for blowoff cock lever.

Forge.

Per first end :

1- As per sketch No. 1, forged solid

Per end after first one :

2- As per sketch No. 1, forged solid

4M42-13 Made from bar iron. Rate

Includes getting bar iron for jaw end of blowoff cock lever, cutting to length,
doing necessary welding, dressing and finishing complete.

Forge :

5- Per first jaw end ...

6- Per jaw end after first one.

BOILER MOUNTINGS

Cock, Blowoff — Lever Jaw End

BOILER MOUNTINGS.

27

Cock, Blowoff

LEVER FULCRUM

3/Oh^0//CocH

letter r/y/cri//77 .

4M48-13 Made.

Rate

Includes getting material for blowoff cock lever fulcrum, forging, bending,
dressing and finishing complete.

Forge :

1— Ppr first fiilpriim

2— Ppr fiilpnim aftpr first one

4M48-18 Straightened.

Rate

Includes straightening old blowoff cock lever fulcrum when
come bent.

same has be-

Forge :

1- Per first fulcrum

2- Per fulcrum after first one

4M48-21 Welded (crack).

Rato

Includes making dutchman, welding same in crack in blowoff cock lever
fulcrum, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M48-21 Welded (holes plugged).

Rate

Includes making plug, welding same in hole in blowoff cock lever fulcrum,
dressing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

BOILER MOUNTINGS
. Cock, Blowoff — Lever Fulcrum

28

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

ROD, CONNECTING

A^/Oi/ O// CocK Connect /n^ ffod.

3/0/^ ^Coc/rConnect//7f /?oct

^/founded Cnd

dah^rnd’

S/oif^ O/f Cock ConnecT/n^ Rod

3 .

3/oir Off Cock Connect/ng Rod

B/OiKOffCocK Connecting Rod

€.

4M52-2 Bend, changed. Rate.

Includes changing bend in blowoff cock connecting rod.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2 ; . .

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per bend changed after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

BOILER MOUNTINGS

Cock, Blowoff — Connecting Rod

BOILER MOUNTINGS.

29

Cock, Blowoff

ROD, CONNECTING

4M62-4 Cut — Iron. Rate

Includes cutting iron for blowoff cock connecting rod at power shears.
Power shears :

1-Per piece cut

4M62-4 Cut and ground. Rate

Includes cutting iron for blowoff cock connecting rod at power shears, and
grinding ends at emery wheel complete.

Power shears and emery wheel :

5- Per first blowoff cock connecting rod

6- Per blowoff cock connecting rod after first one

4M62-12 Lengthened or shortened. Rate

Includes lengthening or shortening blowoff cock connecting rod by drawing
out or upsetting same.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per rod after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. .5

15- As per sketch No. 6

4M52-13 Made. Rate

Includes getting material for blowoff cock connecting rod, forging, bending,
dressing and finishing complete.

Forge.

Per first connecting rod :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. .5

6- As per sketch No. 6

BOILER MOUNTINGS
Cock, Blowoff — Connecting Rod

30

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

ROD, CONNECTING

Per connecting rod after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

4M62-18 Straightened. Rate

Includes straightening old blowoff cock connecting rod when same has be-
come bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3 - As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per place repaired after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3 . -

13- As per sketch No. 4

14- As per sketch No. 5

15- ^As per sketch No. 6

4M62-21 Welded (break). Rate .

Includes doing necessary scarfing, welding break in blowoff cock connect-
ing rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5 -

6- As per sketch No. 6 -----

Per place repaired after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3 -

13- As per sketch No. 4

14- As per sketch No. 5 -

15- As per .sketch No. 6 -

BOILER MOUNTINGS

Cock, Blowoff — Connecting Rod

BOILER MOUNTINGS.

31

Cock, Blowoff

ROD, CONNECTING

4M62-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in blowoff cock con-
necting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

21- As per sketch No.l

22- As per sketch No. 2 '

23- As per sketch No. 3

24- As per sketch No. 4

25- As per sketch No. 5

26- As per sketch No. 6

Per place repaired after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

33- As per sketch No. 4

34- As per sketch No. 5

35- As per sketch No. 6

4M62-21 Welded (holes plugged). Rate.

Includes making plug, welding same in hole in blowoff cock connecting
rod, dressing and finishing over weld complete.

Forge.

Per first hole, jaw end :

40- As per sketch No.l

41- As per sketch No. 2

42- As per sketch No. 5

43- As per sketch No. 6

Per first hole, in body :

47- As per sketch No. 2

48- As per sketch No. 3

49- As per sketch No. 4

50- As per sketch No. 5

51- As per sketch No. 6

Per hole after first one, jaw end :

60- As per sketch No. 1 ..

61- As per sketch No. 2

62- As per sketch No. 5

63- As per sketch No. 6

Per hole after first one, in body :

70- As per sketch No. 2

71- As per sketch No. 3

72- As per sketch No. 4

73- As per sketch No. 5

74- As per sketch No. 6

BOILER MOUNTINGS
Cock, Blowoff — Connecting Rod

32

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

ROD, CONNECTING

4M52-21 Welded (new jaw end) (making included). Rate .

Includes getting material and forging new jaw end for blowoff cock connect-
ing rod, welding end on old rod, dressing and finishing end complete.

Forge.

Per first jaw end :

80- As per sketch No. 1

81- As per sketch No. 2

82- As per sketch No. 5

83- As per sketch No. 6

Per jaw end after first one :

85- As per sketch No.l

86- As per sketch No. 2

87- As per sketch No. 5

88- As per sketch No. 6

4M62-21 Welded (new jaw end) (making not included). Rate

Includes getting new jaw end of blowoff cock connecting rod after same has
been made, doing necessary scarfing, welding end on old connecting rod,
dressing and finishing over weld complete.

Forge.

Per first jaw end ;

95- As per sketch No. 1

96- As per sketch No. 2. . .

97- As per sketch No. 5

98- As per sketch No. 6

Per jaw end after first one :

102- As per sketch No. 1

103- As per sketch No. 2

104- As per sketch No. 5

105- As per sketch No. 6

4M52-21 Welded (new round end). Rate

Includes welding piece on rounded end of old blowoff cock connecting rod ,
dressing and finishing rounded end complete.

Forge.

Per first end ;

110- As per sketch No. 2

111- As per sketch No. 3 *.

112- As per sketch No. 4 ‘ ..

113- As per sketch No. 6

Per end after first one :

117- As per sketch No. 2

118- As per sketch No. 3

119- As per sketch No. 4

120- As per sketch No. 6

BOILER .MOUNTINGS

Cock, Blowoff — Connecting Rod

BOILER MOUNTINGS.

33

Cock, Blowoff

ROD,* CONNECTING— END, JAW

4M64-1 Made. Rate

Includes getting material for blowoff cock connecting rod jaw end, block-
ing out, forging, dressing and finishing complete.

Forge.

Per first end :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 5

4- As per sketch No. 6

Per end after first one :

6- As per sketch No.l

7- As per sketch No. 2

8- As per sketch No. 5

9- As per sketch No. 6

BOILER MOUNTINGS
Cock, Blowoff — Connecting Rod Jaw End

34

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff
SHAFT

4M6Q-4 Cut — Iron. Rate

Includes cutting iron at power shears for blowoff cock shaft.

Power shears :

1-Per shaft

4M60-18 Straightened. Rate

Includes straightening old blowoff cock shaft when same has become bent.
Forge :

1- Per first shaft repaired

2- Per shaft repaired after first one

BOILER MOUNTINGS
Cock, Blowoff — Shaft

BOILER MOUNTIEGS

35

Cock, Blowoff

SHAFT BRACKET

B/oi*' Off CocH 6/iaft BracKets

Blow Off CocH Shaft Bracken

3/oJkO//Cock
Sho/r Broc^er.

s

4M62-2XBend, changed. Rate.

Includes changing bend in blowoff cock shaft bracket.

Forge.

Per first bend changed :

1-As per sketch No. 1

^ 2-As per sketch No. 2

3- As per sketch No. 4

4- As per sketch No. 5

Per bend changed after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10- As per sketch No. 4

11- As per sketch No. 5

BOILER MOUNTINGS
Cock, Blowoff — Shaft Bracket

36

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

SHAFT BRACKET

4M62-6 Dressed. Rate

Includes dressing and finishing blowoff cock shaft bracket after same has
been forged.

Forge.

Per first bracket :

1-As per sketch No. 3 .

Per bracket after first one :

3-As per sketch No. 3

4M62-9 Forged. Rate

Includes getting material, blocking out and forging blowoff cock shaft
bracket.

Steam hammer.

Per first bracket :

1-As per sketch No. 3

Per bracket after first one :

.3-As per sketch No. 3

Forge.

Per first bracket : ,

7- As per sketch No. 3

Per bracket after first one :

8- As per sketch No. 3

4M62-13 Made. Rate

Includes getting material for blowoff cock shaft bracket, forging, bending,
dressing and finishing complete.

Forge.

Per first bracket ;

1- As per sketch No. 1 '

2- As per sketch No. 2

3- As per sketch No. 3 —

4- As per sketch No. 4

5- As per sketch No. 5

Per bracket after first one :

10- As per sketch No. 1 —

11- As per sketch No. 2

12- As per sketch No. 3 -

13- As per sketch No. 4

14- As per sketch No. 5

BOILER MOUNTINGS

Cock, Blowoff — Shaft Bracket

BOILER MOUNTINGS.

37

Cock, Blowoff

SHAFT BRACKET

4M62-18 Straightened. Rate

Includes straightening old blowoff cock shaft bracket when same has be-
come bent.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3 ,

4- As per sketch No. 4

5- As per sketch No. 5

Per bracket after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

4M62-21 Welded (break). Rate.

Includes doing necessary scarfing, welding break in blowoff cock shaft
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1-As per sketch No. 4

Per place repaired after first one :

5-As per sketch No. 4

4M62-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in blowoff cock shaft
brifcket, dressing and finishing over weld complete.

, Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

1.3-As per sketch No. 4

14-As per sketch No. 5

Per place repaired after first one :

19-As per sketch No.l

29- As per sketch No. 2

21- As per sketch No. 3

22- As per sketch No. 4

23- As per sketch No. 5

BOILER MOUNTINGS
Cock, Blowoff — Shaft Bracket

38

BLACKSMITH SHOP SCHEDULES.

Cock, Blowoff

SHAFT BRACKET

4M62-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in blowoff cock shaft bracket,
dressing and finishing over weld complete.

Forge.

Per first hole :

30- All holes in sketches Nos. 1, 2, 3, 4, 5, except hole in boss

sketch No. 3

33-Hole in boss sketch No. 3

Per hole after first one :

37-All holes in sketches Nos. 1, 2, 3, 4, 5, except hole in boss

sketch No. 3

39-Hole in boss sketch No. 3

BOILER MOUNTINGS

Cock, Blowoff — Shaft Bracket

BOILER MOUNTINGS.

CRANE, FRONT END

BOILER MOUNTINGS

Front End Crane

40

BLACKSMITH SHOP SCHEDULES.

Crane, Front End
BOOM

Fro/?/ fncf Crc7/7e 3oo/77

4M70-6 Dressed. Rate

Includes dressing and finishing front end crane boom after same has been
forged.

Forge :

1- Per first boom

2- Per boom after first one

4M70-9 Forged. Rate

Includes getting material, blocking out and forging front end crane boom
complete, ready fPr dressing.

Steam hammer :

1- Per first boom

2- Per boom after first one .

Forge :

3- Per first boom .

4- Per boom after first one

4M70-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing
complete, front end crane boom.

Forge :

5- Per first boom, forged solid

9-Per boom after first one, forged solid

4M70-12 Lengthened or shortened. Rate

Includes lengthening or shortening front end crane boom by drawing out
or upsetting same.

Forge :

1- Per first boom

2- Per boom after first one

4M70-13 Made from bar iron. Rate

Includes getting bar iron and cutting to length, dressing and finishing front
end crane boom complete.

Forge :

1- Per first boom

2- Per boom after first one

BOILER MOUNTINGS

Crane, Front End — Boom

BOILER MOUNTINGS.

41

Crane, Front End
BOOM

4M70-13 Made (by forging boss end and welding on bar iron).

Rate

Includes getting material for front end crane boom, blocking out and forg-
ing boss end, doing necessary scarfing, welding on bar iron on boom body,
dressing and finishing boom complete.

Forge :

7- Per first boom

8- Per boom after first one

4M70-13 Made (boss end) . Rate

Includes getting material for front end crane boom boss end, blocking out,
forging and dressing complete.

Forge :

11- Per first boss end

12- Per boss end after first one.

4M70-18 Straightened. Rate

Includes straightening old front end crane boom when same has become
bent.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M70-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in front end crane boom,
dressing and finishing over weld complete.

Forge :

' 1-Per first place repaired

2-Per place repaired after first one

4M70-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane boom,
dressing and finishing over weld complete.

Forge ;

5- Per first place repaired

6- Per place repaired after first one

BOILER MOUNTINGS
Crane, Front End — Boom

42

BLACKSMITH SHOP SCHEDULES.

Crane, Front End
BOOM

4M70-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in front end crane boom, dress-
ing and finishing over weld complete.

Forge.

Per first hole plugged :

9-Hole in rounded end

10-Hole in boss end

Per hole plugged after first one :

13- Hole in rounded end

14- Hole in boss end

4M70-21 Welded (new ends) (making included). Rate

Includes welding required stock on end of front end crane boom, dressing
and finishing to shape complete.

Forge.

Per first end :

20- Rounded end

21- Boss end

Per end after first one :

27- Rounded end

28- Boss end

4M70-21 Welded (new boss ends) (after made). Rate

Includes getting new boss end after same has been made, doing necessary
scarfing, welding boss end on body of front end crane boom, dressing and
finishing over weld complete.

Forge :

33-Per boss end

.37-Per boss end after first one -

BOILER MOUNTINGS
Crane, Front End — Boom

BOILER MOUNTINGS.

43

Crane, Front End
BOOM JIB

/^ro/7r fr?(y C/v/?e Boo/r? c//^

4M78-6 Dressed. Rate

Includes dressing and finishing front end crane boom jib complete, after
same has been forged.

Forge :

1- Per first jib

2- Per jib after first one

4M78-9 Forged. Rate

Includes getting material, blocking out and forging front end crane boom
jib complete, ready for dressing.

Steam hammer :

1- Per first jib

2- Per jib after first one

Forge :

3- Per first jib

4- Per jib after first one

4M78-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing
front end crane boom jib complete.

Forge :

8- Per first jib

9- Per jib after first one

4M78-12 Lengthened or shortened. Rate

Includes lengthening or shortening front end crane boom jib by drawing
out or upsetting same.

Forge :

1- Per first jib *

2- Per jib after first one

4M78-13 Made (by forging boss end and welding on bar iron).

Rate

Includes getting material for front end crane boom jib, blocking out and
forging boss end, doing necessary scarfing, welding bar iron on end, dress-
ing and finishing complete.

Forge :

1- Per first jib

2- Per jib after first one

BOILER MOUNTINGS
Crane, Front End — Boom Jib

44

BLACKSMITH SHOP SCHEDULES.

Crane, Front End
BOOM JIB

4M78-18 Straightened. Rate

Includes straightening old front end crane boom jib when same has become
bent.

Forge :

1- Per first place repaired

2- Per place repaired after first one •

4M78-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in front end crane boom
jib, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M78-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane boom
jib, dressing and finishing over weld complete.

Forge :

.5-Per first place repaired

6-Per place repaired after first one

4M78-21 Welded (new boss ends) (making included). Rate

Includes getting material, blocking out and forging boss end of front end
crane boom jib, doing necessary scarfing, welding ends on jib, dressing and
finishing end complete.

Forge :

10- Per first end

1 1- Per end after first one

4M78-21 Welded (new ends) (making not included). Rate,.

Includes getting new boss end of front end crane boom jib after same has
been forged, doing necessary scarfing, welding end on jib, dressing and fin-
ishing over weld corhplete.

Forge : .

15- Per first end

16- Per end after first one

BOILER MOUNTINGS

Crane, Front End — Boom Jib

BOILER MOUNTINGS.

45

Crane, Front End

BOOM JIB— END, BOSS

4M80-13 Made. Rate

Includes getting material for front end crane boom jib boss end, blocking
out, forging and finishing complete.

Steam hammer :

1- Per first boss end

2- Per boss end after first one

Forge :

3- Per first boss end

4- Per boss end after first one

BOILER MOUNTINGS
Crane, Front End — Boorn Jib Boss End

46

BLACKSMITH SHOP SCHEDULES.

Crane, Front End

BOOM JIB JAW

/ro/?C £^ncf Crane
GoomJ/C Jah^.

4M84-6 Dressed. Rate

Includes cutting jaw if necessary, dressing and finishing complete, front
end crane boom jib jaw after same has been forged.

Forge.

Per first jaw ;

1- When jaw is cut at forge

2- When jaw is not cut at forge

Per jaw after first one :

5- When jaw is cut at forge

6- When jaw is not cut at forge

4M84-9 Forged. Rate

Includes getting material, blocking out, forging front end crane boom jib
• jaw, cutting jaw if necessary, complete.

Steam hammer.

Per first jaw :

1 - When jaw is cut

2- When jaw is not cut

Per jaw after first one :

5- When jaw is cut

6- When jaw is not cut

Forge.

Per first jaw :

9- When jaw is cut

10- When jaw is not cut -

Per jaw after first one :

14- When jaw is cut

15- When jaw is not cut

BOILER MOUNTINGS

Crane, Front End — Boom Jib Jaw

BOILER MO UN TI NOS.

47

Crane, Front End

BOOM JIB JAW

4M84-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing front end crane boom jib jaw.

Forge :

21- Per first jaw when jaw is cut out

22- Per jaw after first one when jaw is cut out

23- Per first jaw when jaw is not cut out

24- Per jaw after first one when jaw is not cut out

4M84-18 Straightened. Rate

Includes straightening jaw of front end crane boom jib when jaw has become
bent.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M84-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane boom
jib jaw, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M84-21 Welded (holes plugged). Rat©

Includes making plug, welding same in hole in front end crane boom jib
jaw, dressing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

BOILER MOUNTINGS
Crane, Front End — Boom Jib Jaw

48

BLACKSMITH SHOP SCHEDULES.

Crane, Front End

BOOM SUPPORT

/r<7/7tr/7d Cra/7e Goo/ 77 Supports.

4M90-2 Bend changed. Rate

Includes changing bend in front end crane boom support.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M90-12 Lengthened or shortened. Rate

Includes lengthening or shortening front end crane boom support by draw-
ing out or upsetting same.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

Per support after first one ;

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS

Crane, Front End — Boom Support

BOILER MOUNTINGS.

49

Crane, Front End

BOOM SUPPORT

4M90-13 Made. Rate

Includes getting material for front end crane boom support, forging, bend-
ing, dressing and finishing complete.

Forge.

Per first support :

1 - As per sketch No. 1

2 - As per sketch No.- 2

Per support after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M90-18 Straightened. Rate

Includes straightening old front end crane boom support when same has be-
come bent.

Forge.

Per first place repaired :

1 - As per sketch No. 1

2 - As per sketch No. 2

Per place repaired after first one ;

5- As per sketch No. 1

6- As per sketch No. 2

4M90-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane boom
support, dressing and finisliing over weld complete.

Forge.

Per first place repaired :

1 - As per sketch No. 1

2 - As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M90-21 Welded (hole plugged). Rate

Includes making plug, welding same in hole in front end crane boom support,
dressing and finishing over weld complete.

Forge :

10 - Per first hole

11- Per hole after first one

BOILER MOUNTINGS
Crane, Front End — Boom Support

50

BLACKSMITH SHOP SCHEDULES.

Crane, Front End

CARRIAGE— JAW, LOWER

/ro/?tr/7c/ Crane
Carr/o^e lotrer c/afr:

/ y

4M100-6 Dressed. Rate

Includes cutting jaw if necessary, dressing and finishing complete, front
end crane carriage lower jaw after same has been forged.

Forge.

Per first jaw :

1- When jaw is cut

2- When jaw is not cut

Per jaw after first one :

5- When jaw is cut

6- When jaw is not cut •

4M100-9 Forged. Rate.

Includes getting material, blocking out, forging front end crane carriage
lower jaw, cutting jaw if necessary, complete.

Steam hammer.

Per first jaw :

1- When jaw is cut

2- When jaw is not cut

Per jaw after first one :

5- When jaw is cut

6- When jaw is not cut

Forge.

Per first jaw :

10- When jaw is cut

11- When jaw is not cut

Per jaw after first one :

15- When jaw is cut

1 6- When jaw is not cut

BOILER MOUNTINGS

Crane, Front End — C arriage Lower Jaw

BOILER MOUNTINGS.

51

Crane, Front End

CARRIAGE— JAW, LOWER

4M100-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing front end crane carriage lower jaw complete.

Forge.

When jaw is cut out :

21- Per first jaw

22- Per jaw after first one

When jaw is not cut out :

23- Per first jaw

24- Per jaw after first one

4M100-18 Straightened. Rate...

Includes straightening lower jaw of front end crane carriage when same has
become bent.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M100-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane car-
riage lower jaw, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M100-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in front end crane carriage lower
jaw, dressing and finishing over weld complete.

Forge :

4- Per first hole

5- Per hole after first one

BOILER MOUNTINGS
Crane, Front End — Carriage Lower Jaw

52

BLACKSMITH SHOP SCHEDULES.

Crane, Front End

CARRIAGE— JAW, UPPER

/yzy?/‘ rr?c/Cnfr?e

Carnage l//jper</ah^

4M102-6 Dressed. Rate

Includes cutting jaw if necessary, dressing and finishing complete, front
end crane carriage upper jaw after same has been forged.

Forge.

Per first jaw :

1- When jaw is cut .

2- When jaw is not cut

Per jaw after first one :

5- When jaw is cut

6- When jaw is not cut

4M102-9 Forged. * Rate

Includes getting material, blocking out, forging front end crane carriage
upper jaw, cutting jaw if necessary, complete.

Steam hammer.

Per first jaw :

1- When jaw is cut

2- When jaw is not cut

Per jaw after first one :

5- When jaw is cut

6- When jaw is not cut -

Forge.

Per first jaw :

10- When jaw is cut

1 1- When jaw is not cut

Per jaw after first one :

1 5- When jaw is cut - -

16- When jaw is not cut —

BOILER MOUNTINGS

Crane, Front End — Carriage Upper Jaw

BOILER MOUNTINGS.

53

Crane, Front End

CARRIAGE— JAW, UPPER

4M102-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing front end crane carriage upper jaw complete.

Forge.

When jaw is cut out :

21- Per first jaw

22- Per jaw after first one

When jaw is not cut out :

23- Per first jaw

24- Per jaw after first one

4M102-18 Straightened. Rate

Includes straightening upper jaw of front end crane carriage when jaw has
become bent.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M102-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane car-
riage upper jaw, dressing and finislung over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one ..

4M102-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in front end crane carriage
upper jaw, dressing and finishing over weld complete.

Forge :

5- Per first hole '

6- Per hole after first one. .■

BOILER MOUNTINGS
Crane, Front End — Carriage Upper Jaw

54

BLACKSMITH SHOP SCHEDULES.

Crane, Front End

LOCK BRACKET

/Yvnt £hd Crane
locd BracKet

4M108-2 Bend changed. Rate

Includes changing bend in front end crane lock bracket.

Forge.

Per first bend changed ;

1-As per sketch No. 1

Per bend changed after first one :

5- As per sketch No. 1

4M108-12 Lengthened or shortened. Rate

Includes lengthening or shortening front end crane lock bracket by draw-
ing out or upsetting same.

Forge.

Per first bracket :

1-As per sketch No. 1

Per bracket after first one : *

5- As per sketch. No. 1

4M108-13 Made. Rate

Includes getting material for front end crane lock bracket, forging, bending,
dressing and finishing complete.

Forge.

Per first bracket :

1-As per sketch No. 1

Per bracket after first one ;

5- As per sketch No. 1

BOILER MOUNTINGS

Crane, Front End — Lock Bracket

BOILER MOUNTINGS.

55

Crane, Front End

LOCK BRACKET

4M108-18 Straightened. Rate

Includes straightening old front end crane lock bracket when same has be-
come bent.

Forge.

Per first place repaired :

1-As per sketch No. 1 .

Per place repaired after first one :

5- As per sketch No. 1

4M108-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front end crane lock
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1-As per sketch No. 1

Per place repaired after first one :

5- As per sketch No.l

4M108-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in front end crane lock bracket,
dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

BOILER MOUNTINGS
Crane, Front End — Lock Bracket

56

BLACKSMITH SHOP SCHEDULES.

Drip Pan

BRACKET

L?rp /=t?,7Bn7c/reT

4M112-2 Bend changed. Rate

Includes changing bend in drip pan bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4M112-12 Lengthened or shortened. Rate

Includes lengthening or shortening drip pan bracket by drawing out or
upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4M112-13 Made. Rate ...

Includes getting material for drip pan bracket, forging, bending, dressing
and finishing complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4M112-18 Straightened. Rate

Includes straightening old drip pan bracket when same has become bent.
Forge :

1- Per first place repaired.

2- Per place repaired after first one

4M112-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in drip pan bracket, dress-
ing and finishing over weld complete.

Forge ;

1- Per first place repaired.

2- Per place repaired after first one •

BOILER MOUNTINGS
Drip Pan Bracket

BOILER MOUNTINGS.

57

Drip Pan

BRACKET

4M112-21 Welded (crack). Rate .

Includes making dutchman, welding same in crack in drip pan bracket, dress-
ing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4M112-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in drip pan bracket, dressing
and finishing over weld complete.

^ Forge :

11 - Per first hole

12- Per hole after first one

BOILER MOUNTINGS

Drip Pan Bracket

58

BLACKSMITH SHOP SCHEDULES.

Dynamo

BRACKET

Dynamo SrocKet

4M114-2 Bend changed. Rate

Includes changing bend in dynamo bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4M114-12 Lengthened or shortened. Rate

Includes lengthening or shortening dynamo bracket by drawing out or up*
setting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4M114-13 Made. Rate

Includes getting material for dynamo bracket, forging, bending, dressing
and finishing complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4M114-13 Made (at bulldozer). Rate

Includes changing dies in bulldozer and forging complete, dynamo bracket
after iron has been cut and delivered to bulldozer.

Bulldozer :

5- Per first bracket .

6- Per bracket after first one

BOILER MOUNTINGS
Dynamo Bracket

BOILER MOUNTINGS.

59

Dynamo

BRACKET

4M114-18 Straightened. Rate

Includes straightening old dynamo bracket when same has become bent.
Forge :

1- Per first place repaired

2- Per place repaired after first one . .

4M114-21 Welded (break). Rate

Includes doing necessary scarfing, welding brake in dynamo bracket, dress-
ing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M114r-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dynamo bracket,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4M114-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dynamo bracket, dressing
and finishing over weld complete.

Forge : ♦

9-Per first hole

10-Per hole after first one

BOILER MOUNTINGS

Dynamo Bracket

60

BLACKSMITH SHOP SCHEDULES.

Fountain, Steam

BRACKET

Steam fot/nTo/n 3rac/(eT^.

o o

0

o -o

4M120-4 Cut — Iron. Rate

Includes cutting iron for steam fountain bracket at power shears.

Power shears :

1-Per bracket cut

4M120-13 Made. Rate

Includes getting material for steam fountain bracket, forging, dressing and
finishing complete.

Forge.

Per first bracket :

1-As per sketch No. 1

• 2-As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M120-18 Straightened. Rate.

Includes straightening old steam fountain bracket when same has become
bent.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS

Fountain, Steam — Bracket

BOILER MOUNTINGS.

61

Fountain, Steam
BRACKET

4M120-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in steam fountain bracket,
dressing and finishing over weld complete.

Forge.

Per first bracket :

1-As per sketch No. 2

Per bracket after first one :

5-As per sketch No. 2

4M120-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in steam fountain bracket, dress-
ing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

BOILER MOUNTINGS
Fountain, Steam — Bracket

62

BLACKSMITH SHOP SCHEDULES.

Fountain, Steam

DRY PIPE HANGER

4M126 — 2 Bend, changed. Rate

Includes changing bend in steam fountain dry pipe hanger.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M126-12 Lengthened or shortened. Rate -

Includes lengthening or shortening steam fountain dry pipe hanger by draw-
ing out or upsetting same.

Forge.

Per first hanger :

1- As per sketch No. 1 —

2- As per sketch No. 2

Per hanger after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS

Fountain, Steam — Dry Pipe Hanger

BOILER MOUNTINGS.

63

Fountain, Steam

DRY PIPE HANGER

4M126 — 13 Made. Rate

Includes getting material for stea-m fountain dry pipe hanger, forging, bend-
ing, dressing and finishing complete.

Forge.

Per first hanger :

1- As per sketch No. 1

2- As per sketch No. -2

Per hanger after first one :

5- As per sketch No. I

6- As per sketch No. 2

4M126 — 18 Straightened. Rate

Includes straightening old steam fountain dry pipe hanger when same has
become bent. *

Forge.

Per first place repaired :

1-As per sketch No. 1

5-As per sketch No. 2

Per place repaired after first one :

8- As per sketch No. 1

9- As per sketch No. 2

4M126-21 Welded (break). Rate .

Includes doing nece.ssary scarfing, welding break in steam fountain dry pipe
hanger, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2 -

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS
Fountain, Steam — Dry Pipe Hanger

64

BLACKSMITH SHOP SCHEDULES.

Fountain, Steam

DRY PIPE HANGER

4M126-21 Welded (crack). Rate -

Inoliides making dutchman. welding same in crack in steam fountain dry
pine hanger, dressing and finishing over weld complete.

Forge.

Per first place repaired :

9-As per sketch No. 1

10- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4M126-21 Welded (holes plugged). Rate. -

Includes making plug, welding same in hole in steam fountain dry pipe
hanger, dressing and finishing over weld complete.

Forge :

20- Per first hole plugged

21- Per hole plugged after first one

4M126-21 Welded (new ends). Rate.

Includes welding new end on steam fountain dry pipe hanger, dressing and
finishing end to shape complete.

Forge.

Per first end :

23- As per sketch No. 1

24- As per sketch No. 2

Per end after first one ;

27- As per sketch No. 1 — -

28- As per sketch No. 2

BOILER MOUNTINGS

Fountain, Steam — Dry Pipe Hanger

BOILER MOUNTINGS.

65

Gauge, Steam

LAMP BRACKET

3 team Gaaqe L omp Brocket 3 .

4M140 — 7 Fitted up. Rate

Includes doing necessary scarfing, fitting up steam gauge lamp bracket to
boiler head complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2 .

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M140-12 Lengthened or shortened. Rate

Includes len^hening or shortening steam gauge lamp bracket by drawing
out or upsetting same.

Forge.

Per first bracket :

1- As per sketch No.l -

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1 -

6- As per sketch No. 2

BOILER MOUNTINGS
Gauge, Steam — Lamp Bracket

66

BLACKSMITH SHOP SCHEDULES.

Gauge, Steam

LAMP BRACKET

4M140— 13 Made. Rate

Includes getting material for steam gauge lamp bracket, forging, bending,
dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M140-18 Straightened. Rate

Includes straightening old steam gauge lamp bracket when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M140-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in steam gauge lamp bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS

Gauge, Steam — Lamp Bracket

BOILER MOUNTINGS.

67

Gauge, Steam

LAMP BRACKET

4M140-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in steam gauge lamp
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4M140-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in steam gauge lamp bracket,
dressing and finishing over weld complete.

Forge :

20- Per first hole

21- Per hole after first one

4M140-21 Welded (new ends). Rate

Includes welding stock for new end on old steam gauge lamp bracket, dress-
ing and finishing end to shape complete.

Forge.

Per first end :

25- As per sketch No. 2 (large end)

26- As per sketch No. 2 (small end)

Per end after first one :

30- As per sketch No. 2 (large end)

31- As per sketch No. 2 (small end)

BOILER MOUNTINGS
Gauge, Steam — Lamp Bracket

68

BLACKSMITH SHOP SCHEDULES.

Glass, Water

LAMP BRACKET

e= =

o

/ z

4M146-2 Bend, changed. Rate

Includes changing bend in water glass lamp bracket.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M146-12 Lengthened or shortened. Rate .

Includes lengthening or shortening water glass lamp bracket by drawing out
or upsetting same.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS

Glass, Water — Lamp Bracket

BOILER MOUNTINGS.

69

Glass, Water

LAMP BRACKET

4M146-13 Made= Rate

Includes getting material for water glass lamp bracket, forging, bending,
dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M146-18 Straightened. Rate

Includes straightening old water glass lamp bracket when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after' first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M146-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in water glass lamp bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS
Glass, Water — Lamp Bracket

70

BLACKSMITH SHOP SCHEDULES.

Glass, Water

LAMP BRACKET

4M146-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in water glass lamp
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

9-As per sketch No. 1

10-As per sketch No. 2

Per place repaired after first one :

12- As per sketch No. 1 ,

13- As per sketch No. 2

4M146-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in water glass lamp bracket,
dressing and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2

Per hole after first one :

25- As per sketch No.l

26- As per sketch No. 2

4M146-21 Welded (new bottom end). Rate

Includes welding stock for new bottom end on water glass lamp bracket,
dressing and finishing to shape complete.

Forge.

Per first end :

30-As per sketch No. 1

Per end after first one :

33- As per sketch No. 1

BOILER MOUNTINGS

Glass, Water — Lamp Bracket

BOILER MOUNTINGS.

71

Hand Rail

POST BRACKET

/Ti7/7C//?C7//

Post 3roc/(eT

4M160-2 Bend changed. Rate

Includes changing bend in hand rail post bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4M160-13 Made. Rate

Includes getting material for hand rail port bracket, forging, bending, dress-
ing, and finishing complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4M160-18 Straightened. Rate

Includes straightening old hand rail post bracket when same has become bent
or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

4M160-21 Welded (break). Rate ..

Includes doing necessary scarfing, welding break in hand rail post bracket,
dressing and Wishing over weld complete.

Forge :

1- Per first place repaired ,

2- Per place repaired after first one

BOILER MOUNTINGS.

Hand Rail Post Bracket

72

BLACKSMITH SHOP SCHEDULES.

Hand Rail

POST BRACKET

4M160-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in hand rail post bracket,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one :

4M160-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in hand rail post bracket, dress-
ing and finishing over weld complete.

Forge :

10- Per first hole

11- Per hole after first one

BOILER MOUNTINGS
Hand Rail Post Bracket

BOILER MOUNTINGS.

73

Headlight

STEP BRACKET

4M168-2 Bend changed. , Rate

Includes changing bend in headlight step bracket.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 2 .

4M168-7 Fitted up. Rate..

Includes getting new or old headlight step bracket, heating, and fitting same
to boiler complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4M168-13 Made. Rate

Includes getting material for headlight step bracket, forging, bending, dress-
ing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS

Headlight Step Bracket

74

BLACKSMITH SHOP SCHEDULES.

Headlight

STEP BRACKET

4M168-18 Straightened. Rate

Includes straightening old headlight step bracket when same has become
bent.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M168-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in headlight step bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1 ■

6- As per sketch No. 2

4M168-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in headlight step bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4M168-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in headlight step bracket,
dressing and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

2 1- As per sketch No. 2

Per hole after first one :

25- As per sketch No. 1

26- As per sketch No. 2

BOILER MOUNTINGS
Headlight Step Bracket

BOILER MOUNTINGS.

75

Injector

BRACKET

/ >2

4M176-2 Bend changed. Rate

Includes changing bend in injector bracket.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2 . . . ;

Per bend changed after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M176-13 Made. Rate

Includes getting material for injector bracket, forging, bending, dressing
and finishing complete.

Forge.

Per first bracket ;

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M176-18 Straightened. Rate

Includes straightening old injector bracket when same has become bent.
Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 .

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2 _

%

BOILER MOUNTINGS

Injector Bracket

76

BLACKSMITH SHOP SCHEDULES.

Injector

BRACKET

4M176-21 Welded (break). Rate ...

Includes doing necessary scarfing, welding break in injector bracket, dress-
ing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M176-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in injector bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4M176-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in injector bracket^ dressing
and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1 -

21- As per sketch No. 2

Per hole after first one :

25- As per sketch No.l

26- As per sketch No. 2

#

BOILER MOUNTINGS
Injector Bracket

Lubricator, Air Pump
BRACKET

BOILER MOUNTINGS.

77

/7/rFi//7?p li/dr/caror 6rocf^et

4M190-2 Bend changed. Rate

Includes changing bend in air pump lubricator bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4M190-12 Lengthened or shortened. Rate

Includes lengthening or shortening air pump lubricator bracket by drawing
out or upsetting same.

Forge : /

1- Per first bracket

2- Per bracket after first one

4M190-13 Made. Rate

Includes getting material for air pump lubricator bracket, forging, bending,
dressing and finishing complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4M190-18 Straightened. Rate

Includes straightening old air pump lubricator bracket when same has be-
come bent or twisted.

Forge :

1- Per first place repaired

2- Per place repaired after first one

BOILER MOUNTINGS
Lubricator, Air Pump — Bracket

78

BLACKSMITH SHOP SCHEDULES.

Lubricator, Air Pump
BRACKET

4M190-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in air pump lubricator
bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M190-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in air pump lubricator
bracket, dressing and finishing over weld complete.

Forge :

5- Per first place repaired >

6- Per place repaired after first one

4M190-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in air pump lubricator bracket,
dressing and finishing over weld complete.

Forge :

10- Per first hole

11- Per hole after first one

BOILER MOUNTINGS

Lubricator, Air Pump — Bracket

Lubricator, Flange
BRACKET

BOILER MOUNTINGS.

79

Flange Lubricator Bracket

4M194-2 Bend changed. Rate

Includes changing bend in flange lubricator bracket .

Forge :

1- Per first bend changed

2- Per bend changed after first one

4M194-12 Lengthened or shortened. Rate

Includes lengthening or shortening flange lubricator bracket by drawing
out or upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one ..

BOILER MOUNTINGS
Lubricator, Flange — Bracket

80

BLACKSMITH SHOP SCHEDULES.

Lubricator, Flange
BRACKET

4M194-13 Made. Rate

Includes getting material for flange lubraictor bracket, forging, bending,
dressing and finishing complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4M194-18 Straightened. Rate

Includes straightening old flange lubricator bracket when same has be-
come bent or twisted.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M194-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in flango,lubricator bracket,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4M194-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in flange lubricator
bracket, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one ,

4M194-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in flange lubricator bracket,
dressing and finishing over weld complete.

Forge :

10- Per first hole :

1 1- Per hole after first one

BOILER MOUNTINGS

Lubricator, Flange — Bracket

BOILER MOUNTINGS.

81

Lubricator, Main
BRACKET

Main Lubricator Brackets

m

4M200-2 Bend changed.

Includes changing bend in main lubricator bracket.

Forge.

Per first bend changed :

1- As per sketch No. 2

2- As per sketch No. 3

3- As per sketch No. 4

Per bend changed after first one :

7- As per sketch No. 2

8- As per sketch No. 3

9- As per sketch No. 4

4M200-4 Cut — Iron. Rate.

Includes cutting iron for main lubricator bracket at power shears.
Power shears :

1-Per bracket cut

4M200-4 Cut and ground. Rate

Includes cutting iron for main lubricator bracket at power shears and grind-
ing ends of bracket at emery wheel.

Power shears and emery wheel :

5- Per first bracket

6- Per bracket after first one

BOILER MOUNTINGS
Lubricator, Main — Bracket

82

BLACKSMITH SHOP SCHEDULES.

Lubricator, Main
BRACKET

4M200-12 Lengthened or shortened. Rate

Includes lengthening or shortening main lubricator bracket by drawing out
or upsetting same.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4 .

Per bracket after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10- As per sketch No. 4

4M200-13 Made. Rate

Includes getting material for main lubricator bracket, forging, bending,
dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4 .

Per bracket after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

4M200-18 Straightened. Rate

Includes straightening old main lubricator bracket when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 .

3- As per sketch No. 3

4- As per sketch No. 4

Per place repaired after first one :

7- As per sketch No. 1 - .

8- As per sketch No. 2. . .

9- As per sketch No. 3

10-As per sketch No. 4

BOILER MOUNTINGS

Lubricator, Main — Bracket

BOILER MOUNTINGS.

83

Lubricator, Main

BRACKET

4M200-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in main lubricator bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per place repaired after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

4M200-21 Welded (crack). Rate ...

Includes making dutchman, welding same in crack in main lubricator bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired ;

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3

23- As per sketch No. 4

Per place repaired after first one :

27- As per sketch No. 1

28- As per sketch No. 2

29- As per sketch No. 3

30- As per sketch No. 4

4M200-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in main lubricator bracket,
dressing and finishing over weld complete.

Forge.

Per first hole :

35- As per sketch No. 1

36- As per sketch No. 2 .

37- As per sketch No. 3

38- As per sketch No. 4

Per hole after first one :

40- As per sketch No.l

41- As per sketch No. 2 ....

42- As per sketch No. 3. . . .

43- As per sketch No. 4

BOILER MOUNTINGS
Lubricator, Main — Bracket

84

BLACKSMITH SHOP SCHEDULES.

Running Board
BRACKET

/funn/n^ Board 3rac/^et3

Includes changing bend in running board bracket.
Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 4

4- As per sketch No. 5

5- As per sketch No. 6

BOILER MOUNTINGS
Running Board Bracket

BOILER MOUNTINGS.

85

Running Board
BRACKET

Per bend changed after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 4

13- As per sketch No. 5

14- As per sketch No. 6

4M300-4 Cut — Iron. Rate

Includes cutting iron for running board bracket at power shears.

Power shears :

Per first bracket :

1-As per sketch No. 3

Per bracket after first one :

5- As per sketch No. 3

4M30Q-7 Fitted up. Rate

Includes heating, bending and fitting up running board bracket to boiler
complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4 ..

5- As per sketch No. 5

6- As per sketch No. 6

Per bracket after first one : ,

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

4M300-9 Forged Iron. Rate

Includes getting material and forging out iron for running board bracket
complete, ready for finishing.

Steam hammer :

1- Per first bracket

2- Per bracket after first one

Forge :

3- Per first bracket

-1-Per bracket after first one

BOILER MOUNTINGS

Running Board Bracket

86

BLACKSMITH SHOP SCHEDULES.

Running Board
BRACKET

4M300-12 Lengthened or shortened. Rate

Includes lengthening or shortening running board bracket by drawing out or
upsetting same.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 4

4- As per sketch No. 5

5- As per sketch No. 6

Per bracket after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 4

13- As per sketch No. 5

14- As per sketch No. 6

4M300-13 Made. Rate

Includes getting material for running board bracket, forging out ends, bend-
ing, dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3, cut from angle iron .

4- As per sketch No. 4 .

5- As per sketch No. 5

6- As per sketch No. 6

Per ^bracket after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3, cut from angle iron

13- As per sketch No. 4

14- As per sketch Np. 5

15- As per sketch No. 6

4M300-13 Made (after iron is forged or from bar iron). Rate

Includes getting iron for running board bracket after same has been forged,
doing necessary bending, dressing and finishing bracket to shape complete.

Forge.

Per first bracket :

20- As per sketch No. 1

2 1- As per sketch No. 2

22- As per sketch No. 4

23- As per sketch No. 5

24- As per sketch No. 6

BOILER MOUNTINGS
Running Board Bracket

BOILER MOUNTINGS.

87

Running Board
BRACKET

Per bracket after first one :

30- As per sketch No.l

31- As per sketch No. 2

32- As per sketch No. 4

33- As per sketch No. 5

34- As per sketch No. 6

4M300-18 Straightened. Rate

Includes straightening old running board bracket when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per place repaired after first one :

10- As per sketch No. 1

11- As per sketch No. 2 . . .

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

4M300-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in running board bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 4

4- As per sketch No. 5

5- As per sketch No. 6

Per place repaired after first one :

• 10-As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 4

13- As per sketch No. 5

14- As per sketch No. 6

BOILER MOUNTINGS

Running Board Bracket

88

BLACKSMITH SHOP SCHEDULES.

Running Board
BRACKET

4M300-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in running board bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 4 .

23- As per sketch No. 5

24- As per sketch No. 6

Per place repaired after first one :

30- As per skfetch No. 1

31- As per sketch No. 2

32- As per sketch No. 4

33- As per sketch No. 5

34- As per sketch No. 6

4M300-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in running board bracket, dress-
ing and finishing over weld complete.

Forge :

40- Per first hole

41- Per hole after first one . .

4M300-21 Welded (new ends). Rate

Includes welding stock on old running board bracket for new end, dressing
and finishing end to shape complete.

Forge.

Per first end :

45- As per sketch No. 1

46- As per sketch No. 2

47- As per sketch No. 4

48- As per sketch No. 5

49- As per sketch No. 6 .

Per end after first one :

55- As per sketch No.l

56- As per sketch No. 2

57- As per sketch No. 4 .

58- As per sketch No. 5

59- As per sketch No. 6

BOILER MOUNTINGS
Running Board Bracket

BOILER MOUNTINGS.

89

Throttle

LEVER

77?ro^//e ^eyer

~pS i —

T/?ro///e leyer

4M400-6 Dressed. Rate...

Includes bending, dressing and finishing throttle lever complete, after same
has been forged.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

Per lever after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M400-9 Forged. Rate

Includes getting material, blocking out and forging throttle lever complete,
ready for dressing.

Steam hammer.

Per first lever :

1- As per sketch No. I

2- As per sketch No. 2

Per lever after first one :

5- As per sketch No.l

6- As per sketch No. 2 •

Forge.

Per first lever :

10- As per sketch No. 1

11- As per sketch No. 2

Per lever after first one :

15- As per sketch No. 1

16- As per sketch No. 2

BOILER MOUNTINGS

Throttle Lever

90

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER

4M400-9 Forged and dressed. Rate

Includes getting material for throttle lever, blocking out, forging, dressing
and finishing complete.

Forge.

Per first lever :

20- As per sketch No.l

21- As per sketch No. 2

Per lever after first one :

26- As per sketch No.l

27- As per sketch No. 2

4M400-12 Lengthened or shortened. Rate

Includes lengthening or shortening throttle lever by drawing out or up-
setting same.

Forge.

Per first lever :

1- As per sketch No.l

2- As per sketch No. 2

Per lever after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M400-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in throttle lever, dressing
and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 -

Per place repaired after first one : •

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS
Throttle Lever

BOILER MOUNTINGS.

91

Throttle

LEVER

4M400-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in throttle lever, dressing
and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No.l

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1 . . .*

16- As per sketch No. 2

4M400-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever, dressing and
finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2. , .

Per hole after first one :

25- As per sketch No.l

26- As per sketch No. 2

4M400-21 Welded (new ends). Rate

Includes making ends, welding new stock on ends of throttle lever, dressing
and finishing end to shape complete.

Forge.

Per first end :

30- As per sketch No. 1 (boss end)

31- As per sketch No. 1 (handle end)

32- As per sketch No. 2 (round end)

33- As per sketch No. 2 (handle end)

Per end after first one :

40- As per sketch No. 1 (boss end)

41- As per sketch No. 1 (handle end)

42- As per sketch No. 2 (round end)

43 - As per sketch No. 2 (handle end) ...

BOILER MOUNTINGS

Throttle Lever

92

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER CONNECTION

r/?roI//e Leper Cor?nect/on

C® ®

/

TL?rott/e Leper Connect/ on

z.

4M420-4 Cut — Iron. Rate

Includes cutting iron for throttle lever connection at power shears.

Power shears :

1-Per piece cut

4M420-4 Cut and ground. Rate

Includes cutting iron for throttle lever connection at power shears and
grinding ends of same on emery wheel to shape complete.

Power shears and emery wheel.

Per first throttle connection :

5-As per sketch No. 1 .•

Per throttle connection after first one :

7- As per sketch No. 1

4M420-12 Lengthened or shortened. Rate

Includes lengthening or shortening throttle lever connection by drawing out
or upsetting same.

Forge.

Per first connection :

1- As per sketch No.l

2- As per sketch No. 2 !

Per connection after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS

Throttle Lever Connection

BOILER MOUNTINGS.

93

Throttle

LEVER CONNECTION

4M429-13 Made. Rate....

Includes getting material for throttle lever connection, forging, bending,
dressing and finishing complete.

Forge.

Per first connection :

1- As per sketch No.l

2- As per sketch No. 2

Per connection after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M420-18 Straightened. Rate.

Includes straightening old throttle lever connection when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2 _

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M420-21 Welded (break). Rate .

Includes doing necessary scarfing, welding break in throttle lever connection^
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS
Throttle Lever Connection

94

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER CONNECTION

4M420-21 Welded (crack). Rate..

Includes making dutchman, welding same in crack in throttle lever con-
nection, dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketQh No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4M42C-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever, connection,
dressing and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2 ...

Per hole after first one :

25- As per sketch No. 1

26- As per sketch No. 2

4M420-21 Welded (new jaw end) (making included). Rate

Includes getting material and forging new jaw end for throttle lever con-
nection, welding same on old connection, dressing and finishing end com-
plete.

Forge.

Per first end :

30- As per sketch No. 2

Per end after first one :

31- As per sketch No. 2

4M420-21 Welded (new jaw end) (making not included). Rate

Includes getting new jaw end of throttle lever connection after same has
been made, doing necessary scarfing, welding end on connection, dressing
and finishing over weld complete.

Forge.

Per first end :

35-As per sketch No. 2

Per end after first one :

37- As per sketch No. 2

BOILER MOUNTINGS

Throttle Lever Connection

BOILER MOUNTINGS.

95

.Throttle

LEVER CONNECTION

4M420-21 Welded (new rounded end). Rate

Includes welding stock on rounded end of throttle lever connection, dress-
ing and finishing end to shape complete.

Forge.

Per first end :

40- As per sketch No. 1

Per end after first one :

43-As per sketch No. 1

BOILER MOUNTINGS
Throttle Lever Connection

96

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER CONNECTION, END, JAW

4M422-13 Made. Rate

Includes getting material for throttle lever connection jaw end, blocking
out, forging, dressing and finishing complete.

Forge.

Per first end :

1-As per sketch No. 2

Per end after first one :

5-As per sketch No. 2

BOILER MOUNTINGS

Throttle Lever Connection Jaw End

BOILER MOUNTINGS.

97

Throttle

LEVER FULCRUM

T/ 7 roWe leyer/2//cri//?73.

/

3 .

4M460-2 Bend changed.

Rate.

Includes changing bend in throttle lever fulcrum.
Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M460-4 Cut — Iron. Rate.

Includes cutting iron for throttle lever fulcrum at power shears.

Includes lengthening or shortening throttle lever fulcrum by drawing out
or upsetting same.

Forge.

Per first fulcrum :

1- As per- sketch No. 1

2- As per sketch No. 2

Per fulcrum after first one :

5- As per sketch No.l

6- As per sketch No. 2

Power shears :
1-Per fulcrum

4M460-12 Lengthened or shortened.

Rate.

BOILER MOUNTINGS

Throttle Lever Fulcrum

98

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER FULCRUM

4M450-13 Made. Rate

Includes getting material for throttle lever fulcrum, forging, bending, dress-
ing and finishing complete.

Forge.

Per first fulcrum :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per fulcrum after first one :

10- As per sketch No. 1

11- As per sketch No, 2

12- As per sketch No, 3

13- As per sketch No. 4

4M450-18 Straightened. Rate

Includes straightening old throttle lever fulcrum when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per place repaired after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

4M450-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in throttle lever fulcrum,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS
Throttle Lever Fulcrum

BOILER MOUNTINGS.

99

Throttle

LEVER FULCRUM

4M450-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in throttle lever fulcrum,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

Per place repaired after first one :

17- As per sketch No. 1

18- As per sketch No. 2. .

19- As per sketch No. 3

20- As per sketch No. 4

4M460-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever fulcrum, dress-
ing and finishing over weld complete.

Forge.

Per first hole plugged ;

25- As per sketch No.l

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4

Per hole plugged after first one :

35- As per sketch No. 1

36- As per sketch No.2

37- As per sketch No. 3

38- As per sketch No. 4

BOILER MOUNTINGS

Throttle Lever Fulcrum

100

BLACKSMITH SHOP SCHEDULES,

Throttle

LEVER FULCRUM LINK

T/irott/e Letter ra/crumUnK

/

T/7n^tl/eLeKerfl//criJJ7?L/nn.

z.

T/iroWe L ey'erra/cramUnK

4M464-12 Lengthened or shortened. Rate

Includes lengthening or shortening throttle lever fulcrum link by drawing
out or upsetting same.

Forge.

Per first link :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per link after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M464-13 Made. Rate

Includes getting material for throttle lever fulcrum link, forging, making
jaws, dressing and finishing complete.

Forge.

Per first link :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per link after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS

Throttle Lever Fulcrum Link

BOILER MOUNTINGS.

101

Throttle

LEVER FULCRUM LINK

4M464-18 Straightened. Rate ,

Includes straightening old throttle lever fulcrum link when same has be-
come bent.

Forge.

Per first link :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per link after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M454-21 Welded (break). Rate.

Includes doing necessary scarfing, welding break in throttle lever fulcrum
link, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No.. 2

7- As per sketch No. 3

4M454-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in throttle lever fulcrum
link, dressing and finishing over weld complete.

Forge.

N Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

BOILER MOUNTINGS
Throttle Lever Fulcrum Link

102

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER FULCRUM LINK

4M464-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever fulcrum link,
dressing and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3

Per hole after first one :

26- As per sketch No. 1

27- As per sketch No. 2 .

28- As per sketch No. 3

4M454-21 Welded (new jaw end) (making included). Rate

Includes getting material, forging new jaw end for throttle lever fulcrum
link, doing necessary scarfing, welding end on link, dressing and finishing
complete.

Forge.

Per first end :

36- As per sketch No. I

37- As per sketch No. 3

Per end after first one :

42-As per sketch No. 1

44-As per sketch No. 3

4M464-21 Welded (new jaw end) (making not included). Rate

Includes getting new jaw end after same has been made, doing necessary
scarfing, welding end on old throttle lever fulcrum link, dressing and finish-
ing over weld complete.

Forge.

Per first end :

50- As per sketch No. 1

51- As per sketch No. 3

Per end after first one :

56- As per sketch No. 1

57- As per sketch No. 3

4M464-21 Welded (new rounded end). Rate

Includes welding stock on throttle lever fulcrum link end, dressing and fin-
ishing end complete.

Forge :

60- Per first rounded end

61- Per rounded end after first one

BOILER MOUNTINGS

Throttle Lever Fulcrum Link

BOILER MOUNTINGS.

103

Throttle

LEVER FULCRUM LINK— END, JAW

4M466-13 Made. Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, throttle lever fulcrum link jaw end.

Forge.

Per first jaw end :

1- As per sketch No. 1

2- As per sketch No. 3

Per jaw end after first one :

3- As per sketch No. 1

4- As per sketch No. 3

BOILER MOUNTINGS
Throttle Lever Fulcrum Link, Jaw End

104

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER HANDLE

T/?roMelekerIfanc//e

4M466-13 Made complete. Rate

Includes getting material for throttle lever handle, blocking out, forging,
dressing and finishing complete.

Forge :

1- Per first handle

2- Per handle after first one

4M466-18 Straightened. Rate

Includes straightening old throttle lever handle when same has become bent
or twisted.

Forge :

1- Per first handle

2- Per handle after first one

4M466-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever handle, dress-
ing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one -

BOILER MOUNTINGS
Throttle Lever Handle

BOILER MOUNTINGS.

105

Throttle

LEVER LATCH

T/?rott/e Leyer/.ofc/?e>s

ozo

/

T/iroTt/e Ley'erloTc^es

4M476-0 Annealed. Rate .

Includes annealing throttle lever latch.

Per first latch :

1- When annealed at forge

2- When annealed at case-hardening furnace

Per latch after first one :

5- When annealed at forge

6- When annealed at case-hardening furnace

4M476-5 Case-hardened. Rate

Includes case-hardening throttle lever latch complete.

Per first latch :

1- When case-hardened at forge

2- When case-hardened at case-hardening furnace without

box

3- When case-hardened at case-hardening furnace with box,

Per latch after first one :

7- When case-hardened at forge

8- When case-hardened at case-hardening furnace without

box

9- When case-hardened at case-hardening furnace with box,

BOILER MOUNTINGS

Throttle Lever Latch

106

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER LATCH

4M476-13 Made. Rate

Includes getting material for throttle lever latch, blocking out, forging,
dressing and finishing complete.

Steam hammer.

Per first latch :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per latch after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

Forge.

Per first latch :

14- As per sketch No.l.

15- As per sketch No. 2

16- As per sketch No. 3

17- As per sketch No. 4

Per latch after first one :

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3

23- As per sketch No. 4

4M476-18 Straightened. Rate

Includes straightening old throttle lever latch when same has become bent.
Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 --

3- As per sketch No. 3.

4- As per sketch No. 4 ,

Per place repaired after first one :

8- As per sketch No. 1 -

9- As per sketch No. 2 -

10- As per sketch No. 3

11- As per sketch No. 4 -

BOILER MOUNTINGS
Throttle Lever Latch

BOILER MOUNTINGS.

107

Throttle

LEVER LATCH

4M476-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever latch, dressing
and finishing over weld complete.

Forge.

. Per first hole :

1- As per sketch No. 2

2- As per sketch No. 4

Per hole after first one :

5- As per sketch No. 2

6- As per sketch No. 4

BOILER MOUNTINGS

Throttle Lever Latch

108

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER LATCH BOX

T^rott/eLei^erlarch Box

'/ a..

4M478-0 Annealed. Rate

Includes annealing throttle lever latch box.

Per first latch box :

1- When annealed at forge

2- When annealed at case-hardening furnace

Per latch box after first one :

5- When annealed at forge

6- When annealed at case-hardening furnace

4M478-5 Case-hardened. Rate..

Includes case-hardening throttle lever latch box.

Per first latch box :

1- When case-hardened at forge ;

2- When case-hardened at case-hardening furnace without

box

3- When case-hardened at case-hardening furnace with box,

Per latch box after first one :

7- When case-hardened at forge

8- When case-hardened at case-hardening furnace without

box

9- When case-hardened at case-hardening furnace with box,

4M478-13 Made. Rate

Includes getting material for throttle lever latch box, blocking out, forging,
dressing and finishing complete.

Forge.

Per first box :

1- As per sketch No. 1

2- As per sketch No. 2

Per box after first one :

.5-As per sketch No. 1

6 -As per sketch No. 2

BOILER MOUNTINGS

Throttle Lever Latch Box

BOILER MOUNTINGS.

109

Throttle

LEVER LATCH BOX

4M478-18 Straightened. Rate

Includes straightening old throttle lever latch box when same has become
bent.

Forge.

Per latch box repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per latch box repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M478-21 Welded (crack). Rate .

Includes making dutchman, welding same in crack in throttle lever latch box,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1 ! .

2- As per sketch No. 2

Per place repaired after first one : f

5- As per sketch No. 1 ^

6- As per sketch No. 2

4M478-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever latch box,
dressing and finishing over weld complete.

Forge :

10- Per first hole plugged

11- Per hole plugged after first one

BOILER MOUNTINGS
Throttle Lever Latch Box

no

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER LATCH ROD

T/?roWeley^rLatch fiod

'q>.

/

WrotHe Leper Lofc/7 ffod
( o

4M490-2 Bend changed. Rate

Includes changing bend in throttle lever latch rod.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M490-4 Cut — Iron. Rate

Includes cutting iron for throttle lever latch rod at power shears.

Power shears :

1-Per rod

4M490-4 Cut and ground. Rate

Includes cutting iron for throttle lever latch rod at power shears, grinding
ends of same at emery wheel.

Power shears and emery wheel :

.5-Per first rod

6-Per rod after first one

BOILER MOUNTINGS

Throttle Lever Latch Rod

BOTLER MOUNTINGS.

Ill

Throttle

LEVER LATCH ROD

4M490-12 Lengthened or shortened. Rate

Includes lengthening or shortening throttle lever latch rod by drawing out or
upsetting same.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M490-13 Made. Rate

Includes getting material for throttle lever latch rod, forging, dressing and
finishing complete.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M490-18 Straightened. Rate..

Includes straightening old throttle lever latch rod when same has become
bent.

Forge.

Per first place repaired :

1-As per sketch No.l

2t-As per sketch No. 2

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS
Throttle Lever Latch Rod

112

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER QUADRANT

T/irvWe leper Quadrant

TQrotUe Leper Quadrant

T/?rott/e Leper Quadrant

4M600-0 Annealed. Rate.

Includes annealing throttle lever quadrant complete.

Per first quadrant :

1- When annealed at forge

2- l^hen annealed at case-hardening furnace

Per quadrant after first one :

5- When annealed at forge

6- When annealed at> case-hardening furnace

BOILER MOUNTINGS

Throttle Lever Quadrant

BOILER MOUNTINGS.

113

Throttle

LEVER QUADRANT

4M600-6 Case-hardened. Rate .

Includes case-hardening throttle lever quadrant complete.

Per first quadrant :

1- When case-hardened at forge

2- When case-hardened at case-hardening furnace without

box ...

3- When case-hardened at case-hardening furnace with box, ..

Per quadrant after first one :

7- When case-hardened at forge

8- When case-hardened at case-hardening furnace without

box ..

9- When case-hardened at case-hardening furnace with box,

4M600-13 Made. Rate

Includes getting material for throttle lever quadrant, blocking out, forging,
dressing and finishing complete.

Forge.

Per first quadrant :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per quadrant after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4M600-18 Straightened. Rate

Includes straightening old throttle lever quadrant when same has become*
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1 .

2- As per sketch No. 2 .

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS

Throttle Lever Quadrant

114

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER QUADRANT

4M600-21 Welded (crack). * Rate

Includes making dutchman, welding same in crack in throttle lever quadrant,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M600-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever quadrant,
dressing and finishing over weld complete.

Forge.

Per first hole :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

Per hole after first one :

16- As per sketch No. 1

17- As per sketch No. 2

18- As per sketch No. 3 ‘

BOILER MOUNTINGS

Throttle Lever Quadrant

BOILER MOUNTINGS.

115

Throttle

LEVER QUADRANT, BRACKET

. / z s

4M502-2 Bend changed. Rate

Includes changing bend in throttle lever quadrant bracket.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per bend changed after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4M502-13 Made. Rate

Includes getting material for throttle lever quadrant bracket, forging, bend-
ing, dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per bracket after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS
Throttle Lever Quadrant Bracket

116

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER QUADRANT, BRACKET

4M502-18 Straightened. Rate

Includes straightening old throttle lever quadrant bracket when same has
become bent or twisted.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. ,3

Per place repaired after first one ;

7- As per sketch No. 1

8- As per sketch No. 2 •

9- As per sketch No. 3

4M602-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in throttle lever quadrant
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one •

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M502-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever quadrant
bracket, dressing and finishing over weld complete.

Forge.

Per first

hole :

15-As

per sketch

No.

1

16-As

per sketch

No.

2

17-As

per sketch

No.

3

Per hole

after first one :

21-As

per sketch

No.

1

22-As

per sketch

No.

2

23-As

per sketch

No.

3

BOILER MOUNTINGS

Throttle Lever Quadrant Bracket

BOILER MOUNTINGS.

117

Throttle

LEVER STEM

4M616 See schedules for Throttle Stem, under Steam and Dry Pipes.

BOILER MOUNTINGS

Throttle Lever Stem

118

BLACKSMITH SHOP SCHEDULES.

Throttle

LEVER SUPPORT

Thrott/e Letter Support

Thrott/e Lerer Support

/8

4M5 18-12 Lengthened or shortened. Rate

Includes lengthening or shortening throttle lever support by drawing out
or upsetting same.

Forge.

Per first support :

1- As per sketch No.l

2- As per sketch No. 2

Per support after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M518-13 Made. Rate

Includes getting material for throttle lever support, forging, bending, dress-
ing and finishing complete.

Forge.

Per first support :

1- As per sketch No. 1 .

2- As per sketch No. 2

Per support after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER MOUNTINGS
Throttle Lever Support

BOILER MOUNTINGS.

119

Throttle

LEVER SUPPORT

4M618-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in throttle lever support,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1 . ...

2- As per sketch No. 2

Per place repaired after first one ; ^

5- As per sketch No. 1

6- As per sketch No. 2

4M618-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in throttle lever support,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

Per place repaired after first one :

16- As per sketch No. 1

17- As per sketch No. 2

4M518-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in throttle lever support, dress-
ing and finishing over weld complete.

Forge. •

Per first hole :

22- As per sketch No. 1

23- As per sketch No. 2

Per hole after first one :

28- As per sketch No. 1

29- As per sketch No. 2

BOILER MOUNTINGS

Throttle Lever Support

120

BLACKSMITH SHOP SCHEDULES.

Wheel

COVER BRACKET

4M550-2 Bend changed.

Includes changing bend in wheel cover bracket.
Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per bend changed after first one :

8- As per sketch No.l

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

Rate.

4M550-4 Cut — Iron. Rate

Includes cutting iron for wheel cover bracket at power shears.

Power shears :

1-Per piece cut

BOILER MOUNTINGS
Wheel Cover Bracket

BOILER MOUNTINGS.

121

Wheel

COVER BRACKET

4M660-13 Made. , Rate .

Includes getting material for wheel cover bracket, forging, bending, dress-
ing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per bracket after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

4M550-18 Straightened. Rate

Includes straightening old wheel cover bracket when same has become bent .
Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 . .

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per place repaired after first one :

10- As per sketch No.l

11- As per sketch No. 2. . .

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

BOILER MOUNTINGS

Wheel Cover Bracket

122

BLACKSMITH SHOP SCHEDULES.

Wheel

COVER BRACKET

4M650-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in wheel cover bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 .

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per place repaired after first one :

10- As per sketch No. 1

11- As per sketch No 2 :

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

4M650-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in wheel cover bracket, dress-
ing and finishing over weld complete.

Forge :

20- Per first hole

2 1- Per hole after first one

BOILER MOUNTINGS
Wheel Cover Bracket

BOILER MOUNTINGS.

123

Whistle

VALVE ARM

4M560-2 Bend changed. Rate

Includes changing bend in whistle valve arms .

Forge.

Per bend :

1-As per sketch No.l

4M560-12 Lengthened or shortened. Rate

Includes lengthening or shortening whistle valve arm by drawing out or
upsetting same.

Forge. •

Per first arm :

1- As per sketch No. 1

2- As per sketch No. 2

Per arm after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4M660-13 Made complete. Rate

Includes getting material for whistle valve arm, blocking out, forging, dress-
ing and finishing complete.

Forge.

Per first arm :

1- As per sketch No. 1

2- As per sketch No. 2

Per arm after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS^

Whistle Valve Arm

124

BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE ARM

4M660-18 Straightened. Rate

Includes straightening old whistle valve arm when same has become bent or
twisted.

Forge :

1- Per first arm •

2- Per arm after first one

4M660-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in whistle valve arm,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1 ...

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M660-21 Welded (crack). Rate .

Includes making dutchman, welding same in crack in whistle valve arm,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No.l

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4M560-21 Welded (holes plugged). Rate .

Includes making plug, welding same in hole in whistle valve arm, dressing
and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2, flat end

22- As per sketch No. 2, boss end .

Per hole after first one : '

26- As per sketch No.l

27- As per sketch No. 2, flat end .

28- As per sketch No. 2, boss end

BOILER MOUNTINGS
* Whistle Valve Arm

BOILER MOUNTINGS.

125

Whistle

VALVE ARM

4M660-21 Welded (new end) . Rate

Includes getting material, welding necessary stock on end of whistle valve
arm, dressing and finishing end complete.

Forge :

30- Per first end /

31- Per end after first one

BOILER MOUNTINGS

Whistle Valve Arm

126

BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE LEVER

t//?/5t/eP&/yeley'er

4M664^2 Bend changed. Rate

Includes changing bend in whistle valve lever.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per bend changed after first one :

7- As per sketch No.l '

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS
Whistle Valve Lever

BOILER MOUNTINGS.

127

Whistle

VALVE LEVER

4M664-12 Lengthened or shortened. Rate

Includes lengthening or shortening whistle valve lever by drawing out or
upsetting same.

Forge.

Per first place lengthened or shortened :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place lengthened or shortened after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M564-13 Made. Rate

Includes getting material for whistle valve lever, forging, bending, dressing
and finishing complete.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per lever after first one :

8- As per sketch No.l

9- As per sketch No, 2

10-As per sketch No. 3

4M564-18 Straightened. Rate

Includes straightening old whistle valve lever when same has become bent
or twisted.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No, 1

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS

Whistle Valve Lever

128

BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE LEVER

4M664-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in whistle valve lever,,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1 .

2- As per sketch No. 2

3- As per sketch No. 3 ....

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4M664-21 Welded (crack). Rate

Includes making diitchman, welding same in crack in whistle valve lever,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No.l

13- As per sketch No. 2

14- As per sketch No. 3

Per place repaired after first one :

17- As per sketch No. 1

18- As per sketch No. 2 •

19- As per sketch No. 3

4M664-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in whistle valve lever, dressing
and finishing over weld complete.

Forge.

Per first hole :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

Per hole after first one :

30- As per sketch No. 1 -

31- As per sketch No. 2

32- As per sketch No. 3

BOILER MOUNTINGS
Whistle Valve Lever

BOILER MOUNTINGS.

129

Whistle

VALVE LEVER

4M564-21 Welded (new rounded ends). Rate

Includes welding new stock on rounded ends of old whistle valve lever,
dressing and finishing to shape complete.

Forge.

Per first end :

37- As per sketch No.l

38- As per sketch No. 2

39- As per sketch No. 3

Per end after first one :

45- As per sketch No.l

46- As per sketch No. 2

47- As per sketch No. 3

/

BOILER MOUNTINGS

Whistle Valve Lever

130 BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE— LEVER, HAND

o

4M666-6 Dressed. Rate

Includes dressing and finishing whistle valve hand lever complete after same
has been forged.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per lever after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4M566-9 Forged. Rate. .

Includes getting material, blocking out and forging whistle valve hand lever
complete, ready for dressing.

Steam hammer.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2 -----

3- As per sketch No. 3

BOILER MOUNTINGS

Whistle Valve Hand Lever

BOILER MOUNTINGS.

131

Whistle

VALVE— LEVER, HAND

Per lever after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

Forge.

Per first lever :

12- As per sketch No.l

13- As per sketch No. 2

14- As per sketch No. 3

Per lever after first one :

17- As per sketch No. 1

18- As per sketch No. 2

19- As per sketch No. 3

4M566-9 Forged and dressed. Rate

Includes getting material for whistle valve hand lever, blocking out, forging,
dressing and finishing complete.

Forge.

Per first lever :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3 • . .

Per lever after first one :

30- As per sketch No.l

31- As per sketch No. 2

32- As per sketch No. 3

4M566-12 Lengthened or shortened. Rate

Includes lengthening or shortening whistle valve hand lever when same has
become bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 .

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

BOILER MOUNTINGS
Whistle Valve Hand Lever

132

BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE— LEVER, HAND

4M566-18 Straightened. Rate

Includes straightening old whistle valve hand lever when same has become
bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4M566-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in whistle valve hand lever,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 '

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2 *.

9- As per sketch No. 3

4M666-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in whistle valve hand
lever, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

Per place repaired after first one :

17- As per sketch No. 1

18- As per sketch No. 2

19- As per sketch No. 3

BOILER MOUNTINGS

Whistle Valve Hand Lever

BOILER MOUNTINGS.

133

Whistle

VALVE— LEVER, HAND

4M566-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in whistle valve hand lever,
dressing and finishing over weld complete.

Forge.

Per first hole :

22- As per sketch No.l

23- As per sketch No. 2

24- As per sketch No. 3

Per hole after first one :

27- As per sketch No.l

28- As per sketch No. 2

29- As per sketch No. 3 '

4M666-21 Welded (new end). Rate...

Includes making and welding new stock on end of old whistle valve hand
lever, dressing and finishing end to shape complete.

Forge.

Per first end :

35- As per sketch No. 1, (top end).

36- As per sketch No. 1, (bottom end)

37- As per sketch No. 2, (top end)

38- As per sketch No. 2, (bottom end)

39- As per sketch No. 3, (top end)

40- As per sketch No. 3, (bottom end)

Per end after first one :

45- As per sketch No. 1, (top end)

46- As per sketch No. 1, (bottom end)

47- As per sketch No. 2, (top end)

48- As per sketch No. 2, (bottom end)

49- As per sketch No. 3, (top end)

50- As per sketch No. 3, (bottom end)

BOILER MOUNTINGS
Whistle Valve Hand Lever

134

BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE— ROD, CONNECTING

JP/)/sf/e Cor?nect/n^/fod.

4M670-2 Bend changed. Rate

Includes changing bend in whistle valve connecting rod.

Forge.

Per first bend changed :

1-As per sketch No.l

Per bend changed after first one :

5-As per sketch No.l

4M570-12 Lengthened or shortened. Rate

Includes lengthening or shortening whistle valve connecting rod by drawing
out or upsetting same.

Forge.

Per first rod :

1- As per sketch No.- 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS

Whistle Valve Connecting Rod

BOILER MOUNTINGS.

135

Whistle

VALVE— ROD, CONNECTING

4M670-13 Made. Rate

Includes getting material for whistle valve connecting rod, blocking out,
forging, cutting jaws, dressing and finishing complete.

Forge.

Per first connecting rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per connecting rod after first one :

5- As per sketch No.l

6- As per sketch No. 2

4M670-18 Straightened. Rate

Includes straightening old whistle valve connecting rod when same has be-
come bent.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch .No. 1

6- As per sketch No. 2

4M670-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in whistle valve connecting
rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER MOUNTINGS
Whistle Valve Connecting Rod

136

BLACKSMITH SHOP SCHEDULES.

Whistle

VALVE— ROD, CONNECTING

4M570-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in whistle valve connect-
ing rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1 ..

16- As per sketch No. 2

4M570-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in whistle valve connecting rod,
dressing and finishing over weld complete.

Forge :

18- Per first hole

19- Per hole after first one

BOILER MOUNTINGS

Whistle Valve Connecting Rod

CAB AND WOOD WORK

CAB AND WOOD WORK

Apron

HINGE

4N10-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing apron
hinge complete.

Forge.

Per first hinge.

As per sketch No. 1 :

1- Jaw hinge

2- Boss hinge

As per sketch No. 2 :

5- Bent hinge

6- Boss hinge

Per hinge after first one :

As per sketch No. 1 :

10- Jaw hinge

11- Boss hinge .

As per sketch No. 2 :

15- Bent hinge

16- Boss hinge

4N10-18 Straightened. Rate

Includes straightening old apron hinge when same has become bent or
twisted.

Forge.

Per first hinge.

As per sketch No. 1 :

1- Jaw hinge

2- Boss hinge

CAB AND WOOD WORK

Apron Hinge

139

140

BLACKSMITH SHOP SCHEDULES.

Apron

HINGE

As per sketch No. 2 :

5- Bent hinge

6- Boss hinge

Per hinge after first one.

As per sketch No. 1 :

10- Jaw hinge '

11- Boss hinge

As per sketch No. 2 : .

15- Bent hinge

16- Boss hinge

4N10-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in apron hinge, dressing
and finishing over weld complete.

Forge.

Per first place repaired.

As per sketch No. 1 :

1- Jaw hinge

2- Boss hinge

As per sketch No. 2 :

5- Bent hinge

6- Boss hinge

Per place repaired after first one.

As per sketch No. 1 :

10- Jaw hinge

11- Boss hinge

As per sketch No. 2 :

15- Bent hinge

16- Boss hinge .

4N10-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in apron hinge, dressing
and finishing over weld complete.

Forge.

Per first place repaired.

As per sketch No. 1 :

20- Jaw hinge

21- Boss hinge

As per sketch No. 2 :

25- Bent hinge

26- Boss hinge

CAB AND WOOD WORK
Apron Hinge

CAB AND WOOD WORK.

141

Apron

HINGE

Per place repaired after first one.

As per sketch No. 1 :

3(>-Jaw hinge

31-Boss liinge

As per sketch No. 2 ;

35- Bent hinge

36- Boss hinge

4N10-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in apron hinge, dressing and
finishing over weld complete.

Forge.

Per first hole plugged.

As per sketch No. 1 :

1- Jaw hinge

2- Boss hinge

As per sketch No. 2 :

5- Bent hinge

6- Boss hinge

Per hole plugged after first one.

As per sketch No. 1 ;

10- Jaw hinge

11- Boss hinge

As per sketch No. 2 :

15- Bent hinge

16- Boss hinge

CAB AND WOOD WORK

Apron Hinge

BLACKSMITH SHOP SCHEDULES.

142

Apron

HINGE LINK

4N14-13 Made. Rate

Includes getting material, forging, dressing and finishing apron hinge link
complete.

Forge.

Per first link :

1-As per sketch No. 2

Per link after first one :

5-As per sketch No. 2

4N14-18 Straightened. Rate

Includes straightening old apron hinge link when same has become bent.
Forge.

Per ‘first link :

1-As per sketch No. 2 : . . .

Per link after first one :

5-As per sketch No. 2

4N14-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in apron hinge link, dressing and
finishing over weld complete.

Forge :

1- Per first hole plugged

2- Per hole plugged after first one

CAB AND WOOD WORK
Apron Hinge Link

CAB AND WOOD WORK.

143

Bumper, Front (or Pilot Beam)
BAND

Beam Band.

4N20-2 Bend changed. Rate

Includes changing bend in front bumper band.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4N20-6 Dressed. Rate

Includes bending, dressing and finishing complete, front bumper band after
same has been forged.

Forge :

1- Per first bend

2- Per band after first one

4N2Q-9 Forged. Rate

Includes getting material, blocking out and forging front bumper band
complete, ready for bending and dressing.

Steam hammer :

1- Per first band

2- Per band after first one

CAB AND WOOD WORK
Bumper, Front (or Pilot Beam) — Band

144

BLACKSMITH SHOP SCHEDULES.

Bumper, Front (or Pilot Beam)

BAND

4N20-12 Lengthened or shortened. Rate

Includes lengthening or shortening front bumper band by drawing out or
upsetting same.

Forge :

1- Per first band

2- Per band after first one

4N20-18 Straightened. Rate

Includes straightening old front bumper band when same has become bent
or twisted.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N20-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in front bumper band,
dressing and finishing ovfer weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N20-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in front bumper band,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4N20-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in front bumper band, dress-
ing and finishing over weld complete.

Forge :

10- Per first hole plugged

1 1- Per hole plugged after first one

4N20-21 Welded (new end). Rate

Includes getting new front bumper band end after same has been forged ,
doing necessary scarfing, welding to old band, dressing, welding and finish-
ing to shape complete.

Forge ;

15- Per first end

16- Per end after first one

CAB AND WOOD WORK

Bumper, Front (or Pilot Beam) — Band

CAB AND WOOD WORK.

145

Bumper, Front (or Pilot Beam)

BAND, END

4N22-9 Forged. Rate

Includes getting material, blocking out and forging end for front bumper
band complete, ready for welding to band.

Steam hammer :

1- Per first end

2- Per end after first one

CAB AND WOOD WORK
Bumper, Front (or Pilot Beam) — End Band

146

BLACKSMITH SHOP SCHEDULES.

Cab

GRAB-IRON

Cab Grab-Irons

4N30-2 Bend changed and fit. Rate

Includes changing bend in cab grab-iron and fitting same to cab.
Forge.

Per first grab-iron changed :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per grab-iron changed after first one ;

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

CAB AND WOOD WORK
Cab Grab-iron

CAB AND WOOD WORK.

147

Cab

GRAB-IRON

4N30-12 Lengthened or shortened. Rate

Includes lengthening or shortening cab grab-iron by drawing out or up-
setting same and fitting grab-iron to cab.

Forge.

Per first grab-iron :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per grab-iron after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

4N30-13 Made. Rate

Includes getting material, forging, welding, dressing, fitting grab-iron to
cab, and finishing cab grab-iron complete.

Forge.

Per first grab-iron ;

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per grab-iron after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

4N30-18 Straightened. Rate

Includes straightening old cab grab-iron when same has become bent or
tjvisted and fitting to cab.

Forge. «

Per first grab-iron :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per grab-iron after first one ;

10- As per sketch No. 1 —

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

CAB AND WOOD WORK

Cab Grab-iron

148

BLACKSMITH SHOP SCHEDULES.

Cab

GRAB-IRON

4N30-21 Welded (break). Rate

Includes doing: necessary scarfing, welding break in cab grab-iron, dressing
and finishing over weld complete, and fitting grab-iron to cab.

Forge.

Per first grab-iron repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. .3

4- As per sketch No. 4

Per grab-iron repaired after first one :

10- As per sketch. No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As .per sketch No. 4

4N30-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in cab grab-iron, dress-
ing and finishing over weld complete, and fitting grab-iron to cab.

Forge.

Per first grab-iron repaired :

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3

23- As per sketch No. 4

Per grab-iron repaired after first one :

28- As per sketch No. 1

29- As per sketch No. 2

30- As per sketch No. 3

31- As per sketch No. 4

4N30-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in end of cab grab-iron, dress-
ing and finishing over weld complete, and fitting grab-iron to cab.

Forge.

Per first hole :

36- As per sketch No. 1

37- As per sketch No. 2

38- As per sketch No. 3

39- As per sketch No. 4

Per hole after first one in the same grab-iron :

42- As per sketch No. 1

43- As per sketch No. 2

44- As per sketch No. 3

45- As per sketch No. 4

CAB AND WOOD WORK
Cab Grab-iron

CAB AND WOOD WORK.

149

Cab

GRAB-IRON

4N30-21 Welded (new ends). Rate

Includes getting material, making end, welding same to grab-iron, dressing
and finishing end complete, and fitting grab-iron to cab.

Forge.

Per first end :

50- As per sketch No. 1, top end

51- As per sketch No. 1, bottom end

52- As per sketch No. 2, top end

53- As per sketch No. 2, bottom end

54- As per sketch No. 3, top end

55- As per sketch No. 3, bottom end .

56- As per sketch No. 4, top end

57- As per sketch No. 4, bottom end

Per end after first one :

60- As per sketch No. 1, top end

61- As per sketch No. 1, bottom end

62- As per sketch No. 2, top end

63- As per sketch No. 2, bottom end

64- As per sketch No. 3, top end

65- As per sketch No. 3, bottom end

66- As per sketch No. 4, top end

67- As per sketch No. 4, bottom end

CAB AND WOOD WORK

Cab Grab-iron

150

BLACKSMITH SHOP SCHEDULES.

Cab

SEAT SUPPORT

Cab Seat Support

4N36-12 Lengthened or shortened. Rate

Includes lengthening or shortening cab seat support by drawing out or up-
setting same.

Forge :

1- Per first support

2- Per support after first one

4N36-13 Made. Rate

Includes getting material, forging, dressing and finishing complete, cab seat
support.

Forge :

1- Per first support

2- Per support after first one

4N36-18 Straightened. Rate

Includes straightening old cab seat support when same has become bent.
Forge :

1- Per first support

2- Per support after first one ;

4N36-21 Welded (break). Rate

Includes doing necessary scarfing in cab seat support, dressing and finishing
over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one .

CAB AND WOOD WORK
Cab Seat Support

CAB AND WOOD WORK.

151

Cab

SEAT SUPPORT HINGE

Cai?3eaf Support Hinge

4N38-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing cab seat
support lunge complete.

Forge :

1- Per first hinge

2- Per hinge after first one

4N38-18 Straightened. Rate

Includes straightening old cab seat support hinge when same has become
bent.

Forge :

1- Per first hinge

2- Per hinge after first one . .

4N38-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in cab seat support hinge, dress-
ing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

CAB AND WOOD WORK

Cab Seat Support — Hinge

152

BLACKSMITH SHOP SCHEDULES.

Cab

VENTILATOR— LEVER, OPERATING

Gab Ventilator Operating Lever

4N50-6 Dressed. Rate __

Includes dressing and finishing cab ventilator operating lever complete,
after same has been forged.

Forge :

1- Per first lever

2- Per lever after first one . .

4N50-9 Forged. Rate...

Includes getting material, blocking out, forging cab ventilator operating
lever complete, ready for dressing.

Steam hammer :

1- Per first lever

2- Per lever after first one

Forge :

5- Per first lever ..

6- Per lever after first one

4N60-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing
cab ventilator operating lever complete.

Forge :

10- Per first lever

11 - Per lever after first one

4N50-12 Lengthened or shortened. Rate

Includes lengthening or shortening cab ventilator operating lever by draw-
ing out or upsetting same.

Forge :

1- Per first lever

2- Per lever after first one

CAB AND WOOD WORK

Cab Ventilator — Operating Lever

CAB AND WOOD WORK.

153

Cab

VENTILATOR— LEVER, OPERATING

4N50-18 Straightened. Rate

Includes straightening old cab ventilator operating lever when same has be-
come bent .

Forge :

1- Per first lever

2- Per lever after first one .

4N50-21 Welded (break). Rate...,

Includes doing necessary scarfing, welding break in cab ventilator operating
lever, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N50-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in cab ventilator operating
lever, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4N50-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in boss end of cab ventilator
operating lever, dressing and finishing over weld complete.

Forge :

10- Per first end

1 1- Per end after first one

CAB AND WOOD WORK
Cab Ventilator — Operating Lever

154

BLACKSMITH SHOP SCHEDULES.

Cab

VENTILATOR LOCK BRACKET

Cob Kent Hotor
Lock BracKer

&

4N64-12 Lengthened or shortened. Rate

Includes lengthening or shortening cab ventilator lock bracket by drawing out
or upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4N54-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing cab
ventilator lock bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4N64-18 Straightened. Rate . .

Includes straightening old cab ventilator lock bracket when same has become
bent.

Forge :

1- Per first bracket

2- Per bracket after first one

4N54-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in cab ventilator lock
bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

CAB AND WOOD WORK

Cab Ventilator Lock Brackel

CAB AND WOOD WORK.

155

Cab

VENTILATOR LOCK BRACKET

4N54-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in cab ventilator lock
bracket, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one ..

4N64-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in cab ventilator lock bracket,
dressing and finishing over weld complete.

Forge :

10- Per first hole

11 - Per hole after first one

CAB AND WOOD WORK

Cab Ventilator Lock Bracket

156

BLACKSMITH SHOP SCHEDULES.

Cab

VENTILATOR LOCK HOOK

L^entilotor Lock HooK

I " «?

4N60-12 Lengthened or shortjened. Rate

Includes lengthening or shortening cab ventilator lock hook by drawing out
or upsetting same.

Forge :

1- Per first rod

2- Per rod after first one

4N60-13 Made. Rate

Includes getting material, forging, dressing and finishing cab ventilator
lock hook complete.

Forge :

1- Per first rod

2- Per rod after first one ■

4N60-18 Straightened. Rate

Includes straightening old cab ventilator lock hook when same has become
bent.

Forge :

1- Per first rod

2- Per rod after first one

4N60-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in cab ventilator lock hook,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N60-21 Welded (crack). Rate -

Includes making dutchman, welding same in crack in cab ventilator lock hook,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired ,

6- Per place repaired after first one

CAB AND WOOD WORK
Cab Ventilator Lock Hook

CAB AND WOOD WORK.

157

Cab

VENTILATOR— SHAFT, OPERATING— ARM

Ca/) l/entHator
Shaft ffrm

4N68-6 Dressed. Rate

Includes dressing and finishing cab ventilator operating shaft arm complete,
after same has been forged.

Forge :

1- Per first arm

2- Per arm after first one

4N68-9 Forged. Rate —

Includes getting material for cab ventilator operating shaft arm, blocking
out, forging complete, ready for dressing.

Steam hammer :

1- Per first arm

2- Per arm after first one

Forge :

3- Per first arm;

4- Per arm after first one -

4N68-9 Forged and dressed. Rate

Includes getting material for cab ventilator operating shaft arm, blocking
out, forging, dressing and finishing complete.

Forge :

7-Per first arm

- 8-Per arm after first one

4N68-12 Lengthened or shortened. Rate

Includes lengthening or shortening cab ventilator operating shaft arm by
drawing out or upsetting same

Forge :

1- Per first arm

2- Per arm after first one

CAB AND WOOD WORK
Cab Ventilator Operating Shaft Arm

158

BLACKSMITH SHOP SCHEDULES.

Cab

VENTILATOR— SHAFT, OPERATING— ARM

4N68-18 Straightened. Rate

Includes straightening old cab ventilator operating shaft arm when same
has become bent.

Forge :

1- Per first arm

2- Per arm after first one

4N68-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in cab ventilator operating
shaft arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N68-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in cab ventilator operating
shaft arm, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one. . . ; - ..

4N68-21 Welded (holes plugged). Rate.. ..

Includes making plug, welding same in hole in cab ventilator operating shaft
arm, dressing and finishing over weld complete.

Forge.

Per first hole :

10- In jaw end

11- In boss end

Per hole after first one :

15- In jaw end

16- In boss end

CAB AND WOOD WORK

Cab Ventilator Operating Shaft Arm

CAB AND WOOD WORK.

159

Cab

WINDOW— ROD, ADJUSTING

Cab kC/ndoh' Adjusting Hod

n n >-> - =

V

4N76-2 Bend changed. Rate

Includes changing bend in cab window adjusting rod.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4N76-12 Lengthened or shortened. Rate

Includes lengthening or shortening cab window adjusting rod by drawing out
or upsetting same.

Forge :

1- Per first rod

2- Per rod after first one

4N76-13 Made complete. Rate

Includes getting material, forging, bending, dressing and finishing cab
window adjusting rod complete.

• Forge :

1- Per first rod

2- Per rod after first one

4N76

4N76

-18 Straightened. Rate

Includes straightening old cab window adjusting rod when same has become
bent.

Forge :

1- Per first rod .

2- Per rod after first one

-21 Welded (break). Rate

Includes doing necessary scarfing and welding break in cab window adjusting

Forge :

1- Per first place repaired

2- Per place repaired after first one

CAB AND WOOD WORK

Cab Window Adjusting Rod

160

BLACKSMITH SHOP SCHEDULES.

Coupler

ROD, UNCOUPLING

^Coup/er t/ncoup//np

Coup/er O/icoupUng ffod

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4N90-12 Lengthened or shortened. Rate

Includes lengthening or shortening coupler uncoupling rod by drawing out or
upsetting same.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

CAB AND WOOD WORK
Coupler Uncoupling Rod

CAB AND WOOD WORK.

161

Coupler

ROD, UNCOUPLING

4N90-13 Made. Rate

Includes getting material for uncoupling rod, forging, dressing rod and arms,
doing necessary scarfing and welding, and finishing rod complete.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4N90-18 Straightened. Rate

Includes straightening old coupler uncoupling rod and arms complete when
same have become bent or twisted.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1 ■

6- As per sketch No. 2

4N90-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in coupler upcoupling
rod or arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N90-21 Welded and dressed (arms). Rate

Includes doing necessary scarfing, welding arms on coupler uncoupling rod,
dressing and finishing complete.

Forge. i

Per first arm welded on :

5- As per sketch No. 1

6- As per sketch No. 2

Per arm welded on after first one :

8- As per sketch No. 1

9- As per sketch No. 2

CAB AND WOOD WORK

Coupler Uncoupling Rod

162

BLACKSMITH SHOP SCHEDULES.

Coupler

ROD, UNCOUPLING— ARM

4N92-2 Bend or offset changed. Rate

Includes changing bend or offset in coupler uncoupling rod arm.

Forge.

Per first arm :

1-As per sketch No. 1

3-As per sketch No. 2

Per arm after first one :

5-As per sketch No.l

7- As per sketch No. 2

4N92-12 Lengthened or shortened. Rate .

Includes lengthening or shortening coupler uncoupling rod arm by drawing
out or upsetting same.

Forge.

Per first arm :

1-As per sketch No. 1

3-As per sketch No. 2 .

Per arm after first one :

5-As per sketch No. 1

7- As per sketch No. 2

4N92-18 Straightened. Rate

Includes straightening old coupler uncoupling rod arm when same has be-
come bent.

Forge.

Per first arm :

1-As per sketch No.l

3-As per sketch No. 2

Per arm after first one :

5-As per sketch No.l

7-As per sketch No. 2

CAB AND WOOD WORK

Coupling Uncoupling Rod Arm

CAB AND WOOD WO'iK

163

Coupler

ROD, UNCOUPLING— BRACKET

4N96-2 Bend changed. Rate

Includes changing bend in coupler uncoupling rod bracket .

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

Per bend changed after first one :

5- As per sketch No.l

6- As per sketch No. 2

4N96-12 Lengthened or shortened. Rate.

Includes lengthening or shortening coupler uncoupling rod bracket.
Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

CAB AND WOOD WORK
Coupler Uncoupling Rod Bracket

164

BLACKSMITH SHOP SCHEDULES.

Coupler

ROD, UNCOUPLING— BRACKET

4N96-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing complete,
coupler uncoupling rod bracket and applying same to rod.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bracket after first one :

5- As per sketch No. 1

6- As per sketch No. 2

7- As per sketch No. 3

4N96-18 Straightened. Rate

Includes straightening old coupler uncoupling rod bracket after same has
become bent.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

5- As per sketch No. 1 ‘

6- As per sketch No. 2 ..

CAB AND WOOD WORK

Coupler Uncoupling Rod Bracket

CAB AND WOOD WORK.

165

Deck

SUPPORT

Engine DecK Support

4N100-12 Lengthened or shortened. Rate

Includes lengthening or shortening deck support by drawing out or upsetting
same.

Forge :

1- Per first support

2- Per support after first one

4N100-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing deck
support complete.

Forge :

1- Per first support

2- Per support after first one

4N100-18 Straightened. Rate

Includes straightening old deck support when same has become bent or
twisted.

Forge :

1- Per first support '

2- Per support after first one

4N100-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in deck support, dressing
and finishing over weld complete.

Forge :

1- Per first support

2- Per support after first one .

CAB AND WOOD WORK

Deck Support

166

BLACKSMITH SHOP SCHEDULES.

Deck

SUPPORT

4N100-21 Welded (crack). Rat?

Includes making dutchman, welding same in crack in deck support, dr toss-
ing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4N100-21 Welded (holes plugged). Rate . ..

Includes making plug, welding same in hole in deck support, dressing and
finishing over weld complete.

Forge :

10- Per first hole

11- Per hole after first one -

CAB AND WOOD WORK
Deck Support

CAB AND WOOD WORK.

167

Pilot

BEAM BAND

4N200.

For operations on Pilot Beam Band, see Schedule No. 4N20, under Front
Bumper Band.

AB A D WOOD WORK

Pilot Beam Band

168

BLACKSMITH SHOP SCHEDULES.

/

4N202-2 Bend changed.

Includes going to engine, getting measurements, changing set in foot of
pilot beam brace, and fitting up brace comp ete.

Forge. ;

Per first brace : i

1- As per sketch No. 1

2- As per sketch No. 2 * .

3- As per sketch No. 3 , ^

Per brace after first one ; '

5- As per sketch No. 1 , ;

6- As per sketch No. 2 ’

7- As per sketch No. 3 \

Rate

Pilot

BEAM BRACE

F/Vo/- Braces

CAB AND WOOD WORK
Pilot Beam Brace

CAB AND WOOD WORK.

169

Pilot

BEAM BRACE

4N202-2 Bend changed (when brace is changed in length). Rate

Same as schedules 4N202-2-1 to 4N202-2-7, but including changing length
of pilot beam brace by drawing out or upsetting same.

Forge.

Per first brace :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

Per brace after first one :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

4N202-2 Bend changed (including shortening by welding). Rate .

Same as schedule 4N202-2-1 to 4N202-2-7, but including shortening pilot
beam brace by cutting out stock and welding parts together complete.

Forge.

Per first brace :

20- As per sketch No.l

21- As per sketch No. 2 .

22- As per sketch No. 3 .

Per brace after first one :

26- As per sketch No. 1 ...

27- As per sketch No. 2

28- As per sketch No. 3

4N202-2 Bend changed (including lengthening by welding). Rate

Same as schedule 4N202-2-1 to 4N202-2-7, but including lengthening pilot
beam brace by welding in required new stock, dressing and finishing brace
complete.

Forge.

Per first brace :

31- As per sketch No. 1

32- As per sketch No. 2

33- As per sketch No. 3

Per brace after first one :

38- As per sketch No. 1

39- As per sketch No. 2 .

40- As per sketch No. 3

CAB AND WOOD WORK

Pilot Beam Brace

170

BLACKSMITH SHOP SCHEDULES.

Rate

Pilot

BEAM BRACE

4N202-12 Lengthened or shortened.

Includes lengthening or shortening pilot beam brace by drawing out or up-
setting same. Fitting not included.

Forge :

1- Per first brace —

2- Per brace after first one

4N202-13 Made (including making feet).

Rate

Includes going to engine, getting measurements, getting material, blocking
out and forging feet, welding same to body dressing, and finishing pilot
beam brace and fitting on engine complete.

Forge.

Per first brace :

1- As per sketch No.-l .

2- As per sketch No. 2 .

3- As per sketch No. 3 .

Per brace after first one :

7 - As per sketch No. 1 .

8- As per sketch No. 2 .

9- As per sketch No. 3 .

4N202-13 Made (after feet have been forged).

Rate

Includes getting feet from stock or from old braces, getting other material,
welding feet to body of pilot beam brace, dressing and finishing brace to
shape, and fitting brace on engine complete.

Forge.

Per first brace :

15- As per sketch No. 1 .

16- As per sketch No, 2 .

17- As per sketch No. 3 .

Per brace after first one :

20- As per sketch No. 1 .

21- As per sketch No. 2 .

22- As per sketch No. 3 .

Rato

4N202-18 Straightened.

Includes straightening old pilot beam brace when same has become bent
twisted.

?!

Forge :

1- Per first brace, all sketches

2- Per brace after first one, all sketches .

A

CAB AND WOOD WORK
Pilot Beam Brace

CAB AND WOOD WORK.

171

Pilot

BEAM BRACE

4N202-18 Straightened and fitted up. Rate

Includes straightening old pilot beam brace, going to engine and getting
measurements, and fitting up brace to engine complete.

Forge.

Per first brace :

5- As per sketch No. 1

6- As per sketch No. 2 . .

7- As per sketch No. 3

Per brace after first one ;

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

4N202-21 Welded (break). Rato

Includes doing necessary scarfing, welding break in pilot beam brace, dress-
ing and finishing over weld complete.

Forge :

1- Per first place repaired, all sketches .

2- Per place repaired after first one, all sketches

4N202-21 Welded (break and brace fitted up). Rato

Includes doing necessary scarfing, welding break in pilot beam brace, going
to engine, getting measurements and fitting brace to engine complete.

Forge.

Per first brace :

5- As per sketch No. 1

6- As per sketch No. 2 _

7- As per sketch No. 3

Per brace after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

4N202-21 Welded (crack). Rato

Includes making dutchman, welding same in crack in pilot beam brace,
dressing and finishing over weld complete.

Forge :

20- Per first place repaired

21- Per place repaired after first one

CAB AND WOOD WORK

Pilot Beam Brace

172

BLACKSMITH SHOP SCHEDULES.

Pilot

BEAM BRACE

4N202-21 Welded (crack and brace fitted up).

Rate

Includes making dutchman, welding same in crack in pilot beam brace/'
going to engine, getting measurements, and fitting up brace to engine com-^
plete.

Forge. • i

Per first brace :

25- As per sketch No. 1 . . .

26- As per sketch No. 2 ,

27- As per sketch No. 3

Per brace after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

CAB AND WOOD WORK
Pilot Beam Brace

CAB AND WOOD WORK.

173

Pilot

BEAM BRACE FOOT

4N204-4 Cut — Iron. Rate .*

Includes cutting iron at power shears for pilot beam brace foot.

Forge :

1-Per piece cut ; . .

4N204-13 Made (at forging machine). Rate.

Includes changing dies in forging machine and forging complete foot for
pilot beam brace after foot has been cut and delivered to machine.

Machine :

1- Per first foot

2- Per foot after first one

CAB AND WOOD WORK

Pilot Beam Brace Foot

174

BLACKSMITH SHOP SCHEDULES.

Pilot

BEAM GRAB-IRON

n/ot Beam Grab Iron

4N208-4 Cut — Iron. Rate

Includes cutting iron at power shears for pilot beam grab-iron.

Power shears :

1-Per piece cut

4N208-12 Lengthened or shortened. Rate

Includes lengthening or shortening pilot beam grab-iron by drawing out or
upsetting same.

Forge :

1- Per first grab-iron

2- Per grab-iron after first one

4N208-13 Made. Rate...

Includes getting material, forging, bending, dressing and finishing complete,
pilot beam grab-iron.

Forge :

1- Per first grab-iron ‘

2- Per grab-iron after first one

4N208-13 Made (at forging machine). Rate

Includes changing dies in forging machine, heating material for pilot beam
grab-iron after same has been cut and delivered to machine, and forging
grab-iron complete.

Forging machine :

5- Per first grab-iron

6- Per grab-iron after first one

4N208-18 Straightened. Rate

Includes straightening old pilot beam grab-iron when same has become bent.
Forge :

1- Per first grab-iron . ..

2- Per grab-iron after first one

CAB AND WOOD WORK
Pilot Beam Grab-iron

CAB AND WOOD WORK.

175

Pilot

BEAM GRAB-IRON

4N208-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in pilot beam grab-iron,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N208-21 Welded (holes plugged). Rate....

Includes making plug, welding same in hole in pilot beam grab-iron, dress-
ing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

4N208-21 Welded (new end). Rate

Includes getting material, making end, welding new end on pilot beam
grab-iron, dressing and finishing over weld complete.

Forge :

10- Per first end

11- Per end after first one

CAB AND WOOD WORK

Pilot Beam Grab-iron

176

BLACKSMITH SHOP SCHEDULES.

Pilot

BRACE, CORNER

Pilot Corner Brace

4N212-9 Forged and dressed. Rate

Includes getting material, forging, dressing and finishing pilot comer brace
complete.

Steam hammer :

1- Per first brace

2- Per brace after first one : ...

Forge :

, 3-Per first brace

4-Per brace after first one

4N212-18 Straightened. Rate ...

Includes straightening old pilot corner brace when same has become bent or
twisted.

Forge :

1- Per first brace

2- Per brace after first one

4N212-21 Welded (crack). Rate. .. ‘

Includes making dutchman, welding same in crack in pilot corner brace, dress- ’
ing and finishing over weld complete. '

Forge :

1- Per first place repaired ;

2- Per place repaired after first one

4N212-21 Welded (holes plugged). Rate ^

Includes making plug, welding same in hole in pilot corner brace, dressing |
and finishing over weld complete. I

Forge :

5- Per first hole j

6- Per hole after first one ’

CAB AND WOOD WORK
Pilot — Corner Brace

CAB AND WOOD WORK,

177

Pilot

COUPLER GUARD

P//of &uard

4N216-2 Bend changed. Rate

Includes changing bend in pilot coupler guard.

Forge ;

1- Per first bend changed

2- Per bend changed after first one

4N216-4 Cut — Iron. Rate..

Includes cutting iron for pilot coupler guard at power shears.

Power shears :

1-Per piece cut

4N216-13 Made. Rate

Includes getting material, bending, dressing and finishing pilot coupler guard
complete.

Forge :

1- Per first guard

2- Per guard after first one

Bulldozer :

3- Per first guard

4r-Per guard after first one

4N216-18 Straightened. Rate

Includes straightening old pilot coupler guard when same has become bent
or twisted.

Forge :

1- Per first guard

2- Per guard after first one

CAB AND WOOD WORK

Pilot Coupler Guard

178

BLACKSMITH SHOP SCHEDULES.

Pilot

COUPLER GUARD

4N216-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in pilot coupler guard,
dressing and finishing over weld complete.

Forge ;

1- Per first place repaired

2- Per place repaired after first one

4N216-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in pilot coupler guard,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4N216-21 Welded (holes plugged). Rate..

Includes making plug, welding same in hole in pilot coupler guard, dressing
and finishing over weld complete.

Forge :

9-Per first hole plugged

lO-Per hole plugged after first one

CAB AND WOOD WORK
Pilot Coupler Guard

CAB AND WOOD WORK.

179

Pilot

DRAWHEAD

P//of Drai^ Head Casting.

4N220-18 straightened. Rate

Includes straightening old pilot drawhead when same has become bent or
twisted.

Forge ;

1- Per first drawhead

2- Per drawhead after first one

CAB AND WOOD WORK

Pilot Drawhead

180

BLACKSMITH SHOP SCHEDULES.

Pilot

RIM BAND

Enyme Pi/ot Bond

4N240-2 Bend changed. Rate

Includes changing bend in pilot rim band.

Forge :

1- Per first bend changed

2- Per bend changed after first one ^

4N240-4 Cut — Iron. Rate

Includes cutting iron at power shears for pilot rim band.

Power shears ;

1-Per piece cut

4N240-7 Fitted and applied. Rate...

Includes putting pilot rim band on pilot complete, and heating if necessary.
When band is not heated :

1- Per first band

2- Per band after first one

When band is heated.

Forge :

5- Per first band

6- Per band after first one

4N240-12 Lengthened or shortened. Rate

Includes lengthening or shortening any one of the sides of pilot rim band.
Forge :

1- Per first side lengthened or shortened

2- Per side lengthened or shortened after first one

CAB AND WOOD WORK
Pilot Rim Band

CAB AND WOOD WORK.

181

Pilot

RIM BAND

4N240-13 Made. Rate

Includes getting material, bending, dressing, welding and finishing pilot rim
band complete.

Forge :

1- Per first band

2- Per band after first one

4N240-13 Made (for stub pilots). Rate

Includes getting material, bending, dressing and finishing pilot rim band com-
plete, when former cannot be used.

Forge:

5- Per first band

6- Per band after first one

4N240-15 Punched (holes). Rate

Includes laying out holes in pilot rim band and punching same at power
punch.

Power punch :

1- Per first hole

2- Per hole after first one

4N240-18 Straightened. Rate...

Includes straightening old pilot rim band when same has become bent or
twisted.

Forge :

1- Per first band

2- Per band after first one

4N240-21 Welded (break). Rate ...

Includes doing necessary scarfing, welding break in pilot rim band, dressing
and finishing over weld complete.

Forge :

1- Per first place repaired ,

2- Per place repaired after first one

4N240-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in pilot rim band, dressing
and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

CAB AND WOOD WORK

Pilot Rim Band

182

BLACKSMITH SHOP SCHEDULES.

Step, Engine
BRACKET

3

4

CAB AND WOOD WORK
Step, Engine — Bracket

CAB AND WOOD WORK.

183

Step, Engine
BRACKET

4N260-2 Bend changed. Rate

Includes changing bend in engine step bracket.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per bend changed after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

4N250-4 Cut — Iron. Rate.

Includes cutting iron for engine step bracket at power shears.

Power shears :

1-Per piece cut

4N250-12 Lengthened or shortened. Rate

Includes lengthening or shortening engine step bracket by drawing out or
upsetting same.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4r-As per sketch No. 4

Per bracket after first one :

7- As per sketch No. 1 '

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

CAB AND WOOD WORK

Step, Engine — Bracket

184

BLACKSMITH SHOP SCHEDULES.

Step, Engine
BRACKET

4N250-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, engine
step bracket.

Forge.

Per first bracket :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per bracket after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

4N250-18 Straightened. Rate

Includes straightening old engine step bracket when same has become bent
or twisted.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per bracket after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3 -

10-As per sketch No. 4

4N250-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in engine step bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per place repaired after first one ;

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10- As per sketch No. 4 -

CAB AND WOOD WORK
Step, Engine — Bracket

CAB AND WOOD WORK.

185

Step, Engine
BRACKET

4N260-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in engine step bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

Per place repaired after first one :

22- As per sketch No.l

23- As per sketch No. 2

24- As per sketch No. 3

25- As per sketch No. 4

4N260-21 Welded (holes plugged). Rate.

Includes making plug, welding same in hole in engine step bracket, dressing
and finishing over weld complete.

Forge.

Per first hole plugged :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

33- As per sketch No. 4

Per hole plugged after first one :

37- As per sketch No. 1

38- As per sketch No. 2

39- As per sketch No. 3

40- As per sketch No. 4

CAB AND WOOD WORK

Step, Engine — Bracket

186

BLACKSMITH SHOP SCHEDULES.

Step, Engine
HANGER

Engine Step Hanger

4N266-2 B.end changed. ' Rate.

Includes changing bend in engine step hanger.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4N266-4 Cut — Iron. Rate.

Includes cutting iron for engine step hanger at power shears.

Power shears :

1-Per piece cut

4N266-12 Lengthened or shortened. Rate

Includes lengthening or shortening engine step hanger by drawing out or
upsetting same.

Forge :

1- Per first hanger *

2- Per hanger after first one

CAB AND WOOD WORK
Step, Engine — Hanger

CAB AND WOOD WORK.

187

Step, Engine
HANGER

4N266-13 Made. Rate

Includes getting material, bending, dressing and finishing .engine step hanger
complete.

Forge :

1- Per first hanger

2- Per hanger after first one

4N256-18 Straightened. Rate

Includes straightening old engine step hanger when same has become bent or
twisted.

Forge :

1- Per first hanger

2- Per hanger after first one

4N256-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in engine step hanger,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4N256-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in engine step hanger ,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4N266-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in engine step hanger, dressing
and finishing over weld complete.

Forge :

8- Per first hole plugged

9- Per hole plugged after first one

CAB AND WOOD WORK

Step, Engine — Hanger

AIR BRAKE MECHANISM

AIR BRAKE MECHANISM

Cock, Angle

BRACKET

/7/7(^/e CocH
SracAer.

4Q10-2 Bend changed. Rate

Includes changing bend in angle cock bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4Q10-4 Cut — Iron. Rate

Includes cutting iron for angle cock bracket at power shears complete.
Power shears :

1-Per bracket cut

4Q10-12 Lengthened or shortened. Rate

Includes lengthening or shortening angle cock bracket by drawing out or up-
setting same.

Forge :

1- Per first bracket

2- Per bracket after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Cock, Angle — Bracket

191

192

BLACKSMITH SHOP SCHEDULES.

Cock, Angle
BRACKET

4Q 10-13 Made. Rate

Includes getting material for angle cock bracket, forging, bending, dressing
and finislung complete.

Forge :

1- Per first bracket ‘

2- Per bracket after first one

4Q10-18 Straightened. Rate

Includes straightening old angle cock bracket when same has become bent.
Forge :

1- Per first bracket

2- Per bracket after first one

4Q10-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in angle cock bracket, dressing
and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

AIR BRAKE MECHANISM— ENGINE BRAKES
Cock, Angle — BracRet

AIR BRAKE MECHANISM.

193

Cylinder, Brake \

SPRING, RELEASE

BroKe Cy//nder /?e/ease Spnrt^.

4Q16-4 Cut to length. Rate

Includes getting material and cutting to length, bar for brake cylinder re-
lease spring. •

1- Per first bar

2- Per bar after first one

4Q16-10 Formed. Rate

Includes rolling complete brake cylinder release spring.

1- Per first spring

2- Per spring after first one

4Q16-12 Lengthened. Rate

/ Includes opening to length, brake cylinder release spring after same has been
rolled.

1- Per first spring

2- Per spring after first one •. .

4Q16-lla Heated. Rate

Includes heating bars and tapering same for brake cylinder release spring
complete.

1- Per first spring

2- Per spring after first one

4Q16-19a Tempered. Rate

Includes heating and tempering complete, brake cylinder release spring.

1- Per first spring

2- Per spring after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Cylinder, Brake — Release Spring

194

BLACKSMITH SHOP SCHEDULES.

Dummy Coupling
LUG

Coup///7£jjjg

o

o

w

4Q20-13 Made. Rate

Includes getting material for dummy coupling lug, forging, bending, dressing '
and finishing complete.

Forge :

1- Per first lug

2- Per lug after first one

4Q20-18 Straightened. Rate

Includes straightening old dummy coupling lug when same has become bent.
Forge :

1- Per first lug ’

2- Per lug after first one ,

4Q20-21 Welded (break). Rate ]

Includes doing necessary scarfing, welding break in dummy coupling lug,
dressing and finishing over weld complete. ’

Forge : . ,

1- Per first place repaired

2- Per place repaired after first place ;

4Q20-21 Welded (crack). Rate ;

Includes making dutchman, welding same in crack in dumm}^ coupling lug, {
dressing and finishing over weld complete. |

Forge : ;

7- Per first place repaired i

8- Per place repaired after first one

AIR BRAKE MECHANISM— ENGINE BRAKES
Dummy Coupling Lug

AIR BRAKE MECHANISM.

195

Dummy Coupling
LUG

4Q20-21 Welded (holes plugged). Rate ...

Includes making plug, welding same in hole in dummy coupling lug, dressing
and finishing over weld complete.

Forge :

11- Per first hole plugged

12 — Per hole plugged after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Dummy Coupling Lug

196

BLACKSMITH SHOP SCHEDULES.

Equalizer, Main

FULCRUM SUPPORT

Af£7//p r<^aa// 2 er rc/fcriz/n 6u/?/Port

©

©

©

©

©

©

©

©

©

©

©

©

©

©

4Q28-12 Lengthened or shortened. Rate

Includes lengthening or shortening main equalizer fulcrum support by
drawing out or upsetting same.

Forge :

1- Per first support

2- Per support after first one -

4Q28-13 Made. Rate

Includes getting material for main equalizer fulcrum support, forging, dress-
ing and finishing complete.

Steam hammer :

1- Per first support -

2- Per support after first one

4Q28-18 Straightened. Rate

Includes straightening old main equalizer fulcrum support when same has
become bent.

Steam hammer :

1- Per first support

2- Per support after first one

Forge :

3- Per first support

4- Per support after first one -

4Q28-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in main equalizer ful-
crum support, dressing and finishing over weld complete.

Forge :

1- Per first place repaired ,

2- Per place repaired after first one

AIR BRAKE MECHANISM— ENGINE BRAKES
Equalizer, Main — Fulcrum Support

AIR BRAKE MECHANISM.

197

Equalizer, Main

FULCRUM SUPPORT

4Q28-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in main equalizer ful-
crum support, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4Q28-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in main equalizer fulcrum sup-
port, dressing and finishing over weld complete.

Forge :

1 1- Per first hole plugged

12- Per hole plugged after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Equalizer, Main — Fulcrum Support

198 BLACKSMITH SHOP SCHEDULES.

Pump, Air

BRACKET

Brae nets.

/ ^ ' j

4Q50-2 Bend changed. Rate

Includes changing bend in air pump bracket.

Forge.

Per first bend changed :

1- As per sketch No. 2

2- As per sketch No. 3

Per bend changed after first one ; '

7- As per sketch No. 2

8- As per sketch No. 3

4Q50-4 Cut— Iron. Rate.

Includes cutting iron for air pump bracket at power shears.

Power shears :

1-Per piece cut

AIR BRAKE MECHANISM— ENGINE BRAKES
Pump, Air — Bracket

AIR BRAKE MECHANISM.

199

Pump, Air

BRACKET

4Q60-12 Lengthened or shortened. Rate

Includes lengthening or shortening air pump bracket by drawing out or
upsetting same.

Forge.

Per first place lengthened or shortened :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place lengthened or shortened after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10-As per sketch No. 3

4Q60-13 Made. Rate

Includes getting material for air pump bracket, forging, bending, dressing
and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1, cut off only

2- As per sketch No. 2

3- As per sketch No. 3

Per bracket after first one :

8- As per sketch No. l,.cut off only

9- As per sketch No. 2

10-As per sketch No. 3

4Q60-18 Straightened. Rate

Includes straightening old air pump bracket when same has become bent or
twisted.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

8- As per sketch No.l

9- As per sketch No. 2

10-As per sketch No. 3

AIR BRAKE MECHANISM— ENGINE BRAKES

Pump, Air — Bracket

200

BLACKSMITH SHOP SCHEDULES,

Pump, Air

BRACKET

4Q50-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in air pump bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1 ’

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10-As per sketch No. 3

4Q50-21 Welded (crack). Rate

Includes making dutchman, welding same in crack, in air pump bracket,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

15- As per sketch No. 1 . . .

16- As per sketch No. 2

17- As per sketch No. 3

Per place repaired after first one :

21- As per sketch No. 1

22- As per sketch No. 2

23- As per sketch No. 3

4Q50-21 Welded (holes plugged). Rate...

Includes making' plug, welding same in hole in air pump bracket, dressing
and finishing over weld complete.

Forge.

Per first hole :

28- As per sketch No. 1 —

29- As per 'sketch No. 2

30- As per sketch No. 3

Per hole after first one :

35- As per sketch No. 1

36- As per sketch No. 2

37- As per sketch No, 3 '

AIR BRAKE MECHANISM— ENGINE BRAKES
Pump, Air — Bracket

AIR BRAKE MECHANISM.

201

Pump, Air

ROD, PISTON

z?//^ Fizmp F/sfon Fod

4Q58-12 Lengthened or shortened. Rate

Includes lengthening or shortening air pump piston rod by dra\\dng out
or upsetting same.

Forge :

1- Per first rod

2- Per rod after first one

4Q58-13 Made. Rate

Includes getting material for air pump i)iston rod, forging, dressing and fin-
ishing complete.

Steam hammer :

1- Per first rod .•

2- Per rod after first one

Forge :

3- Per first rod

4- Per rod after first one

4Q58-18 Straightened. Rate

Includes straightening old air pump piston rod when same has become bent.
Forge :

1- Per first rod

2- Per rod after first one

4Q68-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in air pump piston rod,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Pump, Air — Piston Rod

202

BLACKSMITH SHOP SCHEDULES.

Pump, Air

ROD, PISTON

4Q58-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in air pump piston rod,
dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4Q68-21 Welded (new end). Rate

Includes getting material, slabbing new end on air pump piston rod, dress-
ing and finishing end complete.

Forge :

11- Per first end

12- Per end after first one i .

I

AIR BRAKE MECHANISM— ENGINE BRAKES
Pump, Air — Piston Rod

AIR BRAKE MECHANISM.

203

Reservoir, Auxiliary
SUPPORT

4Q60-2 Bend changed. Rate

Includes changing bend in auxiliary reservoir support.

Forge.

Per first bend changed ;

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per bend changed after first one :

9-As per sketch No.l

10- As per sketch No. 2

11- As per sketch No. 3.^

12- As per sketch No. 4

AIR BRAKE MECHANISM— ENGINE BRAKES

Reservoir, Auxiliary — Support

204 BLACKSMITH SHOP SCHEDULES.

Reservoir, Auxiliary
SUPPORT

4Q60-12 Lengthened or shortened. Rate

Includes lengthening or shortening auxiliary reservoir support by drawing
out or upsetting same,

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Pen support after first one :

9- As per sketch No. 1

10- As per sketch No. 2

11- As per sketch No. 3

12- As per sketch No. 4

4Q60-13 Made. , Rate

Includes getting material for auxiliary reservoir support, forging, bending,
dressing and finishing complete.

Forge.

Per first support :

1- As per sketch No. 1 ‘

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per support after first one :

9-As per sketch No.l

10- As per sketch No, 2 ....

11- As per sketch No. 3

12- As per sketch No. 4

4Q60-18 Straightened. Rate

Includes straightening old auxiliary reservoir support when same has be-
come bent or twisted.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per support after first one :

9-As per sketch No.l

10- As per sketch No. 2

11- As per sketch No. 3

12- As per sketch No. 4

AIR BRAKE MECHANISM— ENGINE BRAKES
Reservoir, Auxiliary — Support

AIR BRAKE MECHANISM.

205

Reservoir, Auxiliary
SUPPORT

4Q60-21 Welded (break). Rate....,

Includes doing necessary scarfing, welding break in auxiliary reservoir sup-
port, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 -

4- As per sketch No. 4

Per place repaired after first one :

9- As per sketch No. 1

10- As per sketch 'No. 2

11- As per sketch No. 3

12- As per sketch No. 4

4Q60-21 Welded (crack). Rate...

Includes making dutchman, welding same in crack in auxiliary reservoir
support, dressing and finishing over weld complete.

Forge.

Per first place repaired ;

17- As per sketch No. 1

18- As per sketch No. 2 '

19- As per sketch No. 3

20- As per sketch No. 4

Per place repaired after first one :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4

4Q60-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in auxiliary reservoir support,
dressing and finishing over weld complete.

Forge.

Per first hole :

33- As per sketch No. 1

34- As per sketch No. 2

35- As per sketch No. 4

Per hole after first one :

40- As per sketch No. 1

41- As per sketch No. 2

42- As per sketch No. 4

AIR BRAKE MECHANISM— ENGINE BRAKES

Reservoir, Auxiliary — Support

206

BLACKSMITH SHOP SCHEDULES.

Reservoir, Equalizer
SUPPORT

4Q72 Note.

For operations on equalizer reservoir support, see Schedule No. 4Q60, under
auxiliary reservoir support.

AIR BRAKE MECHANISM— ENGINE BRAKE
Reservoir, Equalizer — Support

AIR BRAKE MECHANISM.

207

Reservoir, Main
SUPPORT

M?//? Reserwir Support

M///? /?eserpv/r Supports.

AIR BRAKE MECHANISM— ENGINE BRAKES

Reservoir, Main, Support

208

BLACKSMITH SHOP SCHEDULES.

Reservoir, Main
SUPPORT

Afa//7 ffesery'O/r Sopport.

s

Main Reservoir Supports

AIR BRAKE MECHANISM— ENGINE BRAKES
Reservoir, Main, Support

AIR BRAKE MECHANISM.

209

Reservoir, Main
SUPPORT

Main Reservoir Supports

4Q76-2 Bend changed.

Includes changing bend in main reservoir support.

Rate.

Forge.

Per first bend changed :

1- As per sketch No.

2- As per sketch No.

3- As per sketch No.

4- As per sketch No.

5- As per sketch No.

6- As per sketch No.

7- As per sketch No.

8- As per sketch No.

1

2

5

6, per one half

7

8

9

10

Per bend changed after first one :

13- As per sketch No. 1

14- As per sketch No. 2

15- As per sketch No. 5

16- As per sketch No. 6, per half after first half

17- As per sketch No. 7

18- As per sketch No. 8

19- As per sketch No. 9

20- As per sketch No. 10 . .

AIR BRAKE MECHANISM— ENGINE BRAKES

Reservoir, Main, Support

210

BLACKSMITH SHOP SCHEDULES.

Reservoir, Main
SUPPORT

4Q76-12 Lengthened or shortened. Rate

Includes lengthening or shortening main reservoir support by drawing out
or upsetting same.

Forge.

Per first place lengthened or shortened :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 5 . .

4- As per sketch No. 6, per one half

5- As per sketch No. 7

6- As per sketch No. 8

7- As per sketch No. 9

8- As per sketch No. 10

9- As per sketch No. 11, top half

10- As per sketch No. 11, bottom half

11- As per sketch No. 12, top half

12- As per sketch No. 12, bottom half

Per place lengthened or shortened after first one :

17- As per sketch No.l

18- As per sketch No. 2 ....

19- As per sketch No. 5

20- As per sketch No. 6, per half after first half

21- As per sketch No. 7

22- As per sketch No. 8

23- As per sketch No. 9

24- As per sketch No. 10

25- As per sketch No. 11, top half

26- As per sketch No. 11, bottom half

27- As per sketch No. 12, top half

28- As per sketch No. 12, bottom half

4Q76-13 Made. Rate

Includes getting material for main reservoir support, forging, bending,
dressing and finishing complete.

Steam hammer.

Per first support ;

1-As per sketch No. 1

Per support after first one :

4-As per sketch No.l

Forge.

Per first support :

9-As per sketch No. 1

10- As per sketch No. 2

11- As per sketch No. 3

12- As per sketch No. 4

(Continued on page 211.)

AIR BRAKE MECHANISM— ENGINE BRAKES
Reservoir, Main, Support

AIR BRAKE MECHANISM.

211

Reservoir, Main
SUPPORT

(Continued from page 210.)

13- As per sketch No. 5

14- As per sketch No. 6, per one half

15- As per sketch No. 7

16- As per sketch No. 8

17- As per sketch No. 9

18- As per sketch No. 10

19- As per sketch No. 11, top half

20- As per sketch No. 11, bottom half

21- As per sketch No. 12, top half

22- As per sketch No. 12, bottom half

Per support after first one :

27- As per sketch No. 1

28- As per sketch No. 2

29- As per sketch No. 3

30- As per sketch No. 4

31- As per sketch No. 5

32- As per sketch No. 6, per half after first half

33- As per sketch No. 7

34- As per sketch No. 8

35- As per sketch No. 9

36- As per sketch No. 10

37- As per sketch No. 11, top half

38- As per sketch No. 11, bottom half

39- As per sketch No. 12, top half

40- As per sketch No. 12, bottom half

4Q76-13 Made (at bulldozer). Rate

Includes changing dies in bulldozer, bending and finishing main reservoir
support after iron has been delivered to bulldozer.

Per first support :

45- As per sketch No. 3

46- As per sketch No. 4

Per support after first one :

51- As per sketch No. 3. . ,

52- As per sketch No. 4

4Q76-18 Straightened. Rate

Includes straightening old main reservoir support when same has become
bent or twisted.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

(Continued on page 212.)

AIR BRAKE MECHANISM— ENGINE BRAKES

Reservoir, Main, Support

212

BLACKSMITH SHOP SCHEDULES.

Reservoir, Main
SUPPORT

(Continued from page 211.)

5- As per sketch No.

6- As per sketch No.

7- As per sketch No.

8- As per sketch No.

9- As per sketch No.

10- As per sketch No.

11- As per sketch No.

12- As per sketch No.

13- As per sketch No.

14- As per sketch No.

Per place repaired after

19- As per sketch No.

20- As per sketch No.

21- As per sketch No.

22- As per sketch No.

23- As per sketch No.

24- As per sketch No.

25- As per sketch No.

26- As per sketch No.

27- As per sketch No.

28- As per sketch No.

29- As per sketch No.

30- As per sketch No.

31- As per sketch No.

32- As per sketch No.

5

6, per one half

7

8

9

10

11, upper half.

11, lower half.

12, upper half .
12, lower half .

first one :

1

2

3

4

5

6, per half after first half

7

8

9

10

11, upper half

11, lower half

12, upper half

12, lower half

4Q76-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in main reservoir support,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 5 .’

4- As per sketch No. 6, per one half

5- As per sketch No. 7

6- As per sketch No. 8

7- As per sketch No. 9

8- As per sketch No. 10

9- As per sketch No. 11, upper half

10- As per’sketch No. 11, lower half

11- As per sketch No. 12, upper half

12- As per sketch No. 12, lower half

AIR BRAKE MECHANISM— ENGINE BRAKES
Reservoir, Main, Support

AIR BRAKE MECHANISM.

213

Reservoir, Main
SUPPORT

Per place repaired after first one :

17- As per sketch No. 1

» 18-As per sketch No. 2

19- As per sketch No. 5

20- As per sketch No. 6, per half after first half

21- As per sketch No. 7

22- As per sketch No. 8

23- As per sketch No. 9

24- As per sketch No. 10

25- As per sketch No. 11, upper half

26- As per sketch No. 11, lower half

27- As per sketch No. 12, upper half

28- As per sketch No. 12, lower half

4Q76-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in main reservoir sup-
port, dressing and finishing over weld complete.

Forge.

Per first place repaired :

33- As per sketch No. 1

34- As per sketch No. 2

35- As per sketch No. 3

36- As per sketch No. 4

37- As per sketch No. 5

38^As per sketch No. 6, per one-half

39- As per sketch No. 7

40- As per sketch No. 8

41- As per sketch No. 9

42- As per sketch No. 10

43- As per sketch No. 11, upper half

44- As per sketch No. 11, lower half

45- As per sketch No. 12, upper half

46- As per sketch No. l2, lower half

Per place repaired after first one :

51- As per sketch No. 1

52- As per sketch No. 2

53- As per sketch No. 3

54- As per sketch No. 4

55- As per sketch No. 5

56- As per sketch No. 6, per half after first half

57- As per sketch No. 7

58- As per sketch No. 8

59- As per sketch No. 9

60- As per sketch No. 10

61- As per sketch No. 11, upper half

62- As per sketch No. 11, lower half

63- As per sketch No. 12, upper half

64- As per sketch No. 12, lower half

AIR BRAKE MECHANISM— ENGINE BRAKES

Reservoir, Main, Support

214

BLACKSMITH SHOP SCHEDULES.

Reservoir, Main
SUPPORT

4Q76-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in main reservoir support,
dressing and finishing over weld complete.

Forge.

Per first hole plugged :

69- As per sketch No. 1 . . . ’

70- As per sketch No. 3

71- As per sketch No. 4

72- As per sketch No. 6, per one-half

73- As per sketch No. 8

74- As per sketch No. 9

75- As per sketch No. 10

76- As per sketch No. 11, upper half

77- As per sketch No. 11, lower half

78- As per sketch No. 12, upper half

79- As per sketch No. 12, lower half

Per hole plugged after first one :

84- As per sketch No. 1

85- As per sketch No. 3

86- As per sketch No. 4

87- As per sketch No. 6, per half after first half

88- As per sketch No. 8

89- As per sketch No. 9

90- As per sketch No. 10

91- As per sketch No. 11, upper half

92- As per sketch No. 11, lower half

93- As per sketch No. 12, upper half

94- As per sketch No. 12, lower half

4Q76-21 Welded (new ends). Rate.

Includes welding stock on main reservoir support for new end, dressing and
finishing to shape complete.

Forge.

Per first end :

99- As per sketch No. 5

100- As per sketch No. 7

101- As per sketch No. 9 — .

Per end after first one :

105- As per sketch No. 5

106- As per sketch No. 7

107- As per sketch No. 9

AIR BRAKE MECHANISM— ENGINE BRAKES
Reservoir, Main, Support

Valve, Distributing
BRACKET

AIR BRAKE MECHANISM.

215

4Q90-2 Bend changed. Rate.

Includes changing bend in distributing valve bracket.

Forge.

Per first bend changed :

1- As per sketch No. 1, upper half

2- As per sketch No. 1, lower half

3- As per sketch No. 2

Per bend changed after first one :

9-As per sketch No. 1, upper half

10- As per sketch No. 1, lower half

11- As per sketch No. 2

4Q90-12 Lengthened or shortened. Rate. ..

Includes lengthening or shortening distributing valve bracket by drawing
out or upsetting same.

Forge.

Per first bracket :

1- As per sketch No. 1, upper half

2- As per sketch No, 1, lower half

3- As per sketch No. 2

Per bracket after first one :

9-As per sketch No. 1, upper half

10- As per sketch No. 1, lower half

11- As per sketch No. 2

AIR BRAKE MECHANISM— ENGINE BRAKES

Valve, Distributing — Bracket

216

BLACKSMITH SHOP SCHEDULES.

Valve, Distributing

BRACKET

4Q90-13 Made. Rate

Includes getting material for distributing valve bracket, forging, dressing
and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1, upper half

2- As per sketch No. 1, lower half

3- As per sketch No. 2

Per bracket after first one :

9-As per sketch No. 1, upper half

10- As per sketch No. 1, lower half

11- As per sketch No. 2

4Q90-18 Straightened. Rate

Includes straightening old distributing valve bracket when same has be-
come bent or twisted.

Forge.

Per first bracket :

1- As per sketch No. 1, upper half.

2- As per sketch No. 1, lower half

3- As per sketcli No. 2

Per bracket after first one :

8- As per sketch No. 1, upper half

9- As per sketch No. 1, lower half

10-As per sketch No. 2

4Q90-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in distributing valve
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1, upper half

2- As per sketch No. 1, lower half

3- As per sketch No. 2

Per place repaired after first one :

8- As per sketch No. 1, upper half

9- As per sketch No. 1, lower half

10-As per sketch No. 2

AIR BRAKE MECHANISM— ENGINE BRAKES
Valve, Distributing — Bracket

AIR BRAKE MECHANISM.

217

Valve, Distributing
BRACKET

4Q90-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in distributing valve
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

15- As per sketch No. 1, upper half

16- As per sketch No. 1, lower half

17- As per sketch No. 2

Per place repaired after first one :

22- As per sketch No. 1, upper half

23- As per sketch No. 1, lower half

24- As per sketch No. 2

4Q90-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in distributing valve bracket,
dressing and finishing over weld complete.

Forge.

Per first hole :

29- As per sketch No. 1, upper half

30- As per sketch No. 1, lower half

31- As per sketch No. 2

Per hole after first one :

35- As per sketch No. 1, upper half

36- As per sketch No. 1, lower half

37- As per sketch No. 2

AIR BRAKE MECHANISM— ENGINE BRAKES

Valve, Distributing — Bracket

218

BLACKSMITH SHOP SCHEDULES.

Valve, Engineer’s Brake
BRACKET

r/?a//7eer'j

prone

n'o/re

Sracnet.

£n^//7eer5 Brone KaJ/e Broaxet^.

Q Q

£‘r?<^//7eer's Braf\e It7/re BracfXets

Includes changing bend in engineer’s brake valve bracket.

Forge.

Per first bend changed :

1-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7
Per bend changed after first one :

12-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7.

4Q96-12 Lengthened or shortened. Rate

Includes lengthening or shortening engineer’s brake valve bracket by draw-
ing out or upsetting same.

Forge.

Per first bracket :

1-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

Per bracket after first one :

12-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7,

AIR BRAKE MECHANISM— ENGINE BRAKES
Valve, Engineer’s Brake — Bracket

AIR BRAKE MECHANISM.

219

Valve, Engineer’s Brake
BRACKET

4Q96-13 Made. Rate

Includes getting material for engineer’s brake valve bracket, forging, bend-
ing, dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7 ; ,

Per bracket after first one :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

15- As per sketch No. 4

16- As per sketch No. 5

17- As per sketch No. 6

18- As per sketch No.7

4Q96-18 Straightened. Rate

Includes straightening old engineer’s brake valve bracket when same has
become bent or twisted.

Forge.

Per first bracket :

1-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

Per bracket after first one :

12-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

4Q96-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in engineer’s brake valve
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

Per place repaired after first one :

12-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

AIR BRAKE MECHANISM— ENGINE BRAKES

Valve, Engineer’s Brake — Bracket

220

BLACKSMITH SHOP SCHEDULES.

Valve, Engineer’s Brake
BRACKET

4Q96-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in engineer’s brake valve
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

23-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

Per place repaired after first one :

34-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

4Q96-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in engineer’s brake valve bracket,
dressing and finishing over weld complete.

Forge.

Per first hole. :

45-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

Per hole after first one :

56-As per sketches Nos. 1, 2, 3, 4, 5, 6, 7

AIR BRAKE MECHANISM— ENGINE BRAKES
Valve, Engineer’s Brake — Bracket

AIR BRAKE MECHANISM.

221

Valve, Feed

BRACKET

/~eecf Ka/yp
3rac/<eT

o

o~o

o o

4Q100-2 Bend changed. Rate

Includes changing bend in feed valve bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4 Q 100-12 Lengthened or shortened. Rate

Includes lengthening or shortening feed valve bracket by drawing out or
upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4Q100-13 Made. Rate

Includes getting material for feed valve bracket, forging, dressing and fin-
ishing complete.

Forge :

1- Per'first bracket

2- Per bracket after first one

4Q100-18 Straightened. Rate

Includes straightening old feed valve bracket when same has become bent
or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Valve, Feed — Bracket

222

BLACKSMITH SHOP SCHEDULES.

Valve, Feed

BRACKET

4Q100-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in feed valve bracket,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired. .

2- Per place repaired after first one

4Q100-21 Welded (crack). Rate...

Includes making dutchman, welding same in crack in feed valve bracket,
dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4Q100-21 Welded (holes plugged). . Rate

Includes making plug, welding same in hole in feed valve bracket, dressing
and finishing over weld complete.

Forge :

11- Per first hole

12- Per hole after first one

AIR BRAKE MECHANISM— ENGINE BRAKES
Valve, Feed — Bracket

AIR BRAKE MECHANISM.

223

Valve, Signal
BRACKET

S/^m/

BracHet

4Q110-2 Bend changed. Rate

Includes changing bend in signal valve bracket.

Forge :

1- Per first bend changed -

2- Per bend changed after first one

4Q110-12 Lengthened or shortened. Rate

Includes lengthening or shortening signal valve bracket by drawing out or
upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4Q110-13 Made. Rate

Includes getting material for signal valve bracket, forging dressing and
finishing complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4Q11Q-18 Straightened. Rate

Includes straightening old signal valve bracket when same has become bent
or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

4Q110-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in signal valve bracket,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

AIR BRAKE MECHANISM— ENGINE BRAKES

Valve, Signal — Bracket

224

BLACKSMITH SHOP SCHEDULES.

Valve, Signal
BRACKET

4Q110-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in signal valve bracket,
dressing and finishings over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4Q110-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in signal valve bracket, dressing
and finishing over weld complete.

Forge :

11- Per first hole

12- Per hole after first one

AIR BRAKE MECHANISM—ENGINE BRAKES
Valve, Signal — Bracket

AIR BRAKE MECHANISM.

225

Tender Brakes

CYLINDER BRACKET

Tender Brake Cylinder Brackets.

4Q200-2 Bend changed.

Forge.

As per sketch No. 2 :

1- Per first bend changed

2- Per bend changed after first one .

4Q200-2 Bent (at bulldozer). Rate

Includes bending, at bulldozer, tender brake cylinder bracket after iron has
been delivered to bulldozer. Includes changing dies.

As per sketch No. 2 :

7- Per first bracket

8- Per bracket after first one

4Q200-4 Cut — Iron. Rate

Includes cutting iron, at power shears, for tender brake cylinder bracket.
Power shears :

1-Per piece cut

4Q200-9 Forged. Rate

Includes getting material, blocking out and forging complete, ready for
dressing or malang finished, tender brake cylinder bracket.

Forge :

1- Per first bracket

2- Per bracket after first one

AIR BRAKE MECHANISM— TENDER BRAKES

Cylinder Bracket

226

BLACKSMITH SHOP SCHEDULES.

Tender Brakes

CYLINDER BRACKET

4Q200-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender brake cylinder bracket by drawing
out or upsetting same.

Forge.

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

7- As per sketch No.l

8- As per sketch No. 2

4Q200-13 Made complete. . ^ Rate

Includes getting material for tender brake cylinder bracket, forging, bending,
dressing and finishing complete.

Forge.

Per first bracket :

1- As per sketch No. 1, iron forged

2- As per sketch No. 2, from bar iron

Per bracket after first one :

7- As per sketch No. 1, iron forged

8- As per sketch No. 2, from bar iron

4Q200-18 Straightened. Rate

Includes straightening old tender brake cylinder bracket when same has
become bent or twisted.

Forge. I

Per first bracket :

1- As per sketch No. 1

2- As per sketch No. 2

Per bracket after first one :

7- As per sketch No. 1

8- As per sketch No. 2

AIR BRAKE MECHANISM— TENDER BRAKES
Cylinder Bracket

AIR BRAKE MECHANISM.

227

Tender Brakes

CYLINDER BRACKET

4Q200-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender brake cylinder
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

4Q200-21 Welded (crack). Rate .

Includes making dutchman, welding same in crack in tender brake cylinder
bracket, dressing and finishing over weld complete.

Forge.

Per first place repaired :

13- As per sketch No. 1

14- As per sketch No. 2

Per place repaired after first one :

19- As per sketch No. 1

20- As per sketch No. 2

4Q200-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender brake cylinder bracket,
dressing and finishing over weld complete.

Forge ;

25- Per first hole plugged

26- Per hole plugged after first one

AIR BRAKE MECHANISM— TENDER BRAKES

Cylinder Bracket

228

BLACKSMITH SHOP SCHEDULES.

Tender Brakes

RESERVOIR, AUXILIARY— SUPPORT

Tender Hux/hary Reservoir 6upports

^ s

4Q250-2 Bend changed.

Rate.

Includes changing bend in tender brake auxiliary reservoir support.
Forge.

Per first bend changed :

1- As per sketch No.l ;

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per bend changed after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

AIR BRAKE MECHANISM— TENDER BRAKES
Reservoir, Auxiliary Support

AIR BRAKE MECHANISM.

229

Tender Brakes

RESERVOIR, AUXILIARY— SUPPORT
4Q260-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender brake auxiliary reservoir support.
Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per support after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

4Q260-13 Made. Rate

Includes getting material for tender brake auxiliary reservoir support, forg-
ing, bending, dressing and»finishing complete.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per support after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

4Q260-18 Straightened. Rate

Includes straightening old tender brake auxiliary reservoir support when
same has become bent or twisted.

Forge.

Per first support :

1-As per sketches Nos. 1, 2, 3, 4, 5

Per support after first one :

10-As per sketches Nos. 1, 2, 3, 4, 5

AIR BRAKE MECHANISM— TENDER BRAKES

Reservoir, Auxiliary Support

230

BLACKSMITH SHOP SCHEDULES.

Tender Brakes

RESERVOIR, AUXILIARY— SUPPORT

4Q250-21 Welded (break). Rate...

Includes doing necessary scarfing, welding break in tender brake auxiliary
reservoir support.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketches Nos. 2, 3, 4, 5

Per place repaired after first one :

10- As per sketch No.l

11- As per sketches Nos. 2, 3, 4, 5

4Q250-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender brake auxiliary
reservoir support, dressing and finishing over weld complete.

Forge. ^

Per first place repaired :

19- As per sketch No. 1

20- As per sketches Nos. 2, 3, 4, 5

Per place repaired after first one :

28- As per sketch No.l

29- As per sketches Nos. 2, 3, 4, 5

4Q250-21 Welded (holes plugged). Rate.

Includes making plug, welding same in hole in tender brake auxiliary reser-
voir support, dressing and finishing over weld complete.

Forge.

Per first hole plugged :

37-As per sketches Nos. 2, 3, 4, 5

Per hole plugged after first one :

45-As per sketches Nos. 2, 3, 4, 5

AIR BRAKE MECHANISM— TENDER BRAKES
Reservoir, Auxiliary Support

AIR BRAKE MECHANISM,

231

Tender Brakes

ROD, PUSH

4Q260-12 Lengthened or shortened (by drawing out or upsetting) .

Rate

Includes lengthening or shortening tender brake push rod by drawing out or
upsetting same.

Forge :

1- Per first push rod

2- Per push rod after first one

4Q260-12 Lengthened (by welding). Rate

Includes cutting rod in two, doing necessary scarfing, welding in required new
material, dressing and finishing tender brake push rod to length complete.

Forge :

7- Per first weld in rod

8- Per weld in rod after first one

4Q260-13 Made. Rate

Includes getting material, blocking out and forging tender brake push rod
with jaw ends made solid from material or from flat iron, welding ends on
body of rod, dressing and finishing rod complete.

Forge.

When jaw ends are forged from solid material :

1- Per first rod

2- Per rod after first one

When jaw is made from flat iron :

7- Per first rod

8- Per rod after first one

4Q260-17 Shortened (by welding). Rate

Includes cutting push rod in two, taking out required stock, doing necessary
scarfing and making weld, dressing and finishing tender brake push rod to
shortened length complete.

Forge :

1- Per first rod

2- Per rod after first one

4Q260-18 Straightened. Rate

Includes straightening old tender brake push rod when same has become bent.
Forge :

1- Per first rod

2- Per rod after first one

AIR BRAKE MECHANISM— TENDER BRAKES

Rod, Push

232

BLACKSMITH SHOP SCHEDULES,

Tender Brakes
ROD, PUSH

4Q260-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender brake push rod,
dressing and finishing over weld complete.

Forge :

1- Per place first repaired

2- Per place repaired after first one

4Q260-21 Welded (crack). Rate. -

Includes making dutchman, welding same in crack in tender brake push rod,
dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4Q260-21 Welded (ends). Rate

Includes doing necessary scarfing, welding end on tender brake push rod,
dressing and finishing over weld complete.

Forge :

1 1- Per first end

12- Per end after first one

AIR BRAKE MECHANISM— TENDER BRAKES
Rod, Push

AIR BRAKE MECHANISM.

233

Tender Brakes

ROD, PUSH— END, JAW

4Q262-2 Bent. Rate...

Includes bending iron for tender brake push rod jaw end in machine after
iron has been cut and punched.

Machine :

1- Per first jaw

2- Per jaw after first one

4Q262-4 Cut — Iron. Rate

Includes cutting iron for tender brake push rod jaw end, at power shears.
Power shears :

1-Per jaw

4Q262-9 Forged and dressed. Rate. ..

Includes getting material, blocking out, forging, dressing and finishing com-
plete, jaw end of tender brake push rod.

Forge.

Per first jaw end :

1- Jaw 3" or less in width

2- Jaw over 3" in width

Per jaw end after first one :

7- Jaw 3" or less in width

8- Jaw over 3" in width

4Q262-18 Straightened. Rate...

Includes straightening old tender brake push rod jaw end when same has
become bent or twisted.

Forge :

1- Per first jaw end

2- Per jaw end after first one ...:

4Q262-21 Welded (on body only). Rate

Includes doing necessary scarfing and welding jaw end of tender brake push
rod on rod body, dressing and finishing over weld complete.

Forge :

1-Per first jaw end

, 2-Per jaw end after first one

AIR BRAKE MECHANISM— TENDER BRAKES

Rod, Push — Jaw End

BOILER

BOILER

Dome

BRACE END

4R10-6 Dressed. Rate

Includes dressing and finishing complete, dome brace end after end has
been forged.

Forge :

1- Per first end

2- Per end after first one

4R10-9 Forged. Rate

Includes getting material, blocking out and forging dome brace end complete,
ready for dressing.

Steam hammer :

1- Per first end •-

2- Per end after first one

Forge :

3- Per first end

4- Per end after first one

4R10-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing dome
brace end complete.

Forge :

7- Per first end.

8- Per end after first one

4R10-18 Straightened. Rate

Includes straightening old dome brace end when same has become bent or
twisted.

Forge :

1- Per first end

2- Per end after first one

237

BOILER
Dome Brace End

238 -

BLACKSMITH SHOP SCHEDULES.

Dome

BRACE END

4R10-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dome brace end, dress-
ing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4R10-21 Welded (holes plugged). ^ Rate

Includes making plug, welding same m hole in dome brace end, dressing and
finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

BOILER

Dome Brace End

BOILER.

239

Dome

BRACE LUG

Dome Brace Lugs

3 4

4R14-6 Dressed. Rate

Includes dressing ends and finishing complete, dome brace lug after lug
has been forged.

Forge.

Per first lug :

1- As per sketch No.l

2- As per sketch No. 2

3^As per sketch No. 3

Per lug after first one :

6- As per sketch No. 1 — .

7- As per sketch No. 2

8- As per sketch No. 3

4R14-9 Forged. Rate

Includes getting material for dome brace lug, blocking out and forging com-
plete, ready for dressing.

Steam hammer.

Per first lug ;

1- As per sketch No. 1

2- As per sketch No. 2

* 3-As per sketch No. 3

Per lug after first one :

5- As per sketch No. 1

6- As per sketch No. 2

7- As per sketch No. 3

BOILER
Dome Brace Lug

240

BLACKSMITH SHOP SCHEDULES.

Dome

BRACE LUG

Forge.

Per first lug ;

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

Per lug after first one :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

4R14-9 Forged and dressed. Rate

Includes getting material for dome brace lug, blocking out, forging, dressing
and finishing complete.

Forge.

Per first lug :

20- As per sketch No.l

21- As per sketch No. 2

22- As per sketch No. 3 . .

23- As per sketch No. 4

Per lug after first one :

27- As per sketch No. 1

28- As per sketch No. 2

29- As per sketch No. 3

30- As per sketch No. 4

4R14-18 Straightened. Rate.....

Includes stiaightening old dome brace lug when same has become bent or
twisted.

Forge.

Per first lug :

1-As per sketches Nos. 1, 2, 3, 4

Per lug after first one :

8- As per sketches Nos. 1, 2, 3, 4

4R14-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dome brace lug, dress-
ing and finishing over weld complete.

Forge.

Per first place repaired :

1-As per sketches Nos. 1, 2, 3, 4

Per place repaired after first one :

8-As per sketches Nos. 1, 2, 3, 4 ,

BOILER

Dome Brace Lug

BOILER.

241

Dome

BRACE LUG

4R14“21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dome brace lug, dressing and
finishing over weld complete.

Forge.

Per first hole :

15-As per sketches Nos. 1, 2, 3, 4

Per hole after first one :

21-As per sketches Nos. 1, 2, 3, 4

BOILER
Dome Brace Lug

242

BLACKSMITH SHOP SCHEDULES.

Dome

RING

Do/ve Pfng

4R18-9 Forged. Rate

Includes getting material, blocking out and forging iron complete, for dome
ring.

Steam hammer :

1- Per first ring

2- Per ring after first one

Forge :

3- Per first ring '

4- Per ring after first one

4R18-9 Forged and dressed. Rate

Includes getting material for dome ring, blocking out, forging, scarfing,
bending, welding and dressing complete.

Forge :

7- Per first ring

8- Per ring after first one.

4R18-13 Made (from bar iron). Rate

^ Includes getting bar iron for dome ring, bending, scarfing, welding and
finishing complete.

Forge :

1- Per first ring

2- Per ring after first one ?

4R18-16 Scarfed. Rate

Includes scarfing ends of dome ring before same have been rolled, complete,
ready for welding.

Forge :

1- Per first ring

2- Per ring after first one

BOILER

Dome Ring

BOILER.

243

Dome

RING

4R18-18 Straightened. Rate

Includes straightening old dome ring when same has become bent or twisted.
Forge :

1- Per first ring

2- Per ring after first one

4R18-21 Welded only (after ring has been rolled and scarfed). Rate

Includes getting dome ring after same has been rolled and scarfed, making
weld in ring, dressing and finishing over weld complete.

Forge :

1- Per first weld

2- Per weld after first one

4R18-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in dome ring, dressing and
finishing over weld complete.

Forge :

' 5-Per first place repaired

6-Per place repaired after fiist one

4R18-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dome ring, dressing
and finishing over weld complete.

Forge :

9-Per first place repaired

10-Per place repaired after first one

4R18-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dome ring, dressing and finish-
ing over weld complete.

Forge :

13- Per first hole

14- Per hole after first one

BOILER
Dome Ring

244

BLACKSMITH SHOP SCHEDULES.

Firebox

BAR, CROWN

Firebox Crown Bcr re

4R30-2 Bent — Iron. Rate...

Includes changing dies in machine if necessary, and bending iron for crown
bar after iron has been cut.

Forge :

1- Per first piece bent

2- Per piece bent after first one

Machine :

3- Per first piece bent

4- Per piece bent after first one

4R30-2 Bent (toe to fit sheet). Rate

Includes bending toe of crown bar to fit side sheet, end cutting off end of bar
if necessary.

Forge :

1- Per first end

2- Per end after first one

4R30-4 Cut — Iron. Rate

Includes cutting iron for body of crown bar at power shears.

Power shears :

1-Per piece cut

BOILER

Firebox Crown Bar

BOILER.

245

Firebox

BAR, CROWN

4R30-9 Forged (toes only). Rate

Includes getting material, blocking out and forging toes of crown bar.
Steam hammer ;

1- Per first toe

2- Per toe after first one

Forge :

3- Per first toe -

4- Per toe after first one

4R30-12 Lengthened or shortened. Rate

Includes lengthening or shortening crown bar by drawing out or upsetting
toe end or remodel end.

Forge :

1- Per first bar

2- Per bar after first one

4R30-18 Straightened. Rate

Includes straightening old crown bar when same has become bent or twisted.
Forge :

1- Per first bar

2- Per bar after first one

4R30-21 Welded and dressed (parts together). Rate

Includes getting body of crown bar after iron has been cut, and toe after
same has been forged, welding on toe, dressing and finishing bar to shape
complete.

Forge :

1- Per first bar

2- Per bar after first one

4R30-21 Welded (new toe end). Rate

Includes repairing crown bar toe end by jumping on material for new end,
dressing and finishing end complete.

Forge :

5- Per fiist end

6- Per end after first one

BOILER

Firebox Crown Bar

246

BLACKSMITH SHOP SCHEDULES.

Firebox

BAR, GROWN

4R30-21 Welded (new side on end of bar). Rate

Includes doing necessary scarfing, welding on required new stock where end
is broken on side in old weld, dressing and finishing end and toe to shape com-
plete ; includes making toe.

Forge.

Per first end :

10- When welded on one side of end

11- When welded on both sides of end

Per end after first one :

15- When welded on one side of end

16- When welded on both sides of end

4R30-21 Welded (dutchman on corner of toe). Rate

Includes making dutchman, welding same on corner of toe, dressing and
finishing end of toe complete.

Forge : v

20- Per first place repaired

21- Per place repaired after first one

4R30-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in crown bar, dressing and
finishing over weld complete.

Forge :

25- Per first hole

26- Per hole after first one

4R30-21 Welded (split end). Rate

Includes heating and welding complete, split end of crown bar.

Forge :

30- Per first end

31- Per end after first one t

BOILER

Firebox Crown Bar

BOILER.

247

Firebox

BAR, CROWN— BOLT

\

F/rebox Croivn
Bar Softs

/ ^

4R32— 4 Oiiti — Iron* Rftte

Includes cutting iron for crown bar bolt at power shears.

Power shears :

1-Per piece cut

4R32-13 Made (at forge). Rate

Includes getting material, forging end of crown bar bolt, welding same on
bolt rod, dressing and finishing bolt to shape complete.

Forge.

Per first bolt :

1- As per sketch No. 1

2- As per sketch No. 2

Per bolt after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER

Firebox Crown Bar Bolt

248

BLACKSMITH SHOP SCHEDULES.

Firebox

BAR, CROWN— BOLT

4R32-13 M?ide (at machine). Rate

Includes changing dies in forging machine, forging crown bar bolt complete,
after iron has been delivered at machine.

Machine.

Per first bolt :

10- As per sketch No. 1

11- As per sketch No. 2

Per bolt after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4R32-21 Welded (to adjust length). Rate

Includes welding in necessary stock on crown bar bolt to adjust bolt to length
complete.

Forge.

Per first bolt :

1- As per sketch No.l

2- As per sketch No. 2

Per bolt after first one :

5- As per sketch No.l

6- As per sketch No. 2

BOILER

Firebox Crown Bar Bolt

BOILER.

249

Firebox ^

BAR, CROWN— BOLT WASHER

Firebox Crorrn Bpr Bolt Washers
/ 2

4R36-2 Bent (at bulldozer). Rate

Includes changing dies in machine, bending iron for crown bar bolt washer
at bulldozer after iron has been cut and punched.

Bulldozer :

1- Per first washer

2- Per washer after first one

4R36-4 Cut — Iron. Rate

Includes cutting iron at power shears for crown bar bolt washer.

Power shears :

1-Per piece cut as per sketch No. 2

4R36-13 Made. Rate

Includes getting material for crown bar bolt washer, forging, bending, dress-
ing and finishing complete.

Forge.

Per first washer :

1- As per sketch No.l

2- As per sketch No. 2

Per washer after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4R36-15 Punched. Rate

Includes changing dies in power punch and punching hole in crown bar bolt
washer.

Power punch.

Per first washer :

1- As per sketch No. 1

2- As per sketch No. 2

Per washer after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER

Firebox Crown Bar Bolt Washer

250

BLACKSMITH SHOP SCHEDULES.

Firebox

BAR, CROWN— BOLT WASHER

4R36-18 Straightened. Rate

Includes straightening old crown bar bolt washer when same has become bent.
Forge.

Per first washer :

1- As per sketch No. 1

2- As per sketch No. 2

Per washer after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER

Firebox Crown Bar Bolt Washer

BOILER.

251

Firebox

BAR, CROWN— SLING

Firebox Crown

Bar S/ing

4R40-2 Bent (at bulldozer). Rate

Includes bending iron for crown bar sling at bulldozer after iron has been
cut at power shears.

1- Per first sling

2- Per sling after first one

4R40-4 Cut — Iron. Rate

Includes cutting iron for crown bar sling at power shears.

Power shears :

1-Per piece cut

4R40-6 Dressed and welded. Rate

Includes dressing crown bar sling after same has been bent at bulldozer,
welding and finishing sling complete.

Forge :

1- Per first sling ?

2- Per shng after first one

4R40-12 Lengthened or shortened. Rate

Includes lengthening or shortening crown bar sling by drawing out or up-
setting same.

Forge :

1- Per first sling ^

2- Per sling after first one

4R40-13 Made. Rate

Includes getting material for crown bar sling, forging, bending, dressing,
welding and finishing complete.

Forge :

1- Per first sling

2- Per sling after first one

4R40-18 Straightened. Rate

Includes straightening old crown bar sling when same has become bent.
Forge : '

1- Per first sling

2- Per sling after first one

BOILER

Firebox Crown Bar Sling

252

BLACKSMITH SHOP SCHEDULES.

BOILER

Firebox Mud Ring

BOILER.

253

Firebox

RING, MUD

Firebox Mucf Ring

Firebox Mud Ring

BOILER

Firebox Mud Ring

254

BLACKSMITH SHOP SCHEDULES.

Firebox

RING, MUD

Kirebox Mud Ring

Firebox Mud Ring

Firebox Mud Ring

BOILER.

255

Firebox

RING, MUD

Firebox Mud Ring

No additional time is to be allowed for taking old or new mudrings in or out
of blacksmith shop, putting mudrings on wheels or supporter bar or clamps
on mudrings. Times for these operations are included in all forging, scarf-
ing, welding and repairing operations.

4R60-9 Forged (sides and ends separately). Rate

Includes getting material, blocking out and forging complete, ready for
scarfing, sides, ends or halves of mudring as designated in the following
classification. (See note, above.)

Steam hammer.

Per first side, end or half :

1- As per sketches Nos. 1, 2, 3, 4, side

2- As per sketches Nos. 1, 2, 3, 4, end

9-As per sketch No. 5, side

10- As per sketch No. 5, front end

11- As per sketch No. 5, back end

12- As per sketch No. 6, side

13- As per sketch No. 6, end

14- As per sketch No. 7, side

15- As per sketch No. 7, end

16- As per sketch No. 8, side

17- As per sketch No. -8, end

18- As per sketch No. 9, side

19- As per sketch No. 9, front end

20- As per sketch No. 9, bank end

21- As per sketch No. 10, one half

22- As per sketch No. 11, side

23- As per sketch No. 11, front end

24- As per sketch No. 11, back end

25- As per sketch No. 12, side

26- As per sketch No. 12, end

27- As per sketch No. 13, one half

BOILER

Firebox Mud Ring

256

BLACKSMITH SHOP SCHEDULES.

Firebox

RING, MUD

Per side, end or half after first one :

35- As per sketches Nos. 1, 2, 3, 4, side

36- As per sketches Nos. 1, 2, 3, 4, end

43- As per sketch No. 5, side

44- As per sketch No. 5, front end

45- As per sketch No. 5, back end

46- As per sketch No. 6, side

47- As per sketch No. 6, end

48- As per sketch No. 7, side

49- As per sketch No. 7, end

50- As per sketch No. 8, side

51- As per sketch No. 8, end

52- As per sketch No. 9, side ^

53- As per sketch No. 9, front end

54- As per sketch No. 9, back end

55- As per sketch No. 10, one half

56- As per sketch No. 11, side

57- As per sketch No. 11, front end

58- As per sketch No. 11, back end

59- As per sketch No. 12, side

60- As per sketch No. 12, end

61- As per sketch No. 13, one half

4R60-9 Forged (ring complete). Rate

Includes getting material, blocking out and forging complete, ready for
scarfing, all sides and ends of mudrings designated by sketches in the follow-
ing classification. (See note, page 255.)

Steam hammer.

Per first mudring :

70-As per sketches Nos. 1, 2, 3, 4, 5

75- As per sketch No. 6

76- As per sketch No. 7

77- As per sketch No. 8

78- As per sketch No. 9

79- As per sketch No. 10

80- As per sketch No. 11

81- As per sketch No. 12 . .

82- As per sketch No. 13

Per mudring after first one :

90-As per sketches Nos. 1, 2, 3, 4, 5

95- As per sketch No. 6

96- As per sketch No. 7

97- As per sketch No. 8

98- As per sketch No. 9

99- As per sketch No. 10 -

100- As per sketch No. 11

101- As per sketch No. 12

102- As per sketch No. 13

BOILER

Firebox Mud Ring

BOILER.

257

Firebox

RING, MUD

4R60-16 Scarfed. Rate

Includes getting sides or ends or halves of mudring after same have been
forged, and scarfing ends, bolting up ring and having same ready for welding
complete. (See note, page 255.)

Forge.

Per first side or end scarfed :

1- As per sketches Nos. 1, 2, 3, 4, side

2- As per sketches Nos. 1, 2, 3, 4, end

9-As per sketch No. 5, side •

10- As per sketch No. 5, front end

11- As per sketch No. 5, back end

12- As per sketch No. 6, side.

13- As per sketch No. 6, end

14- As per sketch No. 7, side

15- As per sketch No. 7, end

16- As per sketch No. 8, side.

17- As per sketch No. 8, end

18- As per sketch No. 9, side

19- As per sketch No. 9, front end

20- As per sketch No. 9, back end

21- As per sketch No. 11, side

22- As per sketch No. 11, front end

23- As per sketch No. 11, back end

24- As per sketch No. 12, side

25- As per sketch No. 12, end *

Per side or end scarfed after first one :

30-As per sketches Nos. 1, '2, 3, 4, side

. 31-As per sketches Nos. 1, 2, 3, 4, end

38- As per sketch No. 5, side

39- As per sketch No. 5, front end

40- As per sketch No. 5, back end

41- As per sketch No. 6, side

42- As per sketch No. 6, end

43- As per sketch No. 7, side

44- As per sketch No. 7, end

45- As per sketch No. 8, side •

46- As per sketch No. 8, end

47- As per sketch No. 9, side

48- As per sketch No. 9, front end

49- As per sketch No. 9, back end

50- As per sketch No. 11, side

51- As per sketch No. 11, front end

52- As pel sketch No. 11, back end

53- As per sketch No. 12, side

54- As per sketch No. 12, end

BOILER

Firebox Mud Ring

258

BLACKSMITH SHOP SCHEDULES.

Firebox

RING, MUD

4R60-16 Scarfed complete. Rate

Includes doing all necessary scarfing on sides and ends of mudring to make
same complete, ready for welding. (See note, page 255.)

Forge.

Per first mudring :

60-As per sketches Nos. 1, 2, 3, 4, 5

65- As per sketch No. 6

66- As per sketch No. 7

67- As per sketch No. 8

68- As per sketch No. 9

69- As per sketch No. 11

70- As per sketch No. 12

Per mudring after first one :

75-As per sketches Nos. 1, 2, 3, 4, 5

80- As per sketch No. 6

81- As per sketch No. 7

82- As per sketch No. 8

83- As per sketch No. 9

84- As per sketch No. 11

85- As per sketch No. 12

4R60-18 Straightened. Rate....

Includes straightening firebox mudring when same has become bent or
twisted. (See note, page 255.)

Forge.

Per first mudring :

1- As per sketches Nos. 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12 :

2- As per sketches Nos. 10, 13

Per mudring after first one :

20- As per sketches Nos. 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12

21- As per sketches Nos. 10, 13

4R60-21 Welded (parts together) (after ends are scarfed). Rate

Includes getting sides and ends or halves of mudring after same have been
scarfed and bolted up, making welds, dressing and finishing mudring to shape
complete. (See note, page 255.)

Forge.

Per first mudring :

1-As per sketches Nos. 1, 2, 3, 4, 5

6- As per sketch No. 6

7- As per sketch No. 7 —

8- As per sketch No. 8

9- As per sketch No. 9 — -

10- As per sketch No. 10 — -

11- As per sketch No. 11

12- As per sketch No. 12

13- As per sketch No. 13

BOILER

Firebox Mud Ring

BOILER.

259

Firebox

RING, MUD

Per mudiing after first one :

20- As per sketches Nos. 1, 2, 3, 4, 5

25- As per sketch No. 6 ^

26- As per sketch No. 7

27- As per sketch No. 8

28- As per sketch No. 9

29- As per sketch No. 10

30- As per sketch No. 11 -

31- As per sketch No. 12

32- As per sketch No. 13

4R60-21 Welded (parts together) (scarfing included). Rate

Includes getting sides and ends or halves of mudring after same have been
forged, doing necessary scarfing, bolting up, welding, dressing and finishing
mudring complete. (See note, page 255).

Forge.

Per first mudring :

40-As per sketches Nos. 1, 2, 3, 4, 5 —

45- As per sketch No. 6

46- As per sketch No. 7

47- As per sketch No. 8

48- As per sketch No. 9

49- As per sketch No. 10

50- As per sketch No. 11

51- As per sketch No. 12

52- As per sketch No. 13 ,

Per mudring after first one :

60-As per sketches Nos. 1, 2, 3, 4, 5. . .

65- As per sketch No. 6

66- As per sketch No. 7

67- As per sketch No. 8

68- As per sketch No. 9

69- As per sketch No. 10

70- As per sketch No. 11

71- As per sketch No. 12

72- As per sketch No. 13

4R60-21 Welded (break). Rate

Includes doing necessary scarfing of mudring, getting V piece after same has
been forged, welding break in mudring, straightening, putting to right length,
dressing and finishing over weld complete. Does not include taking side
heat on V piece.

Forge.

When V piece is welded in on one side or end of mudring.

Per place repaired :

80- As per sketches Nos. 1, 2, 3, 4, side

81- As per sketches Nos. 1, 2, 3, 4, end

• (Continued on page 260.)

BOILER

Firebox Mud Ring

260

BLACKSMITH SHOP SCHEDULES.

Firebox

RING, MUD

(Continued from page 259.)

88- As per sketch No. 5, side

89- As per sketch No. 5, front end

90- As per sketch No. 5, back end

91- As per sketch No. 6, side

92- As per sketch No. 6, end

93- As per sketch No. 7, side '.

94- As per sketch No. 7, end

95- As per sketch No. 8, side

96- As per sketch No. 8, end

97- As per sketch No. 9, side :

98- As per sketch No. 9, front end

99- As per sketch No. 9, back end

100- As per sketch No. 10, side

101- As per sketch No. 10, end

102- As per sketch No. 11, side

103- As per sketch No. 11, front end

104- As per sketch No. 11, back end

105- As per sketch No. 12, side

106- As per sketch No. 12, end

107- As per sketch No. 13, side ‘

108- As per sketch No. 13, end

When V piece is welded in on both sides or ends of mudring :

Per place repaired :

115- As per sketches Nos. 1, 2, 3, 4, side

116- As per sketches Nos. 1, 2, 3, 4, end

123- As per sketch No. 5, side

124- As per sketch No. 5, front end

125- As per sketch No. 5, back end ’

126- As per sketch No. 6, side

127- As per sketch No. 6, end

128- As per sketch No. 7, side

129- As per sketch No. 7, end

130- As per sketch No. 8, side

131- As per sketch No. 8, end

132- As per sketch No. 9, side

133- As per sketch No. 9, front end

134- As per sketch No. 9, back end

135- As per sketch No. 10, side

136- As per sketch No. 10, end

137- As per sketch No. 11, side

138- As per sketch No. 11, front end

139- As per sketch No. 11, back end

140- As per sketch No. 12, side

141- As per sketch No. 12, end

142- As per sketch No. 13, side -

143- As per sketch No. 13, end

BOILER

Firebox Mud Ring

BOILER.

261

Firebox

RING, MUD

Making V piece.

Includes getting material, blocking out and forging V piece for making above
welds long enough for two sides :

Steam hammer :

150- Per first V piece

151 — Per V piece after first one

Forge :

155- Per first V piece

156- Per V piece after first one

Taking side heat on V piece. Includes taking side heat on V
piece for making above welds :

160- Per first side heat

161- Per side heat after first one

4R6Q-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in mudring, dressing and
finishing over weld complete.

Forge.

Per first place repaired :

170- As per sketches Nos. 1, 2, 3, 4, side

171- As per sketches Nos. 1, 2, 3, 4, end

178- As per sketch No. 5, side

179- As per sketch No. 5, front end

180- As per sketch No. 5, back end

181- As per sketch No. 6, side

182- As per sketch No. 6, end

183- As per sketch No. 7, side

184- As per sketch No. 7, end

185- As per sketch No. 8, side

186- As per sketch No. 8, end

187- As per sketch No. 9j side

188- As per sketch No. 9, front end

189- As per sketch No. 9, back end. .

190- As per sketch No. 10, side

191- As per sketch No. 10, end

192- As per sketch No. 11, side

193- As per sketch No. 11, front end

194- As per sketch No. 11, back end.

195- As per sketch No. 12, side

196- As per sketch No. 12, end

.197- As per sketch No. 13, side

198- As per sketch No. 13, end

BOILER

Firebox Mud Ring

262

BLACKSMITH SHOP SCHEDULES.

Firebox

RING, MUD

Per place repaired after first one :

205- As per sketches Nos. 1, 2, 3, 4, side

206- As pel sketches Nos. 1, 2, 3, 4, end

213- As per sketch No. 5, side

214- As per sketch No. 5, front end

215- As per sketch No. 5, back end

2 16- As per sketch No. 6, side

217- As per sketch No. 6, .eind

218- As per sketch No. 7, side

219- As per sketch No. 7, end

220- As pel sketch No. 8, side

221- As per sketch No. 8, end

222- As per sketch No. 9, side

223- As per sketch No. 9, front end

224- As per sketch No. 9, back end

225- As per sketch No. 10, side

226- As per sketch No. 10, end

227- As per sketch No. 11, side

228- As per sketch No. 11, front end

229- As per sketch No. 11, back end

230- As per sketch No. 12, side

231- As per sketch No. 12, end

232- As per sketch No. 13, side

233- As per sketch No. 13, end

4R60-21 Welded (corners repaired). Rate

Includes repairing corners of mudring for distance not exceeding 12" either
side of corner, by welding piece On corner for new stock, dressing and finish-
ing corner complete.

Forge.

Per first corner :

240-As per sketches Nos. 1, 2, 3, 4, 5

' 245-As per sketch No. 6

246- As per sketch No. 7

247- As per sketch No. 8

248- As per sketch No. 9

249- As per sketch No. 10

250- As per sketch No. 11

251- As per. sketch No. 12

252- As per sketch No. 13

BOILER

Firebox Mud Ring

BOILER.

263

Firebox

RING, MUD

' Per corner after first one :

260- As per sketches Nos. 1, 2, 3, 4, 5

265- As per sketch No. 6

266- As pet sketch No. 7 —

267- As per sketch No. 8 -

268- As per sketch No. 9 -

269- As per sketch No. 10

270- As per sketch No. 11 -

271- As per sketch No. 12

272- As per sketch No. 13

Per additional 1" after first 12" ;

280- As per sketches Nos. 1, 2, 3, 4, 5

285- As per sketch No. 6

286- As per sketch No. 7 *

287- As per sketch No. 8 —

288- As per sketch No. 9

289- As per sketch No. 10

290- As per sketch No. 11

291- As per sketch No. 12

292- As per sketch No. 13

4R60-21 Welded (lugs). Rate

Includes getting material, forging out lug, doing necessary scarfing, welding
lug on mudring, dressing and finishing complete.

Forge.

Per first lug :

300- As per sketch No. 2

301- As per sketch No. 8

302- As per sketch No. 9

Per lug after first one :

306- As per sketch No. 2

307- As per sketch No. 8

308- As per sketch No. 9

4R60-21 Welded (flange or lug repaired). Rate

Includes welding necessary material on corner of mudring lug or flange,
dressing and finishing corner to shape complete, when corner or lug is broken
off not over 5" in length.

Forge.

Per first place repaired :

315-As per sketches Nos. 1, 2, 3, 4, 5, 9, 10, 12

Per place repaired after first one :

330-As per sketches Nos. 1, 2, 3, 4, 5, 9, 10, 12

BOILER

Firebox Mud Ring

264

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY

F/ re box BacF Heaof Sheet or Throat
Sheet Stay Brace

S) ®

Firebox BacK Head Sheet or Throat
Sheet Stay Brace

Firebox BhcKhead Sheet Stay Brace

^ J

F/rebox BacFhead Sheet Stay Brace

5

Firebox BacK head Sheet Stay Brace

6

Firebox BacK head Sheet Stay Brace

Firebox Backhead Sheet Stay Brace

BOILER.

265

Firebox

SHEET, BEACKHAD— BRACE, STAY

Firebox BocKhead Sheet Stay Brace

Firebox BacKhead Sheet Stay Brace

Firebox BocKheocf Sheet
Stay Brace

¥

to

4R70-2 Bent (ends) (at bulldozer). Rate

Includes bending iron for tee or jaw end of backhead stay brace at bull-
dozer after iron has been cut and delivered.

Per first end ;

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3, per half of jaw

4- As per sketch No. 4, per half of jaw *.

5- As per sketch No. 7

6- As per sketch No. 8

7- As per sketch No. 9

8- As per sketch No. 10

Per end after first one :

12- As per sketch No.l

13- As per sketch No. 2

14- As per sketch No. 3, per half of jaw :

15- As per sketch No. 4, per half of jaw

16- As per sketch No. 7 '

17- As per sketch No. 8

18- As per sketch No. 9

19- As per sketch No. 10

4R70-4 Cut — Iron (for ends). Rate

Includes cutting iron for end of backhead stay brace at power shears.
Power shears :

1-Per piece cut, all sketches

BOILER

Firebox Backhead Sheet Stay Brace

266

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY

4R70-4 Cut — Iron (for body). Rate

Includes cutting iron for body of backhead stay brace.

Power shears :

15-Per piece cut, all sketches . . /

4R70-9 Forged (end). Rate

Includes getting material, blocking out and forging end of backhead stay
brace complete, ready for dressing.

Steam hammer.

Per first end :

1- As per sketch No.

2- As per sketch No.

3- As per sketch No.

Per end after first one :

7- As per sketch No.

8- As per sketch No.

9- As per sketch No.

Forge.

Per first end :

15- As per sketch No.

16- As per sketch No.

17- As per sketch No.

18- As per sketch No.

19- As per sketch No.

20- As per sketch No.

21- As per sketch No.

22- As per sketch No.

23- As per sketch No.

24- As per sketch No.

25- As per sketch No.

26- As per sketch No.

27- As per sketch No.

28- As per sketch No.

29- As per sketch No.

Per end after first one :

35- As per sketch No.

36- As per sketch No.

37- As per sketch No.

38- As per sketch iSlo.

39- As per sketch No.

40- As per sketch No.

41- As per sketch No.

42- As per sketch No.

43- As per sketch No.

44- As per sketch No.

45- As per sketch No.

1 .

2 .

10

1 .

2.

10

1, tee end

2, tee end

2, flat end

3, jaw end

4, jaw end

5, jaw end

5, flat end

6, flat round end.

6, flat square end

7, jaw end

7, flat end

8, jaw end

9, jaw end

9, flat end

10, tee end

1 ,

2 ,

2 ,

3,

4,

4,

5,

5,

6 ,
6 ,
7,

tee end

tee end

flat end

jaw end

jaw end

flat end

jaw end

flat end

flat rounded end
flat square end . .
jaw end

(Continued on page 267.)

BOILER

Firebox Backhead Sheet Stay Brace

BOILER.

267

Firebox

SHEET, BACKHEAD— BRACE, STAY

(Continued from page 266.)

46- As per sketch No. 7, flat end

47- As per sketch No.< 8, jaw end

48- As per sketch No. 9, jaw end

49- As per sketch No. 9, flat end

50- As per sketch No. 10, tee end

4R70-9 Forged (end) (at machine). Rate

Includes changing dies in machine, forging end of backhead stay brace after
iron has been cut, bent and delivered to machine.

Machine.

Per first end :

60-As per sketches Nos. 1, 2, 10, tee end

62-As per sketches Nos. 3, 4, 5, 7, 8, 9, jaw end

Per end after first one :

75-As per sketches Nos. 1, 2, 10, tee end

77-As per sketches Nos. 3, 4, 5, 7, 8, 9, jaw end.

4R70-12 Lengthened or shortened. Rate

Includes lengthening or shortening backhead stay brace by drawing out or
upsetting same.

Forge.

1-Per first brace, all sketches

15-Per brace after first one, all sketches

4R70-13 Made. Rate

Includes getting all material, blocking out and forging ends, forming jaw
complete of backhead stay brace, welding ends on body, dressing and finish-
ing brace complete.

Forge.

Per first brace :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

8- As per sketch No. 8

9- As per sketch No. 9

10-As per sketch No. 10

BOILER

Firebox Backhead Sheet Stay Brace

268

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY

Per brace after first one :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3 i

18- As per sketch No. 4 :

19- As per sketch No. 5

20- As per sketch No. 6

21- As per sketch No. 7 :

22- As per sketch No. 8

23- As per sketch No. 9

24- As per sketch No. 10

4R70-18 Straightened. Rate

Includes straightening old back head stay brace when same has become bent
or twisted.

Forge :

1-Per first brace, all sketches

15-Per brace after first one, all sketches

4R70-21 Welded (parts together). Rate

Includes getting backhead stay brace ends and body after same have been
forged, doing necessary scarfing, welding ends on body, dressing and finish-
ing brace to shape complete.

Forge :

1-Per first weld in brace, all sketches

15-Per weld in brace after first one, all sketches

4R70-21 Welded (new end). Rate.

Includes getting new end after same has been forged, welding same on body
of old backhead stay brace, dressing and finishing end to shape complete.

Forge.

Per first end :

30- As per sketch No. 1, tee end

31- As per sketch No. 1, square end

32- As per sketch No. 2, flat end

33- As per sketch No. 3, jaw end

34- As per sketch No. 4, jaw end

35- As per sketch No. 4, flat end

36- As per sketch No. 5, jaw end

37- As per sketch No. 5, flat end. —

38- As per sketch No. 6, flat rounded end —

39- As per sketch No. 6, flat square end — .

40- As per sketch No. 7, jaw end

41- As per sketch No. 7, flat end

42- As per sketch No. 8, jaw end

43- As per sketch No. 9, jaw end

44- As per sketch No. 10, tee end

45- As per sketch No. 10, square end

BOILER

Firebox Backhead Sheet Stay Brace

BOILER.

269

Firebox

SHEET, BACKHEAD— BRACE, STAY

Per end after first one :

50- As per sketch No. 1, tee end

51- As per sketch No. 1, square end

52- As per sketch No. 2, flat end

53- As per sketch No. 3, jaw end

54- As per sketch No. 4, jaw end

55- As per sketch No. 5, jaw end

56- As per sketch No. 5, flat end

57- As per sketch No. 6, flat rounded end

58- As per sketch No. 6, flat square end. .

59- As per sketch No. 7, jaw end

60- As per sketch No. 7, flat end

61- As per sketch No. 8, jaw end

62- As per sketch No. 9, jaw end,

63- As per sketch No. 10, tee end

64- As per sketch No. 10, square end

4R70-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in backhead stay brace, dress-
ing and finishing over weld complete.

Forge.

Per first hole :

70- As per sketch No.

71- As per sketch No.

72- As per sketch No.

73- As per sketch No.

74- As per sketch No.

75- As per sketch No.

76- As per sketch No.

77- As per sketch No.

78- As per sketch No.

79- As per sketch No.

80- As per sketch No.

81- As per sketch No.

Per hole after first oqe :

85- As per sketch No.

86- As per sketch No.

87- As per sketch No.

88- As per sketch No.

89- As per sketch No.

90- As per sketch No.

91- As per sketch No.

92- As per sketch No.

93- As per sketch No.

94- As per sketch No.

95- As per sketch No.

96- As per sketch No.

97- As per sketch No.

1, tee end

1, square end

2, tee end

2, flat end

4, flat end

5, flat end

6, flat rounded end

6, flat square end . .

7, fiat end

9, flat end

10, tee end

10, square end

1, tee end

1, square end

2, tee end

2, flat end

4, flat end . .

5, flat end

6, flat rounded end

6, flat square end . .

7, flat end

8, flat end

9, flat end

10, tee end

10, square end ....

BOILER

Firebox Backhead Sheet Stay Brace

270

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY

4R70-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in backhead stay brace,
dressing and finishing over weld complete.

Forge :

105-Per first place repaired, all sketches

120-Per place repaired after first one, all sketches

4R70-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in backhead stay brace,
dressing and finishing over weld complete.

Forge :

135-Per first place repaired, all sketches

150-Per place repaired after first one, all sketches

BOILER

Firebox Backhead Sheet Stay Brace

BOILER.

271

Firebox

SHEET, BACKHEAD— BRACE, STAY— END

4R74-6 Dressed. Rate

Includes dressing 'and finishing complete, backhead stay brace end.

Forge :

1- Per first end

2- Per end after first one

4R74-9 Forged. Rate

Includes getting material, blocking out, forging backhead stay brace end
complete, ready for dressing.

Steam hammer :

1- Per first end

2- Per end after first one —

Forge :

3- Per first end ^ -

4- Per end after first one

4R74-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing back-
head stay brace end complete.

Forge :

8- Per first end

9- Per end after first one

4R74-18 Straightened. Rate

Includes straightening old backhead stay brace end when same has become
bent or twisted.

Forge :

1- Per first end

2- Per end after first one

4R74-21 Welded (crack). Rate....'

Includes making dutchman, welding same in crack in backhead stay brace
end, dressing and finishing over weld complete.

Forge :

1- Per fiist place repaired

2- Per place repaired after first one

BOILER

Firebox Backhead Sheet Stay Brace End

272

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY— END

4R74-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in backhead stay brace end,
dressing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one t . .

BOILER

Firebox Backhead Sheet Stay Brace End

BOILER.

273

4R78-6 Dressed. Rate

Includes dressing ends and finishing complete, backhead stay brace lug after
lug has been forged.

Forge.

Per first lug :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

Per lug after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

16- As per sketch No. 7

BOILER

Firebox Backhead Sheet Stay Brace Lug

274

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY— LUG

4R78-9 Forged. Rate

Includes getting material, blocking out and forging backhead stay brace lug
complete, ready for dressing.

Steam hammer.

Per first lug :

1- As per sketch No. 1 . .

2- As per sketch No. 2

3- As per sketch -No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

Per lug after first one :

10- As per sketch No. 1

11- As per sketch No. 2 .

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5.

15- As per sketch No. 6

16- As per sketch No. 7

Forge.

Per first lug :

19- As per sketch No. 1

20- As per sketch No. 2

21- As per sketch No. 3

22- As per sketch No. 4 ,

23- As per sketch No. 5 -

24- As per sketch No. 6 —

25- As per sketch No. 7

Per lug after first one :

28- As per sketch No.l

29- As per sketch No. 2

30- As per sketch No. 3

31- As per sketch No. 4

32- As per sketch No. 5

33- As per sketch No. 6

34- As per sketch No. 7

BOILER

Firebox Backhead Sheet Stay Brace Lug

BOILER.

275

Firebox

SHEET, BACKHEAD— BRACE, STAY— LUG

4R78-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, backhead stay brace lug.

Forge.

Per first lug :

40- As per sketch No. 1

41- As per sketch No. 2

42- As per sketch No. 3

43- As per sketch No. 4

44- As per sketch No. 5

45- As per sketch No. 6

46- As per sketch No. 7

47- As per sketch No. 8

Per lug after first one : •

50- As per sketch No.l

51- As per sketch No. 2

52- As per sketch No. 3

53- As per sketch No. 4

54- As per sketch No. 5 '.

55- As per sketch No. 6

56- As per sketch No. 7

57- As per sketch No. 8

4R78-18 Straightened. Rate

Includes straightening old backhead stay brace lug when same has become
bent.

Forge :

1-Per first lug, all sketches

12-Per lug after first one, all sketches

4R78-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in backhead stay brace
lug, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 ,

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

8- As per sketch No. 8

BOILER

Firebox Backhead Sheet Stay Brace Lug

276

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, BACKHEAD— BRACE, STAY— LUG

Per lug after first one :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3 . ..

15- As per sketch No. 4

16- As per sketch No. 5

17- As per sketch No. 6

18- As per sketch No. 7

19- As per sketch No. 8

4R78-21 Welded (holes plugged). Rate..

Includes making plug, welding same in hole in backhead stay brace lug,
dressing and finishing over weld complete.

Forge.

25-Per first hole, all sketches

36-Per hole after first one, all sketches

BOILER

Firebox Backhead Sheet Stay Brace Lug

BOILER.

277

Firebox

SHEET, CROWN— BOLT, RADIAL STAY

Firebox Crown Sheet Radial Sfaybolfs

I p 3

Firebox Crown Sheet Roo//a/ Stay Bo/t

4R86-4 Cut — Iron. Rate

Includes cutting iron for crown sheet radial stay bolt at power shears.
Power shears :

1-Per piece cut

4R86-13 Made (at forge). Rate

Includes getting material, forging end of crown sheet radial stay bolt, welding
same on bolt rod, dressing and finishing bolt to shape complete.

Forge.

Per first end :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

BOILER

Firebox — Crown Sheet Radial Stay Bolt

278

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, CROWN— BOLT, RADIAL STAY

Per end after first one :

8- As per sketch No.l

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

4R86-13 Made (at machine). Rate

Includes changing dies in forging machine, forging crown sheet radial stay-
bolt complete, after iron has been delivered at machine.

Machine.

Per first end :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

Per end after first one :

24- As per sketch No.l

25- As per sketch No. 2

26- As per sketch No. 3

, 27-As per sketch No. 4

4R86-21 Welded (to adjust length). Rate

Includes welding in necessary stock on crown sheet radial stay bolt to adjust
bolt to length complete.

Forge :

1-Per first bolt, all sketches -

8-Per bolt after first one, all sketches

BOILER

Firebox — Crown Sheet Radial Stay Bolt

BOILER.

279

Firebox

SHEET, CROWN— BRACE, STAY— LUG

4R90-6 Dressed. Rate

Includes dressing ends and finishing complete, crown sheet stay brace lug
after lug has been forged.

Forge.

Per first lug :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5 -

Per lug after first one :

8- As per sketch No. 1

9- As per sketch No. 2 ,

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

4R90-9 Forged. Rate

Includes getting material for crown sheet stay brace lug, blocking out and
forging complete, ready for dressing.

Steam hammer.

Per first lug :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

BOILER

Firebox — Crown Sheet Stay Brace Lug

280

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, CROWN— BRACE, STAY— LUG

Per lug after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

Forge.

Per first lug :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

19- As per sketch No. 5../

Per lug after first one :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4

29- As per sketch No. 5

4R90-9 Forged and dressed. Rate

Includes getting material for crown sheet stay brace lug, blocking out,
forging, dressing and finishing complete.

Forge.

Per first lug :

35- As per sketch No. 1

36- As per sketch No. 2

37- As per sketch No. 3

38- As per sketch No. 4 •

39- As per sketch No. 5 *

40- As per sketch No. 6

Per lug after first one :

45- As per sketch No. 1

46- As per sketch No. 2

47- As per sketch No. 3

48- As per sketch No. 4

49- As per sketch No. 5 -

50- As per sketch No. 6

4R90-18 Straightened. Rate

Includes straightening old crown sheet stay brace lug when same has become
bent.

Forge :

1-Per first lug, all sketches

10-Per lug after first one, all sketches

BOILER

Firebox — Crown Sheet Stay Brace Lug

BOILER.

281

Firebox

SHEET, CROWN— BRACE, STAY— LUG

4R90-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in crown sheet stay brace
lug, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l..

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per place repaired after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

4R90-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in crown sheet stay brace lug,
dressing and finishing over weld complete.

Forge.

20-Per first hole, all sketches

30-Per hole after first one, all sketches

BOILER

Firebox — Crown Sheet Stay Brace Lug

282

BLACKSMITH SHOP SCHEDULES.

Firebox

SHEET, CROWN— TEE IRON

F/reDox Crown Sheet Tee tron

4R100-2 Bent. Rate..

Includes bending crown sheet tee iron to shape to fit crown sheet.

Steam hammer :

1- Per first end

2- Per end after first one :

Forge :

3- Per first end

4- Per end after first one

4R100-4 Cut — Ends. Rate.....

Includes cutting off ends of crown sheet tee iron.

Steam hammer :

1- Per first end

2- Per end after first one

Forge :

3- Per first end ;

4- Per end after first one

4R100-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in crown sheet tee iron, dressing
and finishing over weld complete.

Forge :

1- Per first hole plugged

2- Per hole plugged after first one

BOILER

Firebox Crown Sheet Tee Iron

BOILER.

283

Firebox

SHEET, THROAT— BRACE, STAY— END

4R114 Note.

For operations on throat sheet stay brace end, see Schedule, No. 4R10,
under dome brace end.

BOILER

Firebox — Sheet, Throat — Stay Brace End

284

BLACKSMITH SHOP SCHEDULES.

For operations on throat sheet stay brace lug, see Schedule No. 4R78, under
backhead stay brace lug.

BOILER

Firebox Throat Sheet Stay Brace Lug

BOILER.

285

Firebox

STAY, LONGITUDINAL

Transverse or Longitudinal Screw Stay Roas

4R126-4 Cut — Iron. Rate..

Includes cutting iron for heads of longitudinal stay at power shears.

Power shears :

1-Per piece cut

4R126-6 Dressed (body of rod). Rate

Includes forging down, rounding up and dressing complete, firebox longi-
tudinal stay rod after ends have been made.

Steam hammer :

1- Per first rod

2- Per rod after first one

Forge :

3- Per first rod

4- Per rod after first one

4R126-13 Made (at forge). Rate

Includes getting material, forging end of logitudinal stay, welding same on
stay rod, dressing and finishing stay to shape complete.

Forge.

Per first stay :

1-As per sketch No. 1

Per stay after first one :

5- As per sketch No. 1

BOILER

Firebox Longitudinal Stay

286

BLACKSMITH SHOP SCHEDULES.

Firebox

STAY, LONGITUDINAL

4R126-13 Made (at machine). Rate

Includes changing dies in forging machine, forging heads for longitudinal
stay complete, after iron has been delivered to machine.

Machine.

Per first head :

8-As per sketch No. 1

Per head after first one :

12-As per sketch No. 1

4R126-21 Welded (to adjust length). Rate

Includes welding in necessary stock on longitudinal stay to adjust stay to
length complete.

Forge.

Per first weld in stay :

1-As per sketch No. 1 . . ,

Per weld in stay after first one :

5- As per sketch No. 1

BOILER

Firebox Longitudinal Stay

BOILER.

287

Mud Drum
RING

Mua/ Drum R/nq

4R160-6 Dressed and welded/ Rate

Includes dressing mud drum ring after same has been forged, or getting bar
iron, doing necessary scarfing, making weld and finishing ring complete.

Forge.

Per first ring :

1-As per sketch No.l

Per ring after first one :

5- As per sketch No. 1

4R150-9 Forged. Rate

Includes getting material, blocking out and forging iron complete for mud
drum ring.

Steam hammer.

Per first ring :

1-As per sketch No. 1

Per ring after first one :

5-As per sketch No. 1

Forge.

Per first ring :

8-As per sketch No.l

Per ring after first one :

12-As per sketch No. 1

4R150-9 Forged and dressed. Rate

Includes getting material for mud drum ring, blocking out, forging, welding
and dressing complete.

Forge.

Per first ring :

16-As per slcetch No. 1

Per ring after first one :

18-As per sketch No.l

BOILER
Mud Drum Ring

288

BLACKSMITH SHOP SCHEDULES.

Mud Drum
RING

4R160-13 Made complete (from solid slab). Rate

Includes getting material, blocking out and forging slab, cutting out hole,
and trimming mud drum ring to shape complete.

Steam hammer.

Per first ring :

1-As per sketch No. 1

Per ring after first one :

5-As per sketch No.l

4R150-18 Straightened. Rate

Includes straightening old mud drum ring when same has become bent or
twisted.

Forge.

Per first ring :

1-As per sketch No.l

Per ring after first one :

5- As per sketch No.l

4R160-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in mud drum ring, dressing
and finishing over weld complete.

Forge.

Per first place repaired :

1-As per sketch No. 1

Per place repaired after first one :

5-As per sketch No.l

4R160-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in mud drum ring, dress-
ing and finishing over weld complete.

Forge.

Per first place repaired :

8-As per sketch No. 1 —

Per place repaired after first one ;

12-As per sketch No. 1

BOILER

Mud Drum Ring

BOILER.

289

Mud Drum
RING

4R160-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in mud drum ring, dressing and
finishing over weld complete.

Forge.

Per first hole :

16-As per sketch No. 1

Per hole after first one :

20-As per sketch No. 1

BOILER
Mud Drum Ring

290

BLACKSMITH SHOP SCHEDULES.

Sheet, Front Flue
BRACE LUG

4R200 Note.

For operations on front flue sheet brace lug, see Schedule No. 4R78, under
backhead stay brace lug.

BOILER

Sheet, Front Flue — Brace Lug

BOILER.

291

Sheet, Front Flue
TEE IRON

Front F/ue Sheet Tee Iron

4R210-18 Straightened. Rate

Includes straightening old front flue sheet tee iron when same has become
bent.

Forge :

1- Per first tee iron

2- Per tee iron after first one. .

4R210-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in front flue sheet tee iron,
dressing and finislung over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

BOILER

Sheet, Front Flue — Tee Iron

292

BLACKSMITH SHOP SCHEDULES.

Smoke Box

DAMPER QUADRANT

SmoMe Box Damper Quac/ranfs

4R240-2 Bend changed. Rate

Includes changing bend in smoke box damper quadrant.

Forge.

Per first bend changed :

• 1-As per sketch No.l

2-As per sketch No. 2

Per bend changed after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4R240-12 Lengthened or shortened. Rate

Includes lengthening or shortening smoke box damper quadrant by drawing
out or upsetting same.

Forge.

Per first leg lengthened or shortened :

1- As per sketch No. 1

2- As per sketch No. 2

Per leg lengthened or shortened after first one :

5- As per sketch No. 1 . .

6- As per sketch No. 2. .

BOILER

Smoke Box Damper Quadrant

BOILER.

293

Smoke Box

DAMPER QUADRANT

4R240-13 Made. Rate

Includes getting material for smoke box damper quadrant, bending, dressing
and finis Wng complete.

Forge.

Per first quadrant :

1- As per sketch No. 1

2- As per sketch No. 2

Per quadrant after first one :

5- As per sketch No. 1

6- As per sketch No. 2 !

4R240-18 Straightened. Rate

Includes straightening old smoke box damper quadrant when same has be-
come bent. «

Forge.

Per first quadrant :

1- As per sketch No. 1

2- As per sketch No.2

Per quadrant after first one :

5-As per sketch No. 1

fi-As per sketch No. 2

4R240-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in smoke box damper
quadrant, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

BOILER

Smoke Box Damper Quadrant

294

BLACKSMITH SHOP SCHEDULES.

Smoke Box

DAMPER QUADRANT

4R240-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in smoke box damper
quadrant, dressing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 1

11- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4R240-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in smoke box damper quadrant,
dressing and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2

Per hole after first one :

25- As per sketch No. 1

26- As per sketch No. 2

BOILER

Smoke Box Damper Quadrant

BOILER.

295

Smoke Box

NETTING DOOR FRAME

SmoKe Box Net-
ting Door Frame

4R260-13 Made. Rate

Includes getting material for smoke box netting door frame, forging, bend-
ing, welding, dressing and finishing complete.

Forge :

1- Per first frame

2- Per frame after first one

4R260-18 Straightened. Rate

Includes straightening old smoke box netting door frame when same has be-
come bent or twisted.

Forge :

1- Per first frame

2- Per frame after first one

4R260-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in smoke box netting door
frame, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one . . !

BOILER

Smoke Box Netting Door Frame

296

BLACKSMITH SHOP SCHEDULES,

Smoke Box

PIPE, PETTICOAT— BRACE

Smoke Box Petticoat Pipe Braces

5 6 7 6

4R260-2 Bend changed. Rate.

Includes changing bend in petticoat pipe brace.

Forge :

1-Per first bend changed, all sketches

12-Per bend changed after first one, all sketches

BOILER

Smoke Box Petticoat Pipe Brace

BOILER.

297

Smoke Box

PIPE, PETTICOAT— BRACE

4R260-4 Cut— Iron. Rate

Includes cutting at power shears iron for petticoat pipe brace.

Power shears :

1-Per piece cut

4R260-12 Lengthened or shortened. Rate

Includes lengthening or shortening petticoat pipe brace by drawing out or
upsetting same.

Forge :

1-Per first brace, all sketches

12-Per brace after first one, all sketches

4R260-13 Made. Rate

Includes getting material for petticoat pipe brace, forging, bending, dressing
and finishing complete.

Forge.

Per first brace :

1- As per sketch No. 1

2- As per sketch No. 2 ...

3- As per sketch No. 3 . . .

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6. ;

7- As per sketch No. 7

8- As per sketch No. 8 . .

Per brace after first one :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

15- As per sketch No. 4

16- As per sketch No. 5

17- As per sketch No. 6

18- As per sketch No. 7

19- As per sketch No. 8

4R260-18 Straightened. Rate

Includes straightening old petticoat pipe brace when same has become bent
or twisted.

Forge :

1-Per first brace, all sketches

12-Per brace after first one, all sketches

BOILER

Smoke Box Petticoat Pipe Brace

298

BLACKSMITH SHOP SCHEDULES.

Smoke Box

PIPE, PETTICOAT— BRACE

4R260-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in petticoat pipe brace,,
dressing and finishing over weld complete.

Forge :

1-Per first place repaired, all sketches

12-Per place repaired after first one, all sketches

4R260-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in petticoat pipe brace,
dressing and finishing over weld complete.

Forge :

25-Per first place repaired, all sketches

36-Per place repaired after first one, all sketches

4R260-2 Welded (holes plugged). Rate

Includes making plug, welding same in hole in petticoat pipe brace, dressing
and finishing over weld complete.

Forge :

50-Per first hole plugged, all sketches

60-Per hole plugged after first one, all sketches

BOILER

Smoke Box Petticoat Pipe Brace

BOILER.

299

Smoke Box

RING, FRONT

SmoKe Box
Front Ring

4R270-6 Dressed and welded. Rate

Includes rounding up smoke box front ring, welding and finishing ring com-
plete, after same has been scarfed and rolled.

Forge.

Per first ring :

1- Ring made from 2" square iron or less

2- Ring made from 2 \" or 2^" square iron

3- Ring made from 2f" or 2|" square iron

4- Ring made from 2f" or 3" square iron

Per ring after first one :

8- Ring made from 2" square iron

9- Ring made from 2 \" or 2 \'' square iron

10- Ring made from 2f" or 2^" square iron

11- Ring made from 2|" or 3" square iron

BOILER

Smoke Box Front Ring

300

BLACKSMITH SHOP SCHEDULES.

Smoke Box

RING, FRONT

4R270-9 Forged. Rate

Includes getting material for smoke box front ring, blocking out. and
forging complete, ready for rolling.

Steam hammer.

Per first ring :

. 1-Ring made from, 2" square iron or less

2- Ring made fropa 2\" or 2|" square iron

3- Ring made from 2f" or 2|" square iron 4

4- Ring made from 2f" or 3" square iron

. Per ring after first one ;

8- Ring made from 2" square iron

9- Ring made from 2\" or 2\" square iron

10- Ring made from 2f" or 2h" square iron

11- Ring made from 2f" or 3" square iron

4R270-12 Lengthened (by welding ) (before made complete). Rate

Includes taking forging for smoke box front ring when^same is not long enough
to make ring, and welding out to necessary length. Does not include scarf-
ing.

Forge.

Per first ring :

1- Ring made from 2" square iron or less

2- Ring made from 2\" or 2\" square iron

3- Ring made from 2f" or 2^" square iron

4- Ring made from 2|" or 3" square iron

Per ring after first one :

8- Ring made from 2" square iron

9- Ring made from 2\" or 2\" square iron

10- Ring made from 2|" or 2^" square iron

11- Ring made from 2f" or 3" square iron

4R270-13 Made complete (from bar iron or forged iron). Rate

Includes getting bar iron or iron which has been forged for smoke box front
ring, scarfing, bending, rounding up, welding and finishing ring complete.

Forge.

Per first ring :

1- Ring made from 2" square iron or less

2- Ring made from 2\" or 2\" square iron

3- Ring made from 2|" or 2\" square iron

4- Ring made from 2f" or 3" square iron ^

5- Ring made from over 3" square iron

BOILER

Smoke Box Front Ring

BOILER.

301

Smoke Box

RING, FRONT

Per ring after first one :

8- Ring made from 2" square iron

9- Ring made from 2|" or 2 \" square iron

10- Ring made from 2|" or square iron

11- Ring made from 2|" or 3" square iron

12- Ring made froni over 3" square iron

4R270-16 Scarfed. Rate

Includes scarfing smoke box front ring complete, ready for welding, after
ring has been forged.

Forge.

Per first ring :

1- Ring made from 2" square iron or less

2- Ring made from 2|".or 2 \” square iron

3- Ring made from 2|" or 2 \" square iron

4- Ring made from 2|" or 3" square iron

Per ring after first one :

8- Ring made from 2" square iron

9- Ring made from 2|" or 2 \" square iron

10- Ring made from 2|" or 2^" square iron

11- Ring made from 2f" or 3" square iron ^

4R270-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in smoke box front ring,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4R270-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in smoke box front ring,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4R270-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in smoke box front ring, dressing
and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

BOILER

Smoke Box Front Ring

302

BLACKSMITH SHOP SCHEDULES.

Smoke Box

RING, INTERMEDIATE

SrnoAe Box
/nfermed/afe R/ng

4R276-6 Dressed and welded. Rate

Includes getting smoke box intermediate ring after same has been forged, or
getting necessary bar iron, doing necessary scarfing, rounding up ring, weld-
ing and finishing complete.

Forge :

1- Per first ring

2- Per ring after first one

4R276-9 Forged. Rate

Includes getting material, blocking out and forging iron box for smoke inter-
mediate ring, complete.

Steam hammer :

1- Per first ring

2- Per ring after first one

BOILER

Smoke Box Intermediate Ring

BOILER.

303

Smoke Box

RING, INTERMEDIATE

4R276-12 Lengthened (by welding) (before made complete.) Rate

Includes taking forging for smoke box intermediate ring when same is not
long enough to make ring, and welding out to necessary length. Does not
include scarfing.

Forge :

1- Per first ring

2- Per ring after first one

4R276-16 Scarfed. Rate

Includes scarfing smoke box intermediate ring complete, ready for welding.
Forge :

1- Per first ring

2- Per ring after first one

4R276-18 Straightened. Rate

Includes straightening old smoke box intermediate ring when same has
become bent or twisted.

Forge :

1- Per first ring

2- Per ring after first one

4R276-21 Welded (after scarfed and rolled). Rate

Includes getting smoke box intermediate ring after same has been scarfed
and rolled, rounding up, welding and finishing ring complete.

Forge :

1- Per first ring

2- Per ring after first one

4R276-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in smoke box intermediate
ring, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4R276-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in smoke box intermediate
ring, dressing and finishing over weld complete.

Forge :

10- Per first place repaired

1 1- Per place repaired after first one

BOILER

Smoke Box Intermediate Ring

304

BLACKSMITH SHOP SCHEDULES,

Smoke Box

RING, INTERMEDIATE

4R276-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in smoke box intermediate ring,
dressing and finishing over weld complete.

Forge :

15- Per first hole

16- Per hole after first one 1

BOILER

Smoke Box Intermediate Ring

BOILER.

305

Smoke Box

SUPERHEATER SUPPORT

Superheater Supports

4R290-2 Bend changed. Rate

Includes changing bend in smoke box superheater support.

Forge. .

Per bend first changed :

1- As per sketch No.l

2- As per sketch No. 2, support less than 6" long

3- As per sketch No. 2, support 6" to 12" long incl

4- As per sketch No. 2, support over 12" long

5- As per sketch No. 3, support less than 6" long

6- As per sketch No. 3, support 6" to 12" long incl

7- As per sketch No. 3, support over 12" long

Per bend changed after first one :

10- As per sketch No. 1

11- As per sketch No. 2, support less than 6" long

12- As per sketch No. 2, support 6" to 12" long incl

13- As per sketch No. 2, support over 12" long

14- As per sketch No. 3, support less than 6" long

15- As per sketch No. 3, support 6" to 12" long incl

16- As per sketch No. 3, support over 12" long

4R290-4 Cut — Iron. Rate

Includes cutting iron at power shears for smoke box superheater support.
Power shears :

1-Per piece cut

4R290-12 Lengthened or shortened. Rate

Includes lengthening or shortening smoke box superheater support by draw-
ing out or upsetting same.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2, support less than, 6" long

3- As per sketch No. 2, support 6" to 12" long incl

4r-As per sketch No. 2, support over 12" long

5- As per sketch No. 3, support less than 6" long

6- As per sketch No. 3, support 6" to 12" long incl

7- As per sketch No. 3, support over 12" long

BOILER

Smoke Box Superheater Support

306

BLACKSMITH SHOP SCHEDULES.

Smoke Box

SUPERHEATER SUPPORT

Per support after first one :

10- As per sketch No. 1

11- As per sketch No. 2, support less than 6" long

12- As per sketch No. 2, support 6" to 12" long incl

13- As per sketch No. 2, support over 12" long

14- As per sketch No. 3, support less than 6" long

15- As per sketch No. 3, support 6" to 12" long incl

16- As per sketch No. 3, support over 12" long

4R290-13 Made. Rate

Includes getting material for smoke box superheater support, blocking out,
forging, bending, dressing and finishing complete.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2, support less than 6" long

3- As per sketch No. 2, support 6" to 12" long incl

4- As per sketch No. 2, support over 12" long

5- As per sketch No. 3, support less than 6" long.,

6- As per sketch No. 3, support 6" to 12" long incb

7- As per sketch No. 3, support over 12" long

Per support after first one :

10- As per sketch No. 1

11- As per sketch No. 2, support less than 6" long

12- As per sketch No. 2, support 6" to 12" long incl

13- As per sketch No. 2, support over 12" long

14- As per sketch No. 3, support less than 6" long. . !

15- As per sketch No. 3, support 6" to 12" long incl

16- As per sketch No. 3, support over 12" long

4R290-18 Straightened. Rate

Includes straightening old smoke box superheater support when same has
become bent or twisted.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per support after first one :

5- As per sketch No. 1

6- As per sketch No. 2

7- As per sketch No. 3

BOILER

Smoke Box Superheater Support

BOILER.

307

Smoke Box

SUPERHEATER SUPPORT

4R290-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in smoke box superheater
support, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2, support less than 6" long .

3- As per sketch No. 2, support 6" to 12" long incl

4- As per sketch No. 2, support over 12" long

5- As per sketch No. 3, support less than 6" long

6- As per sketch No. 3, support 6" to 12" long incl

7- As per sketch No. 3, support over 12" long

Per place repaired after first one :

10- As per sketch No.l

11- As per sketch No. 2, support less than 6" long

12- As per sketch No. 2, support 6" to 12" long incl ..

13- As per sketch No. 2, support over 12" long

14- As per sketch No. 3, support less than 6" long

15- As per sketch No. 3, support 6" to 12" long incl

16- As per sketch No. 3, support over 12" long

4R290-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in smoke box superheater
support, dressing and finishing over weld complete.

Forge.

Per first place repaired :

20- As per sketch No.l

21- As per sketch No. 2, support less than 6" long

22- As per sketch No. 2, support 6" to 12" long incl

23- As per sketch No. 2, support over 12" long

24- As per sketch No. 3, support less than 6" long

25- As per sketch No. 3, support 6" to 12" long incl

26- As per sketch No. 3, support over 12" long

Per place repaired after first one :

30- As per sketch No.l

31- As per sketch No. 2, support less than 6" long

32- As per sketch No. 2, support 6" to 12" long incl

33- As per sketch No. 2, support over 12" long

34- As per sketch No. 3, support less than 6" long

35- As per sketch No. 3, support 6" to 12" long incl

36- As per sketch No. 3, support over 12" long

BOILER

Smoke Box Superheater Support

308

BLACKSMITH SHOP SCHEDULES.

Smoke Box

SUPERHEATER SUPPORT

4R290-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in smoke box superheater sup-
port, dressing and finishing over weld complete.

Forge.

Per first place repaired :

40- As per sketch No.l

41- As per sketch No. 2

42- As per sketch No. 3 •

Per place repaired after first one :

45- As per sketch No. 1

46- As per sketch No. 2

47- As per sketch No. 3

BOILER

Smoke Box Superheater Support

ASH PAN AND GRATE RIGGING

' ' '■>< • ■

i" ’"'■•'■•■■■

ASH PAN AND GRATE RIGGING

ASH PANS — GENERAL ARRANGEMENT

311

312

BLACKSMITH SHOP SCHEDULES.

Damper

BAR, LIFTER

^s/yPanOamperlZ/Zer

-Qrac/ref

4S10-13 Made.

Rate.

Includes getting material, blocking out and forging ash pan damper lifter
bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4S10-18 Straightened. Rate.......

Includes straightening old ash pan damper lifter bar when same has become
bent.

Forge :

1- Per first bar

2- Per bar after first one

4S10-21 Welded— new rounded end. , Rate

Includes getting material and welding new rounding end on ash pan damper
lifter bar, dressing and finishing end complete.

Forge :

1- Per first end

2- Per end after first one

ASH PAN

Damper Lifter Bar

ASH PAN AND GRATE RIGGING.

313

Damper

BAR, LIFTER— BRACKET

4S14-13 Made. Rate

Includes getting material, bending, dressing and finishing ash pan damper
lifter bar bracket complete.

Forge :

1- Per first bracket

2- Pjsr bracket after first one

4S14-18 Straightened. Rate

Includes straightening old ash pan damper lifter bar bracket when same has
become bent.

Forge :

1- Per. first bracket

2- Per bracket after first one

4S14-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper lifter bar
bracket, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

ASH PAN

Damper Lifter Bar Bracket

314

BLACKSMITH SHOP SCHEDULES.

Damper

CRANK, BELL

/75/7ft?/7 /?c7/7?per 3eJ/ CranHs

4S18-6 Dressed. Rate ..

Includes cutting jaws, dressing and finishing ash pan damper bell crank com-
plete after same has been forged.

Forge.

Per first bell crank :

1- As per sketch No.l

2- As per sketch No. 2

Per bell crank after first one :

3- As per sketch No. 1

4- As per sketch No. 2

4S18-9 Forged. Rate

Includes getting material, blocking out and forging ash pan damper bell
crank complete.

Steam hammer.

Per first bell crank :

1- As per sketch No. 1

2- As per sketch No. 2

Per bell crank after first one :

3- As per sketch No. 1

4- As per sketch No. 2

Forge.

Per first bell crank :

9-As per sketch No. 1

10- As per sketch No. 2

Per bell crank after first one :

11- As per sketch No.l

12- As per sketch No. 2

ASH PAN

Damper Bell Crank

ASH PAN AND GRATE RIGGING. ' 315

Damper

CRANK, BELL

4S18-12 Lengthened or shortened— by drawing out or upsetting.

Rate

Includes lengthening or shortening ash pan damper bell crank arm by draw-
ing out or upsetting same.

Forge :

1- Per first arm

2- Per arm after first one

4S18-12 Lengthened — by welding. Rate

Includes cutting ash pan damper bell crank arm, welding in required stock
and dressing to length complete.

Forge :

7- Per first arm

8- Per arm after first one

4S18-13 Made. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing ash pan damper bell crank complete.

Forge.

Per first bell crank :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bell crank after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S18-18 Straightened. Rate

Includes straightening old ash pan damper bell crank when same has be-
come bent.

Forge :

1- Per first place repaired i :

2- Per place repaired after first one

4S18-21 Welded — break. Rate...

Includes doing necessary scarfing welding break in ash pan damper bell
crank, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

ASH PAN
Damper Bell Crank

316

blacksmith shop schedules.

Damper

CRANK, BELL

4S18-21 Welded— crack. Rate

Includes making dutchman, welding same in crack in ash pan damper bell
crank, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4S18-21 Welded— new jaw end — making included. Rate

Includes getting material and making new jaw end for ash pan damper bell
crank arm, welding same on arm, dressing and finishing complete.

Forge :

13- Per first jaw end

14- Per jaw end after first one

4S18-21 Welded — new straight end— making included. Rate

Includes getting material, welding new straight end on ash pan damper bell
crank arm, dressing and finishing arm to shape complete.

Forge :

19- Per first straight end

20- Per straight end after first one

4S18-21 Welded — holes plugged. Rate >

Includes making plug, welding same in hole in ash pan damper bell crank,
dressing and finishing over weld complete.

Forge.

Per first hole :

25- In boss end

26- In jaw end

27- In straight end

Per hole after first one :

28- In boss end

29- In jaw end

30- In straight end

ASH PAN

Damper Bell Crank

ASH PAN AND GRATE RIGGING.

317

Damper

CRANK, BELL— FULCRUM

/75/7FanO(7r7?per3e//CranKru/crt//7J

■ r® j'li: ® ®||

V ^ s IJ

4S22-2 Bend changed. Rate

Includes changing bend in ash pan damper bell crank fulcrum.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S22-13 Made. Rate

Includes getting material, blocking out, forging, dressing and finishing ash
pan bell crank fulcrum complete.

Forge.

Per first fulcrum :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per fulcrum after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3 '

13- As per sketch No. 4

14- As per sketch No. 5

ASH PAN

Damper Bell Crank Fulcrum

318

BLACKSMITH SHOP SCHEDULES.

Damper

CRANK, BELL— FULCRUM

4S22-18 Straightened. Rate

Includes straightening old ash pan damper bell crank fulcrum when same
has become bent.

Forge.

Per first fulcrum :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per fulcrum after first one :

11- As per sketch No. 1

12- As per sketch No. 2

13- As per sketch No. 3 ;

14- As per sketch No. 4

15- As per sketch No. 5

4S22-21 Welded — break. Rate

Includes doing necessary scarfing, welding break in ash pan damper bell
crank fulcrum, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S22-21 Welded — crack. Rate.

Includes making dutchman, welding same in crack in ash pan damper bell
crank fulcrum, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4S22-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper bell crank
fulcrum, dressing and finishing over weld complete.

Forge :

13- Per first hole

14- Per hole after first one

ASH PAN

Damper Bell Crank Fulcrum

ASH PAN AND GRATE RIGGING.

319

Damper

DOOR HINGE

/7s.^/^/7/?a/7?joer

4S26-13 Made — complete. Rate

Includes getting material, blocking out, forging and dressing both eye and
shaft parts of ash pan damper door hinge.

Forge :

1- Per first hinge complete

2- Per hinge complete after first one

4S26-13 Made — shaft part only. Rate

Includes getting material, blocking out, forging, dressing and finishing shaft
part of ash pan damper door hinge.

Forge :

7- Per first shaft part —

8- Per shaft part after first one

4S26-13 Made — eye part. Rate. ..

Includes getting material, blocking out, forging, dressing and finishing com-
plete, eye part of ash pan damper door hinge.

Forge :

13- Per first eye part

14- Per eye part after first one

4S26-18 Straightened. Rate

Includes straightening either eye part or shaft part of ash pan damper door
hinge when same has become bent.

Forge :

1- Per first part straightened

2- Per part straightened after first one

ASH PAN
Damper Door Hinge

320

BLACKSMITH SHOP SCHEDULES.

Damper

DOOR HINGE

4S26-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in either eye part or shaft part of
ash pan damper door hinge, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

ASH PAN

Damper Door Hinge

ASH PAN AND GRATE RIGGING.

321

Damper

FASTENER

/7s/?R7/7

C/eanin<^ A?a/7?per /liste ner

4S34-13 Made. Rate...

Includes getting material, dressing and finishing complete, ash pan damper
fastener.

Forge :

1- Per first fastener

2- Per fastener after first one

4S34-18 Straightened. Rate

Includes straightening old ash pan damper fastener when same has become
bent.

Forge :

1- Per first fastener

2- Per fastener after first one

4S34-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper fastener,
dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one ■

ASH PAN
Damper Fastener

322

BLACKSMITH SHOP SCHEDULES.

Damper /75/7Fa/7Damperi/yr/yand/es

Damper Lift Handle

ASH PAN AND GRATE RIGGING.

323

Damper

HANDLE, LIFT

4S38-2 Bend changed. Rate

Includes changing bend in ash pan damper lift handle.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S38-13 Made. Rate

Includes getting material, blocking out, doing necessary welding, dressing
and finislung complete, ash pan damper lift handle.

Forge.

Per first handle :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

Per handle after first one :

11- -As per sketch No. 1

12- As per sketch No. 2

13- As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

17- As per sketch No. 7

4S38-18 Straightened. Rate.....

Includes straightening old ash pan damper lift handle when same has be-
come bent.

Forge.

Per first place repaired :

1- As per sketch No. 1..;

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

Per place repaired after first one ;

11- As per sketch No. 1

12- As per sketch No. 2

13^As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

17- As per sketch No. 7 ’

ASH PAN
Damper Lift Handle

324

BLACKSMITH SHOP SCHEDULES.

Damper

HANDLE, LIFT

4838^21 Welded — break. Rate

Includes doing necessary scarfing, welding break in ash pan damper lift
handle, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one ,

4S38-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper lift handle,
dressing and finishing over weld complete.

Forge.

Per first hole :

7- In jaw end ,

8- In straight end

Per hole after first one :

11- In jaw end

12- In straight end

4S38-21 Welded — new jaw end — making included. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing complete, jaw end for ash pan damper lift handle, welding jaw on
body of handle, dressing and finishing to shape complete.

Forge.

Per first jaw end :

17- As per sketch No. 2

18- As per sketch No. 3

19- As per sketch No. 6

Per jaw end after first one :

22- As per sketch No. 2

23- As per sketch No. 3

24- As per sketch No. 6

4S38-21 Welded — new straight end — making included. Rate

Includes getting material, dressing, bending and finishing ash pan damper
lift handle straight end, and welding end on body of handle complete.

Forge :

31- Per first straight end

32- Per straight end after first one.

ASH PAN

Damper Lift Handle

ASH PAN AND GRATE RIGGING.

325

Damper

HOOK, BACK

4S46-13 Made. Rate

Includes getting material, bending, dressing and finishing ash pan damper
back hook complete.

Forge :

1- Per first hook

2- Per hook after first one

4S46-18 Straightened. Rate..

Includes straightening old ash pan damper back hook when same has become
bent.

Forge :

1- Per first hook •.

2- Per hook after first one

4S46-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper back hook,
dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

ASH PAN
Damper, Back Hook

326

BLACKSMITH SHOP SCHEDULES.

Damper

ROD, CONNECTING

/75/7Par?Oo/7?perConnecT/n^ffoa

(© f.

/7s/7 Ai7n Damper Connecting ffod

(^2

I

/7sn Pan Damper Connecting Pods

(f It.

I

3

Psn Pan Damper connecting Pods

s.

Qi’ ~L

P3/7 Pan Damper Connecting Pods

(E

I

3

a

4S60-2 Bend changed.

Includes changing bend in ash pan damper connecting rod.
Forge.

Per first bend changed :

* 1-As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

Per bend changed after first one :

11- As per sketch No.l

12- As per sketch No. 2

13- As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

17- As per sketch No. 7

Rate

1

)

\

ASH PAN

Damper Connecting Rod

ASH PAN AND GRATE RIGGING.

327

Damper

ROD, CONNECTING

4S60-12 Lengthened or shortened. Rate

Includes lengthening or shortening ash pan damper connecting rod by draw-
ing out or upsetting same.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3 -

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

8- As per sketch No. 8

Per rod after first one :

11- As per sketch No. 1

12- As per sketch No. 2

13- As per sketch No. 3 !..

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

17- As per sketch No. 7

18- As per sketch No. 8

4S60-12 Lengthened or shortened — by welding. Rate

Includes cutting ash pan damper connecting rod, taking out required stock
to shorten or welding in necessary stock to lengthen, dressing and finishing
to new length complete.

Forge.

Per first rod :

23- As per sketch No. 1

24- As per sketch No. 2

25- As per sketch No. 3

26- As per sketch No. 4

27- As per sketch No. 5

28- As per sketch No. 6

29- As per sketch No. 7

Per rod after first one :

34r-As per sketch No. 1

35- As per sketch No. 2

36- As per sketch No. 3

37- As per sketch No. 4

38- As per sketch No. 5

39- As per sketch No. 6 !....

40- As per sketch No. 7

ASH PAN

Damper Connecting Rod

328

BLACKSMITH SHOP SCHEDULES.

Damper

ROD, CONNECTING

4S60-13 Made complete. Rate

Includes getting material, forging, doing necessary welding, bending, dress-
ing and finishing complete, ash pan damper connecting rod.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

8- As per sketch No. 8

Per rod after first one :

13- As per sketch No. 1

14- As per sketch No. 2

15- As per sketch No. 3

16- As per sketch No. 4

17- As per sketch No. 5

18- As per sketch No. 6

19- As per sketch No. 7 •

20- As per sketch No. 8

4S60-21 Welded (break). Rate. ..

Includes doing necessary scarfing, welding break in ash pan damper con-
necting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

8- As per sketch No. 8

Per place repaired after first one :

13- As per sketch No. 1

14- As per sketch No. 2

15- As per sketch No. 3

16- As per sketch No. 4

17- As per sketch No. 5

18- As per sketch No. 6

19- As per sketch No. 7

20- As per sketch No. 8

ASH PAN

Damper Connecting Rod

ASH PAN AND GRATE RIGGING.

329

Damper

ROD, CONNECTING

4S60-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in ash pan damper con-
necting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4

29- As per sketch No. 5 •

30- As per sketch No. 6

31 - As per sketch No. 7

32- As per sketch No. 8

Per place repaired after first one :

37- As per sketch No. 1

38- As per sketch No. 2 .

39- As per sketch No. 3

40- As per sketch No. 4

41- As per sketch No. 5

42- As per sketch No. 6

43- As per sketch No. 7

44- As per sketch No. 8

4S60-21 Welded (straight end) (making included). Rate

Includes getting material, bending, dressing and finishing straight end of
ash pan damper connecting rod, welding end on body of rod, dressing and
finisliing complete.

Forge.

Per first end :

49- As per sketch No. 4

50- As per sketch No. 5

51- As per sketch No. 8

Per end after first one :

56- As per sketch No. 4

57- As per sketch No. 5 '

58- As per sketch No. 8

ASH PAN

Damper Connecting Rod

330

BLACKSMITH SHOP SCHEDULES.

Damper

ROD, CONNECTING

4S60-21 Welded (jaw end) (making included.) Rate

Includes getting material, forging, cutting jaw, dressing and finishing jaw
end of ash pan damper conhecting rod, welding jaw on body of rod, dressing
and finishing complete.

Forge,

I Per first jaw end :

61- As per sketch No. 1

62- As per sketch No. 2

63- As per sketch No, 3

64- As per sketch No, 4

65- As per sketch No. 5

66- As per sketch No. 6

67- As per sketch No. 7

Per jaw end after first one :

71- As per sketch No. 1

72- As per sketch No. 2

73- As per sketch No. 3

74- As per sketch No. 4

75- As per sketch No. 5

76- As per sketch No. 6

77- As per sketch No.7

4S60-21 Welded (holes plugged) (in jaw end). Rate ..

Includes making plug, welding same in hole in jaw end of ash pan damper
connecting rod, dressing and finishing over weld complete.

Forge.

Per first hole :

81- As per sketch No. 1

82- As per sketch No. 2

83- As per sketch No. 3

84- As per sketch No. 4

85- As per sketch No. 5

86- As per sketch No. 6

87- As per sketch No. 7

Per hole after first one :

91- As per sketch No. 1

92- As per sketch No. 2

93- As per sketch No. 3 -

94- As per sketch No. 4

95- As per sketch No. 5

96- As per sketch No. 6

97- As per sketch No. 7

PAN

Damper Connecting Rod

ASH PAX AXD GRATE RIGGING.

331

Damper

ROD, CONNECTING-LINK, INTERMEDIATE-
SUPPORT

4S66-13 Made. Rate

Includes getting material, bending, dressing and finishing ash pan damper
connecting rod intermediate link support to shape complete.

Forge.

Per first half of support :

1- As per sketch Xo. 1

2- As per sketch No. 2

Per half of support after first one :

7- As per sketch Xo. 1

8- As per sketch Xo. 2

4S66-18 Straightened. Rate. ..

Includes straightening old ash pan damper connecting rod intermediate fink
support when same has become bent.

Forge.

Per first half of support :

1- As per sketch Xo. 1

2- As per sketch Xo.2

Per half of support after first one :

7- As per sketch Xo. 1

8- As per sketch No.2

4S66-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper connecting
rod intermediate fink support, dressing and finishing over weld complete.

Forge.

Per first hole :

1- As per sketch Xo.l

2- As per sketch Xo. 2

Per hole after first one :

7- As per sketch Xo. 1

8- As per sketch Xo. 2 •

ASH PAN

Damper Connecting Rod — Intermediate Link Support

332

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT

/7shPa/7 Damper

ffsDPaa Damper SDa//

/e.

/7s/?Pa/7/7o/vper S/;a//

3 . ■ ~ """

4S70-4 Cut— Iron. ' Rate

includes cutting iron at power shears for ash pan damper shaft.

Power shears.

Per piece cut :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4S70-12 Lengthened or shortened. Rate

Includes lengthening or shortening ash pan damper shaft by drawing out or
upsetting same.

Forge.

Per first shaft :

1- As per sketch No. 1

2- As per sketch No. 2 -

3- As per sketch No. 3

ASH PAN

Damper Shaft

ASH PAN AND GRATE RIGGING.

333

Damper

SHAFT

Per shaft after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10-As per sketch No. 3

4S70-13 Made. Rate.

Includes getting material, forging all arms and body, welding arms on body,
' dressing, squaring and finishing ash pan damper shaft complete.

Forge.

Per first shaft :

1- As per sketch No. 1 ^

2- As per sketch No. 2

•3-As per sketch No. 3 •

Per shaft after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S70-18 Straightened. Rate

Includes straightening old ash pan damper shaft when same has become bent.
Forge.

Per first shaft :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

• Per shaft after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S70-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in ash pan damper shaft,
dressing and finishing over weld complete.

Forge.

Per first place repaired in shaft :

1-As per sketch No. 1

Per place repaired after first one in shaft :

5- As per sketch No. 1

ASH PAN
Damper Shaft

334

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT

4S70-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in ash pan damper shaft,
dressing and finishing over weld complete.

Forge.

Per first place repaired in shaft :

10-As per sketch No. 1 —

Per place repaired after first one in shaft :

, 14-As per sketch No. 1

4S70-21 Welded (new end). Rate

*

Includes getting material and 'welding new end on ash pan damper shaft,
dressing and squaring up end complete.

Forge.

Per first end :

19- As per sketch No. 2

Per end after first one :

24-As per sketch No. 2 —

ASH PAN

Damper Shaft

ASH PAN AND GRATE RIGGING.

335

Damper

SHAFT, ARM

4S72-12 Lengthened or shortened. Rate

Includes lengthening or shortening ash pan damper shaft arm by drawing
out or upsetting same.

Forge :

1- Per first arm

2- Per arm after first one

4S72-13 Made and welded on shaft. Rate

Includes getting material, blocking out, forging, cutting jaw if necessary,
dressing and finishing ash pan damper shaft arm, doing necessary scarfing,
welding arm on shaft, squaring arm and finishing complete.

Forge.

Per first arm :

1- Arm A

2- Arm B

3- Arm C —

Per arm after first one :

7- Arm A

8- Arm B

9- Arm C

4S72-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in ash pan damper shaft
arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S72-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper shaft arm,
dressing and finishing over weld complete.

Forge.

Per first hole :

7- In jaw of arm A

8- In end of arm B

9- In end of arm C

Per hole after first one :

14- In jaw of arm A

15- In end of arm B

16- In end of arm C

ASH PAN
Damper Shaft Arm

336

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT, VERTICAL— ARM, LOOSE

4S76-2 Bend changed. Rate

Includes changing bend in ash pan damper vertical shaft loose arm.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S76-6 Dressed, bent and finished. Rate

Includes dressing, bending and finishing ash pan damper vertical shaft
loose arni complete, after same has been forged.

Forge :

1- Per first arm

2- Per arm after first one

4S76-9 Forged. Rate

Includes getting material, blocking out and forging ash pan damper vertical
shaft loose arm complete, ready for dressing.

Forge : i

1- Per first arm

2- Per arm after first one

4S76-13 Made complete at forge. Rate

Includes getting material, blocking out and forging ash pan damper vertical
shaft loose arm, bending, dressing and finishing complete.

Forge :

1- Per first arm

2- Per arm after first one

ASH PAN

Damper Vertical Shaft Loose Arm

ASH PAN AND GRATE RIGGING.

337

Damper

SHAFT, VERTICAL— ARM, LOOSE

4S76-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in ash pan damper
vertical shaft loose arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S76-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper vertical
shaft loose arm, dressing and finishing over weld complete.

Forge.

Per first hole :

7- In boss end

8- In small end

Per hole after first one :

13- In boss end

14- In small end

ASH PAN

Damper Vertical Shaft Loose Arm

338

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT BOX

/?s/7Fa/7 Damper

4S80-13 Made. Rate

Includes getting material, blocking out, forging, dressing and finishing ash
pan damper shaft box.

Forge :

1- Per first box

2- Per box after first one

4S80-18 Straightened. Rate

Includes straightening old ash pan damper shaft box when same has be-
come bent.

Forge :

1- Per first box

2- Per box after first one

4S80-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan damper shaft box,
dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one -

ASH PAN

Damper Shaft Box

ASH PAN AND GRATE RIGGING.

339

Dump, Drop

CRANK, BELL

A5h Pan Drop Dump

4S100-2 Bend changed. Rate.....

Includes changing bend in drop dump ash pan bell crank.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S 100-6 Dressed and finished complete. Rate

Includes cutting jaws, dressing and finishing complete, drop dump ash pan
bell crank after same has been forged.

Forge :

1- Per first bell crank .

2- Per bell crank after first one

4S 100-9 Forged. Rate

Includes getting material, blocking out and forging drop dump bell crank
complete, ready for dressing.

Steam hammer :

1- Per first bell crank

2- Per bell crank after first one

Forge :

3- Per first bell crank

4- Per bell crank after first one

4S100-12 Lengthened or shortened. Rate

Includes lengthening or shortening arms of drop dump ash pan bell crank.
Forge :

1- Per first arm

2- Per arm after first one

ASH PAN

Dump, Drop — Bell Crank

340

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

CRANK, BELL

4S100-18 Straightened. Rate

Includes straightening old drop dump bell crank when same has become
bent or twisted.

Forge :

1- Per first bell crank

2- Per bell crank after first one

4S100-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in drop dump bell crank,
dressing and finishing over weld complete.

■ Forge :

1- Per first place repaired

2- Per place repaired after first one

4S100-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in drop dump bell crank
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S100-21 Welded (holes plugged) (in jaw end). Rate

Includes making plug, welding same in hole in drop dump bell crank, dress-
ing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

4S100-21 Welded (new arm) (including making). Rate

Includes getting material, forging, cutting jaw and dressing new arm for
drop dump ash pan bell crank, doing necessary welding, welding arm in
place on crank, dressing and finishing arm complete.

Forge :

13- Per fifst arm

14- Per arm after first one ,

4S100-21 Welded (new arm) (dressed and welded only). Rate

Includes getting new arm for drop dump bell crank after same has been
forged, cutting jaw and dressing arm, doing necessary scarfing, welding
arm in place on bell crank, dressing and finishing arm complete.

Forge :

16- Per first arm

17- Per arm after first one *

ASH PAN

Dump, Drop — Bell Crank

ASH PAN AND GRATE RIGGING.

341

Dump, Drop

CRANK, BELL— ARM

4S102-9 Forged. Rate

Includes getting material, blocking out and forging drop dump ash pan
bell crank arm complete.

Steam hammer :

1- Per first arm

2- Per arm after first one

Forge :

3- Per first arm

4- Per arm after first one

ASH PAN

Dump, Drop — Bell Crank Arm

342

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

CRANK, OPERATING

/Z 5/7 Pan Drop Dump Opera f/n^ CranA

4S108-2 Bend changed. Rate

Includes changing bend in drop dump ash pan operating crank.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S108-3 Closed (holes). Rate

Includes closing hole in boss end of drop dump ash pan operating crank.
Forge :

1- Per first hole closed

2- Per hole closed after first one

4S108-6 Dressed. Rate

Includes dressing and finishing complete, drop dump ash pan operating
crank after same has been forged.

Forge :

1- Per first crank

2- Per crank after first one —

4S108-9 Forged. Rate

Includes getting material, blocking out, forging drop dump ash pan operating
crank complete, ready for dressing.

Steam hammer :

1- Per first crank

2- Per crank after first one

Forge :

3- Per first crank

4- Per crank after first one

ASH PAN

Dump, Drop — Operating Crank

ASH PAN AND GRATE RIGGING.

343

Dump, Drop

CRANK, OPERATING

4S108-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing, bending and fin-
ishing complete, drop dump ash pan operating crank.

Steam hammer :

8- Per first crank

9- Per crank after first one

Forge :

12- Per first crank

13- Per crank after first one

4S108-12 Lengthened or shortened. , Rate

Includes lengthening or shortening drop dump ash pan operating crank by
drawing out or upsetting same.

Forge :

1- Per first crank

2- Per crank after first one

4S108-18 Straightened. Rate

Includes straightening old drop dump operating crank when same has be-
come bent or twisted.

Forge :

1- Per first crank

2- Per crank after first one

4S108-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in drop dump operating
crank, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S 108-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in drop dump operating
crank, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

ASH PAN

Dump, Drop — Operating Crank

344

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

CRANK, OPERATING

4S108-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in drop dump operating crank,
dressing and finishing over weld complete.

Forge :

9-Per first hole »

10-Per hole after first one

4S108-21 Welded (new boss end). Rate

Includes getting material and forging new boss end for drop dump ash pan
operating crank, doing necessary scarfing, welding end on body of crank,
dressing and finishing end to shape complete.

Forge :

12- Per first end

13- Per end after first one

4S108-21 Welded (new flat end). Rate

Includes getting necessary material, welding same on flat end of drop dump
ash pan operating crank, dressing, bending and finishing end to shape com-
plete.

Forge :

16- Per first end

17- Per end after first one ■ —

ASH PAN

Dump, Drop — Operating Crank

ASH PAN AND GRATE RIGGING.

345

Dump, Drop

ROD, CONNECTING

Ash Pan Drop Dump Connect /ng Rod

Ash Pan Drop Dump Connec f/ng Rod

/i5h Pan D/vp Dump Cor? nee f/ng Rod

3

4S140-2 Bend changed. Rate

Includes changing bend in drop dump ash pan connecting rod.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per bend changed after first one :

6- As per sketch No. 1

7- As per sketch No. 2

8- As per sketch No. 3

4S 140-12 Lengthened or shortened. Rate

Includes lengthening or shortening drop dump ash pan connecting rod.
Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :

6- As per sketch No. 1

7- As per sketch No. 2 . .

8- As per sketch No. 3

ASH PAN

Dump, Drop — Connecting Rod

346

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

ROD, CONNECTING

4S140-13 Made. Rate

Includes getting material, forging, cutting jaw if necessary, dressing and
finishing drop dump ash pan connecting rod complete.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :

6- As per sketch No. 1

7- As per sketch No. 2

8- As per sketch No. 3

4S 140-18 Straightened. Rate

Includes straightening old drop dump connecting rod when same has become
bent or twisted.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :

6- As per sketch No. 1

7- As per sketch No. 2

8- As per sketch No. 3

4S140-21 Welded (break). ' Rate

Includes doing necessary scarfing, welding break in drop dump connecting
rod, dressing and finishing over weld complete.

Forge.

Per first place repaired : -

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

6- As per sketch No. 1

7- As per sketch No. 2

8- As per sketch No. 3

ASH PAN

Dum.p, Drop — Connecting Rod

ASH PAN AND GRATE RIGGING.

347

Dump, Drop

ROD, CONNECTING

4S140-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in drop dump connecting
rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

Per place repaired after first one :

16- As per sketch No. 1 '

17- As per sketch No. 2

18- As per sketch No. 3

4S140-21 Welded (new jaw end). Rate

Includes getting material and forging out drop dump ash pan connecting
rod jaw end, dressing jaw, welding same on end of connecting rod, and
finisMng end complete.

Forge.

Per first end :

23-As per sketch No. 3

Per end after first one :

25-As per sketch No. 3 i

4S140-21 Welded (new flat end). Rate

Includes getting material for flat end, welding same on end of drop dump ash
pan connecting rod, dressing and finishing end to shape complete.

Forge.

Per first end :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

Per end after first one :

36- As per sketch No. 1

37- As per sketch No. 2

38- As per sketch No. 3

ASH PAN

Dump, Drop — Connecting Rod

348

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

ROD, CONNECTING

4S140-21 Welded (new bent end). Rate

Includes getting material for bent end, welding same on end of drop dump ash
pan connecting rod, bending, dressing and finishing end to shape complete.

Forge.

Per first end :

46-As per sketch No. 2

Per end after first one :

50- As per sketch No. 2

ASH PAN

Dump, Drop — Connecting Rod

ASH PAN AND GRATE RIGGING.

349

Dump, Drop

ROD, LIFTING

/Ish Pan Drop Dump
Lift/ng Roof

4S 146-2 Bend changed. Rate

Includes changing bend in drop dump ash pan lifting rod.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S 146-6 Dressed. i Rate

Includes dressing and finishing drop dump ash pan lifting rod complete.
Forge :

1- Per first rod . . . /

2- Per rod after first one

4S146-9 Forged (in one piece). Rate

Includes getting material and forging drop dump ash pan lifting rod in one
'piece complete, ready for dressing.

Steam hammer :

1- Per first rod

2- Per rod after first one

Forge :

3- Per first rod

4- Per rod after first one ,

4S146-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing drop
• dump ash pan lifting rod complete.

Forge :

5- Per first rod

6- Per rod after first one

4S146-12 Lengthened or shortened. Rate

Includes lengthening or shortening drop dump ash pan lifting rod.

Forge :

1- Per first rod

2- Per rod after first one

ASH PAN

Dump, Drop — Lifting Rod

350

BLACKSMITH SHOP SCHEDULES:

Dump, Drop

ROD, LIFTING

4S146-18 Straightened. Rate

Includes straightening old drop dump lifting rod when same has become bent
or twisted.

Forge :

1- Per first rod

2- Per rod after first one

4S146-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in drop dump lifting rod,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S146-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in drop drum lifting rod,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S146-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in drop dump lifting rod, dressing
and finishing over weld complete.

Forge ;

10- Per first hole

11- Per hole after first one

4S146-21 Welded (new boss end) (after same has been forged). Rate

Includes getting new boss end after same has been forged, doing necessary
scarfing, welding same on body of drop dump ash pan lifting rod.

Forge :

15- Per first end

16- Per end after first one

ASH PAN

Dump, Drop — Lifting Rod

ASH PAN AND GRATE RIGGING.

351

Dump, Drop

ROD, LIFTING— END, BOSS

4S150-9 Forged. Rate

Includes getting material, blocking out and forging boss end of drop dump
ash pan lifting rod.

Steam hammer :

1- Per first end

2- Per end after first one

Forge :

3- Per first end ^

4- Per end after first one

4S 150-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, boss end of drop dump ash pan lifting rod.

Forge :

8- Per first end '

9- Per end after first one

ASH PAN

Dump, Drop — Lifting Rod Boss End

352

BLACKSMITH SHOP SCHEDULES.

Dump, Drop
SHAFT

//3/7 Pan Drop Dufnp Shaft

4S166-13 Made. Rate

Includes getting material, forging, dressing and finishing complete, ash pan
drop dump shaft.

Forge :

1- Per first shaft

2- Per shaft after first one •.

4S156-18 Straightened. Rate

Includes straightening old ash pan drop dump shaft when same has become
bent.

Forge :

1- Per first shaft *.

2- Per shaft after first one . :

4S156-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in ash pan drop dump
shaft, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S156-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in ash pan drop dump
shaft, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one -

4S156-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan drop dump shaft,
dressing and finishing over weld complete.

Forge :

10- Per first hole -

1 1- Per -hole after first one

ASH PAN

Dump, Drop — ^Shaft

ASH PAN AND GRATE RIGGING.

353

Dump, Drop

SHAFT ARM

As/ 7 Pan Drop Dump
3 haft Arm

4S160-6 Dressed. Rate

Includes dressing and finishing complete, drop dump ash pan shaft arm.
Forge :

1- Per first arm

2- Per arm after first one -

4S160-9 Forged. Rate

Includes getting material, blocking out and forging drop dump ash pan shaft
arm complete.

Steam hammer :

1- Per first arm

2- Per arm after first one

Forge :

3- Per first arm

4- Per arm after first one

4S 160-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing drop
dump ash pan shaft arm complete.

Forge :

8- Per first arm

9- Per arm after first one

4S160-12 Lengthened or shortened. Rate

Includes lengthening or shortening drop dump ash pan shaft arm by draw-
ing out or upsetting same.

Forge :

1- Per first arm

2- Per arm after first one ‘

ASH PAN

Dump, Drop — Shaft Arm

354

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

SHAFT ARM

4S160-13 Made (from bar iron). Rate

Includes getting bar iron, forging, dressing and finishing same to form drop
dump ash pan shaft arm complete.

Forge :

1- Per first arm

2- Per arm after first one

4S160-18 Straightened. Rate

Includes straightening old drop dump ash pan shaft arm when same has be-
come bent.

Forge :

1- Per first arm

2- Per arm after first one

4S160-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in drop dump ash pan
shaft arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S160-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in drop dump ash pan
shaft arm, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S160-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in drop dump ash pan shaft
arm, dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

ASH PAN

Dump, Drop — Shaft Arm

ASH PAN AND GRATE RIGGING.

355

Dump, Drop

SHAFT BOX

X 5/7 Pan Drop Dump
Shaft Boa

4S164-6 Dressed. Rate

Includes dressing and finishing complete, drop dump ash pan shaft box
after same has been forged.

Forge :

1- Per first box

2- Per box after first one

4S164-9 Forged. Rate

Includes getting material, blocking out, and forging drop dump ash pan
shaft box complete, ready for dressing.

Steam hammer :

1- Per first box

2- Per box after first one

Forge :

3- Per first box

4- Per box after first one -

4S 164-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, drop dump ash pan shaft box.

Forge :

7- Per first box

8- Per box after first one

4S 164-18 Straightened. Rate

Includes straightening old drop dump ash pan shaft box when same has
become bent.

Forge :

1- Per first box

2- Per box after first one

ASH PAN

Dump, Drop — Shaft Box

356

BLACKSMITH SHOP SCHEDULES.

Dump, Drop

SHAFT BOX

4S164-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in drop dump ash pan shaft
box, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S164-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in drop dump ash pan
shaft box, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S164-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in drop dump ash pan shaft
box, dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

ASH PAN

Dump, Drop — Shaft Box

ASH PAN AND GRATE RIGGING.

357

Dump, Slide

CYLINDER— ROD, PISTON

/9s/? Pan 5hde Dump Cy//nder P/sfon Rocf

4S180-9 Forged. Rate

Includes getting material, blocking out and forging complete, slide dump
ash pan cylinder piston rod.

Steam hammer :

1- Per first rod

2- Per rod after first one -

Forge :

3- Per first rod

4- Per rod after first one

4S 180-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing slide
dump ash pan cyhnder piston rod complete.

Forge :

7- Per first rod

8- Per rod after first one

4S180-18 Straightened. Rate

Includes straightening old slide dump ash pan cylinder piston rod when
same has become bent.

Forge :

1- Per first rod

2- Per rod after first one

4S180-21 Welded (break). Rate -

Includes doing necessary scarfing, welding break in slide dump ash pan
cylinder piston rod, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S180-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in slide dump ash pan
cylinder piston rod, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

ASH PAN

Dump, Slide — Cylinder Piston Rod

358

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

CYLINDER— ROD, PISTON

4S180-21 Welded (holes plugged). Rate

‘ Includes making plug, welding same in hole in slide dump ash pan cylin-
der piston rod, dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

4S180-21 Welded (new boss end). Rate

Includes getting necessary material, welding same on slide dump ash pan
cylinder piston rod, dressing and finishing end to shape complete.

Forge :

13- Per first end

14- Per end after first one

ASH PAN

Dump, Slide — Cylinder Piston Rod

ASH PAN AND GRATE RIGGING.

359

Dump, Slide

CYLINDER SUPPORT

/f5/7 Pon Slide Pump Cyl/nder Supports

360

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

CYLINDER SUPPORT

4S186-2 Bend changed. Rate.

Includes changing bend in ash pan slide dump cylinder support.

Forge.

Per first bend changed :

1- As per sketch No.

2- As per sketch No.

3- As per sketch No.

4- As per sketch No.

5- As per sketch No.

6- As per sketch No.

7- As per sketch No.

8- As per sketch No.

9- As per sketch No.

1 .

3.

4.

5.

6 .

7.

8 .
9.
10

Per bend changed after first one :

12- As per sketch No. 1 .

13- As per sketch No. 3 .

14- As per sketch No. 4 .

15- As per sketch No. 5 .

16- As per sketch No. 6 .

17- As per sketch No. 7 .

18- As per sketch No. 8 .

19- As per sketch No. 9 .

20- As per sketch No. 10

4S186-4 Cut — Iron.

Rate.

Includes cutting iron at forge or power shears for ash pan slide dump cylin-
der support, and grinding ends of same at emery wheel when cut at power
shears.

Power shears and emery wheel.

Per piece cut :

1- As per sketch No. 2

2- As per sketch No. 11

For^e.

Per first piece cut :

5-As per sketch No. 11

Per piece cut after first one : '

7- As per sketch No. 11

ASH PAN

Dump, Slide — Cylinder Support

ASH PAN AND GRATE RIGGING.

361

Dump, Slide

CYLINDER SUPPORT

4S 186-12 Lengthened or shortened.

Rate.

Includes lengthening or shortening ash pan slide dump cylinder support
by drawing out or upsetting same.

Forge.

Per first support :

1- As per sketch No. 3

2- As per sketch No. 4 . . .

3- As per sketch No. 5, per side .

4- As per sketch No. 6, per side .

5- As per sketch No. 7

6- As per sketch No. 8

Per support after first one :

9-As per sketch No. 3 . . !

10- As per sketch No. 4

11- As per sketch No. 5, per side

12- As per sketch No. 6, per side

13- As per sketch No. 7

14- As per sketch No. 8

4S186-13 Made (from bar iron).

Rate.

Includes getting bar iron, bending, dressing and finishing ash pan slide dump
cylinder support complete.

Forge.

Per first support :

1- As per sketch No. 1 . .

2- As per sketch No. 2 . .

3- As per sketch No. 3 . .

4- As per sketch No. 4 . .

5- As per sketch No. 5 . .

6- As per sketch No. 6 . .

7- As per sketch No. 7 . .

8- As per sketch No. 8 . .

9- As per sketch No. 9 . .
10-As per sketch No. 10 .

Per support after first one :

15- As per sketch No. 1 . .

16- As per sketch No. 2 . .

17- As per sketch No. 3 . .

18- As per sketch No. 4 . .

19- As per sketch No. 5 . .

20- As per sketch No. 6 . .

21- As per sketch No. 7 . .

22- As per sketch No. 8 . .

23- As per sketch No. 9 . .

24- As per sketch No. 10 .

ASH PAN

Dump, Slide — Cylinder Support

362

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

CYLINDER SUPPORT

4S186-18 Straightened. Rate.

Includes straightening old ash pan slide dump cylinder support when same
has become bent. ^

Forge.

Per first support :

1- As per sketch No. 1 '

2- As per sketch No. 2

3- As per sketch No. 3 _

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- A^ per sketch No. 7

8- As per sketch No. 8

9- As per sketch No. 9

10- As per sketch No. 10

11- As per sketch No. 11

Per support after first one :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

19- As per sketch No. 5

20- As per sketch No. 6

21- As per sketch No. 7

22- As per sketch No. 8

23- As per sketch No. 9

24- As per sketch No. 10

25- As per sketch No. 11

4S186-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in ash pan slide dump
cylinder support, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 .

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5 -

6- As per sketch No. 6

7- As per sketch No. 7

8- As per sketch No. 8

9- As per sketch No. 9

10-As per sketch No. 10

ASH PAN

Dump, Slide — Cylinder Support

ASH PAN AND GRATE RIGGING.

363

Dump, Slide

CYLINDER SUPPORT

Per place repaired after

15- As per sketch No.

16- As per sketch No.

17- As per sketch No.

18- As per sketch No.

19- As per sketch No.

20- As per sketch No.

21- As per sketch No.

22- As per sketch No.

23- As per sketch No.

24- As per sketch No.

first one :

1

2

3

4

5

6

7

8

9

10

4S186-21 Welded (crack).

Rate

Includes making dutchman, welding same in crack in ash pan slide dump
cylinder support, dressing and finishing over weld complete.

Forge.

Per first place repaired :

30- As per sketch No. 1 .

31- As per sketch No. 2 .

32- As per sketch No. 3 .

33- As per sketch No. 4 .

34- As per sketch No. 5 .

35- As per sketch No. 6 .

36- As per sketch No. 7. .

37- As per sketch No. 8 .

38- As per sketch No. 9 .

39- As per sketch No. 10

Per place repaired after first one :

45- As per sketch No. 1

46- As per sketch No. 2

47- As per sketch No. 3

48- As per sketch No. 4

49- As per sketch No. 5

50- As per sketch No. 6

51- As per sketch No. 7

52- As per sketch No. 8

53- As per sketch No. 9

54- As per sketch No. 10

ASH PAN

Dump, Slide — Cylinder Support

364

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

CYLINDER SUPPORT

4S186-21 Welded (holes plugged). Rate.

Includes making plug, welding same in hole in ash pan slide dump cylinder
support, dressing and finishing over weld complete.

Forge.

Per first hole :

60- As per sketch No.

61- As per sketch No.

62- As per sketch No.

63- As per sketch* No.

64- As per sketch No.

65 - As per sketch No.

66- As per sketch No.

67- As per sketch No.

68- As per sketch No.

69- As per sketch No.

1 .

2 .

3.

4.

5.

6 .

7.

8 .
9.
10

Per hole after first one :

75- As per sketch No. 1 .

76- As per sketch No. 2 .

77- As per sketch No. 3 .

78- As per sketch No. 4 .

79- As per sketch No. 5 .

80- As per sketch No. 6 .

81- As per sketch No. 7 .

82- As per sketch No. 8 .

83- As per sketch No. 9 .

84- As per sketch No. 10

ASH PAN

Dump, Slide — Cylinder Support

ASH PAN AND GRATE RIGGING.

365

Dump, Slide

ROD, CONNECTING

/?5/7 Par? 5//(fe Dump Cor?nect/ng Rod

Ash Pan 51/de Dump Connect mg Rod

a

Ash Pan Slide Dump Connecting Roof

3

4S 190-2 Bend changed. ' Rate

Includes changing bend in slide dump ash pan connecting rod.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bend changed after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S190-12 Lengthened or shortened. Rate

Includes lengthening or shortening slide dump ash pan connecting rod by
drawing out or upsetting same.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

ASH PAN

Dump, Slide — Connecting Rod

366

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

ROD, CONNECTING

4S 190-13 Made. Rate

Includes getting material, blocking out and forging jaw, welding same on
ends of slide dump connecting rod, or cutting, material to length, doing nec-
essary bending, dressing and finishing slide dump ash pan connecting rod
complete.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :■

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4S190-18 Straightened. Rate

Includes straightening old slide dump ash pan connecting rod when same
has become bent.

Forge.

Per first rod :

1- As per sketch No.l

2- As per sketch No. 2 '

3- As per sketch No. 3

Per rod after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4S190-21 Welded (break)., Rate

Includes doing necessary scarfing, welding break in slide dump ash pan con-
necting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

ASH PAN

Dump, Slide^ — Connecting Rod

ASH PAN AND GRATE RIGGING.

367

Dump, Slide

ROD, CONNECTING

4S190-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in slide dump ash pan
connecting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3 •

Per place repaired after first one :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 3

4S190-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in slide dump ash pan connect-
ing rod, dressing and finishing over weld complete.

Forge.

Per first hole :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

Per hole after first one :

32- As per sketch No. 1

33- As per sketch No. 2

34- As per sketch No.3

4S190-21 Welded (new flat end). Rate

Includes getting material, welding necessary stock on flat end of slide dump
ash pan connecting rod, dressing and finishing end to shape complete.

Forge.

Per first end :

40- As per sketch No. 2

41- As per sketch No. 3

Per end after first one :

45- As per sketch No. 2

46- As per sketch No. 3

ASH PAN

Dump, Slide — Connecting Rod

368

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

ROD, CONNECTING

4S190-21 Welded (new jaw) (including making). Rate

Includes getting material, blocking out and forging jaw, welding same on
end of slide dump ash pan connecting rod, dressing and finishing end to
shape complete.

Forge :

54- Per first end

55- Per end after first one

4S190-21 Welded (new jaw) (after same has been made). Rate

Includes getting jaw after same has been made, doing necessary scarfing,
welding jaw on end of slide dump ash pan connecting rod, dressing and fin-
ishing complete.

Forge :

60- Per first end

61- Per end after first one

ASH PAN

Dump, Slide — Connecting Rod

ASH PAN AND GRATE RIGGING.

369

Dump, Slide

ROD, CONNECTING— END, JAW

4S194-13 Made. Rate

Includes getting material, blocking out, forging and dressing jaw end of slide
dump ash pan connecting rod complete, ready for welding to rod.

Forge :

1- Per first end

2- Per end after first one

ASH PAN

Dump, Slide — Connecting Rod Jaw End

370

BLACKSMITH SHOP SCHEDULES.

Dump, Slide
YOKE

Ash Pan Slide Dump YoK&

fr. r

4S200-2 Bend changed. Rate

Includes changing bend in ash pan slide dump yoke to fit rods.

Forge :

' 1-Per first yoke

2-Per yoke after first one

4S200-12 Lengthened or shortened. Rate

Includes lengthening or shortening ash pan slide dump yoke by drawing out
or upsetting same.

Forge :

1- Per first yoke

2- Per yoke after first one

4S200-13 Made. Rate

Includes getting material,. bending, dressing and finishing complete, ash pan
slide dump yoke.

Forge :

1- Per first yoke

2- Per yoke after first one

4S200-18 Straightened. Rate

Includes straightening old ash pan slide dump yoke when same has become
bent or twisted.

Forge :

1- Per first yoke

2- Per yoke after first one

4S200-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in ash pan slide dump yoke,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

ASH PAN

Dump, Slide — Yoke

ASH PAN AND GRATE RIGGING.

371

Dump, Slide
YOKE

4S200-21 Welded (crack). . Rate

Includes making dutchman, welding same in crack in ash pan slide dump
yoke, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S200-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan slide dump yoke,
dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

ASH PAN
Dump, Slide — Yoke

372

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

YOKE LUG

/js/i Pan 5//de Dump
YoH& Lug

4S210-13 Made. Rate

Includes getting material, forging, dressing and finishing complete, ash pan
slide dump yoke lug.

Forge :

1- Per first lug

2- Per lug after first one

4S210-18 Straightened. Rate

Includes straightening old ash pan slide dump yoke lug when same has be-
come bent or twisted.

Forge :

1- Per first lug

2- Per lug after first one

4S210-21 Welded (crack). r Rate.....

Includes making dutchman, welding same in crack in ash pan slide dump
yoke lug, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S210-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan slide dump yoke lug,
dressing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

ASH PAN

Dump, Slide — Yoke Lug

ASH PAN AND GRATE RIGGING.

373

Dump, Slide

YOKE, ROD PULL

/^5/? Pan 5Ude Dump YoKe PuU Rod

4S216-4 Cut — Iron, and ground.

Rate.

Includes cutting iron for slide dump ash pan yoke pull rod at power shears,
and grinding ends of rod at emery wheel. \

Power shears and emery wheel :

1- Per first rod

2- Per rod after first one

Includes straightening old slide dump ash pan yoke pull rod when same
has become bent.

Forge :

1- Per first rod

2- Per rod after first one

4S216-18 Straightened.

Rate.

ASH PAN

Dump, Slide — Yoke Pull Rod

374

BLACKSMITH SHOP SCHEDULES.

Dump, Slide

YOKE— ROD, PULL— END, LOOSE JAW

Ash Pan 5/ic/e Dump
YoKe PuJ/ F?od Jody

4S220-13 Made. Rate

Includes getting material, forging, dressing and finishing complete, ash pan
slide dump yoke pull rod loose jaw end.

Forge :

1- Per first jaw

2- Per jaw after first one

4S220-18 Straightened. Rate...

Includes straightening old ash pan slide dump yoke pull rod loose jaw end
when same has become bent or twisted.

Forge ;

1- Per first jaw

2- Per jaw after first one

ASH PAN

Dump, Slide — Yoke Pull Rod — Loose Jaw End

ASH PAN AND GRATE RIGGING.

375

SUPPORT

/Is/? Pan Supports

/ 2

/? 5/7 Pan Supports

3

4S250-2

Includes changing bend in ash pan support.

Forge.

Per first bend changed :

1- As per sketch No. 2

2- As per sketch No. 3

3- As per sketch No. 4

Per bend changed after first one :

7- As per sketch No. 2 -

8- As per sketch No. 3

9- As per sketch No. 4

4S250-4 Cut — Iron, and ground. Rate

Includes cutting iron at power shears and grinding ends of iron at emery
wheel for ash pan support.

Power shears and emery wheel.

Per first support :

1- As per sketch No. 1 .

Per support after first one :

2- As per sketch No. 1 .

0

11 /

Bend changed.

ASH PAN

Support

376

BLACKSMITH- SHOP SCHEDULES.

SUPPORT *

4S260-13 Made. Rate

Includes getting material, bending, dressing and finishing ash pan support
complete.

Forge.

Per first support :

1- As per sketch No. 2

2- As per sketch No. 3

3- As per sketch No. 4

Per support after first one :

7- As per sketch No. 2

8- As per sketch No. 3

9- As per sketch No. 4

4S250-18 Straightened. Rate...

Includes straightening old ash pan support when same has become bent or
twisted.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2 ,.

3- As per sketch No. 3

4- As per sketch No. 4

Per support after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

4S250-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in ash pan support, dressing
and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 2

2- As per sketch No. 4

Per place repaired after first one :

5- As per sketch No. 2

6- As per sketch No. 4

ASH PAN
Support

ASH PAN AND GRATE RIGGING.

377

SUPPORT

4S250-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in ash pan support, dress-
ing and finishing over weld complete.

Forge.

Per first place repaired :

10- As per sketch No. 3

11- As per sketch No. 4

Per place repaired after first one :

15- As per sketch No. 3

16- As per sketch No. 4

4S250-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in ash pan' support, dressing and
finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3 . . •.

23- As per sketch No. 4

Per hole after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

33- As per sketch No. 4

ASH PAN

Support

378

BLACKSMITH SHOP SCHEDULES.

ASH PAN AND GRATE RIGGING.

379

Burner, Oil

PIPE CLAMP

0// Burner OH Pipe C/amp

4S300-13 Made. Rate

Includes getting material, bending, dressing and finishing oil burner pipe
clamp complete.

Forge :

1- Per first clamp

2- Per clamp after first one

4S300-18 Straightened. Rate

Includes straightening old oil burner pipe clamp when same has become
bent.

Forge :

1- Per first clamp . . . . -

2- Per clamp after first one

DRAFT PAN
Burner, Oil — Pipe Clamp

380

BLACKSMITH SHOP SCHEDULES.

Damper

HANDLE, REGULATING— BRACKET

Draft Pan Damper Regulating Handle Bracket

4S320-2 Bend changed. Rate

Includes changing bend in draft pan damper regulating handle bracket.
Forge :

1- Per first bend changed -

2- Per bend changed after first one

4S320-12 Lengthened or shortened. Rate

Includes lengthening or shortening draft pan damper regulating handle
bracket by drawing out or upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4S320-13 Made. ' Rate

Includes getting material, bending, dressing and finishing draft pan damper
regulating handle bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4S320-18 Straightened. Rate

Inqludes straightening old draft pan damper regulating handle bracket when
same has become bent.

Forge :

1- Per first place repaired

2- Per place repaired after first one

DRAFT PAN

Damper Regulating Handle Bracket

ASH PAN AND GRATE RIGGING.

381

Damper

HANDLE, REGULATING— BRACKET

4S320-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in draft pan damper regu-
lating handle bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired ,

2- Per place repaired after first one

4S320-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in draft pan damper regulating
handle bracket, dressing and finishing over weld complete.

Forge :

7- Per first hole

8- Per hole after first one

DRAFT PAN

Damper Regulating Handle Bracket

382

BLACKSMITH SHOP SCHEDULES.

Damper

LEVER, REGULATING

Pmft Fan Hamper Fegu/ating Lever

4S326-13 Made. Rate

Includes getting material, forging, doing necessary welding, bending, dress-^
ing and finishing draft pan damper regulating lever complete.

Forge :

1- Per first lever -

2- Per lever after first one

4S326-18 Straightened. Rate

Includes straightening old draft pan damper regulating lever when same has
become bent.

Forge :

1- Per first lever

2- Per lever after first one

4S326-21 Welded (holes plugged). Rate.

Includes making plug, welding same in hole in draft pan damper regulating
lever, dressing and finishing over weld complete.

Forge :

1- Per first hole -

2- Per hole after first one

4S326-21 Welded (new end) (making included). Rate

Includes getting material, making either end of draft pan damper regulating
lever, welding end on lever, dressing and finishing over weld complete.

Forge :

7- Per first end :

8- Per end after first one

DRAFT PAN

Damper Regulating Lever

ASH PAN AND GRATE RIGGING.

383

Damper

LEVER, REGULATING— QUADRANT

jjroft Pan jumper

4S330-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, draft
pan damper regulating lever quadrant.

Forge :

1- Per first quadrant

2- Per quadrant after first one

4S330-18 Straightened. Rate

Includes straightening old draft pan damper regulating lever quadrant
when same has become bent.

Forge :

1- Per first quadrant — .

2- Per quadrant after first one

4S330-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in draft pan damper regulating
lever quadrant, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

DRAFT PAN

Damper Regulating Lever Quadrant

384

BLACKSMITH SHOP SCHEDULES.

Damper

ROD, CONNECTING

M/vft Tbn ]?orr?per and Od degu/at/r?g t^a//e Connecting T^od

4S350-12 Lengthened (by welding). Rate

Includes cutting draft pan damper connecting rod, doing necessary scarfing,
welding in required new stock, dressing and finishing rod to new length com-
plete.

Forge :

1- Per first rod

2- Per rod after first one

4S350-12 Lengthened or shortened. Rate...

Includes lengthening or shortening draft pan damper connecting rod by draw-
ing out or upsetting same.

Forge : •

7- Per first rod

8- Per rod after first one

4S350-13 Made. Rate

Includes getting material, blocking out, forging and dressing jaw ends,
doing necessary welding and finishing complete, draft pan damper connecting
rod.

Forge :

1- Per first rod

2- Per rod after first one

4S350-18 Straightened. Rate.....

Includes straightening old draft pan damper connecting rod when same has
become bent.

Forge :

1- Per first rod

2- Per rod after first one

4S350-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in draft pan damper con-
necting rod, dressing and finishing over weld complete.

Forge :

1- Per place first repaired

2- Per place repaired after first one

DRAFT PAN

Damper, Connecting Rod

ASH PAN AND GRATE RIGGING.

385

Damper

ROD, CONNECTING

4S350-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in draft pan damper con-
necting rod, dressing and finishing over weld complete.

Forge :

7- Per first place repaired —

8- Per place repaired after first one

4S350-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in draft pan damper connecting
rod, dressing and finishing over weld complete.

Forge :

13- Per first hole in jaw end

14- Per hole after first one in jaw end

4S350-21 Welded (new jaw end) (making included). Rate

Includes getting material, blocking out new jaw end for draft pan damper
connecting rod, welding jaw end on body of old rod, dressing and finishing
complete.

Forge :

19- Per first jaw end

20- Per jaw end after first one

DRAFT PAN
Damper, Connecting Rod

386

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT, BACK REGULATING

Braft Pan JJamper Back Pegu/at/ng 6/iaft

4S356-4 Cut — Iron. Rate

Includes cutting iron at power shears or forge for draft pan damper back
regulating shaft.

Power shears :

1-Per piece cut • *.

Forge :

3-Per piece cut

4S356-18 Straightened. Rate

Includes straightening old draft pan damper back regulating shaft when
same has become bent.

Forge :

1-Per shaft

DRAFT PAN

Damper Back, Regulating Shaft

ASH PAN AND GRATE RIGGING.

387

Damper

SHAFT, BACK REGULATING- ARM

Jraft Pan Damper BacH Regulating Shaft Arm

4S358-13 Made. Rate

Includes getting material, blocking out, forging, bending, dressing^and finish-
ing draft pan damper back regulating shaft arm complete.

Forge :

1- Per first arm

2- Per arm after first one.

4S358-18 Straightened. Rate

Includes straightening old draft pan back regulating shaft arm when same
has become bent.

Forge :

1- Per first arm

2- Per arm after first one

4S358-21 Welded (crack.) Rate

Includes making dutchman, welding same in crack in draft pan back regulat-
ing shaft arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S358-21 Welded (holes plugged.) Rate

Includes making plug, welding same in hole in draft pan back regulating
shaft arm, dressing and finishing over weld complete.

Forge.

Per first hole :

7- In boss end

8- In small end • '

Per hole after first one :

13- In boss end

14- In small end *

4S368-21 Welded (new jaw end) (making included). Rate

Includes getting material, welding same on end on draft pan damper back
regulating shaft arm, bending, dressing and finishing arm to shape complete.
Forge :

19- Per first end

20- Per end after first one

DRAFT PAN

Damper Back, Regulating Shaft Arm

388

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT, VERTICAL

Draft Pan Damper Vertical Operating Shaft

4S366-18 Straightened. Rate

Includes straightening old draft pan damper vertical shaft when same has
become bent.

Forge :

1-Per shaft

DRAFT PAN

Damper Vertical Shaft

ASH PAN AND GRATE RIGGING.

389

Damper

SHAFT, VERTICAL— BRACKET

Pan JJamperond
OH Pegu/ot/ng Po//e
Vertical Shaft BracHet

9

4S370-2 Bend changed. Rate

Includes changing bend in draft pan damper vertical shaft bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one .

4S370-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, draft
pan damper vertical shaft bracket.

Forge :

1- Per first bracket

2- Per bracket after first one

4S370-18 Straightened. Rate

Includes straightening old draft pan damper vertical shaft bracket when
same has become bent.

Forge :

1- Per first bracket

2- Per bracket after first one

4S370-21 Welded (holes plugged). Rate

Includes making plug, welding same in 'hole in draft pan damper vertical
shaft bracket, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

DRAFT PAN

Damper Vertical Shaft — Bracket

390

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT, VERTICAL— BRACKET, STEP

Draft Ban Damper and
OH Eegu/atmg KaJ/e /erticol\
Shaft Step Bracket

p

4S374-2 Bend changed. Rato

Includes changing bend in draft pan damper vertical shaft step bracket.
Forge :

1- Per first bend changed

2- Per bend changed after first one

4S374-13 Made. Rato_

Includes getting material, bending, dressing and finishing draft pan damper
vertical shaft step bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4S374-18 Straightened. Rate

' Includes straightening old draft pan damper vertical shaft step bracket when

same has become bent.

Forge :

1- Per first bracket

2- Per bracket after first one

DRAFT PAN

Damper Vertical Shaft — Step Bracket

ASH PAN AND GRATE RIGGING.

391

Damper

SHAFT, VERTICAL— BRACKET, “U”

Draft Pan Damper a net
Oil Hegu/at/ng,^ Va/ye
Vertical ShaftV BracHet

4S378-2 Bend changed. Rate

Includes changing bend in draft pan damper vertical shaft “U’’ bracket.
Forge :

1- Per first bend changed ’

2- Per bend changed after first one

4S378-13 Made. Rate

Includes getting material, bending, dressing and finishing draft pan damper
vertical shaft “U” bracket complete.

Forge :

1- Per first bracket —

2- Per bracket after first one

4S378-18 Straightened. Rate

Includes straightening old draft pan damper vertical shaft “U’’ bracket
when same has become bent.

Forge :

1- Per first bracket

2- Per bracket after first one

4S378-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in draft pan damper vertical
shaft “U"’ bracket, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

DRAFT PAN

Damper Vertical Shaft — “U” Bracket

392

BLACKSMITH SHOP SCHEDULES.

Damper

SHAFT, VERTICAL— LEVER, CONNECTION

J?raft Pan Damper and
OH Pegutating Ealre Eertical
Shaft Connection Lever

4S386-12 Lengthened or shortened. Rate

Includes lengthening or shortening draft pan damper vertical shaft con-
nection lever by drawing out or upsetting same.

Forge :

1- Per first lever

2- Per lever after first one

4S386-13 Made. Rate

Includes getting material, blocking out, forging, dressing and finishing draft
pan damper vertical shaft connection lever complete.

Forge :

1- Per first lever

2- Per lever after first one

4S386-18 Straightened. Rate...

Includes straightening old draft pan damper vertical shaft connection lever
when same has become bent.

Forge :

1- Per first lever

2- Per lever after first one

4S386-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in draft pan damper vertical
shaft connection lever, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S386-21 Welded (crack). Rate -

• Includes making dutchman, welding same in crack in draft pan damper
vertical shaft connection lever, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

DRAFT PAN

Damper Vertical Shaft Connection Lever

ASH PAN AND GRATE RIGGING.

393

Damper

SHAFT, VERTICAL— LEVER, CONNECTION

4S386-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in draft pan damper vertical
shaft connection lever, dressing and finishing over weld complete.

Forge.

Per first hole :

13- In boss end

14- In small end

Per hole after first one :

18- In boss end

19- In small end

4S386-21 Welded (new end). Rate

Includes getting material and welding new end on draft pan damper vertical
shaft connection lever, dressing and finishing end complete.

Forge :

24- Per first end

25- Per end after first one

DRAFT PAN

Damper Vertical Shaft Connection Lever

394

BLACKSMITH SHOP SCHEDULES.

Heater, Oil
CLAMP

Includes lengthening or shortening halves of oil heater clamp by drawing out
or upsetting same.

Forge :

1- Per first half

2- Per half after first one

4S400-13 Made. Rate

Includes getting material, bending, dressing and finishing halves of oil heater
clamp complete.

Forge.

Per first half :

1- Top half

2- Bottom half : ; .

Per half after first one :

7- Top half

8- Bottom half ..

4S400-18 Straightened. Rate

Includes straightening halves of old oil heater clamp when same has become
bent.

Forge.

Per first half ;

1- Top half

2- Bottom half

Per half after first one :

7- Top half

8- Bottom half

DRAFT PAN

Heater, Oil — Clamp

ASH PAN AND GRATE RIGGING.

395

Heater, Oil
CLAMP

4S400-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in oil heater clamp, dressing
and finishing over weld coniplete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S400-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in oil heater clamp, dress-
ing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4S400-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil heater clamp, dressing and
finishing over weld complete.

Forge :

13- Per first hole

14- Per hole after first one

DRAFT PAN
Heater, Oil — Clamp

396

BLACKSMITH SHOP SCHEDULES.

Valve, Oil Cut-out
CRANK, BELL

OH Cutout ^Qlve
Bell GranH

4S460-12 Lengthened or shortened. Rate

Includes lengthening or shortening oil cut-out valve bell crank by drawing
out or upsetting same.

Forge :

1- Per first arm

2- Per arm after first one

4S450-13 Made. Rate

Includes getting material, bending, doing necessary welding, dressing and
finishing oil cut-out valve bell crank complete.

Forge :

1- Per first crank

2- Per crank after first one

4S450-18 Straightened. Rate

Includes straightening old oil cut-out valve bell crank when same has become
bent.

Forge :

1-Per first place straightened

. 2-Per place straightened after first one

4S460-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil cut-out valve bell crank,
dressing and finishing over weld complete.

Forge : .

1- Per first hole

2- Per hole after first one

DRAFT PAN

Valve, Oil Cut-out — Bell Crank

ASH PAN AND GRATE RIGGING.

397

Valve, Oil Cut-out
CRANK, BELL

4S460-21 Welded (new end) (making included). Rate

Includes getting material, welding new end on oil cut-out valve bell crank,
dressing aYid finishing to shape complete.

Forge :

7- Per first end

8- Per end after first one

DRAFT PAN

Valve, Oil Cut-out — Bell Crank

398

BLACKSMITH SHOP SCHEDULES.

Valve, Oil-Regulating

ROD, CONNECTING

Mvf/’ Rin Damper and 0// 7fegu/at/ng Ka/re Conaecting^d

G

4S460-12 Lengthened (by welding).

Rate..

Includes cutting oil-regulating valve connecting rod, doing necessary scarf-
ing, welding in required new stock, dressing and finishing rod to new length
complete.

Forge :

1- Per first rod \

2- Per rod after first one

4S460-12 Lengthened or shortened. Rate

Includes lengthening or shortening oil-regulating valve connecting rod by
drawing out or upsetting same.

Forge :

7- Per first rod

8- Per rod after first one

4S460-13 Made. Rate

Includes getting material', blocking out, forging and dressing jaw ends, doing
necessary welding and finishing oil-regulating valve connecting rod complete.

Forge :

1- Per first rod

2- Per rod after first one

4S460-18 Straightened. Rate

Includes straightening old oil-regulating valve connecting rod when same
has become bent.

Forge :

1- Per first rod

2- Per rod after first one

4S460-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in oil-regulating valve con-
necting rod, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

DRAFT PAN

Valve, Oil-Regulating — Connecting Rod

ASH PAN AND GRATE RIGGING.

399

Valve, Oil-Regulating

ROD, CONNECTING

4S460-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in oil-regulating valve
connecting rod, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4S460-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil-regulating valve connecting
rod, dressing and finishing over weld complete.

Forge :

13- Per first hole in jaw end

14- Per hole after first one in jaw end

4S460-21 Welded (new jaw end) (making included). Rate

Includes getting material, blocking out new jaw end for oil-regulating valve
connecting rod, welding jaw end on body of old rod, dressing and finishing
complete.

Forge :

19-Per first jaw end

2Q-Per jaw end after first one

DRAFT PAN

Valve, Oil-Regulating — Connecting Rod

400

BLACKSMITH SHOP SCHEDULES.

Valve, Oil-Regulating

SHAFT, VERTICAL

Oil Regulating Value Vertical Operating Shaft

4S468-12 Lengthened or shortened. Rate

Includes lengthening or shortening oil-regulating valve vertical shaft by
drawing out or upsetting same.

Forge :

1- Per first shaft

2- Per shaft after first one

4S468-13 Made (from bar iron). Rate

Includes getting bar iron, squaring up one end and dressing and finishing to
form oil-regulating valve vertical shaft complete.

Forge :

1- Per first shaft

2- Per shaft after first one

4S468-18 Straightened. Rate

Includes straightening old oil-regulating valve vertical shaft when same has
become bent.

Forge :

1- Per first shaft

2- Per shaft after first one

4S468-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in oil-regulating valve
vertical shaft, dressing and finishing over weld complete.

Forge :

1- Per first place repaired ’

2- Per place repaired after first one

4S468-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in oil-regulating valve
vertical shaft, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

DRAFT PAN

Valve, Oil-Regulating — Vertical Shaft

ASH PAN AND GRATE RIGGING.

401

Valve, Oil-Regulating

SHAFT, VERTICAL

4S468-21 Welded (new end). Rate

Includes getting necessary material, welding same on body of old oil-regulat-
ing valve vertical shaft, dressing and finishing to form new end complete.

Forge :

13- Per first end

14- Per end after first one.

DRAFT PAN

Valve, Oil-Regulating — Vertical Shaft

402

BLACKSMITH SHOP SCHEDULES.

Valve, Oil-Regulating

SHAFT, VERTICAL— BRACKET

OH Fegu/afinq Kalpe
Vertical Shaft Brcichet

4S472-2 Bend changed. Rate

Includes changing bend in oil-regulating valve vertical shaft bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S472-13 Made. Rate

Includes getting material, bending, dressing, and finishing oil-regulating
valve vertical shaft bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4S472-18 Straightened. Rate

Includes straightening old oil-regulating valve vertical shaft bracket when
same has become bent.

Forge :

1- Per first bracket

2- Per bracket after first one

4S472-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil-regulating valve vertical
shaft bracket, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

DRAFT PAN

Valve, Oil-Regulating — Vertical Shaft Bracket

ASH PAN AND GRATE RIGGING.

403

Valve, Oil-Regulating

SHAFT, VERTICAL— BRACKET, STEP

Oil BeQu/at/ng /a//e
Pert! CO I Shaft Step BrocHet

4S476-13 Made. Rate

Includes getting material, blocking out, forging, dressing and finishing oil-
regulating valve vertical shaft step bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one

4S476-18 Straightened. Rate

Includes straightening old oil-regulating valve vertical shaft step bracket
when same has become bent.

Forge :

1- Per first bracket

2- Per bracket after first one

4S476-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in oil-regulating valve
vertical shaft step bracket, dressing and finishing over weld complete.
Forge :

1- Per first place repaired

2- Per place repaired after first one

4S476-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil-regulating valve vertical
shaft step bracket, dressing and finishing over weld complete.

Forge.

Per first hole :

7- In boss end

8- In flat end ’

Per hole after first one :

12- In boss end

13- In flat end

DRAFT PAN

Valve, Oil-Regulating— Vertical Shaft Step— Bracket

404

BLACKSMITH SHOP SCHEDULES.

Valve, Oil-Regulating

SHAFT, VERTICAL— BRACKET, STEP

4S476-21 Welded (new flat end) (making included). Rate

Includes getting material, welding same on body of oil-regulating valve
vertical shaft step bracket to form new flat end, dressing and finishing com-
plete.

Forge :

18- Per first end

19- Per end after first one

DRAFT PAN

Valve, Oil-Regulating — Vertical Shaft Step — Bracket

ASH PAN AND GRATE RIGGING.

405

Valve, Oil-Regulating

SHAFT, VERTICAL— BRACKET, “U”

Draft Pan Damper and
Oil Reau/aT/ng, Pa I re
Vertical Shatt'V Bramt

4S484-2 Bend changed. Rate

Includes changing bend in oil-regulating valve vertical shaft “U” bracket.
Forge :

1- Per first bend changed

2- Per bend changed after first one

4S484-13 Made. Rate

Includes getting material, bending, dressing and finishing oil-regulating
valve vertical shaft “U” bracket.

Forge :

1- Per first bracket

2- Per bracket after first one

4S484-18 Straightened. Rate

Includes straightening old oil-regulating valve vertical shaft bracket

■^hen same has become bent.

Forge :

1- Per first bracket

2- Per bracket after first one

4S484-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil-regulating valve vertical
shaft “U” bracket, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

DRAFT PAN

Valve, Oil-Regulating — Vertical Shaft “U” Bracket

406

BLACKSMITH SHOP SCHEDULES.

Valve, Oil-Regulating

SHAFT, VERTICAL— LEVER, CONNECTION

Mri7fr Pan Pamper and
on Pegulatmg Valre yerticol
Shaft Connection Lever

4S490-12 Lengthened or shortened. Rate

Includes lengthening or shortening oil-regulating valve vertical shaft con-
nection lever by drawing out or upsetting same.

Forge :

1- Per first lever

2- Per lever after first one

4S490-13 Made. Rate

Includes getting material, blocking out, forging, dressing and finishing oil-
regulating valve vertical shaft connection lever complete.

Forge :

1- Per first lever J

2- Per lever after first one

4S490-18 Straightened. Rate

Includes straightening old oil-regulating valve vertical shaft connection
lever when same has become bent.

Forge :

1- Per first lever

2- Per lever after first one

4S490-21 Welded (break). Rats

Includes doing necessary scarfing, welding break in oil-regulating valve
vertical shaft connection lever, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S490-21 Welded (crack). Rate.

Includes making dutchman, welding same in crack in oil-regulating valve
vertical shaft connection lever, dressing and finishing over weld complete.

Forge :

7- Per first place repaired —

8- Per place repaired after first one

DRAFT PAN

Valve, Oil-Regulating — Vertical Shaft Connection Lever

ASH PAN AND GRATE RIGGING.

407

Valve, Oil-Regulating

SHAFT, VERTICAL— LEVER, CONNECTION

4S490-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in oil-regulating valve vertical
shaft connection lever, dressing and finishing over weld complete.

Forge.

Per first hole :

13- In boss end

14- In small end

Per hole after first one :

18- In boss end

19- In small end :

4S490-21 Welded new end. Rate

Includes getting material and welding new end on oil-regulating valve
vertical shaft connection lever, dressing and finishing end complete.

Forge :

24- Per first end

25- Per end after first one ‘

DRAFT PAN

Valve, Oil-Regulating— Vertical Shaft Connection Lever

408

BLACKSMITH SHOP SCHEDULES.

Valve, Oil-Regulating
STEM

Of! Pegu /an ng
Pa/ve Stem

l1

4S494-6 Dressed. Rate-

Includes squaring up and dressing socket in old oil-regulating valve stem.
Forge :

1- Per first stem

2- Per stem after first one

4S494-13 Made complete. Rate

Includes getting material, forging, dressing and finishing oil-regulating
valve stem complete.

Forge :

1- Per first stem .•

2- Per stem after first one

4S494-18 Straightened. Rate

Includes straightening old oil-regulating valve stem when same has become
bent.

Forge :

1- Per first stem

2- Per stem after first one

4S494-21 Welded (new end on old stem). Rate

Includes getting material, welding same on end of old oil-regulating valve
stem, dressing and finishing stem to shape complete.

Forge :

1- Per first end

2- Per end after first one.

DRAFT PAN

Valve, Oil-Regulating — Stem

Grates and Grate Rigging — General Arrangement

ASH PAN AND GRATE RIGGING.

409

GRATE RIGGING

410

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

LEVER, OPERATING

Dump Grate

Operating Levers

4S600-2 Bend changed.

Rate

Includes changing bend in dump grate operating lever.

Forge.

1-Per first bend changed, all sketches

8-Per bend changed after first one, all sketches

4S600-3 Closed — Hole. Rate

Includes closing hole in boss end of dump grate operating lever.
Forge.

Per first hole closed :

1-As per sketch No. 5

Per hole closed after first one :

5-As per sketch No. 5

GRATE RIGGING

Grate, Dump — Operating Lever

ASH PAN AND GRATE RIGGING.

411

Grate, Dump

LEVER, OPERATING

4S600-6 Dressed. Rate

Includes cutting jaw, bending lip, doing necessary bending, dressing and
finishing complete, dump grate operating lever.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per lever after first one :

9-As per sketch No. 1

10- As per sketch No. 2

11- As per sketch No. 3

12- As per sketch No. 4

13- As per sketch No. 5

4S500-9 Forged. Rate

Includes getting material, blocking out and forging dump grate operating
lever complete, ready for dressing.

Steam hammer.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per lever after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

Forge.

Per first lever :

17- As per sketch No. 1 ;

18- As per sketch No. 2

19- As per sketch No. 3

20- As per sketch No. 4

21- As per sketch No. 5

Per lever after first one :

26- As per sketch No. 1

27- As per sketch No. 2

28- As per sketch No. 3

29- As per sketch No. 4

30- As per sketch No. 5 ^

GRATE RIGGING
Grate, Dump — Operating Lever

412

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

LEVER, OPERATING

4S500-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, bending,
dressing and finishing complete, dump grate operating lever.

Forge.

Per first lever :

40- As per sketch No. 1

41- As per sketch No. 2

42- As per sketch No. 3

43- As per sketch No. 4

44- As per sketch No. 5

Per lever after first one :

50- As per sketch No. 1

51- As per sketch No. 2

52- As per sketch No. 3

53- As per sketch No. 4

54- As per sketch No. 5

4S500-12 Lengthened or shortened. Rate

Includes lengthening or shortening dump grate operating lever by drawing
out or upsetting same.

Forge.

Per first lever ;

1- As per sketch No. 1 -

2- As per sketch No. 2 .

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per lever after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

4S500-18 Straightened. Rate

Includes straightening old dump grate operating lever when same has be-
come bent.

Forge.

Per first lever :

1- As per sketch No. 1 -

2- As per sketch No. 2 — -

3- As per sketch No. 3 -

4- As per sketch No. 4

5- As per sketch No. 5

GRATE RIGGING

Grate, Dump — Operating Lever

ASH PAN AND GRATE RIGGING.

413

Grate, Dump

LEVER, OPERATING

Per lever after first one :

8- As per sketch No. 1

9- As per sketch No, 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

4S500-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in dump grate operating
lever, dressing and finistiing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

Per place repaired after first one :

8- As per sketch No. 1

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 5

4S500-21 Welded (crack). Rate. ..

Includes making dutchman, welding same in crack in dump grate operating
lever, dressing and finishing over weld complete.

Forge.

Per first place repaired :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 3

21- As per sketch No. 4

22- As per sketch No. 5

Per place repaired after first one :

26- As per sketch No.l

27- As per sketch No. 2

28- As per sketch No. 3

29- As per sketch No. 4

30- As per sketch No. 5

GRATE RIGGING
Grate, Dump — Operating Lever

414

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

LEVER, OPERATING

4S500-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dump grate operating lever?
dressing and finisliing over weld complete.

Forge.

Per first hole.

In boss end :

35- As per sketch No. 1

36- As per sketch No. 2

37- As per sketch No. 3

38- As per sketch No. 4

39- As per sketch No. 5

In flat end :

45- As per sketch No. 1

46- As per sketch No. 2

47- As per sketch No. 3

48- As per sketch No. 4 ’ .-

49- As per sketch No. 5

In jaw end :

52-As per sketch No. 2

Per hole after first one.

In boss end :

54- As per sketch No. 1

55- As per sketch No. 2

56- As per sketch No. 3

57- As per sketch No. 4

58- As per sketch No. 5

In flat end :

62- As per sketch No. 1

63- As per sketch No. 2

64- As per sketch No. 3

65- As per sketch No. 4

, 66- As per sketch No. 5

In jaw end :

72- As per sketch No. 2

4S500-21 Welded (new lug). Rate

Includes getting necessary material for lug, welding same on dump grate
operating lever, dressing and finishing lug to shape complete.

Forge.

Per first lug :

80- As per sketch No. 2

81- As per sketch No. 3 -

Per lug after first one :

87- As per sketch No. 2

88- As per sketch No. 3

GRATE RIGGING

Great, Dump — Operating Lever

ASH PAN AND GRATE RIGGING.

415

Grate, Dump

LEVER, OPERATING

4S500-21 Welded (new flat end). Rate

Includes doing necessary scarfing, welding required stock on flat end of
dump grate operating lever, dressing and finishing to shape complete.

Forge :

92-Per first end, all sketches

100-Per end after first one, all sketches

4S600-21 Welded (new jaw end) (making included). Rate

Includes getting material, forging, dressing and finishing jaw end, doing
necessary scarfing, welding end on body of dump grate operating lever, dress-
ing and finishing end complete.

Forge.

Per first end :

107-As per sketch No. 2

Per end after first one :

IIQ-As per sketch No. 2

4S500-21 Welded (new boss end). Rate

Includes getting mateiial and forging boss end of dump grate operating lever,
doing necessary scarfing, welding boss end on body of lever, dressing and
finishing over weld complete.

Forge.

Per first end :

115-As per sketch No. 5

Per end after first one :

118-As per sketch No. 5

4S600-21 Welded (new bent end). Rate

Includes getting necessary material, making bends in bent end of dump
grate operating lever, welding bent end on body of lever, dressing and finish-
end to shape complete.

Forge.

Per first end :

125-As per sketch No. 5

Per end after first one :

128- As per sketch No.5

GRATE RIGGING
Grate, Dump — Operating Lever

416

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

LEVER, OPERATING— BAR, HANDLE

Includes changing dies in bulldozer and bending iron for socket end of dump
grate operating lever handle bar complete, after iron has been cut and de-
livered at bulldozer.

Bulldozer.

Per first end :

1-As per sketch No.l ? :

Per end after first one :

5-As per sketch No. 1

4S606-2 Bent (at bulldozer) (after handles have been forged down).

Rate

Includes changing dies in bulldozer and bending box end after same has
been welded on handle and handle forged down.

Bulldozer.

Per first bar :

8-As per sketch No. 1
Per bar after first one :
12-As per sketch No. 1

GRATE RIGGING

Grate, Dump — Operating Lever, Handle Bar

Ora re or rfoc/f/r?^ Orate Operar/m
le/er r/a/7C//e Bars (0/7a/fer Bars)

4S606-2 Bent (at bulldozer).

Rate

ASH PAN AND GRATE RIGGING.

417

Grate, Dump

LEVER, OPERATING— BAR, HANDLE
4S606-2 Bend changed. Rate..

Includes changing bend in dump grate operating lever handle bar.

Forge.

Per first bend changed :

15- As per sketch No. 1

16- As per sketch No. 2

Per bend changed after first one :

20- As per sketch No. 1

21- As per sketch No. 2

4S506-3 Closed — Hole. Rate.

Includes closing hole in boss or socket end of dump grate operating lever
handle bar.

Forge.

Per first hole closed :

1- In box end, sketch No. 1

2- In socket end,- sketch No. 2

Per hole after first one :

6- In box end, sketch No. 1

7- In socket end, sketch No. 2

4S506-4 Cut — Iron. Rate

Includes cutting iron at power shears for dump grat.e operating lever handle
bar.

Power shears.

Per piece cut :

1- Socket end •

2- Handle end

4S606-9 Forged (at machine). Rate.

Includes getting box end of dump grate operating lever handle bar after
same has been bent, getting handle after same has been cut, changing dies in
forming machine, and forming and welding box on handle complete.

Machine.

Per first bar :

1-As per sketch No.l

Per bar after first one :

5-As per sketch No.l

GRATE RIGGING

Grate, Dump — Operating Lever, Handle Bar

418

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

LEVER, OPERATING— BAR, HANDLE

4S606-9 Forged (forging handles down). Rate

Includes forging down handles of dump grate operating lever handle bar
after box end is welded on at machine.

Steam hammer.

Per first bar :

8-As per sketch No. 1

Per bar after first one :

12-As per sketch No. 1

4S606-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, welding, dressing and
finishing complete, dump grate operating lever handle bar.

Forge.

Per first bar :

15- As per sketch No. 2

Per bar after first one :

18- As per sketch No. 2 . . .

4S606-12 Lengthened or shortened. Rate

Includes lengthening or shortening dump grate operating lever handle bar by
drawing out or upsetting same.

Forge.

Per first bar :

1-As per sketch No. 1

Per bar after first one :

5- As per sketch No. 1

4S606-13 Made. Rate

Includes getting all material, bending, welding and dressing box end, doing
necessary scarfing, welding box end on handle of dump grate operating lever
handle bar, and dressing bar to shape complete.

Forge.

Per first bar :

1-As per sketch No. 1 : :

Per bar after first one :

5-As per sketch No. 1

GRATE RIGGING

Grate, Dump — Operating Lever, Handle Bar

ASH PAN AND GRATE RIGGING.

419

Grate, Dump

LEVER, OPERATING— BAR, HANDLE

4S606-18 Straightened. Rate

Includes straightening old dump grate operating lever handle bar when same
has become bent.

Forge.

Per first bar :

1- As per sketch No. 1

2- As per sketch No. 2

Per bar after first one

8- As per sketch No. 1

9- As per sketch No. 2

4S506-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in dump grate operating
lever handle bar, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per plq,ce repaired after first one :

8- As per sketch No. 1

9- As per sketch No. 2

4S606-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dump grate operating
lever handle bar, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12-As per sketch No. 1

Per place lepaired after first one :

15- As per sketch No. 1

GRATE RIGGING

Grate, Dump — Operating Lever, Handle Bar

420

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

LINK, CONNECTING

^^m/?OroteCo/7/?ect//?^l/n/(

4S610-4 Cut — Iron, and ground. Rate

Includes cutting iron at power shears for dump grate connecting link, and
grinding ends of same at emery wheel.

Power shears and emery wheel :

1-Per link

4S510-13 Made (from bar iron). . Rate

Includes getting bar iron, dressing ends, and finishing dump grate connecting
link complete.

Forge :

1-Per first link

3-Per link after first one

4S610-18 Straightened. Rate

Includes straightening old dump grate connecting link when same has be-
come bent.

' Forge :

1-Per first link

3-Per link after first one

4S610-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in dump grate connecting
link, dressing and finishing over weld complete.

Forge : .

1-Per first place repaired

5-Per place repaired after first one

4S610-21 Welded (crack). Rate ...

Includes making dutchman, welding same in crack in dump grate connecting
link, dressing and finishing over weld complete.

Forge :

8-Per first place repaired

1 1-Per place repaired after first one -

4S610-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dump grate connecting link,
dressing and finishing over weld complete.

Forge :

15-Per first hole plugged

18-Per hole plugged after first one

GRATE RIGGING

Grate, Dump — Connecting Link

ASH PAN AND GRATE RIGGING.

421

Grate, Dump

LUG, LOCKING

Includes changing bend in dump grate locking lug.

Forge :

1-Per first bend changed

• 2-Per bend changed after first one

4S514-12 Lengthened or shortened. Rate

Includes lengthening or shortening dump grate locking lug by drawing out or
upsetting same.

Forge :

1- Per first lug -

2- Per lug after first one :

4S514-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, dump
grate locking lug.

Forge :

1- Per first lug

2- Per lug after first one

4S614-18 Straightened. Rate

Includes straightening old dump grate locking lug when same has become
bent.

Forge :

1- Per first lug

2- Per lug after first one

4S614-.21 Welded (break). Rate:

Includes doing necessary scarfing, welding break in dump grate locking lug,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

GRATE RIGGING
Grate, Dump — Locking Lug

422

BLACKSMITH SHOP SCHEDULES'.

Grate, Dump

LUG, LOCKING

4S514-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dump grate locking lug,
dressing and finishing over weld complete.

Forge :

6- Per first place repaired

7- Per place repaired after first one

4S614-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dump grate locking lug, dress-
ing and finishing over weld complete.

Forge :

12- Per first hole

13- Per hole after first one -

♦

GRATE RIGGING

Grate, Dump — Locking Lug

ASH PAN AND GRATE RIGGING.

423

Grate, Dump
SHAFT

/7^//T7/?(9r(7/^eS//o//'

4S524-4 Cut — Iron, and ground. Rate..

Includes cutting iron at power shears for dump grate shaft, and grinding
ends of same at emery wheel.

Power shears and emery wheel :

1-Per shaft

4S524-12 Lengthened or shortened. Rate

Includes lengthening or shortening dump grate shaft by drawing out or
upsetting same.

Forge :

1- Per first shaft

2- Per shaft after first one

4S524-18 Straightened. Rate

Includes straightening old dump grate shaft when same has become bent.
Forge :

1- Per first shaft

2- Per shaft after first one -

4S524-21 Welded (break). Rate . ..

Includes doing necessary scarfing, welding break in dump grate shaft, dress-
ing and finishing over weld complete.

Forge :

1- Per first place repaired - -

2- Per place repaired after first one

4S624-21 Welded (crack). Rate...

Includes making dutchman, welding same in crack in dump grate shaft,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one -

GRATE RIGGING
Grate, Dump — Shaft

424

BLACKSMITH SHOP SCHEDULES.

Grate, Dump-

SHAFT ARM

Viy/Tpor/i'oc/ffnQOrote

4S526-2 Bend changed. , Rate

Includes changing bend in dump grate shaft arm.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S526-6 Dressed. Rate

Includes dressing and finishing complete, dump grate shaft arm after same
has been forged.

Forge :

1- Per first arm

2- Per shaft arm after first one

4S626-9 Forged. Rate

Includes getting material, blocking out and forging complete, ready for
dressing, dump grate shaft arm.

Steam hammer :

1- Per first arm

2- Per arm after first one

Forge :

3- Per first arm

4- Per arm after first one

4S626-9 Forged and dressed. . . Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, dump grate shaft arm.

Steam hammer :

8- Per first arm

9- Per arm after first one i

Forge :

1 2- Per first arm

13- Per arm after first one

GRATE RIGGING

Grate, Dump — Shaft Arm

ASH PAN AND GRATE RIGGING.

425

Grate, Dump

SHAFT ARM

4S626-12 Lengthened or shortened. Rate

Includes lengthening or shortening dump grate shaft arm by drawing out or
upsetting same.

Forge :

1- Per first arm — .

2- Per arm after first one

4S626-18 Straightened. Rate

Includes straightening old dump grate shaft arm when same has become
bent.

Forge :

1- Per first arm

2- Per arm after first one

4S526-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in dump grate shaft arm^
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S626-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dump grate shaft arm,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one '

4S526-21 Welded (holes plugged). Rate...:

Includes making plug, welding same in hole in dump grate shaft arm, dress-
ing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

GRATE RIGGING
Grate, Dump — Shaft Arm

426

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

SHAFT ARM CONNECTION

^^/77p&n7re:5/7a/t/Ir/r/Cor?nect/or75

>Jok'£/7(/ Joh^rncf

F/a£nc/

/.

W/?7pGrofe /Irm Co/?r?ecT/OA7S

'F7afF/7c/

(yotf'F/yd

4S530-2 Bend changed.

Rate.

Includes changing bend in dump grate shaft arm connection.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per bend changed after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

4S630-12 Lengthened or shortened. Rate

Includes lengthening or shortening dump grate shaft arm connection by
drawing out or upsetting same.

Forge.

Per first connection :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per connection after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10-As per sketch No. 4

GRATE RIGGING

Grate, Dump — Shaft Arm Connection

ASH PAN AND GRATE RIGGING.

427

Grate, Dump

SHAFT ARM CONNECTION

4S530-13 Made. Rate

Includes getting material, forging, doing necessary welding, cutting jaw ends,
bending, dressing and finishing complete, dump grate shaft arm connection.

Forge.

Per first connection :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 ^

4- As per sketch No. 4

Per connection after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10- As per sketch No. 4

4S530-18 Straightened. Rate

Includes straightening old grate dump shaft arm connection when same has
become bent.

Forge.

Per first connection :

1- As per sketch No. 1 T

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per connection after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10- As per sketch No. 4

4S530-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in dump grate shaft arm
connection, dressing and finishing over weld complete.

' Forge.

Per first place repaired ;

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10- As per sketch No. 4

GRATE RIGGING
Grate, Dump — Shaft Arm Connection

428

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

SHAFT ARM CONNECTION

4S530-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in dump grate shaft
arm connection, dressing and finishing over weld complete.

Forge.

Per first place repaired :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

Per place repaired after first one :

21- As per sketch No.l

22- As per sketch No. 2

23- As per sketch No. 3

24- As per sketch No. 4

4S530-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in dump grate shaft arm con-
nection, dressing and finishing over weld complete.

Forge.

Per first hole :

30- As per sketch No. 1, jaw end

31- As per sketch No. 2, jaw end

32- As per sketch No. 2, flat end

33- As per sketch No. 3, flat end

34- As per sketch No. 4, jaw end

Per hole after first one :

40- As per sketch No. 1, jaw end

41- As per sketch No. 2, jaw end

42- As per sketch No. 2, flat end

43- As per sketch No. 3, flat end

44- As per sketch No. 4, jaw end

4S530-21 Welded (new jaw end). Rate

Includes getting material, forging and dressing jaw end of dump grate shaft
arm connection, doing necessary scarfing, welding jaw end on body of con-
nection, dressing and finishing end to shape complete.

Forge.

Per first end :

50- As per sketch No. 1

51- As per sketch No. 2

52- As per sketch No. 4

Per end after first one :

56- As per sketch No. 1

57- As per sketch No. 2

58- As per sketch No. 4

GRATE RIGGING

Grate, Dump — Shaft Arm Connection

ASH PAN AND GRATE RIGGING.

429

Grate, Dump

SHAFT ARM CONNECTION

4S630-21 Welded (new flat end). Rate

Includes doing necessary scarfing, welding material on end of dump grate
shaft arm connection, dressing and finishing end to shape complete.

Forge.

Per first end :

61- As per sketch No, 2

62- As per sketch No. 3

63- As per sketch No. 4

Per end after first one :

67- As per sketch No. 2

68- As per sketch No. 3

69- As per sketch No. 4

GRATE RIGGING
Grate, Dump — Shaft Arm Connection

430

BLACKSMITH SHOP SCHEDULES.

Grate, Dump

SHAFT ARM CONNECTION— END, JAW

4S634-2 Bent. Rate

Includes changing dies in bulldozer and bending jaw end of dump grate
shaft arm connection after iron has been cut and delivered to bulldozer.

Forge :

1- Per first jaw bent !

2- Per jaw bent after first one

4S534-4 Cut — Iron. Rate

Includes cutting iron at power shears for dump grate shaft arm connection
jaw end.

Power shears :

1-Per piece cut

4S534-6 Dressed. Rate ...

Includes dressing and finishing complete jaw end of dump grate shaft arm
connection after jaw has been forged.

Forge.

Per first end :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 4

Per end after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 4

4S534-9 Forged. Rate

Includes getting iron after same has been bent and punched, changing dies
in forging machine and forging dump grate shaft arm connection jaw end
complete.

Forging machine.

Per first end :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per end after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

GRATE RIGGING

Grate, Dump — Shaft Arm Connection Jaw End

ASH PAN AND GRATE RIGGING.

431

Grate, Dump

SHAFT ARM CONNECTION— END, JAW

4S634-9 Forged (steam hammer). Rate

Includes getting material, blocking out and forging complete, ready for
dressing, dump grate shaft arm connection jaw end.

Steam hammer.

Per first jaw end :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 4

Per jaw end after first one :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 4

Forge.

Per first jaw end :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 4

Per jaw end after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 4

4S534-9 Forged and dressed. Rate..

Includes getting material, forging, cutting jaw, dressing and finishing com-
plete, dump grate shaft arm connection jaw end.

Forge.

Per first jaw end :

40- As per sketch No.l

41- As per sketch No. 2

42- As per sketch No. 4

Per jaw end after first one :

46- As per sketch No. 1

47- As per sketch No. 2

48- As per sketch No. 4

GRATE RIGGING

Grate, Dump — Shaft Arm Connection Jaw End

432

BLACKSMITH SHOP SCHEDULES.

Qrate, Rocking

BAR, CONNECTING

z^(iic/r//7^6^r(7reCo/7/7ecT//7^Sar

I ® ® ® <9

/

/?oclf//70 G/z/Ae Co/7/?ec///7f3(7r

/?ocIf//7^GroiteCor?nect/n^

4S660-2 Bend changed. Rate

Includes changing bend in rocking grate connecting bar.

Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bend changed after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4S660-4 Cut — Iron, and ground. Rate

Includes cutting iron at power shears for rocking grate connecting bar, and
grinding ends of same at emery wheel.

Power shears and emery wheel.

Per bar :

1-As per sketch No. 1

GRATE RIGGING

Grate, Rocking — Connecting Bar

ASH PAN AND GRATE RIGGING.

433

Grate, Rocking

BAR, CONNECTING

4S660-9 Forged and dressed. Rate

Includes getting material, forging, doing necessary scarfing, welding lug
on bar, dressing and finishing bar to shape complete.

Forge.

Per first bar :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bar after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S560-12 Lengthened or shortened. Rate.

Includes lengthening or shortening rocking grate connecting bar by drawing
out or upsetting same.

Forge.

Per first bar :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per bar after first one :

6- As per sketch No. 1

7- As per sketch No. 2

8- As per sketch No. 3

4S660-18 Straightened. Rate

Includes straightening old rocking grate connecting bar when same has be-
come bent or twisted.

Forge.

Per first bar :

1- As per sketch No. 1 '

2- As per sketch No. 2

3- As per sketch No. 3

Per bar after first one :

6- As per sketch No.l

7- As per sketch No. 2

8- As per sketch No. 3

GRATE RIGGING
Grate, Rocking — Connecting Bar

434

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

BAR, CONNECTING

4S560-21 Welded (break). » Rate

Includes doing necessary scarfing, welding break in rocking grate connect-
ing bar, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As’per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 *.

Per place repaired after first one ;

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

560-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate connect-
ing bar, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1 -

13- As per sketch No. 2

14- As per sketch No. 3 -

Per place repaired after first one :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 3 - ---

4S560-21 Welded (holes plugged). Rate

Includes making plug, wdding same in hole in rocking grate connecting bar,
dressing and finishing over weld complete.

Forge.

Per first hole :

25- As per sketch No.- 1 — -

26- As per sketch No. 2 -

27- As per sketch No. 3 —

Per hole after first one : i

29- As per sketch No. 1

30- As per sketch No. 2

31- As per sketch No. 3

GRATE RIGGING

Grate, Rocking — Connecting Bar

ASH PAN AND GRATE RIGGING.

435

Grate, Rocking

LEVER, CONNECTING

Rocking Grate Connecting Lever

4S570-2 Bend changed. Rate

Includes changing bend in rocking grate connecting lever.

Forge :

1-Per first bend changed

5-Per bend changed after first one ‘

4S570-6 Dressed. Rate

Includes dressing and finishing complete, rocking grate connecting lever.
Forge :

1-Per first lever

5-Per lever after first one

4S570-9 Forged. Rate

Includes getting material, blocking out and forging complete, ready for
dressing, rocking grate connecting lever.

Steam hammer :

1-Per first lever

3-Per lever after first one

Forge :

5-Per first lever _

7-Per lever after first one

GRATE RIGGING
Grate, Rocking — Connecting Lever

436

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

LEVER, CONNECTING

4S670-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, rocking grate connecting lever.

Steam hammer :

10- Per first lever

14- Per lever after first one

Forge :

18-Per first lever

22-Per lever after first one

4S570-18 Straightened. Rate

Includes straightening old rocking grate connecting lever when same has
become bent or twisted.

Forge :

1-Per first lever

5-Per lever after first one

4S570-21 Welded (break). Rate...

Includes doing necessary scarfing, welding break in rocking grate connecting
lever, dressing and finishing over weld complete.

Forge :

1-Per first place repaired

5-Per place repaired after first one

4S670-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate connect-
ing lever, dressing and finishing over weld complete.

Forge :

8-Per first place repaired

1 1- Per place repaired after first one

4S670-21 Welded (holes plugged). Rate. ..

includes making plug, welding same in hole in rocking grate connecting lever,
dressing and finishing over weld complete.

Forge.

Per first hole :

15- In center boss

16- In flat end

Per hole after first one :

20- In center boss

21- In flat end •-

GRATE RIGGING

Grate, Rocking — Connecting Lever

ASH PAN AND GRATE RIGGING.

437

Grate, Rocking

LEVER, OPERATING

/Toc/r/n^ G-ra/B 0/pen3f//7^leper5(&rare5/7a/fer/7r?^rs)

/.

4S576-2 Bend changed.

Rate.

Includes changing bend in rocking grate operating lever.
Forge.

Per first bend changed :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No.- 3

Per bend changed after first one :

7- As per sketch No. 1

8- As per sketch No. 2 . . ;

9- As per sketch No. 3

4S676-6 Dressed. Rate

Includes dressing, bending and finishing rocking grate operating lever com-
plete.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2 ,

3- As per sketch No. 3

Per lever after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

GRATE RIGGING
Grate, Rocking — Operating Lever

438

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking
' LEVER, OPERATING

4S576-9 Forged. Rate

Includes getting material, blocking out and forging rocking grate operating
lever complete, ready for dressing.

Steam hammer.

Per first lever : ,

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per lever after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

Forge.

Per first lever :

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

Per lever after first one :

17- As per sketch No. 1

18- As per sketch No. 2

19- As per sketch No. 3

4S676-9 Forged and dressed. Rate...

Includes getting material, blocking out, forging, dressing and finishing rock-
ing grate operating lever complete.

Steam hammer.

Per first lever :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

Per lever after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3 .. ..

Forge.

Per first lever ;

37- As per sketch No. 1

38- As per sketch No. 2

39- As per sketch No. 3

Per lever after first one :

45- As per sketch No. 1

46- As per sketch No. 2

47- As per sketch No. 3

GRATE RIGGING

Grate, Rocking — Operating Lever

ASH PAN AND GRATE RIGGING.

439

Grate, Rocking

LEVER, OPERATING

4S676-12 Lengthened or shortened. Rate

Includes lengthening or shortening rocking grate operating lever by drawing
out or upsetting same.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per lever after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S676-18 Straightened. Rate

Includes straightening old rocking grate operating lever when same has be-
come bent or twisted.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per lever after first one : '

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S676-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in rocking grate operating
lever, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

GRATE RIGGING
Grate, Rocking — Operating Lever

440

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

LEVER, OPERATING

4S676-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate operating
lever, dressing and finishing over weld complete.

Forge.

Per first place repaired :

13- As per sketch No. 1

14- As per sketch No. 2

15- As per sketch No. 3

Per place repaired after first one :

17- As per sketch No. 1

18- As per sketch No. 2

19- As per sketch No. 3

4S676-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in rocking grate operating lever,
dressing and finishing over weld complete.

Forge.

Per first hole plugged in boss end :

22- As per sketch No. 1

23- As per sketch No. 2

24- As per sketch No. 3

Per first hole plugged in flat end :

27- As per sketch No.l

28- As per sketch No. 2

29- As per sketch No. 3

Per hole plugged after first one in boss end :

35- As per sketch No.l

36- As per sketch No. 2

37- As per sketch No. 3

Per hole plugged after first one in flat end :

40- As per sketch No. 1

41- As per sketch No. 2

42- As per sketch No. 3

GRATE RIGGING

Grate, Rocking — Operating Lever

ASH PAN AND GRATE RIGGING.

441

Grate, Rocking

LEVER, OPERATING— BAR, HANDLE (SHAKER BAR)

/7///77/P (PraAe or/foc/f/rj^O/vteOpen?///?^
le/er A/a/7cf/e Bars (S7o/rer Bars)

4S680-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending iron for socket end of rock-
ing grate operating lever handle bar complete, after iron has been cut and
delivered to bulldozer.

Bulldozer.

Per first end :

1-As per sketch No. 1

Per end after first one :

3-As per sketch No.l

4S680-2 Bent (at bulldozer) (after handles have been forged down).

Rate

Includes changing dies in bulldozer and bending box end of rocking grate
operating lever handle bar after same has been welded on handle and handle
forged down.

Bulldozer.

Per first bar :

7- As per sketch No. 1

Per bar after first one :

9-As per sketch No. 1

GRATE RIGGING

Grate, Rocking — Operating Lever Handle Bar

442

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

LEVER, OPERATING— BAR, HANDLE (SHAKER BAR)
4S580-2 Bend changed. Rate

Includes changing bend in rocking grate operating lever handle bar.

Forge.

Per first bend changed :

12- As per sketch No. 1

13- As per sketch No. 2

Per bend changed after first one :

15- As per sketch No. 1

16- As per sketch No. 2

4S580-3 Closed — Hole. Rate

Includes closing hole in boss or socket end of rocking grate operating lever
handle bar.

Forge.

Per first hole closed :

1- As per sketch No. 1

2- As per sketch No. 2

Per hole closed after first one :

3- As per sketch No. 1

4- As per sketch No. 2

4S680-4 Cut — Iron. Rate

Includes cutting iron at power shears for rocking grate operating lever handle
bar.

Power shears.

Per piece cut :

1- Socket end

2- Handle end

4S580-9 Forged (at machine). Rate

Includes getting box end of rocking grate operating lever handle bar after
same has been bent, and getting handle after same has been cut, changing
dies in forming machine and forming and welding box on handle complete.

Machine.

Per first bar :

1-As per sketch No. 1

Per bar after first one :

5- As per sketch No. 1

GRATE RIGGING

Grate, Rocking — Operating Lever Handle Bar

ASH PAN AND GRATE RIGGING.

443

Grate, Rocking

LEVER, OPERATING— BAR, HANDLE (SHAKER BAR)

4S580-9 Forged (forging handles down). Rate._

Includes forging down handles of rocking grate operating lever handle bar
after box end is welded on at machine.

Steam hammer.

Per first bar :

8-As per sketch No. 1

Per bar after first one :

12-As per sketch No. 1 -

4S580-12 Lengthened or shortened. Rate

Includes lengthening or shortening rocking grate operating lever handle bar
by drawing out or upsetting same.

Forge.

Per first bar :

1- As per sketch No. 1

2- As per sketch No. 2

Per bar after first one :

5- As per sketch No. 1

6- As per sketch No. 2.

4S580-13 Made. Rate

Includes getting all material, bending, welding and dressing box end, doing
necessary scarfing, welding box end on handle of rocking grate operating
lever handle bar, and dressing bar to shape complete.

Forge.

Per first bar :

1- As per sketch No. 1

2- As per sketch No. 2

Per bar after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4S580-18 Straightened.

Rate

Includes straightening old rocking grate operating, lever handle bar when
same has become bent.

Forge.

Per first bar :

1- As per sketch No. 1

2- As per sketch No. 2

Per bar after first one :

5- As per sketch No. 1

6- As per sketch No. 2

GRATE RIGGING •

Grate, Rocking — Operating Lever Handle Bar

444

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

LEVER, OPERATING— BAR, HANDLE (SHAKER BAR)

4S580-21 Welded (break). Rate...

Includes doing necessary scarfing, welding break in rocking grate operating
lever handle bar, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1 . .

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4S580-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate operat-
ing lever handle bar, dressing and finishing over weld complete.

Forge.

Per first place repaired :

8- As per sketch No. 1

9- As per sketch No. 2 '

Per place repaired after first one : '

12- As per sketch No. 1

13- As per sketch No. 2

GRATE RIGGING

Grate, Rocking — Operating Lever Handle Bar

ASH PAN AND GRATE RIGGING.

445

Grate, Rocking

LEVER, OPERATING— ROD, CONNECTING

/?oc/r//7^(?r{7/eOpen7///7^ leper ConnectZ/yp/focf

4S586-2 Bend changed. Rate

Includes changing bend in rocking grate operating lever connecting rod.
Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3 '

4S686-6 Dressed (boss end). Rate

Includes flattening boss end of rocking grate operating lever connecting rod,
dressing and finislnng end to shape complete.

Forge.

Per first end :

1-As per sketch No. 2

Per end after first one :

5- As per sketch No. 2

GRATE RIGGING

Grate, Rocking — Operating Lever Connecting Rod

446

BLACKSMITH SHOP SCHEDULES.

Grate, Rigging

LEVER, OPERATING— ROD, CONNECTING

4S586-12 Lengthened or shortened. Rate

Includes lengthening or shortening rocking grate operating lever connect-
ing rod by drawing out or upsetting same.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2 ,

3- As per sketch No. 3

Per rod after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S686-13 Made. Rate ...

Includes getting all material, blocking out and forging jaw or boss ends of
rocking grate operating lever connecting rod, welding ends on body of rod,
dressing and finishing rod to shape complete.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 . . .

Per rod after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S686-18 Straightened. Rate

Includes straightening old rocking grate operating lever connecting rod when
same has become bent.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per rod after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

GRATE RIGGING

Grate, Rocking — Operating Lever Connecting Rod

ASH PAN AND GRATE RIGGING.

447

Grate, Rocking

LEVER, OPERATING— ROD, CONNECTING

4S686-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in rocking grate operating
lever connecting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4S586-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate operating
lever connecting rod, dressing and finishing over weld complete.

Forge.

Per first place repaired ;

12- As per sketch No. 1

13- As per sketch No. 2

14- As per sketch No. 3

Per place repaired after first one :

17- As per sketch No. 1

18- As per sketch No. 2

19- As per sketch No. 3

4S586-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in rocking grate operating lever
connecting rod, dressing and finishing over weld complete.

Forge.

Per first hole :

In jaw end : ,

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

In flat end :

30-As per sketch No. 1

Per hole after first one.

In jaw end :

33- As per sketch No.l

34r-As per sketch No. 2 ,

35- As per sketch No. 3

In flat end :

38- As per sketch No.l

GRATE RIGGING

Grate, Rocking — Operating Lever Connecting Rod

448

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

LEVER, OPERATING— ROD, CONNECTING

4S686-21 Welded (new jaw end) (making included). Rate

Includes getting material and forging complete, jaw end of rocking grate
operating lever connecting rod, doing necessary scarfing, welding jaw end
on body of rod, dressing and finishing end to shape complete.

Forge.

Per first end :

42- As per sketch No.l

43- As per sketch No. 2

44- As per sketch No. 3

Per end after first one :

47- As per sketch No. 1

48- As per sketch No. 2

49- As per sketch No. 3

4S586-21 Welded (new boss end) (making included). Rate

Includes getting material, welding necessary stock on boss end of rocking
grate operating lever connecting rod, dressing and finishing end to shape
complete.

Forge.

Per first end :

54-As per sketch No. 2

Per end after first one :

57-As per sketch No. 2

GRATE RIGGING

Grate, Rocking — Operating Lever Connecting Rod

ASH PAN AND GRATE RIGGING.

449

Grate, Rocking

LUG, LOCKING

Gn?feloc/o'n^LL/g

4S690-2 Bend changed. Rate

Includes changing bend in rocking grate locking lug.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S590-12 Lengthened or shortened. Rate

Includes lengthening or shortening rocking grate locking lug.

Forge :

1- Per first lug

2- Per lug after first one

4S690-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, rocking
grate locking lug.

Forge :

1- Per first lug

2- Per lug after first one

4S690-18 Straightened. Rate

Includes straightening old rocking grate locking lug when same has become
bent or twisted.

Forge :

1- Per first lug

2- Per lug after first one

4S590-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in rocking grate locking
lug, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one .^

GRATE RIGGING
Grate, Rocking — Locking Lug

450

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking

LUG, LOCKING

4S590-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate locking
lug, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S590-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in rocking grate locking lug,
dressing and finishing over weld complete.

Forge :

10- Per first hole

11- Per hole after first one

GRATE RIGGING

Grate, Rocking — Locking Lug

ASH PAN AND GRATE RIGGING.

451

Grate, Rocking
SHAFT

/rbc/fm^Grc/te 5/?a/r

4S594-4 Cut — Iron. Rate

Includes cutting iron at power shears for rocking grate shaft.

Power shears :

1-Per piece cut

4S594-18 Straightened. Rate

Includes straightening old rocking grate shaft when same has become bent
or twisted.

Forge :

1- Per first shaft

2- Per shaft after first one

4S594-21 Welded (break). * Rate

Includes doing necessary scarfing, welding break in rocking grate shaft,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S694-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate shaft,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired -

2- Per place repaired after first one

GRATE RIGGING
Grate, Rocking — Shaft

452

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking
SHAFT ARM

W/?;por/ji)cf(inQ Grate

4S696-2 Bend changed. Rate

Includes changing bend in rocking grate shaft arm.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4S696-6 Dressed. Rate

Includes dressing and finishing complete, rocking grate shaft arm.

Forge :

1- Per first arm ;

2- Per arm after first one

4S696-9 Forged. Rate

Includes getting material, blocking out and forging rocking grate shaft arm
complete, ready for dressing.

Steam hammer :

1- Per first arm

2- Per arm after first one

Forge :

3- Per first arm

4- Per arm after first one

4S696-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing rock-
ing grate shaft arm complete.

Steam hammer :

7- Per first arm —

8- Per arm after first one

Forge :

10- Per first arm

1 1- Per arm after first one

GRATE RIGGING

Grate, Rocking — Shaft Arm

ASH PAN AND GRATE RIGGING.

453

Grate, Rocking
SHAFT ARM

4S596-18 Straightened. Rate

Includes straightening old rocking grate shaft arm when same has become
bent or twisted.

Forge :

1- Per first arm

2- Per arm after first one

4S596-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in rocking grate shaft
arm, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4S596-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate shaft
arm, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4S596-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in rocking grate shaft arm,
dressing and finishing over weld complete.

Forge.

Per first hole :

10- In center boss

11- In flat end

Per hole after first one :

13- In center boss

14- In flat end

GRATE RIGGING
Grate, Rocking — Shaft Arm

454

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking
SHAFT BOX

/?oc/r/r?(7 Gn7/e S/?o/ A 3oxe5

4S598-2 Dressed. Rate.

Includes dressing and finishing rocking grate shaft box complete.

Forge.

Per first box :

1- As per sketch No. 1

2- As per sketch No. 2

Per box after first one :

5- As per sketch No.l

6- As per sketch No. 2

4S598-9 Forged. Rate

Includes getting material, blocking out and forging rocking grate shaft box
complete, ready for dressing.

Steam hammer.

Per first box :

1- As per sketch No.l

2- As per sketch No. 2

Per box after first one :

5- As per sketch No. 1

6- As per sketch No. 2

Forge.

Per first box :

9-As per sketch No.l

10-As per sketch No. 2

Per box after first one :

13-As per sketch No. 1

lA-As per sketch No. 2

GRATE RIGGING

Grate, Rocking — Shaft Box

ASH PAN AND GRATE RIGGING.

455

Grate, Rocking
SHAFT BOX

4S698-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing rock-
ing grate shaft box complete.

Steam hammer.

Per first box :

16- As per sketch No. 1

17- As per sketch No. 2

Per box after first one :

19- As per sketch No. 1

20- As per sketch No. 2

Forge.

Per first box :

23- As per sketch No, 1

24- As per sketch No. 2

Per box after first one :

27- As per sketch No. 1

28- As per sketch No. 2

4S698-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing rocking
grate shaft box complete.

Forge.

Per first box :

I-As per sketch No. 3

Per box after first one :

5-As per sketch No. 3

4S698-18 Straightened. Rate

Includes straightening old rocking grate shaft box when same has become
bent or twisted.

Forge.

Per first box :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No.3

Per box after first one :

7- As per sketch No. 1

8- As per sketch No.2

9- As per sketch No. 3

GRATE RIGGING
Grate, Rocking — Shaft Box

456

BLACKSMITH SHOP SCHEDULES.

Grate, Rocking
SHAFT BOX

4S598-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in rocking grate shaft
box, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per place repaired after first one :

7- As per sketch No.l

8- As per sketch No. 2

9- As per sketch No. 3

4S598-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in rocking grate shaft box,
dressing and finishing over weld complete.

Forge.

Per first hole :

12- As per sketch No.l

13- As per sketch No. 2

14- As per sketch No. 3

Per hole after first one :

18- As per sketch No. 1

19- As per sketch No. 2

20- As per sketch No. 3

GRATE RIGGING

Grate, Rocking — Shaft Box

ASH PAN AND GRATE RIGGING.

457

Grate

SUPPORT

(9r(7/^e 5i//porA5

Orate ^i/pports

4S650-2 Bend changed. Rate

Includes changing bend in grate support.

Forge :

1-Per first bend changed, all sketches

10-Per bend changed after first one, all sketches

4S660-6 Dressed. Rate

Includes bending, cutting out jaw if necessary, dressing and finishing com-
plete, grate support, after same has been forged.

Forge.

Per first support.

When jaw is cut :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

When jaw is not cut :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

10- As per sketch No. 4

11- As per sketch No. 6

GRATE RIGGING

Grate Support

458

BLACKSMITH SHOP SCHEDULES.

Grate

SUPPORT

Per support after first one.
When jaw is cut :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

When jaw is not cut :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4

29- As per sketch No. 6

4S650-9 Forged. Rate

Includes getting material, blocking out and forging complete, grate support
ready for dressing.

Steam hammer.

Per first support.

When jaw is cut :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

When jaw is not cut :

8- As per sketch No. 1

9- As per sketch No. 2

10- As per sketch No. 3

11- As per sketch No. 4

12- As per sketch No. 6

Per support after first one.

When jaw is cut :

15- As per sketch No. 1

16- As per sketch No. 2

17- As per sketch No. 3

18- As per sketch No. 4

When jaw is not cut :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4

29- As per sketch No. 6

GRATE RIGGING
Grate Support

ASH PAN AND GRATE RIGGING.

459

Grate

SUPPORT

Forge.

Per first support.

When jaw is cut :

So- As per sketch No. 1

36- As per sketch No. 2

37- As per sketch No. 3

38- As per sketch No. 4

When jaw is not cut :

4o-As per sketch No. 1
• 46-As per sketch No. 2

47- As per sketch No. 3

48- As per sketch No. 4

49- As per sketch No. 6

Per support after first one
When jaw is cut :

55-As per sketch No.

5G-As per sketch No.

57- As per sketch No.

58- As per sketch No.

When jaw is not cut :

65- As per sketch No. 1

66- As per sketch No.2

67- As per sketch No. 3

68- As per sketch No.4

69- As per sketch No. 6

4S650-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing complete, grate support.

Steam hammer.

Per first support :

72-As per sketch No. 6

Per support after first one :

76-As per sketch No. 6

Forge,

Per first support :

80- As per sketch No.l

81- As per sketch No. 2

82- As per sketch No. 3

83- As per sketch No. 4

84- As per sketch No. 6

GRATE RIGGING

Grate Support

460

BLACKSMITH SHOP SCHEDULES.

Grate

SUPPORT

Per support after first one :

90- As per sketch No. 1

91- As per sketch No. 2

92- As per sketch No. 3

93- As per sketch No. 4

94- As per sketch No. 6

4S660-12 Lengthened or shortened. Rate

Includes lengthening or shortening grate support by drawing out or upsetting
same.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

^ 6-As per sketch No. 6

7-As per sketch No. 7

Per support after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

16- As per sketch No. 7

4S660-13 Made (from bar iron). Rate

Includes getting material, doing necessary welding, bending, dressing and
finishing grate support complete.

Forge.

Per first support :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 •.

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 7

Per support after first one :

11- As per sketch No. 1

12- As per sketch No. 2

13- As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5 ...

16- As per sketch No. 7

GRATE RIGGING
Grate Support

ASH PAN AND GRATE RIGGING.

461

Grate

SUPPORT

4S660-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in grate support, dressing
and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

7- As per sketch No. 7

Per place repaired after first one :

11- As per sketch No.l

12- As per sketch No. 2

13- As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

17- As per sketch No. 7

4S650-21 Welded (crack). Rate...

Includes making dutchman, welding same in crack in grate support, dressing
and finishing over weld complete.

Forge.

Per first place repaired :

20- As per sketch No.l

21- As per sketch No. 2

22- As per sketch No. 3

23- As per sketch No. 4

24- As per sketch No. 5

25- As per sketch No. 6

26- As per sketch No. 7

Per place repaired after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3

33- As per sketch No. 4

34- As per sketch No. 5

35- As per sketch No. 6

36- As per sketch No. 7

GRATE RIGGING

Grate Support

462

BLACKSMITH SHOP SCHEDULES.

Grate

SUPPORT

4S650-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in grate support, dressing and
finishing over weld complete.

Forge.

Per first hole :

40- As per sketch No. 1

41- As per sketch No. 2

42- As per sketch No. 3

43- As per sketch No. 4

44- As per sketch No. 5

45- As per sketch No. 6

46- As per sketch No. 7

Per hole after first one :

50- As per sketch No.l

51- As per sketch No. 2

52- As per sketch No. 3

53- As per sketch No. 4

54- As per sketch No. 5

55- As per sketch No. 6

56- As per sketch No. 7

GRATE RIGGING
Grate Support

TENDER

.■'’a- Ji .

TENDER

Hand* Brake

ROD, TRUCK BRAKE

4U10-6 Dressed and welded. Rate

Includes getting boss end after same has been forged, and rod, welding boss
end on hand brake truck brake rod, bending rod, dressing and finishing com-
plete.

Forge :

1- Per first rod

2- Per rod after first one

4U10-9 Forged (boss end). Rate ...

Includes getting material, blocking out and forging complete, boss end of
hand brake truck brake rod, ready for welding.

Forge :

1- Per first rod

2- Per rod after first one

4U10-12 Lengthened or shortened. Rate

Includes lengthening or shortening hand brake truck brake rod by drawing
out or upsetting same.

Forge :

1- Per first rod

2- Per rod after first one

4X710-13 Made complete. Rate

Includes getting all material, blocking out, forging boss end, bending end,
welding boss end on hand brake truck brake rod, dressing and finishing to
shape complete. '

Forge :

1- Per first rod

2- Per rod after first one

TENDER BRAKES

Hand Brake Truck Brake Rod

465

466

BLACKSMITH SHOP SCHEDULES.

Hand Brake

ROD, TRUCK BRAKE

4U10-18 Straightened. Rate.

Includes straightening old hand brake truck brake rod when same has become
bent or twisted.

Forge :

1- Per first rod

2- Per rod after first one

4U10-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in hand brake truck brake
rod, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one :

4U10-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in hand brake truck brake rod,
dressing and finishing over weld complete.

Forge :

5- Per first hole plugged

6- Per hole plugged after first one —

4U10-21 Welded (new boss end). Rate

Includes getting new boss end after same has been forged, doing necessary
scarfing, welding boss on hand brake truck brake rod, dressing and finishing
complete.

Forge :

9-Per first end

10-Per end after first one

TENDER BRAKES

Hand Brake Truck Brake Rod

TENDER.

467

Hand Brake ,
STAFF

Tencfer /ia/?a BroHe 5Toff

4U14-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender hand brake staff.-
Power shears ;

1-Per piece cut

4U14-9 Forged (ring end) (at forge). Rate

Includes getting material, blocking out and forging complete, ring end of
tender hand brake staff.

Forge :

1- Per first end

2- Per end after first one

4U14-9 Forged (ring end) (at machine). Rate

Includes changing dies in machine and forging tender hand brake staff in
forging machine after iron has been cut and delivered to machine.

Machine :

5- Per first end

6- Per end after first one

\

4U14-9 Forged (taper end). Rate

Includes getting material and forging end of tender hand brake staff at forge
complete.

Steam hammer :

9-Per first end

10-Per end after first one

Forge :

14- Per first end

15- Per end after first one

4U14-18 Straightened. Rate

Includes straightening old tender hand brake staff when same has become
bent.

Forge :

1- Per first staff

2- Per staff after first one

TENDER BRAKES

Hand Brake Staff

468

BLACKSMITH SHOP SCHEDULES.

Hand Brake ^

STAFF

4U14-21 Welded (brkk). Rate

Includes doing necessary scarfing, welding break in tender hand brake staff,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U14-21 Welded (crack). Rate. ..

Includes making dutchman, welding same in crack in tender hand brake staff,
dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U14-21 Welded (parts together). Rate

Includes getting ring and taper end of tender hand brake staff after same have
been forged, and getting body of tender hand brake staff, welding ends on
body, dressing and finishing staff complete.

Forge :

9-Per first weld

10-Per weld after first one

Steam hammer :

13- Per first weld

14- Per weld after first one

TENDER BRAKES
Hand Brake Staff

TENDER.

469

Hand Brake

STAFF BRACKET

7er76/erHa/?cfBra/(e
St(7// 3rac/fet

4U16-2 Bend changed. Rate

Includes changing bend in tender hand brake staff bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U16-2 Bent. Rate

Includes changing dies in machine and bending tender hand brake staff
bracket after iron has been cut and delivered to machine.

Bulldozer :

5- Per first bracket

6- Per bracket after first one

4U16^ Cut — Iron. Rate

Includes cutting iron at power shears for tender hand brake staff bracket.
Power shears :

1-Per piece cut

4U16-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender hand brake staff bracket by draw-
ing out or upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

TENDER BRAKES
Hand Brake Staff Bracket

470

BLACKSMITH SHOP SCHEDULES.

Hand Brake

STAFF BRACKET

4U16-13 Made. Rate...

Includes getting material, bending, dressing and finishing complete, tender
hand brake staff bracket.

Forge :

1- Per first bracket

2- Per bracket after first one

4U16-18 Straightened. Rate

Includes straightening old tender hand brake staff bracket when same has
become bent or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

4U16-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender hand brake staff
bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U16-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender hand brake
staff bracket, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U16-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender hand brake staff
bracket, dressing and finishing over weld complete.

Forge :

9-Per first hole plugged

10-Per hole plugged after first one

TENDER BRAKES

Hand Brake Staff Bracket

TENDER.

471

Truck Brake

BEAM— CHAIN, SAFETY-BOLT, EYE

7^cfer7racJf6n7/fe^a/T7S(^tyC/?a/^

4U30-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake beam safety chain eye
bolt.

Power 'shears :

1-Per piece cut

4U30-13 Made. Rate

Includes changing dies in machine and bending and finishing complete, truck
brake beam safety chain eye bolt, as per sketch No. 2.

Forge :

1- Per first bolt

2- Per bolt after first one

Machine :

3- Per first bolt

4- Per bolt after first one

4U30-18 Straightened. Rate

Includes straightening old truck brake beatn safety chain eye bolt as per
sketch No. 2, when bolt has become bent or twisted.

Forge.

1-Per first bolt

5-Per bolt after first one

TENDER BRAKES

Truck Brake Beam Safety Chain Eye Bolt

472

BLACKSMITH SHOP SCHEDULES.

Truck Brake

BEAM— CHAIN, SAFETY— HOOK

4U34-2 Bent (at forge). Rate

Includes getting iron for truck brake beam safety chain hook after same has
been cut to length, and bending hook at forge complete.

Forge :

1- Per first hook

2- Per hook after first one

4U34-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer, getting iron for truck brake beam safety
chain hook, and bending iron to form hook complete.

Bulldozer :

5- Per first hook

6- Per hook after first one

4U34-4 Cut — Iron. Rate

Includes getting material and cutting to length, iron for truck brake beam
safety chain hook.

Power shears :

1-Per piece cut

TENDER BRAKES

Truck Brake Beam Safety Chain Hook

TENDER.

473

Truck Brake

BEAM— CHAIN, SAFETY— LINK CLOSED.

4U38-2 Bent. Rate

Includes changing dies in bulldozer, bending link for truck brake beam
safety chain closed hnk at bulldozer after iron has been cut and delivered.

Bulldozer.

Per first link :

1- As per sketch No. 1, top link

2- As per sketch No. 1, bottom link

3- As per sketch No. 2

Per link after first one :

7- As per sketch Np. 1, top link

8- As per sketch No. 1, bottom link

9- As per sketch No. 2

4U38-4 Cut — Iron. Rate

Includes cutting iron at power, shears for truck brake beam safety chain
closed link.

Power shears.

Per piece cut :

1- As per sketch No. 1, top link

2- As per sketch No. 1, bottom link

3- As per sketch No. 2

4U38-13 Made. Rate...

Includes getting material, bending, welding, dressing and finishing complete,
truck brake beam safety chain closed link.

Forge.

Per first link :

1- As per sketch No. 1, top link

2- As per sketch No. 1, bottom link

3- As per sketch No. 2

Per link after first one :

7- As per sketch No. 1, top link

8- As per sketch No. 1, bottom link

9- As per sketch No. 2

4U38-18 Straightened. Rate

Includes straightening old truck, brake beam safety chain closed link when
same has become bent or twisted.

Forge.

Per first link :

1- As per sketch No. 1, top link

2- As per sketch No. 1, bottom link

3- As per sketch No. 2

TENDER BRAKES

Truck Brake Beam Safety Chain Closed Link

474

blacksmith shop schedules.

Truck Brake

BEAM— CHAIN, SAFETY— LINK, CLOSED

Per link after first one :

7- As per sketch No. 1, top link

8- As per sketch No. 1, bottom link ..

9- As per sketch No. 2

4U38-21 Welded (after bent at bulldozer). Rate

Includes getting truck brake beam safety chain closed link after same has
been bent at bulldozer, doing necessary scarfing, welding link together, dress-
ing and finishing complete.

Forge.

Per first link :

1- As per sketch No. 1, top link

2- As per sketch No. 1, bottom link

3- As per sketch No. 2 •

Per link after first one :

7- As per sketch No. 1, top link

8- As per sketch No. 1, bottom link

9- As per sketch No. 2

4U38-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake beam safety
chain closed link, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1, top link

13- As per sketch No. 1, bottom link

14- As per sketch No. 2

Per place repaired after first one :

18- As per sketch No. 1, top link . . .

19- As per sketch No. 1, bottom link

20- As per sketch No. 2

TENDER BRAKES

Truck Brake Beam Safety Chain Closed Link

TENDER.

475

Truck Brake

BEAM— ROD, TIE

7e/?c/er7r^cU^ra/fe 3ea/77 T/e/foc/s

w

/

4U60-2 Bent (jaw end). Rate

Includes changing dies in machine and bending iron for jaw end of truck
brake beam tie rod at bulldozer after iron has been cut and punched.

Bulldozer.

Per first end :

1-As per sketch No. 1

Per end after first one :

5- As per sketch No. 1

4U60-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake beam tie rod.

Power shears :

1-Per piece cut

4U60-6 Dressed. Rate

Includes dressing and finishing truck brake beam tie rod jaw end after same
has been forged solid.

Forge.

Per first end :

1-As per sketch No. 1

Per end after first one :

6- As per sketch No.l

4U60-9 Forged. Rate

Includes changing dies in machine and forging complete, truck brake beam
tie rod jaw end after iron for same has been cut, punched and bent.

Machine.

Per first rod :

1-As per sketch No. 1

Per rod after first one :

5-As per sketch No. 1

TENDER BRAKES
Truck Brake Beam Tie Rod

476

BLAOKSMITH SHOP SCHEDULES.

Truck Brake

BEAM— ROD, TIE

4U60-9 Forged. Rate

Includes getting material, blocking out and forging complete, ready for
dressing, truck brake beam tie rod end.

Steam hammer.

Per first end :

7-As per sketch No.l

9-As per sketch No. 2

Per end after first one :

12-As per sketch No. 1

15-As per sketch No. 2

Forge.

Per first end :

18-As per sketch No. 1

21-As per sketch No. 2

Per end after first one :

25-As per sketch No. 1

27-As per sketch No. 2

4U60-9 Forged (at Bradley hammer). Rate

Includes getting material and forging truck brake beam tie rod complete,
at Bradley hammer.

Bradley hammer.

Per first tie rod :

30-As per sketch No. 2

Per tie rod after first one :

33-As per sketch No. 2

4U60-9 Forged and dressed. Rate..

Includes getting material,- blocking out, forging, dressing and finishing
complete, truck brake beam tie rod.

Forge.

Per first rod :

40- As per sketch No. 1, forged solid

41- As per sketch No. 2

Per rod after first one :

45- As per sketch No. 1, forged solid.

46- As per sketch No. 2

TENDER BRAKES

Truck Brake Beam Tie Rod

TENDER.

477

Truck Brake

BEAM— ROD, TIE

4U60-11 Ground. Rate

Includes grinding at emery wheel complete, truck brake beam tie rod.
Emery wheel.

Per first tie rod :

1-As per sketch No. 2

Per tie rod after first one :

5-As per sketch No. 2

4U60-13 Made (after punched and trimmed). Rate

Includes getting iron for truck brake beam tie rod after same has been punched
and trimmed, getting other material, doing necessary scarfing, welding and
finishing truck brake beam tie rod complete.

Steam hammer.

Per first tie rod :

1-As per sketch No. 2

Per tie rod after first one :

5-As per sketch No. 2

4U60-13 Made (from bar iron). Rate

Includes getting bar iron and making truck brake beam tie rod complete.
Forge.

Per first tie rod :

7-As per sketch No. 2 . . .*

Per tie rod after first one :

9-As per sketch No. 2

4U60-15 Punched (iron for tie bar). Rate

Includes changing dies in power punch and punching iron for truck brake
beam tie bar complete, after iron has been cut and delivered to power punch.

Power punch.

Per first tie rod :

1-As per sketch No. 2

Per tie rod after first one :

5-As per sketch No. 2

I

TENDER BRAKES
Truck Brake Beam Tie Rod

478

BLACKSMITH SHOP SCHEDULES.

Truck Brake

BEAM— ROD, TIE

4U60-15 Punched (web from hole). Rate

Includes punching out web in hole of truck brake beam tie rod.

Forge.

Per first hole :

8-As per sketch No. 2

Per hole after first one :

12-As per sketch No. 2

4U60-1S Straightened. Rate

Includes straightening old truck brake beam tie rod when same has become
bent.

Forge.

Per first rod :

1- As per sketch No. 1

2- As per sketch No. 2

Per rod after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U60-19b Trimmed. , Rate

Includes changing dies in power punch and trimming iron for truck brake
beam tie rod complete, after iron has been punched.

Power punch.

Per first tie rod :

1-As per sketch No. 2 — .

Per tie rod after first one :

5-As per sketch No. 2

4U60-21 Welded (new straight end). Rate —

Includes getting round iron, doing necessary scarfing, welding straight end
on truck brake beam tie rod, dressing and finishing over weld complete.

Forge.

Per first end :

1- As per sketch No. 1

2- As per sketch No. 2

Per end after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TENDER BRAKES

Truck Brake Beam Tie Rod

TENDER.

479

Truck Brake

BEAM— ROD, TRUSS

4U62-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake beam truss rod.

Power shears :

1- Per piece cut

4U62-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake beam truss
rod, dressing and finishing over weld complete.

Forge :

’ 1-Per first weld

2- Per weld after first one

TENDER BRAKES
Truck Brake Beam Truss Rod

480

BLACKSMITH SHOP SCHEDULES.

Truck Brake

FULCRUM SUPPORT

4U80-2 Bend changed. Rate

Includes changing bend in truck brake fulcrum support.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U80-2 Bent (bulldozer). Rate

Includes changing dies in bulldozer and bending truck brake fulcrum sup-
port after iron has been cut and delivered.

Bulldozer :

5- Per first support

6- Per support after first one

4U80-6 Dressed. Rate

Includes cutting slot in ends of truck brake fulcrum support, bending eye
and finishing ends complete, after support has been forged.

Forge :

1- Per first support

2- Per support after first one

4U80-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake fulcrum support by draw-
ing out or upsetting same.

Forge :

1- Per first support

2- Per support after first one

4U80-13 Made. Rate

Includes getting material, cutting ends, bending, dressing and finishing
truck brake fulcrum support complete.

Forge :

1- Per first support

2- Per support after first one —

TENDER BRAKES

Truck Brake Fulcrum Support

TENDER.

481

Truck Brake

FULCRUM SUPPORT

4U80-18 Straightened. Rate

Incjudes straightening old truck brake fulcrum support when same has be-
come bent.

Forge :

1- Per first support

2- Per support after first one

4U80-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake fulcrum
support, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U80-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truck brake fulcrum
support, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one ;

4U80-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake fulcrum support,
dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

4U80-21 Welded (new end). Rate

Includes getting material, cutting and bending new end, welding end on
body of truck brake fulcrum support, dressing and finishing end to shape
complete.

Forge :

15- Per first end

16- Per end after first one

TENDER BRAKES
Truck Brake Fulcrum Support

482

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, CYLINDER

7e/?c/er Trac/f3rv/(e Cy//>?c/er Le^er

Tec7 cfer Tn/c/cBra/feCyMerLe Ker

(® ^ ® ^
z.

4U90-2 Bent. Rate

Includes bending truck brake cylinder lever after same has been made.
Forge.

Per first bend :

1-As per sketch No. 1 •

Per first bend after first one :

5-As per sketch No. 1 — .

4U90-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake cylinder lever.

Power shears.

Per piece cut :

1-As per sketch No, 1 .*

5-As per sketch No. 2

4U90-9 Forged (at lever roller). Rate

Includes heating material after same has been delivered to lever roller,
rolling cylinder lever to shape, and dressing ends complete.

Lever roller.

Per first lever :

1-As per sketch No. 1 -

5-As per sketch No. 2

Per lever after first one :

7-As per sketch No. 1

9-As per sketch No. 2

TENDER BRAKES

Truck Brake — Lever, Cylinder

TENDER.

483

Truck Brake

LEVER, CLYINDER

4U90-9 Forged and dressed. Rate

Includes getting material, forging, dressing and finishing complete, truck
brake cylinder lever.

Steam hammer.

Per first lever :

12- As per sketch No. 1

13- As per sketch No. 2

Per lever after first one :

17-As per sketch No.l

19-As per sketch No. 2

Forge.

Per first lever :

21-As per sketch No.l

25-As per sketch No. 2

Per lever after first one :

28- As per sketch No. 1

29- As per sketch No. 2

4U90-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake cylinder lever by drawing out
or upsetting same.

Forge.

Per first lever :

1- As per sketch No. 1

2- As per sketch No. 2

Per lever after first one :

7-As per sketch No. 1

9-As per sketch No; 2

4U90-14b. Plugged cold— Holes. Rate

Includes making plug, heating same and driving in hole in truck brake
cylinder lever complete.

Forge :

1- Per first hole

2- Per hole after first one

TENDER BRAKES
Truck Brake — Lever, Cylinder

484

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, CYLINDER

4U90-18 Straightened. Rate

Includes straightening old truck brake cylinder lever when same has become
bent or twisted.

Forge.

Per first lever :

1-As per sketch

No.

1

2- As per sketch

No.

2

Per lever after first

one

5- As per sketch

No.

1

6- As per sketch

No.

2

4U90-21 Welded (break). Rate

Includes doing necessary scarfing,* welding break in truck brake cylinder
lever, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per lever after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U90-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truck brake cylinder
lever, dressing and finishing over weld complete.

Forge.

Per first place repaired :

9- As per sketch No.l

13- As per sketch No. 2

P^r place repaired after first one :

17- As per sketch No. 1

18- As per sketch No. 2

4U90-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake cylinder lever,
dressing and finishing over weld complete.

Forge.

Per first hole :

23- As per sketch No. 1

24- As per sketch No. 2 .•

Per hole after first one :

28- As per sketch No. 1

30-As per sketch No. 2

TENDER BRAKES

Truck Brake — Lever, Cylinder

TENDER.

485

Truck Brake

LEVER, DEAD OR LIVE

Tender Brake Dead or Live Lever

4U92-4 Cut— Iron. Rate

Includes cutting iron at power shears for truck brake dead or live lever.
Power shears :

1-Per piece cut

4U92-9 Forged (at lever roller). Rate

Includes heating material after same has been delivered to lever roller,
rolling truck brake dead or live lever to shape, and dressing ends complete.

Lever roller :

1- Per first lever

2- Per lever after first one

4U92-9 Forged and dressed. ^ Rate

Includes getting material, forging, dressing and finishing complete, truck
brake dead or live lever.

Steam hammer :

5- Per first lever

6- Per lever after first one

Forge :

9-Per first lever

10-Per lever after first one

4U92-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake dead or live lever by drawing
out or upsetting same.

•Forge :

1- Per first lever

2- Per lever after first one

4U92-13 Made complete. Rate

Includes getting material, blocking out, forging, dressing and finishing truck
brake dead or five lever complete.

Forge ;

1- Per first lever

2- Per lever after first one

TENDER BRAKES
Truck Brake — Lever, Dead or Live

486

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, DEAD OR LIVE

4U92-14b Plugged cold — Holes. Rate

Includes making plug, heating and driving in hole in truck brake dead or
live lever complete.

Forge :

1- Per first hole

2- Per hole after first one

4TJ92-18 Straightened. Rate

Includes straightening old truck brake dead or live lever when same has be-
come bent or twisted.

Forge :

1- Per first lever

2- Per lever after first one . . *

4U92-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake dead or live
lever, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4TJ92-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truck brake dead or
live lever, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U92-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake dead or live lever,
dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

TENDER BRAKES

Truck Brake — Lever, Dead or Live

TENDER.

487

Truck Brake

LEVER, DEAD— GUIDE

Tender BraHe Dead Lever 6ruide

7

lender Brake Dead Lever Duide

2

TenOer Truer 3rareDeocfLe/erG{y/de5

3 . ^

Teae/er Truer Brare DeocTLerereu/des

y <n>

Tender Brake Dead Lever Guide

<ffr» effnh

<S> <S) O ^2>

4U94-2 Bend changed. Rate.

Includes changing bend in truck brake dead lever guide.

Forge.

Per first bend changed :

1- As per sketch No.l

2- As per sketch No. 2 ^

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5 '

6- As per sketch No. 6

7- As per sketch No.7

TENDER BRAKES
Truck Brake Dead Lever Guide

488

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, DEAD— GUIDE

Per bend changed after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

16- As per sketch No. 7

4U94-2 Bent (bulldozer). Rate

Includes changing dies, bending truck brake dead lever guide at bulldozer
after iron has been cut and delivered to bulldozer.

Bulldozer.

Per first guide :

20- As per sketch No.l

21- As per sketch No. 2

22- As per sketch No. 3, first bend in end

23- As per sketch No. 3, first bend in radius

24- As per sketch No. 5, bend in end or doubled over

25- As per sketch No. 6

26- As per sketch No. 7

Per guide after first one :

30- As per sketch No. 1

31- As per sketch No. 2

32- As per sketch No. 3, bend after first one in end

33- As per sketch No. 3, bend after first one in radius

34- As per sketch No. 5, bend after first one in end or doubled

over

35- As per sketch No. 6

36- As per sketch No. 7

4U94-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake dead lever guide.
Power shears :

1-Per piece cut

4U94-6 Dressed and welded. Rate

Includes getting truck brake dead lever guide or guide end after same has
been bent at bulldozer, doing necessary dressing and bending, welding end on
body of guide, and finishing guide to shape complete.

Forge.

Per first guide :

1-As per sketch No. 1, welded, twisted and end welded on

5-As per sketch No. b, twisted only

Per guide after first one :

7- As per sketch No. 1, welded, twisted and end welded on

9-As per sketch No. 4 twisted only

TENDER BRAKES

Truck Brake Dead Lever Guide

TENDER.

489

Truck Brake

LEVER, DEAD— GUIDE

4U94-12 Lengthened or shortened. 'Rate

Includes lengthening or shortening truck brake dead lever guide by drawing
out or upsetting same.

Forge.

Per first guide : -

1- As per sketch No. 1

2- As per sketch No. 4

Per guide after first one :

5-As per sketch No. 1

7- As per sketch No. 4

4U94-13 Made. Rate

Includes getting material, forging, bending, dressing, welding and finishing
truck brake dead lever guide complete.

Forge.

Per first guide :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6 ^

7- As per sketch No. 7

Per guide after first one :

10- As per sketch No. 1

11- As per sketch No. 2

12- As pel sketch No. 3

13- As per sketch No. 4

14- As per sketch No. 5

15- As per sketch No. 6

10- As per sketch No. 7

4U94-18 Straightened. Rate

Includes straightening old tiuck brake dead lever guide when same has
become bent.

Forge :

1-Per first guide, all sketches

11- Per guide after first one, all sketches

TENDER BRAKES
Truck Brake Dead Lever Guide

490

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, DEAD— GUIDE

4U94-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake dead lever
guide, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 4

Per "place repaired after first one : ,

5- As per sketch No. 1

6- As per sketch No. 4

4U94-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake dead lever guide,
dressing and finishing over weld complete.

Forge :

11-Per first hole, all sketches *.

21-Per hole after first one, all sketches

4U94-21 Welded (new rod or straight end). Rate

Includes getting material, bending and finishing eye in rod end and welding
end on truck brake dead lever guide and finishing complete.

Forge.

Per first end :

30- As per sketch No. 1, straight end

31- As per sketch No. 2, rod end

Per end after first one :

35- As per sketch No. 1, straight end

36- As per sketch No. 2, rod end

4U94-21 Welded and dressed. Rate

Includes welding together sides of truck brake dead lever guide after sides
have been punched and rounded, dressing and finishing complete.

Steam hammer :

40- Per first guide

41- Per guide after first one

Forge :

45- Per first guide

46- Per guide after first one

TENDER BRAKES

Truck Brake Dead Lever Guide

TENDER.

491

Truck Brake

LEVER, DEAD— GUIDE EYE BOLT

4U98-13 Made at forge. Rate

Includes getting material, bending, dressing and finishing truck brake dead
lever guide eye bolt complete.

Forge :

1- Per first eye bolt

2- Per eye bolt after first one

4U98-13 Made (at bulldozer or machine). Rate

Includes changing dies in bulldozer or forging machine, heating iron after
same has been delivered to machine, and making truck brake dead lever
guide eye bolt complete.

Bulldozer :

7- Per first eye bolt

8- Per eye bolt after first one

Machine :

11- Per first eye bolt

12- Per eye bolt after first one

TENDER BRAKES
Truck Brake Dead Lever Guide Eye Bolt

492

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, DEAD— GUIDE LUG

4U102-13 Made and put in lever. Rate

Includes getting material, blocking out, forging, bending, dressing and
finishing truck brake dead lever guide lug, putting lug in guide, twisting stem
of guide, and finishing same complete.

Forge :

1- Per first guide

2- Per guide after first one

TENDER BRAKES

Truck Brake Dead Lever Guide Lu >

TENDER.

493

Truck Brake

LEVER, EQUALIZING

lencfer 7r6^c/f ^rmer^i/oZ/zing Ley'er

4U116-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake equalizing lever.
Power shears ;

1-Per piece cut

4U116-9 Forged (at lever roller). Rate -

Includes heating material after same has been delivered to lever roller, roll-
ing truck brake equalizing lever to shape, and dressing ends complete.

Lever roller :

1-Per first lever

5-Per lever after first one

4U116-9 Forged and dressed. Rate

Includes getting material, forging, dressing and finishing complete, truck
brake equalizing lever.

Steam hammer :

9-Per first lever

13-Per lever after first one

Forge :

16-Per first lever

19-Per lever after first one

4U116-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake equalizing lever by drawing
out or upsetting same.

Forge :

1-Per first lever

5-Per lever after first one

4U116-14b Plugged cold — Holes. Rate

Includes cold-plugging holes in truck brake equalizing lever complete.

1-Per first hole

5-Per hole after first one

TENDER BRAKES
Truck Brake — Equalizing Lever

494

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, EQUALIZING

4U116-18 Straightened. Rate

Includes straightening old truck brake equalizing lever when same has be-
come bent or twisted.

Forge :

1-Per first lever

5-Per lever after first one

4U116-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake equalizing
lever, dressing and finishing over weld complete.

Forge :

1-Per first place repaired

5-Per place repaired after first one

4U116-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truck brake equalizing
lever, dressing and finishing over weld complete.

Forge :

9-Per first place repaired

13-Per place repaired after first one

4U116-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake equalizing lever,
dressing and finishing over weld complete.

Forge :

16-Per first hole

19-Per hole after first one

TENDER BRAKES

Truck Brake — Equalizing Lever

TENDER.

495

Truck Brake

LEVER, EQUALIZING— BRACKET

4U120-2 Bend changed. Rate

Includes changing bend in truck brake equalizing lever bracket.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U120-2 Bent (bulldozer). Rate

Includes changing dies in bulldozer and bending truck brake equalizing
lever bracket after iron has been cut and delivered to bulldozer.

Bulldozer :

5- Per first equalizing lever bracket

6- Per equalizing lever bracket after first one

4X7120-4 Cut — Iron. Rate

Includes cutting iron at power shears for truck brake equalizing lever bracket.
Power shears :

1-Per piece cut

4X7120-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake equalizing lever bracket
by drawing out or upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

TENDER BRAKES
Truck Brake Equalizing Lever Bracket

496

BLACKSMITH SHOP SCHEDULES.

Truck Brake

LEVER, EQUALIZING— BRACKET

4U120-13 Made. Rate

Includes getting material, bending, dressing and finishing truck brake
equalizing lever bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one -

4U120-18 Straightened. Rate

Includes straightening old truck brake equalizing lever bracket when same
has become bent or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

4U120-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake equalizing
lever bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired —

2- Per place repaired after first one

4U120-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truck brake equalizing
lever bracket, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U120-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake equalizing lever
bracket, dressing and finishing over weld complete.

Forge :

10- Per first hole

1 1- Per hole after first one -

TENDER BRAKES

Truck Brake Equalizing Lever Bracket

TENDER.

497

Truck Brake

ROD, CONNECTING

Truck Brake Top or Bottom Connecting Rod

4U150-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake connecting rod by drawing
out or upsetting same.

Forge :

1- Per first rod

2- Per rod after first one —

4U150-13 Made (after parts are forged). Rate

Includes getting material for center of truck brake connecting rod after
jaws have been made, doing necessary scarfing, welding jaws on center of
rod, dressing and finishing rod to shape complete.

Steam hammer :

1- Per first rod

2- Per rod after first one

Forge :

5- Per first rod

6- Per rod after first one

4U150-18 Straightened. Rate.

Includes straightening old truck brake connecting rod when same has be-
come bent or twisted.

Forge :

1- Per first rod

2- Per rod after first one —

4U150-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake connecting
rod, dressing and finishing over weld complete.

Forge ;

1- Per first place repaired

2- Per place repaired after first one

TENDER BRAKES
Truck Brake Connecting Rod

498

BLACKSMITH SHOP SCHEDULES.

Truck Brake

ROD, CONNECTING

4U150-21 Welded (crack). Rate.

Includes making dutchman, welding same in crack in truck brake connect-
ing rod, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U150-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake connecting rod,
dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

TENDER BRAKES

Truck Brake Connecting Rod

TENDER.

499

Truck Brake

ROD, CONNECTING— END

4U154-4 Cut— Iron. Rate

Includes cutting iron at power shears for jaw end of truck brake connect-
ing rod.

Power shears :

1-Per piece cut '

4U164-13 Made (at forge). Rate

Includes getting material, bending, welding, dressing and finishing jaw end
of truck brake connecting rod complete.

Forge :

1- Per first end

2- Per rod after first one •

4U154-15 Punched — Holes. Rate

Includes changing dies in power punch and punching complete, holes in
pieces for truck brake connecting rod jaw.

Power punch :

1- Per first hole

2- Per hole after first one

4U154-19b. Trimmed. Rate

Includes changing dies in power punch and trimming complete, pieces for
jaws of truck brake connecting rod after iron has been cut.

Power punch :

1- Per first piece

2- Per piece after first one

4U154-21 Welded (at forge after trimmed and punched). Rate

Includes getting pieces for truck brake connecting rod jaw after same have
been trimmed and punched, welding pieces together and finishing jaw com-
plete.

Forge :

1- Per first jaw

2- Per jaw after first one

4U154-21 Welded (jaw on body). Rate

Includes getting jaw end of truck brake connecting rod, doing necessary
scarfing, welding jaw end on body of rod, dressing and finishing weld and
rod to length complete.

Forge :

5- Per first end

6- Per end after first one

TENDER BRAKES
Truck Brake Connecting Rod End

500

BLACKSMITH SHOP SCHEDULES.

Truck Brake

ROD, CONNECTING— BAR, SIDE

Tender Truck Brake Connecting Rod Side Bar

G

G

O

G

4U160-4 Cut — Iron. Rate...

Includes cutting iron at power shears for truck brake connecting rod side
bar.

Power shears :

1-Per piece cut

4TJ160-6 Dressed. Rate

Includes dressing and finishing complete, truck brake connecting rod side
bar.

Forge :

1- Per first bar

2- Per bar after first one

4U160-11 Ground. Rate

Includes grinding ends of truck brake connecting rod side bar after iron has
been cut.

Emery wheel :

1- Per first bar

2- Per bar after first one

4U160-12 Lengthened or shortened. Rate

Includes lengthening or shortening truck brake connecting rod side bar
by drawing out or upsetting same.

Forge :

1- Per first bar

2- Per bar after first one —

4U160-18 Straightened. Rate

Includes straightening old truck brake connecting rod side bar when same
has become bent or twisted.

Forge :

1- Per first bar

2- Per bar after first one

TENDER BRAKES

Truck Brake Connecting Rod Side Bar

TENDER.

501

Truck Brake

ROD, CONNECTING— BAR, SIDE

4U160-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truck brake connecting
rod side bar, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U160-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truck brake connect-
ing rod side bar, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U160-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truck brake connecting rod
side bar, dressing and finishing^over weld complete.

F orge :

9-Per first hole '

10-Per hole after first one.

TENDER BRAKES
Truck Brake Connecting Rod Side Bar

502

BLACKSMITH SHOP SCHEDULES.

Tender Frame

CHAIN, SAFETY-BOLT, EYE

4U200-4 Cut — Iron. Rate

Includes cutting iron at power shears for safety chain eye bolt.

Power shears :

1-Per piece cut

4U200-6 Dressed. Rate

Includes cutting eye, dressing and finishing complete, safety chain eye bolt
after same has been forged and stamped.

Forge :

1-Per first bolt 1 .—

5-Per bolt after first one

4U200-9 Forged. . Rate

Includes getting material, blocking out and forging complete, ready for
dressing, safety chain eye bolt.

Steam hammer.

Per first bolt :

1-Bolt 1|" or less in diameter

3-Bolt Ij" to 1|" inclusive

Per bolt after first one :

5-Bolt or less in diameter

7-Bolt 1\" to lU' inclusive

Forge.

Per first bolt :

9-Bolt li" or less in diameter •

11-Bolt 1\" to 1|" inclusive

Per bolt after first one :

13-Bolt 1|" or less in diameter

15-Bolt Ij" to lY' inclusive

Bradley hammer.

Per first bolt :

17-Bolt 1|" or less in diameter

Per bolt after first one : ^

19-Bolt 1|" or less in diameter

TENDER FRAME

Chain, Safety — Eye Bolt

TENDER.

503

Tender Frame

CHAIN, SAFETY-BOLT, EYE

4U200-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, dressing and finishing com-
plete, safety chain eye bolt.

Forge.

Per first bolt :

25-Bolt or less in diameter

27-Bolt to 1-2-" inclusive

Per bolt after first one :

30-Bolt If" or less in diameter

33-Bolt 1 \" to 1|" inclusive

4U200-11 Ground and finished. Rate

Includes grinding and finishing at emery wheel safety chain eye bolt after
same has been made at Bradley hammer and punched at power punch.

Emery wheel :

1- Per first eye bolt

2- Per eye bolt after first one

4U200-15 Punched (web out). Rate

Includes changing dies in power punch and punching out web in hole of
safety chain eye bolt after bolt has been forged at Bradley hammer.

Power punch :

1- Per first eye bolt

2- Per eye bolt after first one

4U200-18 Straightened. Rate

Includes straightening old safety chain eye bolt when same has become bent
or twisted.

Forge :

1-Per first bolt

5-Per bolt after first one

4U200-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in safety chain eye bolt,
dressing and finishing over weld complete.

Forge :

1-Per first place repaired...

5-Per place repaired after first one

TENDER FRAME
Chain, Safety — Eye Bolt

504

BLACKSMITH SHOP SCHEDULES.

Tender Frame

CHAIN, SAFETY-BOLT, EYE

4U200-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in safety chain eye bolt,-
dressing and finishing over weld complete.

Forge :

9-Per first place repaired

13-Per place repaired after first one

TENDER FRAME

Chain, Safety — Eye Bolt

TENDER.

505

Tender Frame

CHAIN, SAFETY— CLEVIS OR U BOLT

4U204-1 Balled up — Ends. Rate

Includes changing dies in foiging machine and balling up ends of safety chain
clevis or U bolt.

Machine :

1- Per first end

2- Per end after first one

4U204-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending safety chain clevis or U
bolt after same has been cut and delivered to machine.

Bulldozer.

Per first clevis or U bolt :

1- As per sketch No. 2, clevis ;

2- As per sketch No. 2, U bolt

3- As per sketch No. 3, U bolt

Per clevis or U bolt after first one :

7- As per sketch No. 2, clevis

8- As per sketch No. 2, U bolt

9- As per sketch No. 3, U bolt

4U204-4 Cut— Iron. Rate

Includes cutting iron at power shears for safety chain clevis or U bolt.
Power shears :

1-Per piece cut

4U204-9 Forged. Rate

Includes getting material, blocking out and forging complete at steam
hammer, safety chain clevis oi U bolt.

Steam hammer :

1- Per first clevis or U bolt

2- Per clevis or U bolt after first one

TENDER FRAME
Chain, Safety — Clevis or U Bolt

506

BLACKSMITH SHOP SCHEDULES.

Tender Frame

CHAIN, SAFETY— CLEVIS OR U BOLT

4U204-13 Made. Rate

Includes getting material, bending, dressing, welding and finishing safety
chain clevis or U bolt complete.

Forge.

Per first clevis or U bolt :

1- As per sketch No. 2, clevis

2- As per sketch No. 2, U bolt

3- As per sketch No. 3, U bolt

Per clevis or U bolt after first one :

7- As per sketch No. 2, clevis

8- As per sketch No. 2, U bolt

9- As per sketch No. 3, U bolt

4U204-18 Straightened. Rate

Includes straightening old safety chain U bolt or clevis when same has be-
come bent.

Forge.

Per first clevis or U bolt :

1- As per sketch No. 2, clevis

2- As per sketch No. 2, U bolt . . . .-

3- As per sketch No. 3, U bolt

Per clevis or U bolt after first one :

7- As per sketch No. 2, clevis

8- As per sketch No. 2, U bolt

9- As per sketch No. 3, U bolt

4U204-21 Welded (break). Rate..

Includes doing necessary scarfing, welding break in safety chain clevis or U
bolt, dressing and finis Wg over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 2, clevis .

2- As per sketch No. 2, U bolt

3- As per sketch No. 3, U bolt

Per place repaired after first one :

7- As per sketch No. 2, clevis

8- As per sketch No. 2, U bolt

9- As per sketch No. 3, U bolt

TENDER FRAME

Chain, Safety — Clevis or U Bolt

TENDER,

507

Tender Frame

CHAIN, SAFETY— CLEVIS OR U BOLT

4U204-21 Welded (crack). , Rate

Includes making dutchman, welding same in crack in safety chain clevis or
U bolt, dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 2, clevis

13- As per sketch No. 2, U bolt

IF- As per sketch No. 3, U bolt

Per place repaired after first one :

17- As per sketch No. 2, clevis

18- As per sketch No. 2, U bolt ?

19- As per sketch No. 3, U bolt

TENDER FRAME
Chain, Safety — Clevis or U Bolt

508

BLACKSMITH SHOP SCHEDULES.

Tender Frame

CHAIN, SAFETY— HOOK

4U208-1 Balled up. Rate

Includes changing dies in forging machine and balling up iron for eye end of
safety chain hook.

Machine.

1-Per first hook

5-Per hook after first one

4U208-2 Bent. Rate

Includes changing dies in bulldozer and bending safety chain hook after hook
has been made in forging machine.

Bulldozer.

1-Per first hook

5-Per hook after first one

4U208-4 Cut— Iron. Rate

Includes cutting iron at power shears for safety chain hook.

Power shears :

1-Per piece cut

4U208-6 Dressed. Rate...

Includes dressing and finishing complete, hook for safety chain after hook has
been forged and bent.

Forge.

1-Per first hook

5-Per hook after first one

4U208-9 Forged (eye end). Rate

Includes changing dies in machine and forging eye end of safety chain hook.
Machine.

1-Per first end

5-Per end after first one

TENDER FRAME

Chain, Safety — Hook

TENDER.

509

Tender Frame

CHAIN, SAFETY— HOOK

4U208-9 Forged (pointed end). Rate

Includes changing dies in machine and forging pointed end of safety chain
hook.

Machine.

7-Per first end

11-Per end after first one

4U208-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, bending, dressing and
finishing complete, safety chain hook.

Forge.

15-Per first hook

18-Per hook after first one

4U208-18 Straightened. Rate

Includes straightening old safety chain hook when same has become bent.
Forge.

21-Per first hook

25-Per hook after first one

TENDER FRAME
Chain, Safety — Hook

510

BLACKSMITH SHOP SCHEDULES.

Tender Frame

CHAIN, SAFETY— LINK, CLOSED

4U212-2 Bent.

Rate..

Includes changing dies in bulldozer, and bending link for safety chain closed
link at bulldozer after iron has been cut and dehvered.

Bulldozer.

Per first link, all sketches :

1- Link I" to 1|" inclusive :

2- Link 1 \" to 1|" inclusive

Per link after first one, all sketches :

5- Link to 1^" inclusive

6- Link 1 \" to inclusive

4U212-4 Cut — Iron. Rate.

Includes cutting iron at power shears for safety chain closed link.
Power shears.

Per piece cut :

1- As per sketch No. 1, top link

2- As per sketch No. 1, bottom link

3- As per sketch No. 2

TENDER FRAME

Chain, Safety — Closed Link

TENDER.

511

Tender Frame

CHAIN, SAFETY— LINK, CLOSED
4U212-13 Made. Rate

Includes getting material, bending, welding in chain, dressing and finishing
complete, safety chain closed link.

Forge.

Per first link, all classes :

1- Link I" to li" inclusive

2- Link 1 \" to 1|" inclusive

Per link after first one, all classes :

5- Link to 1|" inclusive

6- Link 1 \" to inclusive

4U212-18 Straightened. Rate

Includes straightening old safety chain closed link when same has become
bent or twisted.

Forge.

Per first link :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per link after first one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4U212-21 Welded (after bent at bulldozer). Rate

Includes getting safety chain closed link after same has been bent at bull-
dozer, doing necessary scarfing, welding link together, dressing and finishing
complete.

Forge.

Per first link, all classes :

1-Link I" to inclusive

3-Link 1|" to 1|" inclusive

Per fink after first one, all classes :

7-Link to li" inclusive

9-Link 1|" to 1|" inclusive

4U212-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in safety chain closed link,
dressing and finishing over weld complete.

Forge.

Per first link, all classes :

11-Link I" to 1|" inclusive

13-Link to 1|" inclusive

Per link after first one, all classes :

17-Link to inclusive

19-Link 1^" to inclusive

TENDER FRAME
Chain, Safety — Closed Link

512

BLACKSMITH SHOP SCHEDULES.

Tender Frame

COUPLER CARRIER

Tender Coupler Carrier

4U220-2 Bend changed. Rate

Includes changing bend in tender coupler carrier.

Forge.

1- Per first bend changed

2- Per bend changed after first one

4U220-2 Bent. Rate

Includes changing dies in machine and bending tender coupler carrier
after iron has been cut and delivered to machine.

Bulldozer :

5- Per first carrier

6- Per carrier after first one

4U220-4 Cut — Iron. Rate

Includes cutting iron for tender coupler carrier at power shears.

Power shears :

1-Per piece cut

4U220-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender coupler carrier by drawing out
or upsetting same.

Forge :

1- Per first carrier

2- Per carrier after first one

4U220-13 Made. Rate

Includes getting material, bending, dressing.and finishing complete, tender

coupler carrier.

Forge :

1- Per fiist carrier =

2- Per carrier after first one

TENDER FRAME
Coupler Carrier

TENDER.

513

Tender Frame

COUPLER CARRIER

4U220-18 Straightened. Rate

Includes straightening old tender coupler carrier when same has become
bent or twisted.

Forge :

1- Per first carrier

2- Per carrier after first one

4U220-21 Welded (break). Rate..

Includes welding break in tender coupler carrier, dressing and finishing
over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U220-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender coupler carrier,
dressing and finishing over weld complete.

Forge ;

5- Per first place repaired

6- Per place repaired after first one

4U220-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender coupler carrier, dress-
ing and finishing over weld complete.

Forge :

9-Per first hole plugged

10-Per hole plugged after first one

TENDER FRAME

Coupler Carrier

514

BLACKSMITH SHOP SCHEDULES.

Tender Frame

COUPLER— ROD, UNCOUPLING

7e/?cier Coi/p/erC//7coLp///?^/foc/

4U222-12 Lengthened or shortened. Rate

Includes lengthening or shortening body, handles or lifting arm of coupler
uncoupling rod, by drawing out or upsetting.

Forge ; '

1- Per first place lengthened or shortened

2- Per place lengthened or shortened after first one

4U222-13 Made. Rate

Includes getting material, bending, welding on lifting arm, dressing and finish-
ing uncoupling rod to shape complete.

Forge :

1- Per first rod

2- Per rod after first one

4U222-18 Straightened. Rate

Includes straightening old coupler uncoupling rod when same has become
bent.

Forge :

1- Per first place straightened

2- Per place straightened after first one

4U222-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in coupler uncoupling rod,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

TENDER FRAME

Coupler Uncoupling Rod

TENDER.

515

Tender Frame

COUPLER— ROD, UNCOUPLING

4U222-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in coupler uncoupling
rod, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U222-21 Welded (new handle). Rate

Includes getting bar iron, welding same on rod of coupler uncoupling rod
dressing and finishing to shape complete.

Forge :

8- Per first handle

9- Per handle after first one

4U222-21 Welded (new lifting arm). Rate

Includes getting material, forging arm, welding same on coupler uncoupling
rod, dressing and finishing arm to shape complete.

Forge :

11- Per first arm

12- Per arm ^fter first one

TENDER FRAME
Coupler Uncoupling Rod

516

BLACKSMITH SHOP SCHEDULES.

Tender Frame

COUPLER YOKE

Tender Coupler Yoke

4U224-2 Bent. Rate

Includes changing dies in bulldozer, and bending tender coupler yoke after
ends are formed and yoke has been delivered to bulldozer or forge.

Forge :

1-Per first yoke

6-Per yoke after first one

Bulldozer :

10-Per first yoke

15-Per yoke after first one :

4U224-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender coupler yoke.

Power shears :

1-Per piece cut

4U224-7 Fitted and applied (on coupler). Rate

Includes getting tender coupler yoke after same has been made ready for
applying, applying yoke on coupler and putting in all rivets complete.

Forge :

1-Per first yoke

5-Per yoke after first one

4U224-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender coupler yoke by drawing out or
upsetting same.

Forge :

1-Per first side of yoke

5-Per side of yoke after first one

TENDER FRAME
Coupler Yoke

TENDER.

517

Tender Frame

COUPLER YOKE

4U224-13 Made. _ Rate

Includes getting material, forging ends, bending, dressing and finishing
tender coupler yoke to shape complete.

Forge :

1-Per first yoke

•5-Per yoke after first one

4U224-15a Removed and reapplied (on coupler). Rate

Includes cutting off old rivets and remo\fing old yoke from tender coupler,
getting new yoke and riveting same on coupler.

Forge :

1-Per first yoke

5-Per yoke after first one

4U224-15a Removed (rivet). Rate..

Includes cutting off old rivet in tender coupler yoke and appl 3 ung new rivet
complete.

Forge :

9-Per first rivet

14-Per rivet after first one

4U224-18 Straightened (yoke removed from coupler). Rate

Includes straightening old tender coupler yoke when same has become bent
and when yoke is removed from coupler.

Forge :

1-Per first yoke

0- Per yoke after first one '

4U224-18 Straightened (yoke on coupler). Rate

Includes straightening old tender coupler yoke when same has become bent
and when yoke is riveted on coupler.

Forge :

9-Per first yoke

13-Per yoke after first one

4U224-21 Welded ^break). Rate

Includes doing necessary scarfing, welding break in tender coupler yoke,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

5-Per place repaired after first one

TENDER FRAME

Coupler Yoke

518

BLACKSMITH SHOP SCHEDULES.

Tender Frame

COUPLER YOKE

4U224-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender coupler yoke,
dressing and finishing over weld complete.

Forge :

10-Per first place repaired

15-Per place repaired after first one

4U224-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in tender coupler yoke, dress-
ing and finishing over weld complete.

Forge:

20-Per first hole

24- Per hole after first one —

4XJ224-21 Welded (new end) (after same has been forged). Rate

Includes getting new end for tender coupler yoke after end has been forged,
doing necessary scarfing, welding end on body of yoke, dressing and finishing
over weld complete.

Forge :

30-Per first end

34-Per end after first one

TENDER FRAME
Coupler Yoke

TENDER.

519

Tender Frame

COUPLER YOKE END

4U226-9 Forged. Rate

Includes getting material, blocking out and forging coupler yoke end at
forge or changing dies in forging machine and forging end complete, after
material has been delivered.

Forge :

1- Per first end

2- Per end after first one

Machine :

3- Per first end

4- Per end after first one

, TENDER FRAME

Coupler Yoke End

520

BLACKSMITH SHOP SCHEDULES.

Tender Frame
DRAWBAR

Tender Draiv Bor

Tender Droh/' Bor

Tender Ornip Bar .

TENDER FRAME
Drawbar

TENDER.

521

Tender Frame

DRAWBAR

4U240-2 Bend or offset changed. Rate

Includes changing bend or offset in tender drawbar.

Steam hammer.

Per first drawbar :

1- As per sketch Xo. 1

2- As per sketch Xo. 3, both bends changed .

Per drawbar after first one ;

5- As per sketch Xo. 1

6- As per sketch Xo. 3, both bends changed

Forge.

Per first drawbar :

9-As per sketch Xo. 1

10-As per sketch Xo. 3, both bends changed ,

Per drawbar after first one :

13- As per sketch Xo. 1

l^F-As per sketch Xo. 3, both bends changed

4U249-3 Closed (holes). Rate

Includes heating end of tender drawbar, and closing holes complete.

Forge.

Per first hole :

1- Drawbar 24" long or less ..

2- Drawbar over 24" long to 36" long incl

3- Drawbar over 36" long to 48" long incl

4- Drawbar over 48" long to 60" long incl

5- Drawbar over 60" long

Per hole after firs1| one :

7- Drawbar 24" long or less

8- Drawbar over 24" long to 36" long incl

9- Drawbar over 36" long to 48" long incl

10- Drawbar over 48" long to 60" long incl

11- Drawbar over 60" long

4U240-6 Dressed (ends). Rate.

Includes dressing eyes and ends o'f tender drawbar complete, after drawbar
has been forged.

Forge.

Per first end :

1- Drawbar 24" long or less

2- Drawbar over 24" long to 36" long incl

3- Drawbar over 36" long to 48" long incl

4- Drawbar over 48" long to 60" long incl

5- Drawbar over 60" long

TENDER FRAME

Drawbar

522

BLACKSMITH SHOP SCHEDULES.

Tender Frame

DRAWBAR

Per end after first one :

8- Drawbar 24" long or less

9- Drawbar over 24" long to 36" long incl

10- Drawbar over 36" long to 48" long incl

11- Drawbar over 48" long to 60" long incl*.

12- Drawbar over 60" long

4U240-9 Forged. Rate

Includes getting material, blocking out, forging and bending tender drawbar
complete.

Steam hammer :

Straight, drawbar 42" long or less, made from scrap axle ;

1- Per first drawbar

2- Per drawbar after first one

Straight drawbar 42" long or less, made from piled iron ; in-
cludes welding pile :

5- Per first drawbar

6- Per drawbar after first one

Straight drawbar over 42" long, made from scrap axle :

10- Per first drawbar

11- Per drawbar after first one

Straight drawbar over 42" long, made from pile iron ; includes
welding pile :

15- Per first drawbar

16- Per drawbar after first one

Drawbars with offset on one end, 42" long or less, made from
scrap axle :

20- Per first drawbar

21- Per drawbar after first one

Drawbars with offset on one end, 42" long or less, made from
piled iron, includes welding pile :

25- Per first drawbar

26- Per drawbar after first one

Drawbars with offset on both ends, 42" long or less, made from
scrap axle :

30- Per first drawbar

31- Per drawbar after first one

Drawbars with offset on both ends, 42" long or less, made from
piled iron, includes welding pile:

35- Per first drawbar '

36- Per drawbar after first one

I

Drawbars with offset on both ends over 42" long, made from
scrap axle :

40- Per first drawbar

41- Per drawbar after first one

TENDER FRAME
Drawbar

TENDER.

523

Tender Frame
DRAWBAR

Drawbars with offset on both ends over 42" long, made from
pile iron, includes welding pile :

45- Per first drawbar

46- Per drawbar after first one

Forge:

Straight drawbar 42" long or less, made from scrap axle :

50- Per first drawbar

51- Per drawbar after first one »

Straight drawbar over 42" long, made from scrap axle :

5fi-Per first drawbar

57-Per drawbar after first one

Drawbars with offset on one end, 42" long or less, made from
scrap axle :

60- Per first drawbar

61- Per drawbar after first one

Drawbars with offset on both ends, 42" long or less, made from
scrap axle :

65- Per first drawbar

66- Per drawbar after first one

Drawbars with offset on both ends over 42" long, made from
scrap axle :

70- Per first drawbar •

71- Per drawbar after first one

4U240-12 Lengthened. . Rate.

Includes lengthening tender drawbar by drawing out same.

Steam hammer.

Per first drawbar :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per drawbar after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

Forge.

Per first drawbar :

17- As per sketch No.l

18- As per sketch No. 2

19- As per sketch No. 3

20- As per sketch No. 4

TENDER FRAME

Drawbar

524

BLACKSMITH SHOP SCHEDULES.

Tender Frame

DRAWBAR

Per drawbar after first one :

25- As per sketch No. 1

26- As per sketch No. 2

27- As per sketch No. 3

28- As per sketch No. 4 ^

4U240-13 Made complete. Rate

Includes getting material, blocking out, forging, putting in offset, dressing
and finishing tender drawbar complete.

Forge.

Straight drawbar 42" long or less, made from scrap axle ;

1- Per first drawbar

2- Per dlawbar after first one

Straight drawbar over 42" long, made from scrap axle :

5- Per first drawbar

6- Per drawbar after first one

Drawbars with offset on one end, 42" long or less :

10- Per first drawbar ;

11- Per drawbar after first one

Drawbars with offset on both ends, 42" long or less, made from
scrap axle :

15- Per first drawbar

16- Per drawbar after first one

Drawbars with offset on both ends over 42" long, made from
scrap axle :

20- Per first drawbar

21- Per drawbar after first one

4U240-17 Shortened (by upsetting). Rate

Includes shortening tender drawbar by upsetting same complete.

Forge.

Per first f " upset :

1- Drawbar 24" long or less

2- Drawbar over 24" long to 36" long incl

3- Drawbar over 36" long to 48" long incl

4- Drawbar over 48" long to 60" long incl

5- Drawbar over 60" long '..

Per each additional upset :

8- Drawbar 24" long or Jess.

9- Drawbar over 24" long to 36" long incl

10- Drawbar over 36" long to 48" long incl

11- Drawbar over 48" long to 60" long incl

12- Drawbar over 60" long

TENDER FRAME
Drawbar

TENDER.

525

Tender Frame

DRAWBAR

4U24Q-18 Straightened. Rate

Includes straightening old tender drawbar when same has become bent.
Steam hammer.

Per first drawbar ;

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

Per drawbar after first one :

10- As per sketch No.l

11- As per sketch No. 2

12- As per sketch No. 3

13- As per sketch No. 4

Forge.

Per first drawbar ;

20- As per sketch No. 1

21- As per sketch No. 2

22- As per sketch No. 3

23- As per sketch No. 4

Per drawbar after first one :

30- As per sketch No.l

31- As per sketch No. 2

32- As per sketch No. 3

33- As per sketch No. 4

4U240-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender drawbar,
dressing and finishing over weld complete.

Forge.

Per first place repaired, all shapes of drawbars :

20- Drawbar 24" long or less

21- Drawbar over 24" long to 36" long incl

22- Drawbar over 36" long to 48" long incl

23- Drawbar over 48" long to 60" long incl

24- Drawbar over 60" long

Per place repaired after first one, all shapes of drawbars :

30- Drawbar 24" long or less

31- Drawbar over 24" long to 36" long incl

32- Drawbar over 36" long to 48" long incl

33- Drawbar over 48" long to 60" long incl

34- Drawbar over 60" long

TENDER FRAME

Drawbar

526

BLACKSMITH SHOP SCHEDULES.

Tender Frame ’ *

DRAWBAR

4U240-21 Welded (piece against end of drawbar). . Rate

Includes getting material, doing necessary scarfing, welding piece against
end of tender drawbar, closing hole, straightening and repairing end com-
plete.

Forge.

Per first end :

41- Drawbar 24" long or less

42- Drawbar over 24" long to 36" long incl

43- Drawbar over 36" long to 48" long incl

44- Drawbar over 48" long to 60" long incl

45- Drawbar over 60" long and over

Per end after first one :

50- Drawbar 24" long or less

51- Drawbar over 24" long to 36" long incl

52- Drawbar over 36" long to 48" long incl

53- Drawbar over 48" long to 60" long incl

54- Drawbar over 60" long

4U240-21 Welded (piece around entire end of drawbar). Rate

Includes getting material, doing necessary scarfing, welding piece around
entire end of tender drawbar to make bar 8|" wide across, end or over,
closing hole, straightening and repairing end complete.

Forge.

Per first end :

60- Drawbar 48" long to 60" long incl

61- Drawbar over 60" long

Per end after first one :

65- Drawbar 48" long to 60" long incl

66- Drawbar over 60" long

4U240-21 Welded (dutchman in hole and hole closed). Rate

Includes making dutchman, welding same in crack around hole in tender
drawbar, closing hole, dressing and finishing end complete.

Forge.

Per first end :

70- Drawbar 24" long or less

71- Drawbar over 24" long to 36" long incl

72- Drawbar over 36" long to 48" long incl

73- Drawbar over 48" long to 60" long incl

74- Drawbar over 60" long

Per end after first one :

80- Drawbar 24" long or less —

81- Drawbar over 24" long to 36" long incl -

82- Drawbar over 36" long to 48" long incl

83- Drawbar over 48" long to 60" long incl

84- Drawbar over 60" long!

TENDER FRAME

Drawbar ,

TENDER.

527

Tender Frame

DRAWBAR PIN

4U244-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender drawbar pin.

Power shears.

Per piece cut :

1- Iron 2" to 2|" diameter

2- Iron 2^" to 3" diameter

4U244-4 Cut — Iron (at forge). Rate

Includes cutting iron for tender drawbar pin at forge.

Forge :

5- Per first piece cut '

6- Per piece cut after first one

4U244-6 Dressed — Ends pointed. Rate

Includes pointing ends of tender draw bar pin after pin has been forged.
Includes changing dies when pins are pointed in forging machine.

Steam hammer :

1- Per first pin, all sizes

2- Per pin after first one, all sizes

Forge :

3- Per first pin, all sizes

4- Per pin after first one, all sizes '

Machine.

Per first pin :

7- Pin less than 3" diam

8- Pin Z" diameter or over

Per pin after first one :

12- Pin 3" less than 3" diam

13- Pin 3" diameter or over

TENDER FRAME

Drawbar Pin

528

BLACKSMITH SHOP SCHEDULES.

Tender Frame

DRAWBAR PIN

4U244-10 Formed (heads). Rate

Includes forming complete head on tender drawbar pin when pin is made
from bar iron, cutting iron not included.

Forge.

Per first pin :

1- Pin 2|" diameter or less

2- Pin over 2f " diameter

Per pin after first one :

5- Pin 2f" diameter or less

6- Pin over 2f " diameter

4U244-lla Headed (at forging machine). Rate

Includes changing dies in forging machine and heading complete, tender
drawbar pin after iron has been cut and delivered to machine.

Machine.

Per first pin :

1- Iron 2" diameter

2- Iron 2j" to 1 \" diameter incl

3- Iron 2f" to 3" diameter incl

4- Iron over 3" diameter

Per pin after first one :

9-Iron 2" diameter •

10- Iron 2j" to 2|" diameter incl

11- Iron 2|" to 3" diameter incl

12- Iron over 3" diameter ...

4U244-13 Made complete. Rate

Includes getting scrap axles, forging, dressing and finishing complete, tender
drawbar pin.

Steam hammer :

1- Per first pin

2- Per pin after first one

Forge.

Per first pin :

5- Pin less than 3" diameter

6- Pin 3" diameter or over

Per pin after first one :

9-Pin less than 3" diameter

10-Pin 3" diameter or over

TENDER FRAME
Drawbar Pin

TENDER.

529

Tender Frame

DRAWBAR PIN

4U244-18 Straightened. Rate

Includes straightening old tender drawbar pin when same has become bent.
Steam hammer :

1- Per first pin

2- Per pin after first one

Forge :

3- Per first pin

4- Per pin after first one

4U244-20a Upset. Rate

Includes upsetting tender drawbar pin and repairing same where worn.
Forge :

1- Per first pin, all sizes

2- Per. pin after first one, all sizes 1

T ENDER FRAME

Drawbar Pin

530

BLACKSMITH SHOP SCHEDULES.

Tender Frame

DRAWBAR— YOKE FOLLOWER

Tender Couple Yoke Follower

§

4U246-4 Cut — Iron, and ground. Rate

Includes cutting iron at power shears and grinding sides and ends of same
to form, coupler yoke follower complete.

Power shears and emery wheel :

1-Per follower

4U246-13 Made. Rate

Includes getting material, forging, dressing and finishing coupler yoke fol-
lower complete.

Steam hammer.

1- Per first follower

2- Per follower after first one

Forge :

3- Per first follower

4- Per follower after first one

4U246-18 Straightened. Rate

Includes straightening old coupler yoke follower when same has become
bent or twisted.

Forge :

1- Per first follower

2- Per follower after first one

4U246-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in coupler yoke follower, dress-
ing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

TENDER FRAME

Drawbar Yoke Follower

TENDER.

531

Tender Frame

DRAWBAR YOKE FOLLOWER CARRIER

Tender Coupler Yoke Follower Carriers

3 ^

4U248-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer, and bending end of coupler yoke fol-
lower carrier after iron has been cut and delivered at bulldozer.

Bulldozer.

Per first carrier :

1-As per sketch No. 2

Pei carrier after first one :

5- As per sketch No. 2

4U248— 4 Cut — Iron. Rato

Includes cutting iron at power shears for coupler yoke follower carrier.
Power shears. ^

Per piece cut :

1-As per sketch No.l

5- As per sketch No. 2

4U248-12 Lengthened or shortened. Rate

Includes lengthening or shortening coupler yoke follower carrier by draw-
ing out or upsetting same.

Forge.

Per first carrier :

1-As per sketch No. 1

5-As per sketch No. 2

Per carrier after first one :

9- As per sketch No.l

14-As per sketch No. 2

4U248-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, coupler
yoke follower carrier.

Forge.

Per first carrier :

1-As per sketch No. 2

Per carrier after first one :

5- As per sketch No. 2

TENDER FRAME
Drawbar Yoke Follower Carrier

532

BLACKSMITH SHOP SCHEDULES.

Tender Frame

DRAWBAR YOKE FOLLOWER CARRIER

4U248-18 Straightened Rate

Includes straightening old coupler yoke follower carrier when same has be-
come bent.

Forge.

Per first carrier :

1- As per sketch No. 1

2- As per sketch No. 2

Per carrier after first one :

5- As per sketch No.l

6- As per sketch No. 2

4U248-21 Welded (break). ' Rate

Includes doing necessary scarfing, welding break in coupler yoke follower
carrier, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2 -

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U248-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in coupler yoke follower
carrier, dressing and finishing over weld complete.

Forge.

Per first place repaired :

9-As per sketch No.l

10-As per sketch No. 2

Per place repaired after first one :

14- As per sketch No.l

15- As per sketch No. 2 .

TENDER FRAME

Drawbar Yoke Follower Carrier

TENDER.

533

Tender Frame

DRAWBAR YOKE FOLLOWER CARRIER

4U248-21 Welded (holes plugged). Rate

Includes making plug, welding, same- m hole in coupler yoke follower car-
rier, dressing and finishing over weld complete.

Forge.

Per first hole :

20- As per sketch No.l

21- As per sketch No. 2

• Per hole after first one :

24- As per sketch No. 1

25- As per sketch No. 2

4U248-21 Welded (new lip). Rate

Includes welding necessary stock on end of coupler yoke follower carrier,
dressing and finishing lip to shape complete.

Forge.

Per first lip :

28-As per sketch No. 2

Per lip after first one :

30-As per sketch No. 2

TENDER FRAME
Drawbar Yoke Follower Carrier

534

BLACKSMITH SHOP SCHEDULES.

Tender Frame

IRON— CHAFING, FRONT

4U260-13 Made. Rate

Includes getting material, blocking out, forging and finishing tender frame
front chafing-iron complete.

Steam hammer :

1- Per first chafing-iron

2- Per chafing-iron after first one

Forge :

3- Per first chafing-iron

4- Per chafing-iron after first one

4U260-18 Straightened. Rate

Includes straightening old tender frame front chafing-iron when same has
become bent.

Steam hammer :

1- Per first chafing-iron

2- Per chafing-iron after first one

Forge :

3- Per first chafing-iron

4- Per chafing-iron after first one

4U260-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender frame front chafing-
iron, dressing and finishing over weld complete.

Forge :

1- Per first hole plugged

2- Per hole plugged after first one

TENDER FRAME
Iron, Front Chafing

TENDER.

535

Tender Frame

IRON— CHAFING, REAR

4U264-2 Bent. Rate

Includes getting material and bending tender frame rear chafing-iron.

Steam hammer :

1- Per first chafing-iron

2- Per chafing-iron after first one

Forge :

3- Per first chafing-iron

4- Per chafing-iron after first one

4U264-13 Made. Rate

Includes getting material, forging, bending and finishing tender frame rear
chafing-iron complete.

Steam hammer :

1- Per first chafing-iron

2- Per chafing-iron after first one

Forge :

3- Per first chafing-iron

4- Per chafing-iron after first one

TENDER FRAME

Iron, Rear Chafing

536

BLACKSMITH SHOP SCHEDULES.

Tender Frame

IRON— CHAFING, REAR

4U264-18 Straightened. Rate

Includes straightening old tender frame rear chafing-iron when same has be-
come bent.

Steam hammer :

1- Per first chafing-iron

2- Per chafing-iron after first one

Forge :

3- Per first chafing-iron

4- Per chafing-iron after first one

4U264-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender frame rear chafing-
iron, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U264-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender frame rear
chafing-iron, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U264-21 Welded (holes plugged). Rate...

Includes making plug, welding same in hole in tender frame rear chafing-
iron, dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

TENDER FRAME
Iron, Rear Chafing

TENDER.

537

Tender Frame

PIPE, STEAM— CLAMP

Tender F/pe C/i?/7?ps

4U280-2 Bend changed.

Includes changing bend in steampipe clamp.

Rate..

Forge.

Per first clamp :

1- A« per sketch No. 1, clamp A,

2- As per sketch No. 1, clamp B,

3- As per sketch No. 1, clamp C,

4- As per sketch No. 2, clamp A.

5- As per sketch No. 2, clamp B,

6- As per sketch No. 3, clamp A.

7- As per sketch No. 3, clamp B,

8- As per sketch No. 4, clamp A,

9- As per sketch No. 4, clamp B.

10- As per sketch No. 5, clamp A.

11- As per sketch No. 5, clamp B.

TENDER FRAME
Pipe, Steam — Clamp

538

BLACKSMITH SHOP SCHEDULES.

Tender Frame

PIPE, STEAM— CLAMP

Per clamp after first one :

15- As per sketch No. 1, clamp A

16- As per sketch No. 1, clamp B

17- As per sketch No. 1, clamp C

18- As per sketch No. 2, clamp A

19- As per sketch No. 2, clamp B

20- As per sketch No. 3, clamp A

21- As per sketch No. 3, clamp B

22- As per sketch No. 4, clamp A

23- As per sketch No. 4, clamp B

24- As per sketch No. 5, clamp A

25- As per sketch No. 5, clamp B

4U280-2 Bent (bulldozer). Rate

Includes changing dies in bulldozer and bending steampipe clamp.

Bulldozer :

30-Per first clamp, all sketches, Clamp A, B, or C

Per clamp after first one :

45- As per sketch No. 1, clamp A

46- As per sketch No. 1, clamp B

47- As per sketch No. 1, clamp C

48- As per sketch No. 2, clamp A

49- As per sketch No. 2, clamp B

50- As per sketch No. 3, clamp A

51- As per sketch No. 3, clamp B

52- As per sketch No. 4, clamp A

53- As per sketch No. 4, clamp B

54- As per sketch No. 5, clamp A

55- As per sketch No. 5, clamp B

4U280-4 Cut — Iron. Rate

Includes cutting iron at power shears for steampipe clamp.

Power shears :

1-Per piece cut

4U280-12 Lengthened or shortened. Rate

Includes lengthening or shortening steampipe clamp by drawing out or up-
setting same.

Forge.

Per first clamp :

1- As per sketch No. 1, clamp A

2- As per sketch No. 1, clamp B

3- As per sketch No. 1, clamp C

4- As per sketch No. 2, clamp A

5- As per sketch No. 2, clamp B

(Continued on page 539.)

TENDER FRAME

Pipe, Steam — Clamp

TENDER.

539

Tender Frame

PIPE, STEAM— CLAMP

(Continued from page 538.)

6- As per sketch No. 3, clamp A

7- As per sketch No. 3, clamp B

8- As per sketch No. 4, clamp A

9- As per sketch No. 4, clamp B

10- As per sketch No. 5, clamp A

11- As per sketch No. 5, clamp B

Per clamp after first one :

15- As per sketch No. 1, clamp A

16- As per sketch No. 1, clamp B

17- As per sketch No. 1, clamp C

18- As per sketch No. 2, clamp A

19- As per sketch No. 2, clamp B

2Q-As per sketch No. 3, clamp A

21- As per sketch No. 3, clamp B

22- As per sketch No. 4, clamp A

23- As per sketch No. 4, clamp B

24- As per sketch No. 5, clamp A

25- As per sketch No. 5, clamp B

4U280-13 Made complete (at forge). Rate

Includes getting material, bending, dressing and finishing complete, steam-
pipe clamp.

Forge.

Per first clamp :

1- As per sketch No. 1, clamp A

2- As per sketch No. 1, clamp B

3- As per sketch No. 1, clamp C

4- As per sketch No. 2, clamp A

5- As per sketch No. 2, clamp B

6- As per sketch No. 3, clamp A

7- As per sketch No. 3, clamp B

8- As per sketch No. 4, clamp A

9- As per sketch No. 4, clamp B

10- As per sketch No. 5, clamp A

11- As per sketch No. 5, clamp B

Per clamp after first one :

15- As per sketch No. 1, clamp A

16- As per sketch No. 1, clamp B

17- As per sketch No. 1, clamp C

18- As per sketch No. 2, clamp A

19- As per sketch No. 2, clamp B

20- As per sketch No. 3, clamp A

21- As per sketch No. 3, clamp B

22- As per sketch No. 4, clamp A

23- As per sketch No. 4, clamp B

24- As per sketch No. 5, clamp A

25- As per sketch No. 5, clamp B

TENDER FRAME
Pipe, Steam — Clamp

540

BLA.CKSMITH SHOP SCHEDULES.

Tender Frame

PIPE, STEAM— CLAMP

4U280-18 Straightened.

Rate.

Includes straightening old steampipe clamp when same has become bent or
twisted.

Forge.

Per first clamp :

1- As per sketch No.

2- As per sketch No.

3- As per sketch No.

4- As per sketch No.

5- As per sketch No.

6- As per sketch No.

7- As per sketch No.

8- As per sketch No.

9- As per sketch No.

10- As per sketch No.

11- As per sketch No.

1, clamp A.
1, clamp B,

1, clamp C,

2, clamp A,

2, clamp B,

3, clamp A,

3, clamp B,

4, clamp A,

4, clamp B,

5, clamp A,
5, clamp B,

Per clamp after first one :

15- As per sketch No. 1,

16- As per sketch No. 1,

17- As per sketch No. 1,

18- As per sketch No. 2,

19- As per sketch No. 2,

20- As per sketch No. 3,

21- As per sketch No. 3,

22- As per sketch No. 4,

23- As per sketch No. 4,

24- As per sketch No. 5,

25- As per sketch No. 5,

clamp A.
clamp B.
clamp C.
clamp A.
clamp B.
clamp A.
clamp B.
clamp A,
clamp B,
clamp A,
clamp B,

4U280-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in steampipe clamp, dressing
and finishing over weld complete.

Forge :

1-Per first hole, all sketches, clamp A, B, or C

15-Per hole after first one, all sketches, clamp A, B, or C

TENDER FRAME

Pipe, Steam — Clamp

TENDER.

541

Tender Frame

ROD, DRAFT

4U290-18 Straightened. Rate...

Includes straightening old tender frame draft rod when same has become
bent or twisted.

Steam hammer :

1- Per first rod

2- Per rod after first one

Forge :

3- Per first rod

4- Per rod after first one

4U290-20a Upset ends. Rate

Includes changing dies in forging machine and upsetting complete ends of
tender frame draft rods.

Machine :

1- Per first end

2- Per end after first one

4U290-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender frame draft rod,
dressing and finishing over weld complete.

Steam hammer :

1- Per first place repaired

2- Per place repaired after first one

Forge :

3- Per first place repaired

4- Per place repaired after first one

4U290-21 Welded (ends on body). Rate

Includes getting ends for tender frame draft rod, doing necessary scarfing,
welding end on rod, dressing and finishing over weld complete.

Steam hammer.

Per first end :

7- Body of rod If" or less

8- Body of rod If" to 2"

Per end after first one :

11- Body of rod If" or less

12- Body of rod If" to 2"

Forge.

Per first end :

16- Body of rod If" diameter or less

17- Body of rod If" to If"

18- Body of rod If" to 2"

Per end after first one ;

21- Body of rod If" diameter or less

22- Body of rod If" to If"

23- Body of rod If" to 2"

TENDER FRAME

Rod, Draft

542

BLACKSMITH SHOP SCHEDULES.

Tender Frame

ROD, TRUSS— PLATE

7e/7cfer Iri/ss /fed F/o/e

4U296-2 Bend changed. Rate

Includes changing bend in truss rod plate.

Forge :

1- Per first bend

2- Per bend after first one

4U296-4 Cut — Iron. Rate

Includes cutting iron at power shears for truss rod plate.

Power shears :

1-Per piece cut

4U296-12 Lengthened or shortened. Rate

Includes lengthening or shortening truss rod plate by drawing out or upsetting
same.

Forge :

1- Per first plate

2- Per plate after first one

4U296-13 Made. Rate

Includes getting material, bending, dressing and finishing truss rod plate
complete.

Steam hammer :

1- Per first plate

2- Pei plate after first one

Forge :

3- Per first plate

4- Per plate after first one

4U296-18 Straightened. Rate

Includes straightening old truss rod plate when same has become bent.
Forge :

1- Per first plate

2- Per plate after first one

TENDER FRAME
Rod, Truss — Plate

TENDER.

543

Tender Frame

ROD, TRUSS— PLATE

4U296-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in truss rod plate, dressing
and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U296-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in truss rod plate, dress-
ing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U296-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in truss rod plate, dressing and
finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

TENDER FRAME

Rod, Truss — Plate

544

BLACKSMITH SHOP SCHEDULES.

Tender Frame

ROD, TRUSS— WASHER

7e/?c/er Tri/ss fPocf¥asher

4U300-4 Cut — Iron. Rate

Includes cutting iron at power shears for truss rod washer.

Power shears :

1-Per piece cut

4U300-15 Punched. Rate

Includes changing dies and punching iron at power punch for truss rod
washer.

Power punch :

1- Per first hole

2- Pei hole after first one

4U300-18 Straightened. Rate

Includes straightening old truss rod washer when same has become bent.
Forge :

1- Per first washer

2- Per washer after first one

TENDER FRAME
^ Rod, Truss — Washei

TENDER,

545

Tender Frame

SILL, CENTER— BRACE

Tenc/er Ce/?rerSi// Brace

4U310-2 Bend changed. Rate

Includes changing bend in tender frame center sill brace.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U310-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending tender frame center sill
brace after same has been cut and delivered to bulldozer.

Bulldozer :

5- Per first brace

6- Pei brace after first one

4U310-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender frame center sill brace.
Power sheais :

1-Per piece cut

4U310-12 Lengthened or shortened. Rate

• Includes lengthening or shoitening tender frame center sill brace by draw-
ing out or upsetting same.

Forge :

1- Per first place lengthened or shortened

2- Per place lengthened or shoitened after first one

4U310-13 Made. Rate

Includes getting material, bending, dressing and finishing center sill brace
complete.

Forge ;

1- Per first brace

2- Per brace after first one

TENDER FRAME

Sill, Center — Brace

546

BLACKSMITH SHOP SCHEDULES.

Tender Frame

SILL, CENTER— BRACE

4U310-18 Straightened. Rate

Includes straightening old tender frame center sill brace when same has be-
come bent.

Forge :

1- Per first brace

2- Per brace after first one

4U310-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender frame center sill
brace, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one :

4U310-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender frame center
sill brace, dressing and finishing over weld complete.

Forge :

5- Per fiist place repaired

6- Per place repaired after first one

4U310-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender frame center sill brace,
'' dressing and finishing over weld complete.

Forge ;

9-Per first hole

10-Per hole after first one

TENDER FRAME
Sill, Center — Brace

TENDER.

547

Tender Frame

SILL, SIDE AND END— CONNECTION

Te/7c/erScfe<7/7(:/

4U318-2 Bend changed. Rate

Includes changing bend in side and end sill connection.

Forge :

1- Per first bend changed

2- Per bend changed after first one -

4U318-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending side and end sill connection
after same has been cut and delivered at bulldozer.

Bulldozer :

5- Per first connection

6- Per connection after first one

4U318— 4 Cut — Iron. Rate

Includes cutting iron at power shears for side and end sill connection.
Power shears :

1-Per piece cut

4U318-12 Lengthened or shortened. Rate

Includes lengthening or shortening side and end sill connection by drawing
out or upsetting same.

Forge :

1- Per first place lengthened or shortened

2- Per place lengthened or shortened after first one

4U318-13 Made. Rate

Includes getting material, bending, dressing and finishing complete side and
end sill connection.

Forge :

1- Per first connection

2- Per connection after first one

TENDER FRAME
Sill, Side and End — Connection

548

BLACKSMITH SHOP SCHEDULES.

Tender Frame

SILL, SIDE AND END— CONNECTION

4U318-18 Straightened. Rate

Includes straightening old side and end sill connection when same has be-
come bent.

Forge :

1- Per first connection

2- Per connection after first one •

4U318-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in side and end sill con-
nection, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U318-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in side and end sill con-
nection, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U318-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in side and end sill connection,
dressing and finishing over weld complete.

Forge :

9-Per first hole

10-Per hole after first one

TENDER FRAME

Sill, Side and End — Connection

TENDER.

549

Tender Frame

STEP, REAR

7&/7Cfer/7^rSi^e/?s

4U324-2 Bend changed.

Includes changing bend in tender rear step.
Forge :

1-Per first bend, all sketches

5-Per bend after first one, all sketches

4U324-2 Bent (at bulldozer). Rate

Includes changing dies and bending tender rear step at bulldozer after iron
has been cut and delivered.

Bulldozer :

9-Per first step, all sketches

14-Per step after first one, all sketches

4U324-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender rear step.

Power shears :

1-Per piece cut

4U324-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender rear step by drawing out or up-
setting same.

Forge :

1-Per first step, all sketches

7-Per step after first one, all sketches

TENDER FRAME

Step, Rear

550

BLACKSMITH SHOP SCHEDULES.

Tender Frame

STEP, REAR

4U324-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, tender
rear step.

Forge.

Per first step :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per step after fiist one :

7- As per sketch No. 1

8- As per sketch No. 2

9- As per sketch No. 3

4U324-18 Straightened. Rate

Includes straightening old tender rear step when same has become bent or
twisted.

Forge.

Per first step :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

Per step after first one :

7- As per sketch No. 1

8- As per sketch No.2

9- As per sketch No. 3

4U324-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender rear step, dress-
ing and finishing over weld complete.

Forge :

1-Per first place repaired, all sketches

7-Per place repaired after first one, all sketches

4U324-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender rear step, dress-
ing and finishing over weld complete.

Forge ;

12-Per first place repaired, all sketches

17-Per place repaired after first one, all sketches —

TENDER FRAME
Step, Rear

TENDER.

551

Tender Frame

STEP, REAR

4U324-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender rear step, dressing
and finishing over weld complete.

Forge :

23-Per first hole, all sketches

29-Per hole after first one, all sketches

TENDER FRAME

Step, Rear

552

BLACKSMITH SHOP SCHEDULES.

Tender Frame

TRANSOM (OR CHANNEL BAR)

4U334-18 Straightened. Rate

Includes straightening old tender frame transom or channel bar when same
has become bent or twisted.

Steam hammer :

1- Per first transom

2- Per transom after first one

TENDER FRAME

Transom (or Channel Bar)

TENDER.

553

Tender Frame

TRANSOM— BRACKET, FRONT

Te/7c/er/777/77erro/?r

4U338-18 Straightened. Rate

Includes straightening old tender frame front transom bracket when same
has become bent or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

4U338-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender frame front transom
bracket, dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one -

TENDER FRAME
Transom — Bracket, Front

554

BLACKSMITH SHOP SCHEDULES.

Tender Tank
BRACE

4U380-2 Bend changed. Rate

Includes changing bend in tender tank brace.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U380-4 Cut — Iron. Rate

Includes cutting iron for tender tank brace.

Power shears :

1-Per piece cut

4U380-13 Made. Rate

Includes getting material for tender tank brace, bending, dressing and fin-
ishing ends complete.

Forge :

1- Per first brace

2- Per brace after first one

4U380-18 Straightened. Rate

Includes straightening old tender tank brace when same has become bent or
twisted.

Forge :

1- Per first brace

2- Per brace after first one

TENDER TANK
Brace

TENDER.

555

Tender Tank
BRACE

4U380-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender tank brace, dressing
and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

TENDER TANK

Brace

556

BLACKSMITH SHOP SCHEDULES.

Tank

COAL PUSHER CYLINDER— LUG, FASTENING

TencferCoa/PosherCyMerfosTen/n^Lc/gs

9

/ Jl.

4U388-6 Dressed.

Rate.

Includes dressing and finishing complete, coal pusher cylinder fastening lug
after same has been bent or forged.

Forge.

Per first lug :

1- As per sketch No. 1

2- As per sketch No. 2

Per lug after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U388-18 Straightened. Rate

Includes straightening old coal pusher cylinder fastening lug when same has
become bent.

Forge.

Per first lug :

1- As per sketch No. 1

2- As per sketch No. 2

Per lug after first one :

5- As per sketch No.l

6- As per sketch No. 2

4U388-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in coal pusher cylinder
fastening lug, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TENDER TANK

Coal Pusher Cylinder — Fastening Lug

TENDER.

557

Tender Tank

COAL PUSHER CYLINDER— LUG, FASTENING

4U388-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in coal pusher cylinder fastening
lug, dressing and finishing over weld complete.

Forge.

Per first hole :

9-As per sketch No.l

10- As per sketch No. 2

Per hole after first one :

13- As per sketch No.l

14- As per sketch No. 2

TENDER TANK

Coal Pusher Cylinder — Fastening Lug

558

BLACKSMITH SHOP SCHEDULES.

Tender Tank

COAL PUSHER CYLINDER, PISTON ROD

T^tyerC^ia//^5/7erCy///7der/^/s/^/7/foc/

4U398-9 Forged (boss end). Rate.....

Includes getting material, blocking out and forging complete, boss end of
coal pusher cylinder piston rod, ready for welding on body of rod.

Steaih hammer :

1- Per first end

2- Per end after first one

Forge :

3- Per first end

4- Per end after first one

4U398-12 Lengthened or shortened. Rate

Includes lengthening or shorteniiig coal pusher cylinder piston rod by draw-
ing out or upsetting same.

Forge :

1- Per first piston rod

2- Per piston rod after first one

4U398-13 Made. Rate

Includes getting material, getting boss end when same has been forged, weld-
ing, dressing and finishing complete, coal pusher cylinder piston rod.

Forge :

1- Per first piston rod

2- Per piston rod after first one

4U398-18 Straightened. Rate

Includes straightening old coal pusher cylinder piston rod when same has
become bent.

Forge :

1- Per first piston rod

2- Per piston rod after first one

TENDER TANK

Coal Pusher Cylinder — ^Piston Rod

TENDER.

559

Tender Tank

COAL PUSHER CYLINDER, PISTON ROD

4U398-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in coal pusher cylinder
piston rod, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U398-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in coal pusher cylinder
piston rod, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U398-21 Welded (new end). Rate

Includes getting new boss end after same has been forged, doing necessary
scarfing, welding end on body of coal pusher cylinder piston rod, dressing
and finishing over weld complete.

Forge :

9-Per first end

10-Per end after first one

4U398-21 Welded (new piston end). Rate

Includes cutting off old end of coal pusher piston rod, welding on necessary
stock for new piston end, dressing and finishing complete.

Forge :

13- Per first end

14- Per end after first one

TENDER TANK
Coal Pusher Cylinder — Piston Rod

560

BLACKSMITH SHOP SCHEDULES,

Tender Tank

COAL PUSHER CYLINDER, PISTON ROD— END, BOSS

4U400-13 Made (at forging machine). Rate

Includes changing dies in forging machine and forging complete, boss end
of coal pusher cylinder piston rod complete after material has been delivered
to machine.

Forging machine :

1- Per first end

2- Per end after first one

TENDER TANK

Coal Pusher Cylinder — Piston Rod Boss End

TENDER.

561

Tender Tank

COAL PUSHER— DOOR, BOTTOM— HINGE

4U410-2 Bend changed. Rate

Includes changing bend in coal pusher bottom door hinge.

Forge.

Per first bend changed :

1-As per sketch No. 1

Per bend changed after first one :

5- As per sketch No. 1

4U410-6 Dressed. Rate

Includes bending, dressing ends and finishing complete, coal pusher bottom
door hinge after same has been forged.

Forge.

Per first hinge :

1- As per sketch No. 1

2- As per sketch No. 2

Per hinge after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U410-9 Forged. Rate

Includes getting material, blocking out and forging coal pusher bottom door
hinge complete, ready for dressing.

Steam hammer.

Per first hinge :

1- As per sketch No. 1

2- As per sketch No. 2

Per hinge after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TENDER TANK
Coal Pusher — Bottom Door Hinge

562

BLACKSMITH SHOP SCHEDULES.

Tender Tank •

COAL PUSHER— DOOR, BOTTOM— HINGE

Forge.

Per first hinge :

9-As per sketch No. 1

10- As per sketch No. 2

Per hinge after first one :

13- As per sketch No. 1

14- As per sketch No. 2

4U410-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, bending, dressing and
finishing coal pusher bottom door hinge complete.

Forge.

Per first hinge :

17- As per sketch No. 1

18- As per sketch No. 2

Per hinge after first one :

21-As per sketch No.l

23- As per sketch No. 2

4U410-12 Lengthened or shortened. Rate

Includes lengthening or shortening coal pusher bottom door hinge by draw-
ing out or upsetting same.

Forge.

Per first hinge :

1- As per sketch No.l

2- As per sketch No. 2 .

Per hinge after first one :

5- As per sketch No.l

6- As per sketch No. 2

4U410-18 Straightened. Rate

Includes straightening old coal pusher bottom door hinge when same has
become bent.

Forge.

Per first hinge :

1- As per sketch No. 1

2- As per sketch No. 2

Per hinge after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TENDER TANK

Coal Pusher — Bottom Door Hinge

TENDER.

563

Tender Tank

COAL PUSHER— DOOR, BUTTON— HINGE

4U410-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in coal pusher bottom door
hinge, dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U410-21 Welded (crack). Rate

Includes making dutchman, wel ling same in crack in coal pusher bottom
door hinge, dressing and finishing over weld complete.

Forge.

Per first place repaired :

9- As per sketch No. 1

10- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No.l

16- As per sketch No. 2

4U410-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in coal pusher bottom door
hinge, dressing and finishing over weld complete.

Forge.

Per first hole :

21- As per sketch No. 1, hole in boss end

22- As per sketch No. 1, hole in body of hinge

23- As per sketch No. 2, hole in boss end

24- As per sketch No. 2, hole in body of hinge

Per hole after first one :

30- As per sketch No. 1, hole in boss end

31- As per sketch No. 1, hole in body of hinge

32- As per sketch No. 2, hole in boss end

' 33-As per sketch No. 2, hole in body of hinge ^

TENDER TANK
Coal Pusher — Bottom Door Hinge

564

BLACKSMITH SHOP SCHEDULES.

Tender Tank

HAND HOLD

Tender Tank Hand Holds

a

/

4U450-1 Balled up. Rate

Includes changing dies in machine and balling up ends of tender tank hand
hold ready for forging.

Machine :

1- Per first end

2- Per end after first one

4TJ450-4 Cut — Iron. Rate

Includes cutting iron for tender tank hand holds at power shears.

Power shears :

1-Per piece cut

4U450-6 Dressed. Rate..

Includes welding top end of hand hold on body of hand hold as shown in
sketch No. 2, or doing necessary bending and dressing of hand holds, as per
sketches Nos. 1 and 2, and finishing same complete.

Forge.

Per first hand hold ;

1- As per sketch No.l

2- As per sketch No. 2

TENDER TANK
Hand Hold

TENDER.

565

Tender Tank

HAND HOLD

Per hand hold after first one :

3- As per sketch No. 1

4- As per sketch No. 2

4U450-9 Forged (ends). Rate

Includes changing dies in machine and forging ends of tender tank hand holds
complete, after iron has been delivered to machine with ends balled up.

Machine.

Per first hand hold :

1- As per sketch No. 1

2- As per sketch No. 2

Per hand hold after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U450-9 Forged (end at forge). Rate

Includes getting material, blocking out and forging complete, end of tender
tank hand hold.

Forge.

Per first end ;

9-As per sketch No.l

10- As per sketch No. 2, top end

11- As per sketch No. 2, bottom end.

Per end after first one :

15- As per sketch No.l

16- As per sketch No. 2, top end

17- As per sketch No. 2, bottom end

4U450-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender tank hand hold by drawing out
or upsetting same.

Forge.

Per first hand hold :

1- As per sketch No.l

2- As per sketch No. 2

Per hand hold after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TENDER TANK

Hand Hold

566

BLACKSMITH SHOP SCHEDULES.

Tender Tank

HAND HOLD

4U450-13 Made complete (at forge). Rate.'.

Includes getting material, forging ends, doing necessary welding, dressing
and finishing tender tank hand hold complete.

Forge.

Per first hand hold :

1- As per sketch No. 1

2- As per sketch No. 2

Per hand hold after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U460-18 Straightened. Rate

Includes straightening old tender tank hand hold when same has become
bent or twisted.

Forge.

Per first hand hold :

1- As per sketch No. 1

2- As per sketch No. 2

Per hand hold after first one :

5- As per sketch No.l

6- As per sketch No. 2

4U450-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender tank hand hold,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No.2

Per place repaired after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U450-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender tank hand hold,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

9-As per sketch No. 1

10- As per sketch No. 2

TENDER TANK
Hand Hold

TENDER.

567

Tender Tank

HAND HOLD

Per place repaired after first one :

13- As per sketch No. 1

14r-As per sketch No. 2 . . .

4U450-21 Welded (new end). Rate

Includes getting new end of tender tank hand hold after end has been forged,
welding same on body of hand hold, dressing and finishing complete.

Forge.

Per first end :

16- As per sketch No. 1

17- As per sketch No. 2, top end

18- As per sketch No. 2, bottom end. .

Per end after first one :

22- As per sketch No.l

23- As per sketch No. 2, top end .*...

24- As per sketch No. 2, bottom end

TENDER TANK

Hand Hold

568

BLACKSMITH SHOP SCHEDULES.

Tender Tank

HEADLIGHT BRACKET

7e/7c ^r7a/?/f^ead//^/7f3ra cnet

i n °

4U460-2 Bent (at bulldozer). Rate

Includes changing dies in machine and bending complete tender tank head-
light bracket after iron for same has been cut and delivered to machine.

Forge :

1- Per first bracket

2- Per bracket after first one

4U460-2 Bend changed. Rate

Includes changing bend in headlight bracket.

Forge :

5- Per first bend changed

6- Per bend changed after first one

4U460-4 Cut — Iron. Rate

Includes cutting iron for tender tank headlight bracket at power shears.
Power shears :

1-Per piece cut

4U460-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender tank headlight bracket by drawing
out or upsetting same.

Forge :

1- Per first bracket

2- Per bracket after first one

4U460-13 Made. Rate

Includes getting material, bending, dressing and finishing tender tank head-
light bracket complete.

Forge :

1- Per first bracket

2- Per bracket after first one

TENDER TANK

Headlight Bracket

TENDER.

569

Tender Tank

HEADLIGHT BRACKET

4U460-18 Straightened. Rate

Includes straightening old tender tank headlight bracket when same has
become bent or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one r

4U460-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender tank headlight
bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U460-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender tank headlight
bracket, dressing and finishing over weld complete.

Forge :

5- Per first place repaired

6- Per place repaired after first one

4U460-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender tank headlight bracket,
dressing and finishing over weld complete.

Forge :

9-Per first hole plugged

10-Per hole plugged after first one

TENDER TANK

Headlight Bracket

570

BLACKSMITH SHOP SCHEDULES.

Tender Tank
LADDER

7e/?aier 7a/?/f loo/o/ers

4U470-2 Bend changed. Rate

Includes changing bend in tender tank ladder.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U470-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender tank ladder by drawing out or
upsetting same.

Forge :

1- Per first ladder

2- Per ladder after first one

TENDER TANK
Ladder

TENDER.

571

Tender Tank
LADDER

4U470-13 Made complete (at forge). Rate

Includes getting material, dressing and finishing complete, tender tank ladder.
Forge.

Per first side of ladder :

1- As per sketch No. 1

2- As per sketch No. 2 .... 7

Per side of ladder after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U470-18 Straightened. Rate

Includes straightening old tender tank ladder when same has become bent.
Forge.

Per first ladder :

1- As per sketch No. 1

2- As per sketch No. 2

Per ladder after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4U470-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender tank ladder, dress-
ing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

5- As per sketch No.l

6- As per sketch No. 2

4U470-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender tank ladder, dressing
and finishing over weld complete.

Forge.

Per first hole :

10- As per sketch No. 1

11- As per sketch No. 2

Per hole after first one :

14- As per sketch No. 1

15- As per sketch No. 2

TENDER TANK

Ladder

572

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, OIL AND WATER— BRACKET, CONNECTING

^ l^/76^erO//i7/7/^ heater

4U490-2 Bent (at bulldozer). Rate

Includes changing dies in machine and bending complete, tender oil and
water tank connecting bracket, after iron for same has been cut and de-
livered to machine.

Bulldozer :

1- Per first bracket

2- Per bracket after first one

4U490-2 Bend changed. Rate

Includes changing bend in tender oil and water tank connecting bracket.
Forge :

5- Per first bend changed

6- Per bend changed after first one

4U490-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, tender
oil and water tank connecting bracket.

Forge ;

1- Per first bracket

2- Per bracket after first one

4U490-18 Straightened. Rate

Includes straightening old tender oil and water tank connecting bracket
when same has become bent or twisted.

Forge :

1- Per first bracket

2- Per bracket after first one

TENDER TANK

Tank, Oil and Water, Connecting Bracket

TENDER.

573

Tender Tank

TANK, OIL AND WATER— BRACKET, CONNECTING

4U490-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender oil and water
connecting bracket, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U490-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender oil and water tank
connecting bracket, dressing and finishing over weld complete.

Forge :

5- Per first hole plugged

6- Per hole plugged after first one

TENDER TANK

Tank, Oil and Water, Connecting Bracket

574

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, OIL— ANCHOR

Tender OH TanH Hnchor

4U496-2 Bend changed. Rate

Includes changing bend in tender oil tank anchor.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U496-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending tender oil tank anchor after
iron has been cut and delivered to bulldozer.

Bulldozer :

5- Per first anchor

6- Per anchor after first one

4U496-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender oil tank anchor.

Power shears :

1-Per piece cut

4U496-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender oil tank anchor by drawing out or
upsetting same.

Forge :

1- Per first anchor

2- Per anchor after first one

4U496-13 Made. Rate

Includes getting material, bending, dressing and finishing complete, tender
oil tank anchor.

Forge ;

1- Per first anchor "

2- Per anchor after first one

TENDER TANK

Tank, Oil — Anchor

TENDER,

575

Tender Tank -

TANK, OIL— ANCHOR

4U496-18 Straightened. Rate

includes straightening old tender oil tank anchor when same has become
bent or twisted.

Forge :

1- Per first anchor

2- Per anchor after first one

4U496-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender oil tank anchor,
dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U496-21 Welded (holes plugged). Rate.

Includes making plug, welding same in hole in tender oil tank anchor, dress-
ing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

TENDER TANK
Tank, Oil — Anchor

576

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, OIL— ANCHOR LUG

7^/7cferO//oriVareP

7a/7/fA7r?cJ7orLug

4U500-9 Forged and dressed.

Rate.

Includes getting material, blocking out, forging, dressing and finishing com-
plete, tender oil tank anchor lug.

Steam hammer :

1- Per first lug :

2- Per lug after first one.

Forge :

5- Per first lug ;

6- Per lug after fiist one

4U500-18 Straightened. Rate

Includes straightening old tender oil tank anchor lug when same has become
bent or twisted.

Forge :

1- Per first lug

2- Per lug after first one

4U500-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender oil tank anchor lug,
dressing and finishing over weld complete.

Forge :

1- Per first hole

2- Per hole after first one

TENDER TANK

Tank, Oil — Anchor Lug

TENDER.

577

Tender Tank

TANK, OIL— HEATER CLAMP

7e/7Cfer 0/7 Tc/r/Zf //eo/er 0/(7//?p

4U510-2 Bent (at bulldozer). Rate

Includes changing dies in machine and bending complete, tender oil tank
heater clamp after iron for same has been cut and delivered to machine.

Bulldozer :

1- Per first half of clamp

2- Per half of clamp after first half

4U510-2 Bend changed. Rate

Includes changing bend in tender oil tank heater clamp.

Forge :

5- Per first bend changed

6- Per bend changed after first one

4U510-4 Cut — Iron. Rate

Includes cutting iron for tender oil tank heater clamp at power shears.
Power shears :

1-Per piece cut

4U510-9 Made. Rate

Includes getting mateiial, bending, dressing and finishing tender oil tank
heater clamp complete.

Forge :

1- Per first half of clamp

2- Per half of clamp after first half

TENDER TANK
Tank, Oil — Heater Clamp

578

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, OIL— HEATER CLAMP

4U610-18 Straightened. Rate

Includes straightening old tender oil tank heater clamp when same has be-
come bent or twisted.

Forge ;

1- Per first half of clamp

2- Per half of clamp after first half

4U510-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender oil tank heater clamp,
dressing and finishing over weld complete.

Forge :

1- Per first hole plugged A..

2- Per hole plugged after first one

TENDER TANK

Tank, Oil — Heater Clamp

TENDER.

579

Tender Tank

TANK, OIL— HEATER CLAMP END

4U614-2 Bend changed. Rate

Includes changing bend in tender oil tank heater clamp end.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U614-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender oil tank heater clamp end.
Power shears :

1-Per first piece cut

4U614-13 Made. Rate

Includes getting material, bending, dressing and finishing tender oil tank
heater clamp end complete.

Forge :

1- Per first end

2- Per end after first one

4U514-18 Straightened. Rate

Includes straightening old tender oil tank heater clamp end when same has
become bent or twisted.

Forge :

1- Per first end

2- Per end after first one

4U614-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender oil tank heater clamp
end, dressing and finishing over weld complete.

Forge ;

1- Per first hole

2- Per hole after first one

TENDER TANK
Tank, Oil — Heater Clamp End

580

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, WATER-ANCHOR LUG

4U520-13 Made complete. Rate

Includes getting material, blocking out, forging, dressing and finishing to
shape, tender water tank anchor lug complete.

Steam hammer :

1- Per first lug

2- Per lug after first one

Forge :

3- Per first lug

4- Per lug after first one

4U520-18 Straightened. Rate

Includes straightening old tender water tank anchor lug when same has
become bent or twisted.

Forge :

1- Per first lug

2- Per lug after first one

TENDER TANK

Tank, Water — Anchor Lug

TENDER.

581

Tender Tank

TANK, WATER— LEG STEP

Tender TnnH Water Le^ Step

4U630-2 Bend changed. Rate

Includes changing bend in tender water tank leg step.

Forge :

1- Per first bend changed

2- Per bend changed after first one

4U530-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending tender water tank leg
step after iron has been cut and delivered to bulldozer.

Bulldozer :

5- Per first step

6- Per step after first one

4U530-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender water tank leg step.

Power shears :

1-Per piece cut

4U530-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender water tank leg step by drawing
out or upsetting same. ’

Forge :

1- Per first step

2- Per step after first one

4U530-13 Made. Rate

Includes getting material, bending, dressing and finishing tender water tank
leg step complete.

Forge :

1- Per first step

2- Per step after first one

TENDER TANK
Tank, Water — Leg Step

582

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, WATER— LEG STEP

4U630-18 Straightened. Rate

Includes straightening old tender water tank leg step when same has be-
come bent or twisted.

Forge :

1- Per first step

2- Per step after first one

4U530-21 Welded (crack). Rate ...

Includes making dutchman, welding same in crack in tender water tank leg
step, dressing and finishing over weld complete.

Forge :

1- Per first place repaired

2- Per place repaired after first one

4U530-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender water tank leg step,
dressing and finishing over weld complete.

Forge :

5- Per first hole

6- Per hole after first one

TENDER TANK

Tank, Water — Leg Step

TENDER.

583

Tender Tank

TANK, WATER— SIPHON CLAMP

4U640-2 Bend changed. Rate.

Includes changing bend in water tank siphon clamp.

Forge.

Per first clamp : ^

1- As per sketch No. 1, either half

2- As per sketch No. 2, top half

3- As per sketch No. 2, bottom half

4- As per sketch No. 3, top half

5- As per sketch No. 3, bottom half

6- As per sketch No. 4, top half

7- As per sketch No. 4, bottom half

Per clamp after first one :

11- As per sketch No. 1, either half

12- As per sketch No. 2, top half

13- As per sketch No. 2, bottom half

14- As per sketch No. 3, top half

15- As per sketch No. 3, bottom half

16- As per sketch No. 4, top half

17- As per sketch No. 4, bottom half

TENDER TANK
Tank, Water — Siphon Clamp

584

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, WATER— SIPHON CLAMP

4U540-2 Bent (bulldozer). Rate

Includes changing dies in bulldozer and bending water tank siphon clamp
complete, after iron has been cut and delivered to bulldozer.

Bulldozer :

20-Per first clamp,. all sketches, either half

Per clamp after first one :

30- As per sketch No. 1, either half

31- As per sketch No. 2, top half

32- As per sketch No. 2, bottom half

33- As per sketch No. 3, top half

34- As per sketch No. 3, bottom half

35- As per sketch No. 4, top half

4U540-4 Cut — Iron. Rate

Includes cutting iron at power shears for water tank siphon clamp.

Power shears :

1-Per piece cut

4U540-12 Lengthened or shortened. Rate.....

Includes lengthening or shortening water tank siphon clamp by drawing
out or upsetting same.

Forge.

Per first clamp :

1- As per sketch No. 1, either half

2- As per sketch No. 2, top half

3- As per sketch No. 2, bottom half

4- As per sketch No. 3, top half

5- As per sketch No. 3, bottom half

• 6- As per sketch No. 4, top half

7- As per sketch No. 4, bottom half

Per clamp after first one ;

11- As per sketch No. 1, either half

12- As per sketch No. 2, top half

13- As per sketch No. 2, bottom half

14- As per sketch No. 3, top half

15- As per sketch No. 3, bottom half

16- As per sketch No. 4, top half

17- As per sketch No. 4, bottom half

TENDER TANK

Tank, Water — Siphon Clamp

TENDER.

585

Tender Tank

TANK, WATER— SIPHON CLAMP

4U640-13 Made complete (at forge). Rate

Includes getting material, bending, dressing and finishing complete, water
tank siphon clamp.

Forge.

Fer first clamp :

1- As per sketch No. 1

2- As per sketch No. 2, top half

3- As per sketch No. 2, bottom half

4^As per sketch No. 3, top half

5- As per sketch No. 3, bottom half

6- As per sketch No. 4, top half

7- As per sketch No. 4, bottom half

Per clamp after first one :

11- As per sketch No. 1

12- As per sketch No. 2, top half

13- As per sketch No. 2, bottom half

14- As per sketch No. 3, top half

15- As per sketch No. 3, bottom half

16- As per sketch No. 4, top half

17- As per sketch No. 4, bottom half

4U540-18 Straightened. Rate

Includes straightening old water tank siphon clamp when same has be-
come bent or twisted.

Forge.

Per first clamp :

1- As per sketch No. 1

2- As per sketch No. 2, top half

3- As per sketch No. 2, bottom half

4- As per sketch No. 3, top half

5- As per sketch No. 3, bottom half

6- As per sketch No. 4, top half

7- As per sketch No. 4, bottom half

Per clamp after first one :

11- As per sketch No. 1

12- As per sketch No. 2, top half

13- As per sketch No. 2, bottom half

14- As per sketch No. 3, top half

15- As per sketch No. 3, bottom half

16- As per sketch No. 4, top half

17- As per sketch No. 4, bottom half

TENDER TANK
Tank, Water — Siphon Clamp

586

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, WATER— SIPHON CLAMP

4U540-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in water tank siphon clamp,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No.l

2- As per sketch No. 2, top half

3- As per sketch No. 3, bottom half

4- As per sketch No. 4, bottom half

Per clamp after first one :

7- As per sketch No. 1

8- As per sketch No. 2, top half

9- As per sketch No. 3, bottom half

10-As per sketch No. 4, bottom half

4U540-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in water tank siphon
clamp, dressing and finishing over weld complete.

Forge.

Per first place repaired :

21-As per sketch No. 3, bottom half

23-As per sketch No. 4, bottom half

Per place repaired after first one :

26-As per sketch No. 3, bottom half

29-As per sketch No. 4, bottom half

4U540-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in water tank siphon clamp,
dressing and finishing over weld complete.

Forge.

Per first hole :

35- As per sketch No. 1

36- As per sketch No. 2, top half

37- As per sketch No. 2, bottom half

38- As per sketch No. 3, top half

39- As per sketch No. 3, bottom half

40- As per sketch No. 4, top half

41- As per sketch No. 4, bottom half

Per hole after first one :

46- As per sketch No.l

47- As per sketch No. 2, top half

48- As per sketch No. 2, bottom half.

49- As per sketch No. 3, top half

50- As per sketch No. 3, bottom half

51- As per sketch No. 4, top half

52- As per sketch No. 4, bottom half

TENDER TANK

Tank, Water — Siphon Clamp

TENDER.

587

Tender Tank

TANK, WATER— VALVE STEM

7e/76/er//a/er 7a/?/f 3/e/??

7er?c/er heater 7ar?/fKa/k'e 5 ten?

4U550-6 Dressed. Rate

Includes cutting jaw, dressing and finishing water tank valve stem complete.
Forge.

Per first stem :

1- As per sketch No. 1

2- As per sketch No. 2, when jaw is cut

3- As per sketch No. 2, when jaw is not cut

Per stem after first one :

7- As per sketch No. 1

8- As per sketch No. 2, when jaw is cut

9- As per sketch No. 2, when jaw is not cut

4U650-9 Forged. Rate

Includes getting material, blocking out and forging ends of water tank valve
stem complete, ready for dressing.

Steam hammer.

Per first stem :

1- As per sketch No. 1

2- As per sketch No. 2, when jaw is cut

3- As per sketch No. 2, when jaw is not cut

Per stem after first one :

7- As per sketch No. 1

8- As per sketch No. 2, when jaw is cut

9- As per sketch No. 2, when jaw is not cut

Forge.

Per first stem :

11- As per sketch No. 1

12- As per sketch No. 2, when jaw is cut .•

13- As per sketch No. 2, when jaw is not cut

Per stem after first one :

17- As per sketch No. 1

18- As per sketch No. 2, when jaw is cut

19- As per sketch No. 2, when jaw is not cut

TENDER TANK
Tank, Water — Valve Stem

588

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, WATER— VALVE STEM

4U560-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing water tank valve stem complete.

Forge.

Per first stem :

23-As per sketch No. 1

24r-As per sketch No. 2, when jaw is cut

25-As per sketch No. 2, when jaw is not cut

Per stem after first one :

28- As per sketch No. 1

29- As per sketch No. 2, when jaw is cut

30- As per sketch No. 2, when jaw is not cut

4U660-12 Lengthened or shortened. Rate

Includes lengthening or shortening water tank valve stem by drawing out or
upsetting same.

Forge.

Per first stem :

1- As per sketch No. 1

2- As per sketch No. 2

Per stem after first one :

7- As per sketch No. 1

8- As per sketch No. 2

4U550-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in water tank valve stem,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

1- As per sketch No. 1

2- As per sketch No. 2

Per place repaired after first one :

7- As per sketch No. 1

8- As per sketch No. 2

TENDER TANK

Tank, Water — Valve Stem

TENDER.

589

Tender Tank

TANK, WATER— VALVE STEM

4U550-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in water tank valve stem,
dressing and finishing over weld complete.

Forge.

Per first place repaired :

12- As per sketch No. 1

13- As per sketch No. 2

Per place repaired after first one :

15- As per sketch No. 1

16- As per sketch No. 2 ^

4U550-21 Welded (new end). Rate

Includes getting new jaw end after same has been forged, doing necessary
scarfing, welding jaw end on body of water tank valve stem, dressing and
finishing over weld complete.

Forge.

Per first jaw end :

21- As per sketch No. 1 !

22- As per sketch No. 2

Per jaw end after first one :

24- As per sketch No. 1

25- As per sketch No. 2

4U550-21 Welded (new boss, square or round end). Rate

Includes welding required stock on old water tank valve stem, dressing and
finishing complete boss end, square end or round end.

Forge.

Per first end :

28- As per sketch No. 1, boss end

29- As per sketch No. 1, square end

30- As per sketch No. 2, round end

Per end after first one :

35- As per sketch No. 1, boss end

36- As per sketch No. 1, square end

37- As per sketch No. 2, round end

TENDER TANK
Tank, Water — Valve Stem

59Q

BLACKSMITH SHOP SCHEDULES.

Tender Tank

TANK, WATER— VALVE STEM— END, JAW

4U554-2 Bent. Rate

Includes changing dies in bulldozer and bending jaw end of water tank valve
stem after iron has been cut and delivered to bulldozer.

Bulldozer.

Per first end :

1-As per sketch No. 2

Per end after first one :

5-As per sketch No. 2

4U564-4 Cut — Iron. Rate

Includes cutting iron at power shears for water tank valve stem jaw end.
Power shears :

1-Per piece cut

4U664-6 Dressed. Rate

Includes dressing and finishing complete, water tank valve stem jaw end
after same has been forged.

Forge.

Per first end :

1-As per sketch No. 2, when jaw is cut

3- As per sketch No. 2, when jaw is not cut

Per end after first one :

5- As per sketch No. 2, when jaw is cut

7- As per sketch No. 2, when jaw is not cut

4U664-9 Forged. Rate

Includes getting material, blocking ’^out and forging complete, water tank
valve stem jaw end.

Steam hammer.

Per first end :

1-As per sketch No. 2, when jaw is cut

3-As per sketch No. 2, when jaw is not cut

Per end after first one :

5-As per sketch No. 2, when jaw is cut

7- As per sketch No. 2, when jaw is not cut

Forge.

Per first end :

9- As per sketch No. 2, when jaw is cut

11-As per sketch No. 2, when jaw is not cut

Per end after first one :

13-As per sketch No. 2, when jaw is cut

15-As per sketch No. 2, when jaw is not cut

TENDER TANK

Tank, Water — Valve Stem Jaw End

TENDER.

591

Tender Tank

TANK, WATER— VALVE STEM— END, JAW

4U664-9 Forged (at forging machine). Rate

Includes changing dies in forging machine and forging complete, water tank
valve stem jaw end after iron has been cut, bent, punched and delivered at
machine.

Forging machine.

Per first jaw end :

17- As per sketch No. 2

Per jaw end after first one :

19- As per sketch No. 2

TENDER TANK
nk. Water — Valve Stem Jaw End

592

BLACKSMITH SHOP SCHEDULES.

Tender Truck
AXLE

lender irucK Wheel Hxie

4U600-9 Forged. Rate

Includes forging down tender truck axle to reduce same in size.

Steam hammer :

1- Per first axle

2- Per axle after first one

4U600-12 Lengthened. Rate

Includes forging out and lengthening tender truck axle to size, complete.
Steam hammer :

1- Per first axle

2- Per axle after first one

4U600-13 Made (from slabs). Rate

Includes getting slabs, forging, dressing and finishing tender truck axle.
Steam hammer.

Per first axle :

1- Axle 5 in. diameter or less

2- Axle more than 5 in. to 6 in. diameter

Per axle after first one :

3- Axle 5 in. diameter or less

4- Axle more than 5 in. to 6 in. diameter

TENDER TRUCK
Axle

TENDER.

593

Tender Truck

AXLE SLAB

4U608-13 Made (from scrap iron). Rate

Includes getting scrap iron after same has been piled, taking heat and forging
pile to form slab for tender truck axle slab.

Steam hammer :

1- Per first slab

2- Per slab after first one

4U608-13 Made (single slab) (from old axle). Rate

Includes forging from old car axle single slab for tender truck axle.

Steam hammer :

7- Per first slab

8- Per slab after first one

4U608-13 Made (double slabs) (from old axles). Rate

Includes forging from old car axles double slab for tender truck axle.

Steam hammer :

11- Per first slab

12- Per slab after first one

TENDER TRUCK

Axle Slab

594

BLACKSMITH SHOP SCHEDULES.

Tender Truck
BAR, ARCH

7^/x^r T^^Of /7rc/7 Bar

Terafer Trac/^ Brch Bar

4U612-2 Bent (at bulldozer). Rate...

Includes heating and, bending top or bottom arch bars at bulldozer after
lugs have been formed on ends.

Bulldozer.

Bottom arch bar :

Arch bar l"x3|" ;

1- Per first bar

2- Per arch bar after first one

Arch bar l|"x4" :

3- Per first bar

4- Per bar after first one

Arch bar l|"x4^" :

5- Per first bar

6- Per bar after first one :

Arch bar l|"x5" or 2"x5" :

7- Per first bar

8- Per bar after first one. '

Top arch bar.

Arch bar li"x3|" :

13- Per first bar

14- Per bar after first one

TENDER TRUCK
Bar, Arch

TENDER.

595

Tender Truck

BAR, ARCH '

' Arch bar 1 i"x4" :

15- Per first bar

16- Per bar after first one

Arch bar If "x4|" ;

17- Per first bar

18- Per bar after first one

Arch bar If "x5" or 2"x5" :

19- Per first bar

20- Per bar after first one -

4U612-7 Fitted (top arch bar). Rate

Includes cutting off top arch bar and fitting to bottom arch bar after arch
bars have been bent at bulldozer.

Arch bar l|"x4f " or less :

1- Per first bar i—

2- Per bar after first one

Arch bar over If "x4f" :

3- Per first bar -

4- Per bar after first one -

4U612-10 Formed (lugs on ends) (at machine). Rate

Includes changing dies in forging machine heating, bottom arch bar and
forming lugs on both ends, as per sketch No. 2.

Arch bar l"x3f" :

1- Per first bar —

2- Per bar after first one

Arch bar l|"x4" ;

3- Per first bar

4- Per bar after first one : - :

Arch bar lf"x4f" :

5- Per first bar

6- Per bar after first one

Arch bar If "x5" or 2"x5" :

7- Per first bar

8- Per bar after first one

4U612-10 Formed (lugs at forge). Rate

Includes heating bent arch bar and forming lugs when no other work is done.
Arch bar l"x3f " :

1 3- Per first bar

14— Per bar after first one

TENDER TRUCK

Bar, Arch

596

BLACKSMITH SHOP SCHEDULES.

Tender Truck
BAR, ARCH

Arch bar l|"x4" :

15- Per first bar

16- Per bar after first one

Arch bar l|"x4|" :

17- Per first bar

18- Per bar after first one

Arch If "x5" or 2"x5" :

19- Per first bar ,

20- Per bar after first one

4U612-13 Made complete (at forge). Rate..

Includes making and bending top and bottom arch bars with tie bars,
forming lugs on ends if necessary, fitting and finishing complete at forge.

As per sketch No. 1.

Bottom arch bar l"x3f ", top arch bar l|"x3|", tie bar f"x3^" :

1- Per first frame

2- Per frame after first one

Bottom arch bar l|"x4", top arch bar lf"x4", tie bar f"x4" :

3- Per first frame.

4- Per frame after first one

Bottom arch bar lf"x4^", top arch bar l|"x4|", tie bar f"x4^" :

5- Per first frame

6- Per frame after first one

Bottom arch bar If "x5", top arch bar 2"x5", tie bar l"x5" :

7- Per first frame

8- Per frame after first one

As per sketch No. 2.

Bottom arch bar l"x3f ", top arch bar l|"x3^", tie bar f"x3^" :

13- Per first frame

14- Per frame after first one

Bottom arch bar lf"x4", top arch bar lf"x4", tie bar f"x4" ;

15- Per first frame

16- Per frame after first one

Bottom arch bar If "x4^", top arch bar lf"x4|", tie bar f"x4f" :

17- Per first frame

18- Per frame after first one

Bottom arch bar If "x5", top arch bar 2"x5", tie bar l"x5" ;

19- Per first frame

20- Per frame after first one

TENDER TRUCK
Bar, Arch

TENDER.

597

Tender Truck
BAR, ARCH

4U612-13 Made (including heating top arch bar for bending). Rate

Same as schedules 4U612-13-1 to 4U612-13-20, but also includes heating
top arch bar for bending.

As per sketch No. 1.

Bottom arch bar l''x3|", top arch bar l|"x3|", tie bar f"x35" :

25- Per first frame

26- Per frame after first one

Bottom arch bar l|"x4", top arch bar lj"x4", tie bar f"x4" :

27- Per first frame

28- Per frame after first one

Bottom arch bar lf"x4^", top arch bar l|"x4|", tie bar f^xd^" :

29- Per first frame

30- Per frame after first one

Bottom arch bar If "x5", top arch bar 2"x5", tie bar l"x5" :

31 - Per first frame

32- Per frame after first one

As per sketch No. 2.

Bottom arch bar l"x3|", top arch bar l|"x3|", tie bar f"x3^" :

36- Per first frame

37- Per frame after first one

Bottom arch bar li"x4", top arch bar lf"x4", tie bar |"x4" :

38- Per first frame

39- Per frame after first one

Bottom arch bar lf"x4^", top arch bar l|"x4|", tie bar |"x4^" :

40- Per first frame

41- Per frame after first one

Bottom arch bar lf"x5", top arch bar 2"x5", tie bar l"x5" :

42- Per first frame

43- Per frame after first one

4U612-13 Made (bottom arch bar only). Rate

Includes making and bending bottom arch bar, forming lugs on ends if
necessary, fitting and finishing complete.

As per sketch No. 1.

Arch bar l"x3^" :

51- Per first bar

52- Per bar after first one

Arch bar li"x4" :

53- Ter first bar

54- Per bar after first one

TENDER TRUCK

Bar, Arch

598

BLACKSMITH SHOP SCHEDULES.

Tender Truck

BAR, ARCH

Arch bar l|"x4|" :

55- Per first bar

56- Per bar after first one

Arch bar If "x5" or 2"x5" :

57- Per first bar

58- Per bar after first one

As per sketch No. 2.

Arch bar l"x3|" :

63- Per first bar

64- Per bar after first one

Arch bar l|"x4" :

65- Per first bar

66- Per bar after first one

Arch bar lf"x4f" :

67- Per first bar

68- Per bar after first one

Arch bar If "x5" or 2"x5" :

69- Per first bar

70- Per bar after first one *.

4U612-13 Made (top arch bar only). Rate

Includes making and bending top arch bar, fitting and finishing complete.
As per sketch No. 1.

Arch bar lf"x3f " :

75- Per first bar

76- Per bar after first one

Arch bar lf"x4" :

77- Per first bar '.

78- Per bar after first one — -

Arch bar If "x4|" :

79- Per first bar

80- Per bar after first one '

Arch bar If "x5" or 2"x5" :

81- Per first bar

82- Per bar after first one

As per sketch No. 2.

Arch bar lf"x3f" :

87- Per first bar

88- Per bar after first one

Arch bar lf"x4" :

89- Per first bar

90- Per bar after first one

TENDER TRUCK
Bar, Arch

TENDER.

599

Tender Truck
BAR, ARCH

Arch bar :

91- Per first bar

92- Per bar after first one

Arch bar If "x5" or 2"x5" :

93- Per first bar ■

94- Per bar after first one

4U612-13 Made (top arch bar only) (when iron is heated). Rate

Same as schedules 4U612-13-75 to 4U612-13-94, except iron is heated
before bending.

As per sketch No. 1.

Arch bar l|"x3|" :

101- Per first bar

102- Per bar after first one

Arch bar l|"x4" ;

103- Per first bar

104- Per bar after first one : -

Arch bar lf"x4f " :

105- Per first bar

106- Per bar after first one

Arch bar If "x5" or 2"x5" : •

107- Per first bar

108- Per bar after first one

As per sketch No. 2.

Arch bar l|"x3f" :

113- Per first bar

114- Per bar after first one

Arch bar lf"x4" ;

115- Per first bar

116- Per bar after first one

Arch bar If "x4i" :

117- Per first bar

■ 118-Per bar after first one

Arch bar If "x5" or 2"x5" :

119- Per first bar

120- Per bar after first one ■

4U612-18 Straightened (when badly bent). Rate

Includes straightening top or bottom arch bar when same has become badly
bent or twisted.

Arch bar If "x4f " or less :

1- Per first bar

2- Per bar after first one

TENDER TRUCK

Bar, Arch

600

BLACKSMITH SHOP SCHEDULES.

Tender Truck
BAR, ARCH

Arch bar and less than If "x5" :

3- Per first bar

4- Per bar after first one

Arch bar If "x5", 2"x5" :

5- Per first bar

6- Per bar after first one

4U612-18 Straightened (when slightly bent). Rate

Includes straightening top or bottom arch bar when same has become slightly
bent or twisted.

Arch bar lf"x4|" or less :

11- Per first bar

12- Per bar after first one

Arch bar l|"x4^" and less than lf"x5" :

13- Per first bar.

14- Per bar after first one

Arch bar If "x5", 2"x5" :

15- Per first bar

16- Per bar after first one

4U612-21 Welded (break). Rate...

Includes doing necessary scarfing, welding break in top or bottom arch bar,
dressing and finishing over weld complete.

Arch bar If "x4^" or less :

1- Per first bar

2- Per bar after first one

Arch bar over If "x4f" and less than If '^x5" :

3- Per first bar

4- Per bar after first one

Arch bar If "x5", 2"x5" ;

5- Per first bar

6- Per bar after first one

4U612-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in top or bottom arch
bar, dressing and finishing over weld complete.

Arch bar l"x3f" or lf"x3f" :

11- Per first bar

12- Per bar after first one

Arch bar If "x4" or lf"x4" ;

13- Per first bar

14- Per bar after first one

TENDER TRUCK
Bar, Arch

TENDER.

601

Tender Truck
BAR, ARCH

Arch bar If "x4|" or If "x41" :

15- Per first bar

16- Per bar after first one

Arch bar l|"xo" or 2"x5" :

17- Per first bar

18- Per bar after first one

4U612-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in top or bottom arch bar, dress-
ing and finishing over weld complete.

Arch bar lf"x4f" or less :

21- Per first hole

22- Per hole after first one

Arch bar over lf"x4f " and less than l|"x5" :

23- Per first hole

24r-Per hole after first one

Arch bar l|"x5", 2"x5" i

25- Per first hole

26- Per hole after first one

TENDER TRUCK

Bar, Arch

602

BLACKSMITH SHOP SCHEDULES.

Tender Truck
BAR, TIE

4U616-2 Bent (cold). Rate

Includes bending tie bar cold.

Steam hammer :

1- Per tie bar, all sizes

Bulldozer :

2- Per first tie bar (includes changing dies)

3- Per tie bar after first one

Forge :

5- Per first tie bar ;

6- Per tie bar after first one

4U616-10 Formed (lugs) (at machine). Rate

Includes changing dies in macliine, heating tie bar, and forming lugs on both
ends of bar complete.

Machine :

1- Per first tie bar, all sizes

2- Per tie bar after first one, all sizes

417616-10 Formed (lugs) (at forge). Rate..

Includes heating tie bar and forming lugs on ends of same at forge when no
other work is done.

Forge :

7- Per first tie bar, all sizes

8- Per tie bar after first one, all sizes

4U616-13 Made. Rate..

Includes getting material, bending, forming lugs on ends if necessary, and
finishing tie bar complete.

Tie bar with straight ends.

Tie bar f"x3|" :

1- Per first bar

2- Per bar after first one.,

Tie bar |"x4" :

3- Per first bar

4- Per bar after first one

Tie bar |"x4|" :

5- Per first bar

6- Per bar after first one

Tie bar l"x5" :

7- Per first bar

8- Per bar after first one

TENDER TRUCK
Bar, Tie

TENDER.

603

Tender Truck
BAR, TIE

Tie bar with lugs on ends.

Tie bar f"x3|" :

13- Per first bar

14- Per bar after first one

Tie bar f "x4" :

15- Per first bar

16- Per bar after first one

Tie bar f "x4^' :

17- Per first bar i

18- Per bar after first one

Tie bar l"x5" :

19- Per first bar

20- Per bar after first one

4U616-18 Straightened (when badly bent). Rate

Includes straightening tie bar when same has become badly bent or twisted.

1- Per first. tie bar .*

2- Per tie bar after first one

4U616-18 Straightened (when slightly bent). Rate

Includes straightening tie bar when same has become slightly bent.

7- Per first tie bar

8- Per tie bar after first one

4U616-21 Welded (break). Rate..

Includes doing necessary scarfing, welding break in tie bar, dressing and
finishing over weld complete.

1- Per first tie bar

2- Per tie bar after first one. . .-

4U616-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tie bar, dressing and
finishing over weld complete.

1 1- Per first tie bar

12- Per tie bar after first one

4U616-21 Welded (holes plugged). Rate

Includes making plug,, welding same in hole in tie bar, dressing and finishing
over weld complete.

17- Per first hole •

18- Per hole after first one

TENDER TRUCK

Bar, Tie

604

BLACKSMITH SHOP SCHEDULES.

Tender Truck

BOX, JOURNAL— BOLT

Tender Truck Journal Box Bolt

4U626

For operations on Tender Truck Journal Box Bolt, see schedules under
Miscellaneous Bolts.

TENDER TRUCK
Box, Journal — Bolt

TENDER.

605

Tender Truck

COLUMN BOLT

Tender Truck Column Bolt

4U636

For operations on Tender Truck Column Bolt, see schedules under Mis-
cellaneous Bolts.

TENDER TRUCK

Column Bolt

606

BLACKSMITH SHOP SCHEDULES.

Tender Truck

SWING LINK

7e/xKer7n/c/r

4U650-6 Dressed. Rate

Includes dressing jaw, dressing and finishing tender truck swing link to shape
complete.

Forge :

1- Per first link

2- Per link after first one

4TJ650-9 Forged. Rate

Includes getting material, blocking out, cutting out jaw, and forging com-
plete, tender truck swing link, ready for dressing.

Steam hammer :

1- Per first link

2- Per link after first one

Forge :

7- Per first link

8- Per link after first one

4U650-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaws, dressing and
finishing tender truck swing link complete.

Forge :

1 1- Per first link. ,

12- Per link after first one

TENDER TRUCK

Swing Link

TENDER.

607

Tender Truck

SWING LINK

4U650-12 Lengthened or shortened. Rate

Includes lengthening or shortening tender truck swing link by drawing out
or upsetting same.

Forge :

1- Per first link

2- Per link after first one

4U650-18 Straightened. Rate

Includes straightening old tender truck swing link when same has become
bent or twisted.

Forge :

1-Per first link

2 -Pj link after first one -

4U650-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in tender truck swing link,
dressing and finishing over Weld complete.

Forge :

1- Per first place repaired -

2- Per place repaired after first one

4U660-21 Welded (crack). Rate

Includes making dutchman, welding same in crack in tender truck swing
link, dressing and finishing over weld complete.

Forge :

7- Per first place repaired

8- Per place repaired after first one

4U660-21 Welded (holes plugged). Rate

Includes making plug, welding same in hole in tender truck swing link, dress-
ing and finishing over weld complete.

Forge.

Per first link :

11- In boss end

12- In jaw end

Per link after first one :

13- In boss end

14- In jaw end

4U660-21 Welded (new end). Rate

Includes getting new boss end or jaw end after same has been forged,
doing necessary scarfing, and welding end on old tender truck swing link,
dressing and finishing over weld complete.

Forge :

18- Per first end

19- Per end after first one

TENDER TRUCK

Swing Link

608

BLACKSMITH SHOP SCHEDULES.

Tender Truck

SWING LINK— END, BOSS

4U656-6 Dressed. Rate

Includes dressing and finishing boss end of tender truck swing link after
same has been forged.

Forge :

1- Per first end

2- Per end after first one

4U656-9 Forged. Rate

Includes getting material, blocking out and forging boss end of tender truck
swing link complete, ready for dressing.

Steam hammer :

1- Per first end

2- Per end after first one

Forge :

7- Per first end

8- Per end after first one

4U656-9 Forged and dressed. Rate...

Includes getting material, blocking out, forging, dressing and finishing boss
end of tender truck swing link complete.

Forge :

1 1- Per first end

1 2- Per end after first one

TENDER TRUCK

Swing Link Boss End

TENDER.

609

Tender Truck

SWING LINK— END, JAW

4U660-4 Cut — Iron. Rate

Includes cutting iron at power shears for tender truck swing link jaw end.
Power shears :

1-Per piece cut

4U660-6 Dressed. Rate

Includes dressing and finishing jaw end of tender truck swing link complete.
Forge :

1- Per first end

2- Per end after first one

4U660-9 Forged. Rate...

Includes getting material, blocking out and forging jaw end of tender truck
swing link complete.

Forge.

Per first end :

1- When jaw is cut

2- When jaw is not cut

Per end after first one :

5- When jaw is cut

6- When jaw is not cut

4U660-9 Forged (at forging machine). Rate

Includes changing dies in forging machine and forging complete jaw end of
tender truck swing link after material has been cut and delivered to machine.

Forging machine :

9-Per first end

10-Per end after first one

4U660-9 Forged and dressed. Rate

Includes getting material, blocking out, forging, cutting jaw, dressing and
finishing tender truck swing link jaw end complete.

Forge :

14- Per first end

15- Per end after first one

4U660-18 Straightened. Rate

Includes straightening old. tender truck swing link jaw end when same has
become bent.

Forge :

1- Per first end

2- Per end after first one

TENDER TRUCK
Swing Link Jaw End

MISCELLANEOUS

MISCELLANEOUS

Bolts *

MISCELLANEOUS

4W2-4 Cut— Iron. Rate

Includes cutting iron at power shears for miscellaneous bolts after iron has
been delivered to shears.

Power shears.

Per bolt cut :

1- Bolt I" to f " diam. inch and less than 24" long

2- Bolt f" to I" diam. inch and 24" to 48" long incl

3- Bolt f" to I" diam. inch and over 48" to 60" long incl

4- Bolt f" to f" diam. inch and over 60" long

5- Bolt I" to Ij" diam. inch and less than 26" long

6- Bolt I" to Ij" diam. inch and 26" long or over

7- Bolt If" to If" diam. inch and less than 26" long

8- Bolt If" to If" diam. inch and 26" long or over

9- Bolt If" to 2f" diam. inch and less than 26" long

10- Bolt If" to 2f " diam. inch jyid 26" long or over

11- Bolt 2f" to 3" diam. inch and less than 26" long

12- Bolt 2f " to 3" diam. inch and 26" long or over

4W2-15 Punched (hole or slot). Rate

Includes changing dies in machine and punching slot or round hole in mis-
cellaneous bolts after bolt has been delivered to machine.

If" to 2f", Ajax machine.

Per first bolt :

1- Bolt 1" to If" diam. incl

2- Bolt If" to If" diam. incl

3- Bolt If" to If" diam. incl

4- Bolt If" to 2" diam. incl

5- Bolt 2f" to 2f" diam. incl •

Per bolt after first one :

8- Bolt 1" to If" diam. incl

9- Bolt If" to If" diam. incl

10- Bolt If" to If" diam. incl

11- Bolt If" to 2" diam. incl

12- Bolt 2f" to 2f" diam. incl

613

BOLTS

Miscellaneous

614

BLACKSMITH SHOP SCHEDULES.

Bolt

BUTTON OR COUNTERSUNK HEAD

4W4-9 Forged. Rate

Includes changing dies in machine, heating and forging button or counter-
sunk head on bolt complete, after iron is cut and delivered to machine.

. 1|" to 2|" Ajax, Lewis or National bolt machines.

Per first bolt :

1- Bolt I" to I" diam. incl

2- Bolt I" to I" diam. incl

3- Bolt 1" to 1|" diam. incl

4- Bolt If" to If" diam. incl

5- Bolt If" to 2" diam. incl

Per bolt after first one :

8- Bolt I" to I" diam. incl

9- Bolt f" to I" diam. incl

10- Bolt 1" to Ij" diam. incl

11- Bolt If" to If" diam. incl

12- Bolt If" to 2" diam. incl

BOLTS

Button or Countersunk Head

MISCELLANEOUS.

615

Bolt

HEXAGONAL OR SQUARE HEAD

4W8-9 Forged. Rate

Includes changing dies in machine, heating and forging hexagonal or square
head on bolt complete after iron is cut and delivered to machine.

1^" to 2|" Ajax, National or Lewis machine.

Per first bolt :

1- Bolt f" to f" diam. incl

2- Bolt I" to 1" diam. incl

3- Bolt li" to 1|" diam. incl

• 4-Bolt If" to If" diam. incl

5- Bolt If" to 2" diam. incl

6- Bolt 2f" to 2f" diam. incl

Per bolt after first one :

10- Bolt f" to f" diam. incl

11- Bolt I" to 1" diam. incl

12- Bolt If" to If" diam. incl

13- Bolt If" to If" diam'. incl

14- Bolt If" to 2" diam. incl

15- Bolt 2f" to 2f" diam. incl

Acme machine.

Per first bolt :

19- Bolt f" to f" diam. incl.

20- Bolt I" diam *.

21- Bolt 1" diam

22- Bolt If" diam. incl

23- Bolt If" to If" diam. incl

Per bolt after first one :

27- Bolt f" to f" diam. incl

28- Bolt f " diam

29- Bolt 1" diam

30- Bolt If" to If" diam. incl

31- Bolt If" to If" diam. incl

^ 4" Ajax machine.

Per first bolt :

35- Bolt 2f" to 3" diam. incl

Per bolt after first one :

36- Bolt 2f" to 3" diam. incl

BOLTS

Hexagonal or Square Head

616

BLACKSMITH SHOP SCHEDULES.

Bolt

ROUND HEAD

4W16-9 Forged. Rate

Includes changing dies in machine, heating and forging round head on bolt
or pin complete, after iron has been delivered to machine.

1|" to 2|" Ajax, National or Acme machine.

Per first pin or bolt :

1- Pin or bolt f" to diam. incl

2- Pin or bolt f" to diam. incl

3- Pin or bolt 1" to 11" diam. incl

4- Pin or bolt If" to If" diam. incl

5- Pin or bolt If" to 2" diam. incl

6- Pin or bolt 2f" to 2f" diam. incl

Per pin or bolt after first one :

8- Pin or bolt f" to |" diam. incl

9- Pin or bolt f" to |" diam. incl

10- Pin or bolt 1" to If" diam. incl

11- Pin or bolt If" to If" diam. incl

12- Pin or bolt If" to 2" diam. incl

4" Ajax machine.

Per first pin or bolt :

16- Pin or bolt 2f" to 3" diam. incl

17- Pin or bolt 3f" to 3f" diam. incl

18- Pin or bolt 3f" to 4" diam. incl

Per pin or bolt after first one :

22- Pin or bolt 2f" to 3" diam. incl

23- Pin or bolt 3|" to 3f" diam. incl

24- Pin or bolt 3f" to 4" diam. incl

BOLTS

Round Head

TOOLS

TOOLS

AUGER, BRIDGE OR SHIP

Includes changing dies in bulldozer and bending handle of bridge or ship
auger complete.

Bulldozer :

1- Per first handle

2- Per handle after first one

4Y10-4 Cut — iron for handle. Rate

Includes cutting iron at power shears for handle of ship or bridge auger.
Power shears :

1-Per piece cut

4yia-13 Made— handle (at forge). Rate

Includes getting material, bending, dressing and finishing handle for ship
or bridge auger complete.

Forge :

1- Per first handle

2- Per handle after first one

4Y10-18 Straightened — handle. Rate

Includes straightening old handle for bridge or ship auger when same has
become bent.

Forge :

1- Per first handle

2- Per handle after first one

4Y10-21 Welded — handle on auger. Rate

Includes doing necessary scarfing and welding handle on bridge or ship
auger, dressing and finishing over weld complete.

Forge :

1- Per first handle

2- Per handle after first one

TOOLS

Auger, Bridge or Ship

619

620

BLACKSMITH SHOP SCHEDULES.

AUGER, FLUE

4Y14-13 Made complete. Rate

Includes getting material, bending, twisting, dressing and finishing flue
auger complete.

Forge :

1- Per first auger

2- Per auger after first one

4Y14-13 Made — handle only. Rate

Includes getting material, bending and dressing handle for flue auger com-
plete.

Forge :

7- Per first handle

8- Per handle after first one ! -

4Y14-21 Welded— handle. Rate

Includes doing necessary scarfing, welding break in flue auger handle or
welding handle on auger, dressing and finishing over weld complete.

Forge :

1- Per first weld

2- Per weld after first one

TOOLS

Auger, Flue

TOOLS.

621

AWL, SCRATCH

4Y18-13 Made. Rate

Includes getting material, dressing and finishing scratch awl to shape com-
plete.

Forge :

1- Per first awl

2- Per awl after first one

4Y18-19a Tempered. Rate

Includes tempering or retempering scratch awl complete.

Forge :

1- Per first awl

2- Per awl after first one

TOOLS
Awl, Scratch

622 BLACKSMITH SHOP SCHEDULES.

BAR, CHISEL

Chisel Bar

4Y26-6 Dressed and tempered. Rate

Includes straightening, forging out end, dressing and tempering old chisel
bar complete.

Forge :

1- Per first bar.

2- Per bar after first one

4Y26-13 Made and tempered. Rate

Includes getting material for chisel bar, forging out end, dressing, finishing
and tempering bar complete.

Forge :

1- Per first bar

2- Per bar after first one

TOOLS

Bar, Chisel

TOOLS.

623

BAR, CLAW

4Y28-6 Dressed and tempered (claw end). Rate

Includes forging out, dressing, finishing and tempering claw end of claw bar
complete.

Forge :

1- Per first end

2- Per end after first one

4Y28-6 Dressed and tempered (top end). Rate

Includes forging out, dressing, finishing and tempering top end of claw bar
complete.

Forge :

7- Per first end —

8- Per end after first one

4Y28-13 Made. Rate.-

Includes getting material, forging out, dressing, finishing and tempering claw
bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y28-18 Straightened. Rate

Includes straightening old claw bar when same has become bent.

Forge :

1- Per first bar

2- Per bar after first one

4Y28-21 Welded — new end. Rate

Includes getting material, welding new top or bottom end on claw bar,
dressing and finishing end to shape, and tempering complete.

Forge :

1- Per first end

2- Per end after first one

TOOLS
Bar, Claw

624

BLACKSMITH SHOP SCHEDULES.

BAR, HYDRAULIC JACK

Hyarau/fc JacH Bor

I I i I [ I I I I i I , I i ^p,—

4Y34-6 Dressed and tempered. Rate

Includes getting hydraulic jack bar after same has been forged, dressing ends
and tempering complete.

Forge :

1- Per first bar ^

2- Per bar after first one ’

4Y34-9 Forged. Rate

Includes getting material and forging out hydraulic jack bar complete, ready
for dressing.

Steam hammer or forge :

1- Per first bar

2- Per bar after first one

4Y34-13 Made. Rate

Includes getting material, forging, dressing, finishing and tempering hydraulic
jack bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y34-18 Straightened. Rate

Includes straightening old hydraulic jack bar when same has become bent-
Forge :

1- Per first bar

2- Per bar after first one

4Y34-21 Welded — new end (making included). Rate

Includes getting material, forging and dressing new end for hydraulic jack
bar, doing necessary scarfing, welding end on bar complete.

■ Forge :

1- Per first end

2- Per end after first one

TOOLS

Bar, Hydraulic Jack

TOOLS.

625

BAR, JACK OR BUGGY

4Y38-6 Dressed (after pulled and straightened). Rate

Includes cutting to length jack or buggy bar when made from old springs,
after bar has been pulled out and straightened.

Forge :

1- Per first bar

2- Per bar after first one

4Y38-6 Dressed (either end). Rate

Includes dressing, finishing and tempering either end of jack or buggy bar
after bar has been forged.

Forge :

7- Per first end.,

8- Per end after first one

4Y38-13 Made (from steel stock). Rate

Includes getting steel stock, cutting to length, dressing, finishing and temper-
ing jack or buggy bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y38-13 Made (from old springs) (at bulldozer). Rate

Includes changing dies in bulldozer, getting old springs and pulling out same
to form jack or buggy bar.

Forge :

7- Per first bar

8- Per bar after first one

4Y38-18 Straightened (after pulled out). Rate

Includes getting jack or buggy bar after same has been pulled out at bulldozer,
and straightening complete.

Steam hammer :

1- Per first bar.

2- Per bar after first one

4Y38-18 Straightened (old). Rate

Includes straightening old jack or buggy bar when no other work is done.
Forge :

7- Per first bar

8- Per bar after first one

TOOLS

Bar, Jack or Buggy

BLACKSMITH SHOP SCHEDULES.

626

BAR, LINING

4Y42-6 Dressed. Rate

Includes dressing, finishing and tempering lining bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y42-9 Forged (from old tires). Rate..

Includes getting material, cutting to length and forging out old tires to make
lining bar.

Steam hammer : ,

1- Per first bar

2- Per bar after first one

Forge :

3- Per first bar

4- Per bar after first one

4Y42-13 Made (from old tires). Rate.....

Includes getting material, cutting to length, forging out old tires, dressing,
finishing and tempering lining bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y42-13 Made (from old claw bars). Rate..

Includes getting old claw bars and forging down same, dressing, finishing
and tempering lining bar complete.

Forge :

7- Per first bar

8- Per bar after first one

4Y42-18 Straightened. Rate

Includes straightening old lining bar when same has become bent.

Forge :

1- Per fiist bar

2- Per bar after first one

TOOLS

Bar, Lining

TOOLS.

627

BAR, NAIL

/K7// Bar

4Y44-6 Dressed (pointed end). Rate

Includes dressing, pointing and tempering nail bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y44-6 Dressed (claw end). Rate

Includes dressing out claw end on nail bar, finishing and tempering end com-
plete.

Forge :

7- Per first end

8- Per end after first one

4Y44-13 Made. Rate

Includes getting material, cutting to length, dressing, finishing and tempering
nail bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y44-18 Straightened. Rate.

Includes straightening old nail bar when same has become bent.
Forge :

1- Per first bar

2- Per bar after first one

TOOLS
Bar, Nail

628

BLACKSMITH SHOP SCHEDULES.

BAR, PINCH— ENGINE

€nq//7e Bar

4Y48-6 Dressed. Rate

Includes dressing ends, finishing and tempering engine pinch bar after same
has been forged.

Forge :

1- Per first bar

2- Per bar after first one '

4Y48-6 Dressed and tempered (old). Rate

Includes redressing old engine pinch bar, finishing and tempering ends com-
plete.

Forge :

7- Per first bar

8- Per bar after first one

4Y48-9 Forged (from steel tires). Rate

Includes getting material, cutting to length and forging out engine pinch bar
from old steel tires complete, ready for dressing.

Steam hammer :

1- Per first bar. .

2- Per bar after first one -

Forge :

3- Per first bar '

4- Per bar after first one - -

4Y48-13 Made complete (from steel tires). Rate

Includes cutting to length, drawing out, forging, dressing, finishing and
tempering engine pinch bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y48-18 Straightened (when no other work is done). Rate

Includes straightening engine pinch bar when no other work is done.
Forge :

1- Per first bar -

2- Per bar after first one

TOOLS

Bar, Pinch — Engine

TOOLS.

629

BAR, PINCH— STATION

Station Pinch Gar

4Y50-6 Dressed. Rate

Includes dressing ends, finishing and tempering station pinch bar after same
has been forged.

Forge :

1- Per first bar

2- Per bar after first one

4Y50-6 Dressed and tempered (old). Rate

Includes redressing and tempering old station pinch bar.

Forge :

7- Per first bar

8- Per bar after first one

4Y50-9 Forged (from steel tires). Rate

Includes getting material, cutting to length and forging out station pinch bar
from old steel tires complete, ready for dressing.

Steam hammer :

1- Per first bar

2- Per bar after first one

Forge :

3- Per first bar

4- Per bar after first one

4Y50-13 Made complete (from steel tires). Rate

Includes cutting to length, drawing out, forging, dressing, finishing and
tempering station pinch bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y60-18 Straightened. Rate

Includes straightening station pinch bar when no other work is done.
Forge :

1- Per first bar

2- Per bar after first one

TOOLS

Bar, Pinch — Station

630

BLACKSMITH SHOP SCHEDULES.

BAR, PUNCH

Punch Bor

4Y62-6 Dressed. Rate

Includes dressing, finishing and tempering punch bar complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y62-13 Made. Rate

Includes getting material, cutting to length, dressing, finishing and tempering
punch bar complete.

Forge :

1- Per first bar

2- Per bar after first one j

4Y62-18 Straightened. Rate

Includes straightening old punch bar when same has become bent.

Forge :

1- Per first bar

2- Per bar after first one

TOOLS

Bar, Punch

TOOLS.

631

BAR, STAYBOLT

StayDo/T Bar

4Y66-6 Dressed (old) (cut end). Rate.

Includes redressing cut end of old staybolt bar, finishing and tempering
complete.

Forge :

1- Per first bar

2- Per bar after first one -

4Y66-13 Made complete. Rate

Includes getting material, dressing, finishing and tempering stay bolt bar
complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y66-18 Straightened. Rate

Includes straightening old staybolt bar when same has become bent.

Forge :

1- Per first bar

2- Per bar after first one

TOOLS
Bar, Staybolt

632

BLACKSMITH SHOP SCHEDULES.

BAR, STAYBOLT (FOR STAYBOLT BREAKER)

4Y58-6 Dressed (old) (cutting end). Rate

Includes dressing and finishing cutting end of old staybolt breaker bar and
tempering complete.

Forge : *

1- Per first end

2- Per end after first one

4Y58-13 Made complete. Rate

Includes getting material, blocking out butting end and cutting end, welding
ends on body of bar, dressing, finishing and tempering staybolt breaker bar
complete.

Forge :

1- Per first bar

2- Per bar after first one

4Y58-13 Made (butt end only). Rate

Includes getting material, forging and dressing butt end of staybolt breaker
bar complete, ready for welding on bar.

Steam hammer :

7- Per first bar

8- Per bar after first one

Forge :

11- Per first bar

12- Per bar after first one

4Y68-13 Made (cutting end only). Rate...

Includes getting material, forging and dressing cutting end of staybolt
breaker bar complete, ready to weld on bar.

Forge ;

17- Per first end

18- Per end after first one

4Y68-18 Straightened. Rate

Includes straightening old staybolt breaker bar when same has become bent.
Forge :

1- Per first bar

2- Per bar after first one

TOOLS

Bar, Staybolt (for Staybolt Breaker)

TOOLS.

633

BAR, STAYBOLT (FOR STAYBOLT BREAKER)

4Y68-21 Welded (end on bar). Rate

Includes getting butting end or cutting end of staybolt breaker bar after end
has been made, doing necessary scarfing, welding end on bar, dressing, finish-
ing and tempering complete.

Forge :

1- Per first end :

2- Per end after first one

TOOLS

Bar, Staybolt (for Staybolt Breaker)

634

BLACKSMITH SHOP SCHEDULES,

BAR, TAMPING

4Y60-6 Dressed (tamping end). Rate

Includes redressing tamping end of old tamping bar and tempering complete.
Forge ;

1- Per first bar

2- Per bar after first one

4Y60-13 Made complete. Rate

Includes getting material, dressing, finishing and tempering tamping bar
complete.

Steam hammer :

1- Per first bar

2- Per bar after first one

Forge :

3- Per first bar.

4- Per bar after first one

4Y60-18 Straightened. Rate

Includes straightening old tamping bar when same has become bent.

Forge :

1- Per first bar

2- Per bar after first one

TOOLS

Bar, Tamping

TOOLS.

635

BAR, TIMBER

4Y62-6 Dressed (old) (either end). Rate

Includes redressing either end of old timber bar, finishing and tempering end
complete.

Forge :

1- Per first end

2- Per bar after first one

4Y62-13 Made complete. Rate

Includes getting material, dressing, finishing and tempering timber bar com-
plete.

Forge :

1- Per first bar

2- Per bar after first one

4Y62-18 Straightened. Rate

Includes straightening old timber bar when same has become bent.

Forge :

1- Per first bar

2- Per bar after first one

TOOLS
Bar, Timber

636

BLACKSMITH SHOP SCHEDULES.

BAR, WEDGE

■ Bar

\ — /

1

. 1 I

^ I

—

4Y70-6 Dressed (end). Rate....

Includes doubling end over on old wedge bar to form hook, dressing and
finishing complete.

Forge :

1- Per first end

2- Per end after first one — -

4Y70-13 Made complete. Rate

Includes getting material, dressing, finishing and tempering wedge bar com-
plete.

Forge :

1- Per first bar

2- Per bar after first one

4Y70-13 Made (wedge end only). Rate

Includes getting material, forging, dressing and finishing wedge end of wedge
bar complete.

Steam hammer or forge :

1 1- Per first end

12- Per end after first one '

4Y70-13 Made (hook end). Rate

Includes getting material, forging, dressing and finishing hook end of wedge
bar complete.

Forge :

17- Per first end

18- Per end after first one

4Y70-21 Welded (to adjust length). Rate....,

Includes doing necessary scarfing, making necessary weld in wedge bar to
adjust length complete.

Forge ;

1- Per first weld

2- Per weld after first one

TOOLS

Bar, Wedge

TOOLS.

637

BLADE, SHEAR— TOP OR BOTTOM

Top Shear B/oc/e

Top or BotTom Shear Blade

y

j

TOOLS

Blade, Shear — Top or Bottom

638

BLACKSMITH SHOP SCHEDULES.

BLADE, SHEAR— TOP OR BOTTOM

Top or Bottom Shear BlocTe

TOOLS

Blade, Shear — Top or Bottom

TOOLS.

639

BLADE, SHEAR— TOP OR BOTTOM

4Y80-0 Annealed. Rate.

Includes annealing shear blade complete.

Forge :

1- Per first blade

2- Per blade after first one

Furnace :

3- Per first blade

4- Per blade after first one

4Y80-4 Cut — steel. Rate.

Includes cutting steel for shear blade.

Steam hammer :

1- Per first blade

2- Per blade after first one

Forge :

3- Per first blade

4- Per blade after first one *

4Y80-6 Dressed (old). Rate.

Includes redressing and finishing shear blade complete.

Forge.

Per first blade :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per blade after first one :

11- As per sketch No. 1

12- As per sketch No. 2

13- As per sketch No. 3 :

14- As per sketch No. 4

15- As per sketch No. 5

16- As pel sketch No. 6

4Y80-9 Forged. Rate.

Includes getting material and forging out shear blade complete.
Steam hammer.

Per first blade :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

4r-As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

TOOLS

Blade, Shear — Top or Bottom

640

BLACKSMITH SHOP SCHEDULES.

BLADE, SHEAR— TOP OR BOTTOM

Per blade after first one :

11- As per sketch No. 1

12- As per sketch No. 2

13- As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

Forge.

Per first blade :

21- As per sketch No. 1

22- As per sketch No. 2

23- As per sketch No. 3 . .

24- As per sketch No. 4

■ 25-As per sketch No. 5

26- As per sketch No. 6

Per blade after first one :

31- As per sketch No. 1

32- As per sketch No. 2

33- As per sketch No. 3

34- As per sketch No. 4

35- As per sketch No. 5

36- As per sketch No. 6

4Y80-13 Made. Rate

Includes getting material, forging, dressing and finishing shear blade com-
plete.

Steam hammer.

Per first blade :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3 -

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per blade after first one :

11- As per sketch No.l

12- As per sketch No. 2 — -

13- As per sketch No. 3 -

14- As per sketch No. 4 -

15- As per sketch No. 5

16- As per sketch No. 6 -

Forge.

Per first blade :

21- As per sketch No. 1

22- As per sketch No. 2

23- As per sketch No. 3

24- As per sketch No. 4

25- As per sketch No. 5

26- As per sketch No. 6

TOOLS

Blade, Shear — Top or Bottom

TOOLS.

641

BLADE, SHEAR— TOP OR BOTTOM

Per blade after first one :

31- As per sketch No.l

32- As per sketch No. 2

33- As per sketch No. 3

34- As per sketch No. 4

35- As per sketch No. 5 •.

36- As per sketch No. 6

4Y80-19a Tempered. Rate

Includes tempering shear blade complete.

Forge.

Per first blade :

1- As per sketch No.l

2- As per sketch No. 2

3- As per sketch No. 3

4- As per sketch No. 4

5- As per sketch No. 5

6- As per sketch No. 6

Per blade after first one :

11- As per sketch No.l

12- As per sketch No. 2

13- As per sketch No. 3

14- As per sketch No. 4

15- As per sketch No. 5

16- As per sketch No. 6

TOOLS

Blade, Shear — Top or Bottom

642

BLACKSMITH SHOP SCHEDULES.

BLOCK, SWAGE— STEAM HAMMER

4Y86-13 Made. Rate

Includes getting material, forging, dressing and finishing steam hammer
swage block complete.

Steam hammer.

2" wide or less :

1- Per fiist block

2- Per block after first one

Over 2" to 5" wide inclusive :

3- Per first block

4- Per block after first one

Over 5" to 8" wide inclusive :

5- Per first block

6- Per block after first one 1.

Over 8" wide :

7- Per first block

8- Per block after first one

Forge.

2" wide or less :

11- Per first block

12- Per block after first one

Over 2" to 5" wide inclusive

13- Per first block

14- Per block after first one

Over 5" to 8" wide inclusive :

15- Per first block

16- Per block after first one

TOOLS

Block, Swage — Steam Hammer

TOOLS.

643

BLOCK, “V”— STEAM HAMMER

4Y88-13 Made.

SteomM7/7?r7?er VS/oc/f

Rate

Includes getting material, blocking out, forging, dressing and finishing steam
hammer “V” block complete.

Steam hammer.

4" wide or less

1- Per first block

2- Per block after first one

Over 4" to 7" wide inclusive :

3- Per first block

4- Per block after first one.

Over 7 " wide :

5- Per first block

6- Per block after first one.

Forge.

4" wide or less :

11- Per first block

12- Per block after first one,

Over 4" to 7" wide :

13- Per first block

14r-Per block after first one.

, “V”—

Block,

TOOLS

Steam Hammer

644

BLACKSMITH SHOP SCHEDULES.

Cape Chisel

H/amonc/ Point Chisel

Hot Chisel

5

5

Ripper

/ ' /j([\

/

f\

C life

)

CrooKed

7?

Fuller

1 ^

Straight

Fuller

L y ^ — 1/

Note.

The schedules below apply to the following :

Cape Chisel. Gouging Chisel.

Diamond Point Chisel. Ripper.

Flat Chisel. Crooked Fuller.

Frenchman. Straight Fuller.

TOOLS.

645

CHISEL, MISCELLANEOUS

4Y100-0 Annealed. Rate

Includes annealing any one of above chisels at furnace complete.

Furnace :

1-Per chisel

4Y100-4 Cut— steel. Rate .

Includes getting steel for any one of above chisels and cutting to length com-
plete.

1-Per piece cut

4Y100-6 Dressed (old, complete). Rate..

Includes redressing old chisel as above to shape complete.

Forge :

1- Per first chisel

2- Per chisel after first one

4Y100-6 Dressed (old) (cutting end only). Rate

Includes redressing old chisel as above and tempering end complete.

Forge.

Chisel 1" or less in diameter :

7- Per first end

8- Per end after first one

Chisel over 1" in diameter :

9- Per first end

10-Per end after first one

4Y100-13 Made. Rate

Includes getting steel for chisel as above, after same has been cut to length,
dressing and finishing to shape, and tempering cutting edge complete.
Forge.

Chisel 1" or less in diameter :

1- Per first chisel

2- Per chisel after first one

Chisel over 1" in diameter :

3- Per first chisel

4- Per chisel after first one

4Y100-19a Tempered (butt end). Rate

Includes tempering butt end of any chisel as above, complete.
Forge.

Chisel 1 " or less in diameter :

1- Per first chisel

2- Per chisel after first one

Chisel over 1 " in diameter:

3- Per first chisel

4- Per chisel after first one

TOOLS

Chisel, Miscellaneous

646

BLACKSMITH SHOP SCHEDULES.

CHISEL, HOT OR COLD— BLACKSMITH’S

Chisel Hot Chisel

Note.

Track chisel similar to hot chisel and times on operations are the same. ’

4Y120-6 Dressed (after forged). Rate

Includes getting blacksmith’s hot or cold chisel after same has been forged,
punching hole for handle, dressing and finishing to shape complete.

Forge :

1- Per first chisel

2- Per chisel after first one

4Y120-6 Dressed (old). Rate

Includes redressing and finishing old blacksmith’s hot or cold chisel com-
plete.

Forge :

1- Per first chisel

2- Per chisel after first one

TOOLS

Chisel, Hot or Cold — Blacksmith’s

TOOLS.

647

CHISEL, HOT OR COLD— BLACKSMITH’S

4Y120-9 Forged. Rate

Includes getting material and forging blacksmith’s hot or cold chisel com-
plete, ready for dressing.

Steam hammer or forge :

1- Per first chisel

2- Per chisel after first one

4Y120-13 Made complete. Rate

Includes getting material, forging, dressing and finishing blacksmith’s hot
or cold chisel complete.

Steam hammer or forge :

1- Per first chisel

2- Per chisel after first one

TOOLS

Chisel, Hot or Cold — Blacksmith’s

G48

BLACKSMITH SHOP SCHEDULES.

CHISEL, WOOD

4Y146-6 Dressed and tempered (old). Rate

Includes redressing and tempering old wood chisel complete.

Forge :

1- Per first chisel

2- Per chisel after first one.

4Y146-13 Made (from bar steel). Rate

Includes getting bar steel, cutting to length, dressing, finishing and temper-
ing wood chisel complete.

Forge :

1- Per first chisel

2- Per chisel after first one

TOOLS

Chisel, Wood

TOOLS.

649

CLAMP, PLANER

Clamp

C/omp

damp

3 .

4Y160-2 Bent (at bulldozer). Rate

Includes changing dies in bulldozer and bending planer clamp complete.
Forge :

1- Pe*r first clamp

2- Per clamp after first one

4Y160-4 Cut — steel. Rate

Includes cutting steel for planer clamp.

Forge :

1- Per first piece cut

2- Per piece cut after first one

Y160-6 Dressed (after bent) (as per sketch No. 3). Rate

Includes dressing and finishing planer clamp as per sketch No. 3, after same
has been bent.

Forge :

1- Per first clamp

2- Per clamp after first one

TOOLS
Clamp, Planer

650

BLACKSMITH SHOP SCHEDULES.

CLAMP, PLANER

4Y160-13 Made. Rate

Includes getting material, cutting to length, bending and finishing planer
clamp complete.

Forge.

Per first clamp :

1- As per sketch No. 1

2- As per sketch No. 2

3- As per sketch No. 3

Per clamp after first one :

4- As per sketch No.l

5- As per sketch No. 2

6- As per sketch No. 3

4Y160-18 Straightened. Rate

Includes straightening old planer clamp when same has become bent.
Forge :

1- Per first clamp

2- Per clamp after first one

TOOLS

Clamp, Planer

TOOLS.

651

CLAMP, ‘^U”

V't^/amp

4Y164-6 Dressed (after forged). Rate...

Includes dressing and finishing “U” clamp complete, after same has been
forged.

Forge :

1- Per first clamp

2- Per clamp after first one

4Y164-9 Forged. Rate

Includes getting material, forging out “U” clamp, bending same complete,
ready for dressing.

Steam hammer or forge :

1- Per fiist clamp

2- Per clamp after first one ..

4Y164-13 Made complete. Rate

Includes getting material, forging, bending, dressing and finishing “U”
clamp complete.

Steam hammer or forge :

1- Per first clamp

2- Per clamp after first one

TOOLS
Clamp, “U”

652

BLACKSMITH SHOP SCHEDULES.

CUTTER, ROUND OR STRAIGHT— STEAM HAMMER

Sitec7/r7//c7/r7/77erSfra/g/7t C^//er

Stea/^7 /y(7/^/77er /?o^/7c/ Ci/AAer

4Y170-6 Dressed (after forged). Rate:

Includes dressing and finishing steam hammer round or straight cutter after
same has been forged.

Forge :

1- Per first cutter

2- Per cutter after first one

4Y170-6 Dressed (old). Rate.

Includes redressing and finishing old steam hammer straight or round cutter
complete.

Forge :

7- Per first cutter

8- Per cutter after first one

4Y170-9 Forged. Rate

Includes getting material and forging out steam hammer straight or round
hammer complete, ready for dressing.

Steam hammer or forge :

1- Per first cutter

2- Per cutter after first one

4Y170-13 Made complete. Rate

Includes getting material, forging out steam hammer straight or round cutter,
dressing and finishing same complete.

Steam hammer or forge :

1- Per first cutter

2- Per cutter after first one

TOOLS

Cutter, Round or Straight — Steam Hammer

TOOLS.

653

DOG, BOILERMAKER’S

Bo//er/77a/rers £?og

JUT^

4Y180-13 Made. Rate

Includes getting material, forging, doing necessary scarfing, welding, dressing
and finishing boilermaker’s dog complete.

Forge :

1- Per first dog

2- Per dog after first one

TOOLS

Dog, Boilermaker’s

654

BLACKSMITH SHOP SCHEDULES.

DOG, LATHE

Forge.

Sketches Nos. 1 and 2.

Inside diameter 4|" or less :

1- Per first dog

2- Per dog after first one.

TOOLS

Dog, Lathe

TOOLS.

655

DOG, LATHE

Inside diameter over 4^-" to 7" inclusive :

3- Per first dog

4- Per dog after first one.

Inside diameter over 7" :

5- Per first dog

6- Per dog after first one

Sketch No. 3 :

Inside diameter 4|" or less :

7- Per first dog

8- Per dog after first one

Inside diameter over 4^" to 7" inclusive :

9- Per first dog

10- Per dog after first one

Inside diameter over 7" :

11- Per first dog

12- Per dog after first one

4Y182-9 Forged. Rate

Includes getting material, forging and bending lathe dog complete, ready for
dressing.

Steam hammer or forge.

Sketches Nos. 1 and 2.

Inside diameter 4|" or less :

1- Per first dog

2- Per dog after first one

Inside diameter over 4|" to 7" inclusive :

3- Per first dog

4- Per dog after first one

Inside diameter over 7" :

5- Per first dog

6- Per dog after first one

Sketch No. 3.

Inside diameter 4|" or less :

7- Per first dog

8- Per dog after first one

Inside diameter over 4^" to 7" inclusive :

9- Per first dog

10- Per dog after first one

Inside diameter over 7" :

11- Per first dog J

12- Per dog after first one

TOOLS
Dog, Lathe

656

BLACKSMITH SHOP SCHEDULES.

DOG, LATHE

4Y182-13 Made complete. Rate

Includes getting material, forging, doing necessary scarfing, welding, dress-
ing and finishing lathe dog complete.

Forge or steam hammer.

Sketches Nos. 1 and 2 :

Inside diameter 4|" or less :

1- Per first dog

2- Per dog after first one

Inside diameter over 4^" to 7" inclusive :

3- Per first dog •

4- Per dog after first one

Inside diameter over 7" :

5- Per first dog ,

6- Per dog after first one

Sketch No. 3 ;

Inside diameter 4^" or less :

7- Per first dog

8- Per dog after first one

Inside diameter over 4|" to 7" inclusive :

9- Per first dog

10- Per dog after first one

Inside diameter over 7" :

11- Per first dog

12- Per dog after first one

Sketch No. 4 :

Hole 6" square or less ;

16- Per first dog of two halves

17- Per dog of two halves after first one

Hole over 6" square :

18- Per first dog of two halves

19- Per dog of two halves after first one -

4Y182-18 Straightened. Rate

Includes straightening old lathe dog when same has become bent.

Forge :

1- Per first dog

2- Per dog after first one . . .

4Y182-21 Welded (new tail end). Rate

Includes getting material and welding new tail end on old dog, dressing and
finishing over weld complete.

Forge :

1-Per first end ,

• 2-Per end after first one

TOOLS

Dog, Lathe

TOOLS,

657

DOG, LATHE— SET- SCREW

4Y184-19a Tempered. Rate.

Includes tempering lathe dog set-screw complete.

Forge :

1- Per first screw

2- Per screw after first one

TOOLS

Dog, Lathe — Set-screw

658

BLACKSMITH SHOP SCHEDULES.

DOG, STOP— NORTON JACK

4Y188-13 Made. Rate

Includes getting material, forging, dressing and finishing stop dog for Norton
jack complete.

Forge :

1- Per first dog

2- Per dog after* first one

TOOLS

Dog, Stop — Norton Jack

TOOLS.

659

DRILL, FLAT— ROUND OR SQUARE SHANK

6qi/are Shan/f ^ound ShanM

4Y194-6 Dressed (old) (top end). Rate.

Includes redressing top end of old flat drill and tempering complete.
Forge :

1- Per first drill

2- Per drill after first one

4Y194-6 Dressed (old complete). Rate

Includes redressing old flat drill and tempering complete.

Forge.

Per first drill :

7- Drill 1" or less

8- Drill over 1"

Per drill after first one :

9- Drill 1" or less

10-Drill over 1"

TOOLS

Drill, Flat — Round or Square Shank

660

BLACKSMITH SHOP SCHEDULES.

DRILL, FLAT— ROUND OR SQUARE SHANK

4Y194-13 Made complete. Rate

Includes getting material, forging, dressing, finishing and tempering flat
drill complete.

Forge.

Per first drill :

1- Drill 1" or less

2- Drill over 1" .*

Per drill after first one :

3- Drill 1" or less

4- Drill over 1 "

4Y194-21 Welded (new top end). Rate

Includes welding new top end on old flat drill, dressing, finishing and temper-
ing complete.

Forge.

Per first drill :

1- Drill 1" or less •

2- Drill over 1 "

Per drill after first one :

3- Drill 1" or less

4- Drill over 1"

TOOLS

Drill, Flat — Round or Square Shank

TOOLS.

661

DRILL, TWIST

4Y198-0 Annealed. Rate

Includes annealing old twist drill at forge.

1- Per first drill

2- Per drill after first one •.

4Y198-6 Dressed (old) (top end). Rate

Includes redressing top end of old twist drill and tempering complete.
Forge :

1- Per first drill

2- Per drill after first one

4Y198-19a Tempered. Rate.

Includes tempering old twist drill complete at forge.

1- Per first drill

2- Per drill after first one

TOOLS
Drill, Twist

662

BLACKSMITH SHOP SCHEDULES.

FLATTER, ROUND OR SQUARE

Flound FlatTer

4Y210-6 Dressad.

6guare F/aTter

Includes getting round or square flatter after same has been forged, punching
hole, and dressing both top and bottom end complete.

Forge :

1- Per first flatter

2- Per flatter after first one

4Y210-9 Forged. Rate

Includes getting steel for round or square flatter, cutting same to length and
flattening in die complete, ready for dressing.

Steam hammer :

1- Per first flatter

2- Per flatter after first one

Forge :

3- Per first flatter

4- Per flatter after first one

4Y210-13 Made complete. Rate

Includes cutting off steel for round or square flatter, flattening same in die,
stripping, punching hole, finishing top and bottom end complete, ready to be
ground at emery wheel.

Steam hammer :

1- Per first flatter

2- Per flatter after first one

Forge :

3- Per first flatter

4- Per flatter after first one

TOOLS

Flatter, Round or Square

TOOLS.

663

FLATTER, STEAM HAMMER

d

I

STea/7?//a/7?merr/ait/er

4Y214-13 Made complete. Rate

Includes getting material, forging, dressing and finishing steam hammer
flatter complete.

Steam hammer or forge :

1- Per first flatter

2- Per flatter after first one

4Y214-21 Welded (handles). Rate

Includes getting material, doing necessary scarfing and welding new handle
on old steam hammer flatter, dressing and finishing over weld complete.

Forge :

1- Per first handle

2- Per handle after first one

TOOLS

Flatter, Steam Hammer

664

BLACKSMITH SHOP SCHEDULES.

FULLER, BOTTOM

4Y220-6 Dressed. Rate

Includes dressing and finishing bottom fuller complete, after same has been
forged.

Forge :

1- Per first fuller

2- Per fuller after first one

4Y220-9 Forged. Rate

Includes getting material, blocking out and forging bottom fuller complete,
ready for dressing.

Steam hammer or forge :

1- Per first fuller

2- Per fuller after first one

4Y220-13 Made complete. Rate

Includes getting material, blocking out, forging, dressing and finishing bottom
fuller complete.

Forge :

1- Per first fuller

2- Per fuller after first one

TOOLS

Fuller, Bottom

TOOLS.

665

FULLER, ROUND— STEAM HAMMER

STec7/7? /ya/7?/77er /foi//7c/ Ti/Z/er

4Y228-13 Made.

Rate

Includes getting material, forging, dressing and finishing steam hammer
round fuller complete.

Steam hammer or forge :

1- Per first fuller

2- Per fuller after first one

TOOLS

Fuller, Round — Steam Hammer

BLACKSMITH SHOP SCHEDULES.

666

FULLER, THREE-CORNERED— STEAM HAMMER

4Y232-6 Dressed. Rate

Includes dressing and finishing steam hammer three-cornered fuller com-
plete, after same has been forged.

Forge :

1- Per first fuller

2- Per fuller after first one

4Y232-9 Forged. Rate .

Includes getting material, forging steam hammer three-cornered fuller com-
plete, ready for dressing.

Steam hammer or forge :

1- Per first fuller

2- Per fuller after first one !

4Y232-13 Made complete. Rate

Includes getting material, forging, dressing and finishing steam hammer
three-cornered fuller complete.

Steam hammer or forge :

1- Per first fuller

2- Per fuller after first one

TOOLS

Fuller, Three-cornered — Steam Hammer

TOOLS.

667

FULLER, TOP

Top Fullers

4Y234-6 Dressed. Rate

Includes punching handle hole, dressing and finishing top fuller complete
after same has been forged. ’

Forge.

Per first fuller ;

1- Radius 1" or less

2- Radius over to If" incl ^ .

3- Radius over If"

Per fuller after first one :

•4-Radius 1" or less

5- Radius over 1" to If" incl

6- Radius over If" ! ' '

4Y234-9 Forged. Rate...

Includes getting steel, cutting same to length, andjorging top fuller com-
plete, ready for dressing.

Steam hammer.

Per first fuller :

1- Radius 1" or less

2- Radius over 1" to If" incl ’

3- Radius over If"

Per fuller after first one :

^Radius 1" or less

5- Radius over 1" to If" incl

6- Radius over If"

Forge.

Per first fuller :

11- Radius 1" or less

12- Radius over 1" to If" incl *

13- Radius over If"

TOOLS
Fuller, Top

668

BLACKSMITH SHOP SCHEDULES.

FULLER, TOP

Per fuller after first one :

14- Radius 1" or less

15- Radius over 1" to If" incl

16- Radius over If":

4Y234-13 Made complete. Rate

Includes getting material, forging, dressing and finishing top fuller complete .
Forge.

Per first fuller :

1- Radius 1" or less

2- Radius over 1" to If" incl

3- Radius over If"

Per fuller after first one :

4- Radius 1" or less • .

5- Radius over 1" to If" incl

6- Radius over If"

TOOLS

Fuller, Top

TOOLS.

669

GOUGE, ROUND OR SQUARE

4Y25Q-6 Dressed (after forged). Rate

Includes dressing and finishing round or square gouge after same has been
forged.

Forge :

1- Per first gouge

2- Per gouge after first one

4Y260-6 Dressed (old).

Includes redressing old round or square gouge complete.

Forge :

1- Per first gouge

2- Per gouge after first one

Rate.

4Y260-9 Forged. Rate

Includes getting material, cutting to length and forging round or square
gouge complete, ready for dressing.

Steam hammer or forge :

1- Per first gouge

2- Per gouge after first one

TOOLS

Gouge, Round or Square

670

BLACKSMITH SHOP SCHEDULES.

GOUGE, ROUND OR SQUARE

4Y250-13 Made complete. Rate

Includes getting material, cutting to length, forging, dressing and finishing
round or square gouge complete.

Steam hammer or forge :

1- Per first gouge

2- Per gouge after first one.

TOOLS

Gouge, Round or Square

TOOLS.

671

HAMMER, BACKING— BLACKSMITH’S

4Y260-6 Dressed (old). Rate

Includes redressing old blacksmith’s backing hammer complete.

Forge :

1- Per first hammer

2- Per hammer after first one

4Y260-13 Made. Rate

Includes getting If" or 2" square steel, cutting to length, dressing and finish-
ing to form blacksmith’s backing hammer complete.

Forge :

1- Per first hammer

2- Per hammer after first one

TOOLS

Hammer, Backing — Blacksmith’s

672

BLACKSMITH SHOP SCHEDULES.

HAMMER, HAND

hammer

4Y264-6 Dressed (either end).

Sid;te.

Includes dressing, finishing and tempering either end of old hand hammer
complete.

Forge :

1- Per first end

2- Per end after first one

4Y264-13 Made. Rate

Includes getting material, cutting to length, forging, dressing, finishing and
tempering hand hammer complete.

Forge :

1- Per first hammer '

2- Per hammer after first one

TOOLS

Hammer, Hand

TOOLS.

673

HAMMER, SCALE— PAINTER’S

Ft7/nlBrs
Sco/e Hammer

T//?s/ 7?///?5 Hfammer

Note.

Times for operations on Tinsmith’s hammer same as Painter’s Scale Ham-
mer.

4Y268-13 Made. Rate

Includes getting material, forging, dressing, finishing and tempering painter’s
hand hammer or tinsmith’s hammer complete.

Forge :

1- Per first hammer

2- Per hammer after first one

TOOLS

Hammer, Scale — Painter’s

674

BLACKSMITH SHOP SCHEDULES.

HAMMER, SLEDGE— BLACKSMITH’S

d/acKsmifhs'
S/ec^ge Hammer

4Y272-6 Dressed (face).

Rate.

Includes dressing and finishing face of blacksmith’s sledge hammer, and
tempering complete.

Forge :

1- Per first face, all sizes

2- Per face after first one, all sizes

4Y272-6 Dressed (peen). Rate

Includes dressing and finishing peen end of blacksmith’s sledge hammer, and
tempering complete.

Forge :

7- Per first hammer

8- Per hammer after first one

4Y272-13 Made complete. Rate

Includes getting material, forging, dressing, finishing and tempering black-
smith’s sledge hammer complete.

Forge.

Per first hammer :

1- 18 lb. or less

2- Over 18 lb

Per hammer after first one :

3- 18 lb. or less

4- Over 18 lb

TOOLS

Hammer, Sledge — Blacksmith’s

TOOLS.

675

HAMMER, SLEDGE— MACHINIST’S

A/^c/vrvsrs'
6/edge //cummer

4Y274-6 Dressed (either end). Rate

Includes dressing, finishing and tempering either face or peen end of ma-
chinist’s sledge hammer complete.

Forge :

1- Per first end

2- Per end after first one. .'

4Y274-13 Made complete. Rate

Includes getting material, forging, dressing and finishing and tempering ma-
chinist’s sledge hammer complete.

Forge :

1- Per first hammer

2- Per hammer after first one

TOOLS

Hammer, Sledge — Machinist’s

676

BLACKSMITH SHOP SCHEDULES.

HOOK, CANT

C<7/7/A/00/r

4Y290-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing cant hook
complete.

Forge :

1- Per first hook

2- Per hook after first one

TOOLS

Hook, Cant

TOOLS.

677

HOOK, PACKING

Packing Hook

— o

4Y294-6 Dressed (point turned). Rate

Includes turning point on packing hook after eye is bent and end forged
down.

Forge :

1- Per first hook

2- Per hook after first one

4Y294-6 Dressed (eye turned). Rate

Includes turning eye on packing hook complete.

Forge :

1- Per first hook

2- Per hook after first one

4Y294-9 Forged (end of hook). Rate

Includes forging down end of packing hook after eye has been turned.
Forge :

1- Per first hook

2- Per hook after first one

4Y294-13 Made complete. Rate..

Includes getting material, cutting to length, turning eye, forging down point
and turning same, and finishing packing hook complete.

Forge :

1- Per first hook

2- Per hook after first one

TOOLS
Hook, Packing

678

BLACKSMITH SHOP SCHEDULES.

HOOK, PIKE POLE

/^//Te /ymr

4Y296-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing pike pole
hook complete.

Forge :

1- Per first hook

2- Per hook after first one

TOOLS

Hook, Pike Pole

TOOLS.

679

HOOK, VELOCIPEDE

/e/oapec/e //oo/r

4Y300-13 Made. Rate

Includes getting material, cutting to length, forging, bending, dressing and
finishing velocipede hook complete.

Forge ;

1- Per first hook

2- Per hook after first one

TOOLS

Hook, Velocipede

680

BLACKSMITH SHOP SCHEDULES. ,

IRON, PACKING

_ 'Pt?ck/nQ Iron

4Y310-4 Cut — Iron. Rate

Includes cutting iron at power shears for packing iron complete.

Power shears :

1-Per piece cut

4Y310-6 Dressed (eyes at machine). Rate...

Includes changing dies in forging machine and turning eyes on packing iron.
Machine :

1- Per first iron

2- Per iron after first one

4Y310-9 Forged (ends). Rate....

Includes forging down ends of packing iron after eyes have been made at
machine.

Steam hammer :

1- Per first iron

2- Per iron after first one

4Y310-13 Made complete. Rate

Includes getting material, cutting to length, turning eyes, forging down point,
dressing and finishing packing iron to shape complete.

Forge :

1- Per first iron

2- Per iron after first one

TOOLS

Iron, Packing

TOOLS.

681

IRON, SOLDERING

So/c/er//7q /ron

4Y314-13 Made. Rate

Includes getting material, forging, dressing and finishing soldering iron com-
plete.

Forge :

1- Per first iron.

2- Per iron after first one

TOOLS
Iron, Soldering

682

BLACKSMITH SHOP SCHEDULES.

MAUL, TRACK

Track Maul

4Y320-6 Dressed and tempered. Rate

Includes dressing and tempering either end of track maul complete at forge.

1- Per first end

2- Per end after first one

4Y320-11 Ground (emery wheel). Rate

Includes grinding track maul at emery wheel after same has been dressed.

1- Per first end '

2- Per end after first one

4Y320-13 Made complete. Rate

Includes getting material, cutting to length, forging down, dressing, finish-
ing and tempering track maul complete at forge.

1- Per first maul

2- Per maul after first one

4Y320-19a Tempered. Rate

Includes tempering end of track maul complete at forge.

1- Per first end

2- Per end after first one

TOOLS

Maul, Track

TOOLS.

683

OLD MAN

4Y330-13 Made complete. Rate

Includes getting material, forging out foot, getting round piece, doing neces-
sary welding, dressing and finishing old man to shape complete.

Forge:

1- Per first old man

2- Per old man after first one

4Y330-18 Straightened. Rate.

Includes straightening old man when same has become bent.

Forge :

1- Per first old man

2- Per old man after first one

4Y330-21 Welded (round piece). Rate

Includes getting round piece and welding same on foot of old man.
Forge :

1- Per first round piece

2- Per round piece after first one

TOOLS
Old Man

684

BLACKSMITH SHOP SCHEDULES.

OLD MAN’S ARM

2%/ Mans Hrm

4Y334-13 Made. Rate

Includes getting material, forging, dressing and finishing old man’s arm to
shape complete.

Forge :

1- Per first arm

2- Per arm after first one

4Y334-18 Straightened. Rate ...

Includes straightening old man’s arm when same has become bent.

Forge :

1- Per first arm

2- Per arm after first one

TOOLS

Old Man’s Arm

TOOLS.

685

PICK,

4Y340-6 Dressed. Rate

Includes dressing, finishing and tempering coal pick complete, after same has
been forged.

Forge :

1- Per first pick

2- Per pick after first one

4Y340-6 Dressed (old). Rate

Includes redressing and tempering either end of old coal pick complete.
Forge :

7- Per first end

8- Per end after first one

4Y340-9 Forged. Rate

Includes getting material and forging out coal pick complete, ready for dress-
ing.

Steam hammer :

1- Per first pick

2- Per pick after first one

Forge :

3- Per first pick

4- Per pick after first one

TOOLS
Pick, Coal

686

BLACKSMITH SHOP SCHEDULES.

PICK, COAL

4Y340-13 Made complete. Rate

Includes getting material, forging, dressing, finishing and tempering coal
pick complete.

Steam hammer :

1- Per first pick

2- Per pick after first one

Forge :

3- Per first pick

4- Per pick after first one

TOOLS

Pick, Coal

TOOLS.

687

PICK, DIRT— OLD STYLE OR TAMPING

4Y344-6 Dressed. Rate

Includes dressing and tempering old style or tamping dirt pick after same
has been forged.

Forge :

1- Per first pick

2- Per pick after first one.

4Y344-6 Dressed and tempered (old).

Rate.

Includes redressing and tempering either end of old tamping or old style dirt
pick complete.

Forge :

7- Per first end

8- Per end after first one

TOOLS

Pick, Dirt — Old Style or Tamping

688

BLACKSMITH SHOP SCHEDULES.

PICK, DIRT— OLD STYLE OR TAMPING

4Y344-9 Forged. Rate

Includes getting material and forging out tamping or old style dirt pick com-
plete, ready for dressing.

Steam hammer :

1- Per first pick

2- Per pick after first one

Forge :

3- Per first pick

4- Per pick after first one

4Y344-13 Made complete. Rate

Includes getting material, forging, dressing, finishing and tempering old style
or tamping dirt pick complete.

Forge :

1- Per first pick

2- Per pick after first one

Forge :

3- Per first pick

4- Per pick after first one

TOOLS

Pick, Dirt — Old Style or Tamping

TOOLS.

689

PIN, DRIFT— BLACKSMITH’S

4Y360-6 Dressed. Rate

Includes dressing and finishing blacksmith’s drift pin complete.

Forge :

1- Per first pin

2- Per pin after first one

4Y360-9 Forged. Rate

Includes getting material and forging blacksmith’s drift pin complete, ready
for dressing.

Steam hammer or forge :

1- Per first pin

2- Per pin after first one

4Y350-13 Made. Rate

Includes getting material, forging, dressing and finishing blacksmith’s drift
pin complete.

Forge or steam hammer :

1- Per first pin

2- Per pin after first one -

TOOLS

Pin, Drift — Blacksmith’s

690

BLACKSMITH SHOP SCHEDULES.

PIN, DRIFT— BOILERMAKER’S

4Y362-13 Made. Rate

Includes- getting material, forging, dressing and finishing boilermaker’s drift
pin complete.

Forge.

Per first pin :

1- Pin 1" or less in diameter

2- Pin over 1" in diameter

Per pin after first one :

3- Pin 1" or less in diameter

4- Pin over 1" in diameter

4Y362-18 Straightened. Rate

Includes straightening old boilermaker’s drift pin when same has become
bent.

Forge :

1- Per first pin

2- Per pin after first one

TOOLS

Pin, Drift — Boilermaker’s

TOOLS.

691

PUNCH, CENTER— MACHINIST’S

4Y360-13 Made. Rate

Includes getting material, cutting to length, dressing and finishing and tem-
pering machinist’s center punch complete.

Forge :

1- Per first punch

2- Per punch after first one

4Y360-19a Tempered (old). Rate

Includes retempering old machinist’s center punch complete.

Forge :

1- Per first punch

2- Per punch after first one

TOOLS

Punch, Center — Machinist’s

692

BLACKSMITH SHOP SCHEDULES.

PUNCH, HANDLE— BLACKSMITH’S OR BOILERMAKER’S
Handle Punch for Ordinary Work

4Y364-6 Dressed (old). Rate -

Includes straightening and dressing either end of old blacksmith’s or boiler-
maker’s handle punch complete.

Forge ;

1- Per first end

2- Per end after first one

4Y364-13 Made complete. Rate

Includes getting material, forging, dressing and finishing blacksmith’s or
boilermaker’s handle punch complete.

Steam hammer or forge :

1- Per first punch

2- Per punch after first one

4Y364-21 Welded (new end). Rate

Includes getting material and welding new end on o Id blacksmith’s or boiler-
maker’s handle punch, dressing and finishing to shape complete.

Forge :

1- Per first end

2- Per end after first one

TOOLS

Punch, Handle — Blacksmith’s or Boilermaker’s

TOOLS.

693

PUNCH, TRACK— ROUND OR SQUARE

Square and Round Handle Punch for Track Work

4Y370-6 Dressed, straightened and tempered. Rate

Includes dressing, straightening and tempering end of old round or square
track punch.

Forge :

1- Per first punch

2- Per punch after first one

4Y370-13 Made complete. Rate

Includes getting material, forging, dressing and tempering round or square
track punch complete.

Steam hammer or forge :

1- Per first punch

2- Per punch after first one

4Y370-21 Welded (new end). Rate

Includes getting material and welding new end on old round or square track
punch, dressing, finishing and tempering end complete.

Forge :

1- Per first end

2- Per end after first one

TOOLS

Punch, Track — Round or Square

694

BLACKSMITH SHOP SCHEDULES.

PUNCH, SCREW— MACHINIST’S

Sere y /^e'rc/?

4Y374-6 Dressed. Rate

Includes dressing and finishing machinist’s screw punch complete, after same
has been forged.

Forge :

1- Per first punch

2- Per punch after first one

4Y374-9 Forged. Rate

Includes getting material, blocking out, forging and bending machinist’s
screw punch complete, ready for dressing.

Steam hammer or forge :

1- Per first punch

2- Per punch after first one —

4Y374-13 Made. Rate

Includes getting material, forging, bending, dressing and finishing machinist’s
screw punch complete.

Steam hammer or forge :

1- Per first punch

2- Per punch after first one

TOOLS

Punch, Screw — Machinist’s

TOOLS.

695

RAKE, FIRE— BLACKSMITH’S

F/ re Fo/re

4Y380-13 Made. Rate

Includes getting material, forging, doing necessary welding, dressing and
finishing fire rake complete.

Forge :

1- Per first rake

2- Per rake after^first one

TOOLS

Rake, Fire — Blacksmith’s

696

BLACKSMITH SHOP SCHEDULES.

SADDLE, ANVIL— BLACKSMITH’S

6addle

4Y390-13 Made. Rate

Includes getting material, bending, dressing and finishing blacksmith’s anvil
saddle complete.

Forge :

1- Per first saddle

2- Per saddle after first one

TOOLS

Saddle, Anvil — Blacksmith’s

TOOLS.

697

SCRAPER, PAINTER’S

4Y396-6 Dressed (old). Rate

Includes redressing and tempering old painter’s scraper complete.

Forge :

1- Per first scraper

2- Per scraper after first one

4Y396-13 Made (from old files). Rate

Includes getting old files, dressing painter’s scraper +o shape and tempering
complete.

Forge :

1- Per first scraper

2- Per scraper after first one

TOOLS

Scraper, Painter’s

698

BLACKSMITH SHOP SCHEDULES.

SCREW-DRIVER

Screw Driver

Brace Screw Driver

§

7

2

4Y400-13 Made. Rate

Includes getting material, cutting to length, dressing and finishing and
tempering screw-driver complete.

Forge.

Per first screw-driver :

1- As per sketch No.l

2- As per sketch No. 2

Per screw-driver after first one :

3- As per sketch No.l

4- As per sketch No. 2

TOOLS

Screw-driver

TOOLS.

699

SET HAMMER

6et Hammer

4Y406-13 Made (from flatters). Rate

Includes getting flatters and forming round edge or rolling set hammer com-
plete at steam hammer.

Steam hammer :

1- Per first set hammer

2- Per set hammer after first one

4Y406-13 Made (from new stock). Rate

Includes getting material, forging, dressing and finishing set hammer com-
plete.

Forge :

1- Per first set hammer

2- Per set hammer after first one

TOOLS
Set Hammer

700

BLACKSMITH SHOP SCHEDULES.

SET, RIVET

6et

4Y408-13 Made. Rate

Includes getting material, forging, dressing^ and finishing rivet set complete.
Forge :

1- Per first set

2- Per set after first one

TOOLS

Set, Rivet

TOOLS.

701

SPRINKLER HANDLE— BLACKSMITH’S

3

s5prink/er Hand /e

4Y412-13 Made.

Rate.

Includes getting material, cutting to length, bending, dressing and finishing
blacksmith’s sprinkler handle complete.

Forge :

1- Per first handle

2- Per handle after first one

4Y412-21 Welded (handle end). Rate

Includes getting stock for new handle end for blacksmith’s sprinkler handle,
welding same on end of handle, bending, dressing and finishing complete.

Forge :

1- Per first handle end

2- Per handle end after first one,

TOOLS

Sprinkler Handle — Blacksmith’s

702

BLACKSMITH SHOP SCHEDULES.

SWAGE, BOTTOM

Includes dressing and finishing bottom swage after same has been cut out and
forged.

Forge :

1- Per first swage

2- Per swage after first one

4Y416-9 Forged. Rate

Includes getting material, blocking out and forging bottom swage complete,
ready for dressing.

Steam hammer :

1- Per first swage

2- Per swage after first one

Forge :

3- Per first swage

4- Per swage after first one

4Y416-13 Made. Rate

Includes getting material, forging, dressing and finishing bottom swage com-
plete.

Forge :

1- Per first swage

2- Per swage after first one

TOOLS

Swage, Bottom

TOOLS.

703

SWAGE, STEAM HAMMER

Includes making groove in swage, welding, bending and fitting swage to
proper size.

Forge.

Per first swage :

1- Diam. of hole 2j" or less

2- Diam. of hole over 2j"

Per swage after first one :

, 3-Diam. of hole 2j" or less

4-Diam. of hole over 2|"

4Y420-9 Forged. Rate

Includes getting material and forging out steam hammer swage complete,
ready for dressing.

. Steam hammer or forge.

Per first swage :

1- Diam. of hole 2 \" or less

2- Diam, of hole over 2|"

Per swage after first one :

3- Diam. of hole 2 \" or less

4- Diam. of hole over 2 \"

4Y420-9 Forged (one half of swage). Rate

Includes getting material and forging out one half of steam hammer swage
complete, ready for dressing, and welding on other half.

Steam hammer or forge.

Per first half of swage :

1 1- Diam. of hole 2 \" or less

12- Diam. of hole over 2 \"

Per half of swage after first one :

13- Diam. of hole 2 \" or less

14- Diam. of hole over 2 \"

TOOLS

Swage, Steam Hammer

704

BLACKSMITH SHOP SCHEDULES.

SWAGE, STEAM HAMMER

4Y420-13 Made complete. Rate

Includes getting material and forging steam hammer swage, making groove,
bending and fitting swage to proper size complete.

Forge.

Per first swage :

1- Diam. of hole 2j" or less

2- Diam. of hole over 2 \"

Per swage after first one :

3- Diam. of hole 2 \" or less

4- Diam. of hole over 2 \"

4Y420-21 Welded (break). Rate

Includes doing necessary scarfing, welding break in steam hammer swage,
dressing and finishing over weld complete.

Forge.

Per first swage :

1- Diam. of hole 2 \" or less

2- Diam. of hole over 2|"

Per swage after first one :

3- Diam. of hole 2 \" or less

4- Diam. of hole over 2j"

4Y420-21 Welded (new half) (after same has been forged). Rate

Includes getting new half of steam hammer swage after half has been forged,
doing necessary scarfing, welding half on swage, making groove, bending,
dressing and finishing complete.

Forge.

Per first half :

1 1- Diam. of hole 2|" or less

12- Diam. of hole over 2j"

Per half after first one :

1 3- Diam. of hole 2 \" or less -

1 4- Diam. of hole over 2j"

4Y420-21 Welded (new half) (making included). Rate

Includes getting material, blocking out half of steam hammer swage, welding
on old half, bending, dressing and finishing swage complete.

Forge.

Per first half of swage :

2 1- Diam. of hole 2j" or less

22- Diam. of hole over 2 \"

Per half after first one :

23- Diam. of hole 2 \" or less

24^Diam. of hole over 2 \"

TOOLS

Swage, Steam Hammer

TOOLS.

705

SWAGE, TOP

Top Silage

4Y424-6 Dressed. Rate

Includes getting top swage after same has been forged, punching handle
hole, shaping groove, dressing and finishing top swage complete.

Forge.

Per first swage :

1- Diam, of groove 1 " or less

2- Diam. of groove over 1" to 2" incl

3- Diam. of groove over 2"

Per swage after first one :

4- Diam. of groove 1" or less

5- Diam. of groove over 1 " to 2 " incl

6- Diam. of groove over 2"

4Y424-9 Forged. Rate

Includes getting material and forging top swage complete, ready for dressing.
Does not include punching handle hole.

Steam hammer or forge :

1- Per first swage, all sizes

2- Per swage after first one, all sizes

TOOLS
Swage, Top

706

BLACKSMITH SHOP SCHEDULES.

SWAGE, TOP

4Y424-13 Made complete. Rate

Includes getting material, forging, shaping groove, punching handle hole,
and finishing top swage complete.

Forge.

Per first swage :

1- Diam. of groove 1" or less

2- Diam. of groove over 1" to 2" incl

3- Diam. of groove over 2 "

Per swage after first one :

4- Diam. of groove 1" or less

5- Diam. of groove over 1" to 2" incl

6- Diam. of groove over 2"

TOOLS

TOOLS.

707

TONGS, CHISEL

4Y440-6 Dressed. Rate .

Includes getting chisel tongs after same have been forged, bending, dressing,
punching holes, riveting tongs together, and fitting to proper size.

Forge :

1- Per first pair of tongs

2- Per pair of tongs after first one

4Y440-9 Forged. Rate

Includes blocking out both halves of chisel tongs and forging same to proper
size, and shaping jaw complete, ready for dressing.

Steam hammer or forge :

1- Per first pair of tongs

2- Per pair of tongs after first one

4Y440-13 Made complete. Rate

Includes getting material, forging, bending, punching hole, riveting tongs to-
gether, dressing fit and finishing complete.

Forge :

1- Per first pair of tongs, all sizes

2- Per pair of tongs after first pair, all sizes

TOOLS
Tongs, Chisel

708

BLACKSMITH SHOP SCHEDULES.

TONGS, FLAT— BLACKSMITH’S

/^/£7t Tongs

4Y444-6 Dressed. Rate

Includes getting blacksmith’s flat tongs after same have been forged, bending,
dressing, punching holes, riveting tongs together, and fitting to proper size.

Forge.

Per first pair of tongs :

1- Fit wide or less

2- Fit over to If" wide incl

3- Fit over If" wide

Per pair of tongs after first pair :

4- Fit f " wide or less

5- Fit over f " to If" wide incl

6- Fit over If" wide

4Y444-9 Forged. Rate

Includes blocking out both halves of blacksmith’s flat tongs, forging same to
proper size, and shaping jaw complete.

Steam hammer or forge.

Per first pair of tongs :

1- Fit I" wide or less

2- Fit over f " to If" wide incl

3- Fit over If" wide

Per pair of tongs after first pair ;

4- Fit f " wide or less

5- Fit over f " to If" wide incl

6- Fit over If" wide

4Y444-13 Made. Rate

Includes getting material, forging, bending, punching hole, riveting tongs
together, dressing fit and finishing complete.

Forge.

Per first pair of tongs :

1- Fit f " wide or less

2- Fit over f " to If" wide incl

3- Fit over If" wide

Per pair of tongs after first pair :

4- Fit f " wide or less

5- Fit over f " to If" wide incl

6- Fit over If" wide

TOOLS

Tongs, Flat — Blacksmith’s

TOOLS.

709

TONGS, FLAT— FURNACE

4Y446-6 Dressed. Rate

Includes getting furnace flat tongs after same have been forged, bending,
dressing, punching hole, riveting together, and fitting to proper size complete.

, Forge :

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y446-9 Forged. Rate

Includes blocking out both halves of furnace flat tongs, forging same to proper
size, and shaping jaw complete, ready for dressing.

Steam hammer or forge :

1- Per first pair of tongs

2- Per pair of tongs after first one

4Y446-13 Made. Rate

Includes getting material for furnace flat tongs, forging, bending, punching
hole, riveting tongs together, dressing and finishing fit to proper size com-
plete.

Forge :

1- Per first pair of tongs. . . .’

2- Per pair of tongs after first one

TOOLS

Tongs, Flat — Furnace

710

BLACKSMITH SHOP SCHEDULES.

TONGS, FLAT— FURNACE— HANDLE

A2//y?^ce 7d/?^s
L?oi//?/e /ya/?6f/e

4Y450-13 Made. Rate

Includes getting material, bending, welding, dressing and finishing handle
for furnace flat tongs complete.

Forge :

1- Per first handle

2- Per handle after first one

4Y450-19 Shrunk on tongs. Rate -

Includes heating and shrinking handle on furnace flat tongs complete.
Forge :

1- Per first handle .-

2- Per handle after first one

4Y450-21 Welded on tongs. Rate

Includes doing necessary scarfing and welding handle on furnace flat tongs,
dressing and finishing complete.

Forge :

1- Per first handle

2- Per handle after first one —

TOOLS

Tongs, Flat — Furnace — Handle

TOOLS.

711

TONGS, ICE

/ce To/?^s

4Y454-13 Made. Rate

Includes getting material, forging, bending,- punching, riveting and finishing
ice tongs complete.

Forge :

1- Per first pair of tongs.

2- Per pair of tongs after first one

TOOLS
Tongs, Ice

712

BLACKSMITH SHOP SCHEDULES.

TONGS, LINK

l/n/(' Tongs

4Y464-6 Dressed. Rate

Includes getting link tongs after same have been forged, bending, dressing,
punching holes, riveting tongs together, fitting to proper size.

Forge :

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y464-9 Forged. Rate ...

Includes blocking out both halves of link tongs, forging same to proper
shape, and shaping jaw complete.

Steam hammer :

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y464-13 Made. Rate

Includes getting material, forging, bending, punching hole, riveting tongs to-
gether, dressing fit and finishing complete.

Forge :

1- Per first pair of tongs

2- Per pair of tongs after first pair

TOOLS

Tongs, Link

TOOLS.

713

TONGS, LIP— BLACKSMITH’S

Lip Tongs

4Y468-6 Dressed. Rate...

Includes getting blacksmith’s lip tongs after same have been forged, bending,
dressing, punching, riveting together, and setting to proper shape complete.

Per first pair of tongs :

1- Tongs with l|"x4" fit or less

2- Tongs with over lj"x4" fit

Per pair of tongs after first pair :

5- Tongs with lj"x4" fit or less

6- Tongs with over l|"x4" fit

4Y468-9 Forged. Rate...

Includes getting material, blocking out both halves of blacksmith’s lip tongs,
and shaping jaw complete, ready for dressing.

Per first pair of tongs :

1- Tongs with lj"x4" fit or less

2- Tongs with over li"x4" fit

Per pair of tongs after first pair :

5- Tongs with 11 "x4" fit or less

6- Tongs with over lj"x4" fit

4Y468-13 Made. Rate

Includes getting material and forging blacksmith’s hp tongs, punching, rivet-
ing, dressing and finishing tongs to shape complete.

Per first pair of tongs :

1- Lip ll"x4" or less

2- Lip over ll"x4"

Per pair of tongs after first pair :

5- Lip lj"x4" or less

6- Lip over ll"x4"

TOOLS

Tongs, Lip — Blacksmith’s

714

BLACKSMITH SHOP SCHEDULES.

TONGS, LIP— FURNACE

4Y470-6 Dressed. Rate

Includes getting furnace lip tongs after same have been forged, bending, dress-
ing, punching, riveting together, and setting to proper shape complete.

1- Per first pair of tongs

2- Per pair after first pair of tongs

4Y470-9 Forged. Rate

Includes getting material, blocking out both halves of furnace lip tongs, and
shaping jaw complete, ready for dressing.

1- Per first pair of tongs

2- Per pair after first pair of tongs

4Y470-13 Made. Rate ..

Includes getting material, forging, furnace lip tongs to hold scrap or axle
strap, punching, riveting, dressing or fitting tongs to shape complete.

1- Per first pair of tongs

2- Per pair after first pair of tongs

TOOLS

Tongs, Lip — Furnace

TOOLS.

715

TONGS, PICK-UP— BLACKSMITH’S

P/c/t' Up Tongs

4Y474-6 Dressed. Rate

Includes getting blacksmith’s pick-up tongs after same have been forged,
bending, dressing, punching, riveting together, and setting to proper shape
complete.

1- Per first pair of tongs —

2- Per pair after first pair of tongs

4Y474-9 Forged. Rate

Includes getting material, blocking out both halves of blacksmith’s pick-up
tongs, and shaping jaw complete, ready for dressing.

1- Per first pair of tongs

2- Per pair after first pair of tongs

4Y474-13 Made. Rate

Includes getting material, forging blacksmith’s pick-up tongs, punching,
riveting and dressing tongs complete.

1- Per first pair of tongs, all sizes

2- Per pair of tongs after first pair, all sizes

TOOLS

Tongs, Pick-up — Blacksmith’s

716

BLACKSMITH SHOP SCHEDULES.

TONGS, PICK-UP— FURNACE.

4Y476-6 Dressed. Rate

Includes getting furnace pick-up tongs after same have been forged, bending,
dressing, punching, riveting together, and setting to proper shape complete.

1- Per first pair of tongs ’

2- Per pair of tongs after first pair

4Y476-9 Forged. Rate

Includes getting material, blocking out both halves of furnace pick-up tongs,
and shaping jaw complete, ready for dressing.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y476-13 Made. Rate

Includes getting material, forging furnace pick-up tongs, punching, riveting,
dressing and finishing tongs complete.

1- Per first pair of tongs, all sizes

2- Per pair of tongs after first pair, all sizes

TOOLS

Tongs, Pick-up — Furnace.

TOOLS.

717

TONGS, PILE

Furnace longs

4Y478-6 Dressed. Rate

Includes getting pile tongs after same have been forged, bending, dressing,
punching, riveting together, and setting to proper shape complete.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y478-9 Forged. Rate

Includes getting material, blocking out both halves of pile tongs, and shap-
ing jaw complete, ready for dressing.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y478-13 Made. Rate

Includes getting material, forging pile tongs for holding piles for frames,
axles, driving shafts, etc., punching, dressing and finishing tongs complete.

1- Per first pair of tongs, all sizes

2- Per pair of tongs after first pair, all sizes

TOOLS
Tongs, Pile

718

BLACKSMITH SHOP SCHEDULES.

TONGS, RIVET

4Y490-13 Made. Rate

Includes getting material, forging, riveting tongs, punching, riveting, dress-
ing and finishing tongs complete.

1- Per first pair of tongs

2- Per pair of tongs after first pair

TOOLS

Tongs, Rivet

TOOLS.

719

TONGS, ROCKER ARM— END

4Y494-6 Dressed. Rate

Includes getting rocker arm tongs after same have been forged, bending,
dressing, punching, riveting together, and setting to proper shape complete.

1- Per first pair of tongs

2- Per pair after first pair

4Y494-9 Forged. Rate

Includes getting material, blocking out both halves of rocker arm end tongs,
and shaping jaw complete, ready for dressing.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y494-13 Made. Rate.._

Includes getting material, forging rocker arm end tongs for holding piles for
frames, axles, driving shafts, etc., punching, dressing and finishing tongs
complete.

1- Per first pair of tongs, all sizes

2- Per pair after first pair of tongs '

TOOLS

Tongs, Rocker Arm — End

720

BLACKSMITH SHOP SCHEDULES.

TONGS, ROCKER ARM— JOURNAL

Includes getting journal rocker arm tongs after same have been forged, bend-
ing, dressing, punching, riveting together, and setting to proper shape com-
plete.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y496-9 Forged. Rate

Includes getting material, blocking out both halves of pile tongs, and shap-
ing jaw complete, ready for dressing.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y496-13 Made. Rate

Includes getting material, forging rocker arm to old journal holding piles for
frames, axles, driving shafts, etc., punching, dressing and finishing tongs
complete.

1- Per first pair of tongs, any size

2- Per pair of tongs after first pair, any size

TOOLS

Tongs, Rocker Arm — Journal

TOOLS.

721

TONGS, ROUND OR SQUARE— BLACKSMITH’S
<5 qua re Tongs

4Y600-6 Dressed. Rate

Includes getting blacksmith’s round or square tongs after same have been
forged, bending, dressing, punching, riveting together, and setting to proper
shape complete.

Per first pair of tongs :

1- Fit li" or less

2- Fit over 1|" to 3" inclusive

3- Fit over 3"

Per pair of tongs after first pair :

6- Fit or less

7- Fit over to 3" incl

8- Fit over 3"

4Y600-9 Forged. Rate

Includes getting material, blocking out both halves of blacksmith’s round or
square tongs, and shaping jaw complete, ready for dressing.

1- Per first pair of tongs, all sizes

2- Per pair of tongs after first pair, all sizes

4Y600-13 Made. Rate...

Includes getting material, forging blacksmith’s round or square tongs for
holding piles for frames, axles, driving shafts, etc., punching, dressing and
finishing tongs complete.

Per first pair of tongs :

1- Fit or less

2- Fit over to 3" inclusive

3- Fit over 3"

Per pair of tongs after first pair :

6- Fit Ij" or less

7- Fit over to 3" inclusive

8- Fit over 3"

TOOLS

Tongs, Round or Square — Blacksmith’s

722

BLACKSMITH SHOP SCHEDULES.

TONGS, ROUND OR HALF-ROUND— FURNACE

4Y602-6 Dressed. Rate

Includes getting furnace round or half-round tongs after same have been
forged, bending, dressing, punching, riveting together, and setting to proper
shape complete.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y502-9 Forged. Rate

Includes getting material, blocking out both halves of furnace round or half-
round tongs for holding axles, driving shafts, and shaping jaw complete, ready
for dressing.

1- Per first pair of tongs

2- Per pair of tongs after first pair

4Y502-13 Made. Rate

Includes getting material, forging furnace round or half-round tongs for
holding piles for frames, axles, driving shafts, etc., punching, dressing and
finishing tongs complete.

1- Per first pair of tongs, all sizes

2- Per pair after first pair of tongs —

TOOLS

Tongs, Round or Half-round — Furnace

TOOLS.

723

TONGS, SADDLE

4Y510-6 Dressed. Rate

Includes getting saddle tongs after same have been forged, bending, dressing,
punching, riveting together and setting to proper shape complete.

Per first pair of tongs :

1- ^Fit 4" wide or less

2- Fit over 4" wide

Per pair of tongs after first pair :

5- Fit 4" wide or less

6- Fit over 4" wide

4Y510-9 Forged. Rate

Includes getting material, blocking out both halves of saddle tongs, and
shaping jaw complete, ready for dressing.

1- Per first pair of tongs, all sizes

2- Per pair of tongs after first pair

4Y510-13 Made. Rate..

Includes getting material, forging saddle tongs for holding piles for frames,
axles, driving shafts, etc., punching, dressing and finishing tongs complete.

Per first pair of tongs :

1- Fit 4" wide or less

2- Fit over 4" wide

Per pair of tongs after first pair :

5- Fit 4" or less ,

6- Fit over 4" wide

TOOLS
Tongs, Saddle

724

BLACKSMITH SHOP SCHEDULES.

TOOL, MISCELLANEOUS

Bonng ancf Turning Tool

/

1 /

Bonng Mill Too!

i/ar ITheei Bonng Tool

Bonng Tool

Boring Tool

For Tool Holder

\ I j j

Cutting Off Tool

TOOLS

Tool, Miscellaneous

TOOLS.

725

TOOL, MISCELLANEOUS

blotter Tool

7

/

Fight Threading Tool

Straight Threading Too!

TOOLS

Tool, Miscellaneous

726

BLACKSMITH SHOP SCHEDULES.

TOOL, MISCELLANEOUS

4Y530 Note.

The schedules below apply to the following tools.
Tool, Boring and Turning.

“ Boring — Boring Mill.

“ Boring— Car Wheel.

“ Boring — Lathe.

“ Boring — with Tool Holder.

“ Cut off.

“ Grooving.

“ Side Roughing — Lathe.

“ Side Roughing— Planer.

“ Slotting.

“ Threading — Right.

“ Threading — Straight.

4Y530-6 Dressed (old). Rate

Includes redressing, tempering and finishing any one of the above tools com-
plete.

Per tool :

1- Steel to yV' square incl

2- Steel to f " square incl

3- Steel P'xl"

4- Steel |"x1y" -

5- Steel |"x1y" -

6- Steel f"xl|"

7- Steel f"xlf"

8- Steel |"x1y"

9- Steel 1" square

10- Steel 1" square

11- Steel P'xli"

12- Steel l"xlf"

13- Steel l"x2"

14- Steel Ij" square —

15- Steel U"x2"

16- Steel H"x2"

17- Steel U"x2i" ;

18- Steel H"x2|"...

TOOLS

Tool, Miscellaneous

TOOLS.

727

TOOL, MISCELLANEOUS

4Y630-13 Made. Rate

Making any one of the above tools; includes getting material, laying off,
cutting steel, stamping, forging, dressing and tempering tool complete.

Per tool :

1- Steel t" to tV' square incl

2- Steel to I" square incl

3- Steel |"xl"

4- Steel

5- Steel f"xU"

6- Steel f"xl|"

7- Steel |"xlf"

8- Steel i"xl|"

9- Steel 1" square

10- Steel 1" round

11- Steel l"xU"

12- Steel P'xlf"

13- Steel l"x2"

14- Steel Ij" square

15- Steel lj"x2"

16- Steel l?"x2"

17- Steel li"x2i"

18- Steel l|"x2|"

TOOLS

Tool, Miscellaneous

728

BLACKSMITH SHOP SCHEDULES.

4Y640-13 Made. Rate

Includes getting material, forging, dressing and finishing male or female V
tool complete.

1- Per first tool

2- Per tool after first one

TOOLS

Tool, V — Male or Female

TOOLS.

729

TRAM, CROSSHEAD

Crossneacf Tram

4Y660-13 Made. Rate

Includes getting material, cutting to length, bending, dressing and temper-
ing crosshead tram complete.

1- Per first tram

2- Per tram after first one

4Y660-19a Tempered (old). Rate

Includes retempering point of old crosshead tram.

1- Per first point

2- Per point after first one

TOOLS

Tram, Crosshead

730

BLACKSMITH SHOP SCHEDULES.

TRAM, VALVE

Tram

4Y654-13 Made. Rate

Includes getting material, cutting to length, bending, dressing and tempering
valve tram complete.

1- Per first tram

2- Per tram after first one

4Y554-19a Tempered (old). Rate

Includes retempering point of old valve tram.

1- Per first point

2- Per point after first one

TOOLS

Tram, Valve

TOOLS.

731

TRAM, WHEEL

h^heel Tram

4Y558-13 Made. Rate

Includes getting material, cutting to length, bending, dressing and temper-
ing wheel tram complete.

1- Per first tram

2- Per tram after first one

4Y558-19a Tempered (old). Rate

Includes retempering point of old wheel tram.

1- Per first point

2- Per point after first one

TOOLS
Tram, Wheel

732

BLACKSMITH SHOP SCHEDULES.

WEDGE, SOLID

4Y662-13 Made. Rate

Includes getting material, forging and dressing solid wedge complete.
Steam hammer or forge ;

1- Per first wedge — .

2- Per wedge after first one

4Y662-18 Straightened. Rate

Includes straightening old solid wedge when same has become bent.
Forge :

1- Per first wedge.

2- Per wedge after first one

TOOLS

Wedge, Solid

TOOLS.

733

WEDGE, SPLIT

6p//f iVedCfC

4Y664-6 Dressed.

Rate.

Includes cutting, slotting, dressing and finishing split wedge complete.

Forge :

1- Per first wedge

2- Per wedge after first one

4Y664-9 Forged. Rate

Includes getting material, forging split wedge complete, ready for dressing.

Steam hammer or forge :

1- Per first wedge

2- Per wedge after first one

4Y664-13 Made. Rate

Includes getting material, forging, cutting, slotting, dressing and finishing
split wedge complete.

Forge :

1- Per first -wedge

2- Per wedge after first one

4Y664-18 Straightened. Rate

Includes straightening old split wedge complete.

Forge:

1- Per first wedge

2- Per wedge after first one

TOOLS
Wedge, Split

734

BLACKSMITH SHOP SCHEDULES.

WRENCH, ALLIGATOR

HUiqaTor French

4Y580-0 Annealed. Rate

Includes annealing alligator wrench complete at forge.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y580-6 Dressed. Rate

Includes cutting jaw, dressing and finishing alligator wrench complete, after
same has been forged.

Forge.

Per first wrench :

1- Wrench 18" long or less

2- Wrench over 18" long

Per wrench after first one :

5- Wrench 18" long or less

6- Wrench over 18" long

4Y680-6 Dressed (old). Rate

Includes cutting ends of jaws of old alligator wrench, redressing jaws, and
finishing wrench complete.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y680-9 Forged. Rate

Includes getting material, cutting and forging alligator wrench complete,
ready for dressing.

Steam hammer or forge.

Per first wrench :

1- Wrench 18" long or less

2- Wrench over 18" long

Per wrench after first one :

5- Wrench 18" long or less

6- Wrench over 18" long

TOOLS

Wrench, Alligator

TOOLS.

735

WRENCH, ALLIGATOR

4Y680-13 Made. Rate

Includes getting material, forging, cutting jaw, dressing and finishing alli-
gator wrench complete.

Per first wrench :

1- Wrench 18" long or less

2- Wrench over 18" long

Per wrench after first one :

5- Wrench 18" long or less

6- Wrench over 18" long

4Y680-18 Straightened. Rate

Includes straightening old alligator wrench when same has become bent.
Forge :

1- Per first wrench

2- Per wrench after first one

4Y580-19a Tempered. Rate

Includes tempering old or new alligator wrench complete at forge.

Forge :

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Alligator

736

BLACKSMITH SHOP SCHEDULES.

WRENCH, BARREL

Barret Wrench

Barret Wrench

Barret tYrench

aA»

4Y684-6 Dressed (old). Rate

Includes redressing and refitting old barrel wrench complete.

Forge :

1- Per first wrench ;

2- Per wrench after first one

4Y684-13 Made from tubing. Rate

Includes getting steel tubing, cutting to length, forging, dressing and finish-
ing barrel wrench complete, as per sketches Nos. 1, 2, and 3.

1- Per first wrench - -

2- Per wrench after first one

TOOLS

Wrench, Barrel

TOOLS.

737

WRENCH, BOX— DOUBLE END

Boud/e End Box lYrench

Includes cutting double end, bending, dressing and finishing box wrench
complete.

Per first wrench :

1- Wrench 24" long or less

2- Wrench over 24"

Per wrench after first one :

5- Wrench 24" long or less

6- Wrench over 24"

4Y588-9 Forged. Rate.

Includes getting material, forging out double end box wrench complete,
ready for dressing. .

Steam hammer or forge :

Per first wrench : '

1- Wrench 24" long or less

2- Wrench over 24"

Per wrench after first one :

5- Wrench 24" long or less

6- Wrench over 24"

4Y688-13 Made (complete). Rate

Includes getting material, forging, cutting out nut fit, bending, dressing and
finishing double end box wrench complete.

Per first wrench :

1- Wrench 24" long or less

2- Wrench over 24"

Per wrench after first one :

5- Wrench 24" long or less

6- Wrench over 24"

TOOLS

Wrench, Box — Double End

738

BLACKSMITH SHOP SCHEDULES.

WRENCH, BOX— SINGLE END

6mg/e End Box iVrench

4Y692-6 Dressed. Rate

Includes cutting single end, bending, dressing and finishing box wrench
complete.

Per first wrench :

1- For nut 1|" or less

2- For nut over Ij"

Per wrench after first one :

5- For nut 1 \" or less

6- For nut over

4Y592-9 Forged. Rate

Includes getting material, forging out single end box wrench complete, ready
for dressing.

Steam hammer or forge.

Per first wrench :

1- For nut Ij" or less

2- For nut over 1|"

Per wrench after first one :

5- For nut li" or less

6- For nut over 1|".

TOOLS

Wrench, Box — Single End

TOOLS.

739

WRENCH, BOX— SINGLE END

4Y592-13 Made. Rate

Includes getting material, forging, cutting out nut fit, bending, dressing and
finishing single end box wrench complete.

Per first wrench :

1- For nut Ij" or less

2- For nut over Ij"

Per wrench after first one :

5- For nut or less ■

6- For nut over

TOOLS

Wrench, Box — Single End

740

BLACKSMITH SHOP SCHEDULES.

WRENCH, CROWFOOT

Crowfoot Wrench

4Y696-3 Closed. Rate

Includes closing and dressing nut fit on old crowfoot wrench complete.
Forge :

1- Per first wrench

2- Per wrench after first one

4Y696-6 Dressed. Rate

Includes dressing and finishing crowfoot wrench, dressing nut fit, and finish-
ing complete.

Forge.

Per first wrench :

1- For 1\" nut or less -

2- For over 1\" nut

Per wrench after first one :

5- For Ij" nut or less

6- For over nut

4Y596-9 Forged. Rate

Includes getting material and forging crowfoot wrench complete, ready for
dressing.

Steam hammer or forge.

Per first wrench :

1- For 1\" nut or less

2- For over l\" nut -

Per wrench after first one :

5- For 1|" nut or less

6- For over 1\" nut

TOOLS

Wrench, Crowfoot

TOOLS.

741

WRENCH, CROWFOOT

4Y596-13 Made. Rate ..

Includes getting material, forging, welding, dressing and finishing crowfoot
wrench to shape complete.

Forge.

Per first wrench :

1- For nut or less

2- For over Ij" nut

Per wrench after first one :

5- For Ij" nut or less

6- For over l\" nut

4Y596-18 Straightened. Rate

Includes straightening old crowfoot wrench when same has become bent..
Forge :

1- Per first wrench

2- Per wrench after first one

4Y596-21 Welded (handle). Rate

Includes getting material, welding new handle on old crowfoot wrench,
punching holes, dressing and finishing wrench complete.

Forge :

1- Per first handle

2- Per handle after first one

TOOLS

Wrench, Crowfoot

742

BLACKSMITH SHOP SCHEDULES.

WRENCH, GREASE CUP PLUG

S/^/e iPrease Cop

2

4Y600-2 Bent. Rate

Includes bending grease cup plug wrench complete, after ends of wrench
have been upset.

1- Per first wrench

2- Per wrench after first one

4Y600-4 Cut — steel. Rate

Includes cutting steel at power shears for grease cup plug wrench.

1-Per piece cut

4Y600-11 Ground. Rate

Includes grinding ends of grease cup plug wrench complete, at^ emery wheel.

1- Per first wrench

2- Per wrench after first one

4Y600-13 Made (complete). Rate

Includes getting material, forging grease cup plug wrench, making ends, doing
necessary welding, dressing and finishing wrench complete.

Per first wrench :

1- As per sketch No. 1 *

2- As per sketch No. 2

Per wrench after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TOOLS

Wrench, Grease Cup Plug

TOOLS.

743

WRENCH, GREASE CUP PLUG

4Y600-18 Straightened. Rate

Includes straightening old grease cup plug wrench complete.

1- Per first wrench

2- Per wrench after first one

4Y600-20a Upset. Rate

• Includes changing dies in forge, making and upsetting ends of grease cup
plug wrench complete.

1- Per first end

2- Per wrench after first one

TOOLS

Wrench, Grease Cup Plug

744

BLACKSMITH SHOP SCHEDULES.

WRENCH, HYDRANT— HOBO

Mo//yoh7/p/ yre/pc/?

4Y604-13 Made. Rate..

Includes getting material, forging, bending, dressing and finishing hobo
hydrant wrench.

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Hydrant — Hobo

TOOLS.

' 745

WRENCH, OPEN-END— DOUBLE

Udut)le Open End Wrench

Includes closing and refitting old double open-end wrench complete.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y610-6 Dressed. Rate ..

Includes cutting nut fits and dressing and finishing double open-end wrench
complete.

Forge.

Per first wrench :

1- For I" nut or less

2- For nut over to 11" incl

3- For nut over Ij" to 2" incl

4- For nut over 2" to 4" incl

Per wrench after first one :

9-For I" nut or less

10- For nut over to Ij" incl ,

11- For nut over Ij" to 2" incl

12- For nut over 2" to 4" incl

4Y610-9 Forged. Rate

Includes getting material and forging out double open-end wrench complete,
ready for dressing.

Steam hammer or forge ;

Per fii'st wrench :

1- For I" nut or less

2- For nut over to Ij" incl

3- For nut over to 2" incl

4- For nut over 2" to 4" incl

Per wrench after first one :

9-For I" nut or less

10- For nut over to 1\" incl

11- For nut over 1\" to 2" incl

12- For nut over 2" to 4" incl

TOOLS

Wrench, Open-end — Double

746

BLACKSMITH SHOP SCHEDULES.

WRENCH, OPEN-END— DOUBLE

4Y610-13 Made. Rate...

Includes getting material, forging out double open-end wrench, punching,
and cutting nut fit, fitting to proper size, dressing and finishing wrench com-
plete.

Forge.

Per first wrench :

1- For I" nut or less

2- For nut over to incl

3- For nut over to 2" incl

4- For nut over 2" to 4" incl

Per wrench after first one :

9-For I" nut or less

10- For nut over to Ij" incl

11- For nut over li" to 2" incl

12- For nut over 2 " to 4" incl

4Y610-18 Straightened. Rate

Includes straightening old double open-end wrench when same has become
bent.

1- Per fir^t wrench

2- Per wrench after first one '.

4Y610-21 Weld (handle). Rate

Includes making weld in handle of old double open-end wrench.

1- Per first weld

2- Per weld after first one

TOOLS

Wrench, Open-end — Double

TOOLS.

747

WRENCH, OPEN-END— SINGLE

6/n^/e Open EnO ifrench

Includes closing and refitting old single open-end wrench complete.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y612-6 Dressed. Rate.

Includes cutting nut fit, dressing and finishing single open-end wrench com-
plete.

Forge.

Per first wrench :

1- For I" nut or less

2- For nut over to incl

3- For nut over 1 \" to 2" incl

4- For nut over 2" to 4" incl

5- For nut over 4" to 5" incl

6- For nut over 5"

Per wrench after first one :

9-For nut or less

10- For nut over to 1 \" incl

11- For nut over Ij" to 2" incl

12- For nut over 2" to 4" incl

13- For nut over 4" to 5" incl

14- For nut over 5".

4Y612-9 Forged. Rate

Includes getting material and forging out single open-end wrench complete,
ready for dressing.

Steam hammer or forge.

Per first wrench :

1- For I" nut or less

2- For nut over to If" incl

3- For nut over If" to 2" incl

4- For nut over 2" to 4" incl

5- For nut over 4" to 5" incl ...

6- For nut over 5"

TOOLS

Wrench, Open-end— Single

748

BLACKSMITH SHOP SCHEDULES.

WRENCH, OPEN-END— SINGLE

Per wrench after first one :

9-For I" nut or less

10- For nut over to 1 \" incl,

11- For nut over 1|" to 2" incl,

12- For nut over 2 " to 4" incl. .

13- For nut over 4" to 5" incl. .

14- For nut over 5"

4Y612-13 Made. Rate

Includes getting material, forging single open-end wrench, punching out nut
fit, dressing same to size, and finishing wrench complete.

Forge.

Per first wrench :

1- For I" nut or less

2- For nut over to incl

3- For nut over to 2" incl

4- For nut over 2" to 4" incl

5- For nut over 4" to 5" incl

6- For nut over 5"

Per wrench after first one :

9-For I" nut or less

10- For nut over to incl : .

11- For nut over 1 \" to 2" incl

12- For nut over 2" to 4" incl

13- For nut over 4" to 5" incl

14- For nut over 5"

4Y612-18 Straightened. Rate

Includes straightening old single open-end wrench when same has become
, bent.

1- Per first wrench

2- Per wrench after first one

4Y612-21 Weld (handle). Rate.

Includes making weld in handle of old single open-end wrench.

1- Per first weld

2- Per weld after first one

TOOLS

Wrench, Open-end — Single

TOOLS.

749

WRENCH, S— CAR REPAIRER’S

Gar Repairer’s “S” Wrench

4Y616-2 Closed. Rate

Includes closing end of car repairer’s wrench to fit different nuts, dressing and
finishing end complete.

Forge :

1- Per first end

2- Per end after first one

4Y616-6 Dressed. Rate

Includes dressing car repairer’s S wrench after same has been forged.

1- Per first wrench

2- Per wrench after first one

4Y616-13 Made (at bulldozer). Rate

Includes changing dies in bulldozer, heating old spring leaves, punching out
wrench, stamping, straightening and finishing car repairer’s S wrench com-
plete.

1- Per first wrench

2- Per wiiench after first one

TOOLS

Wrench, S — Car Repairer’s

750

BLACKSMITH SHOP SCHEDULES.

WRENCH, S— DOUBLE-END

]}oudle Encf "6" lyre ncfi

4Y620-3 Closed. Rate.

Includes closing end of S wrench and dressing to fit nut complete.

1- Per first end

2- Per end after first one

4Y620-6 Dressed. Rate

Includes cutting out nut fit, dressing and finishing double-end S wrench
complete, after same has been forged.

Forge.

Per first wrench :

1- For nut or less

2- For nut over to incl

3- For nut over to If" incl

4- For nut over If" to If" incl

5- For nut over If"

Per wrench after first one :

9-For nut or less

10- For nut over to |" incl

11- For nut over f" to If" incl

12- For nut over If" to If" incl

13- For nut over If" •

4Y620-9 Forged. Rate

Includes getting material and forging and bending S wrench complete, ready
for dressing.

Steam hammer or forge.

Per first wrench :

1- For nut or less -

2- For nut over |" to f " incl

3- For nut over f" to If" incl

4- For nut over If" to If" incl —

5- For nut over If"

Per end after first one :

9-For nut or less -

10- For nut over to |" incl - -

11- For nut over f" to If" incl —

12- For nut over If" to If" incl -

13- For nut over If" —

TOOLS

Wrench, S — Double-end

TOOLS.

751

WRENCH, S— DOUBLE-END

4Y620-13 Made. Rate

Includes getting material, forging S wrench, bending, punching and cutting
out ends, fitting to proper size nut, dressing and finishing complete. .

Forge.

Per first wrench :

1- For nut or less

2- For nut over to incl

3- For nut over I" to If" incl .

4- For nut over If" to If" incl. . . .

5- For nut over If"

Per wrench after first one :

9-For nut or less

10- For nut over to incl

11- For nut over to If" incl

12- For nut over If" to If" incl

13- For nut over If"

4Y620-18 Straightened. Rate

Includes straightening old S wrench complete :

1- Per first wrench

2- Per wrench after first one

4Y620-21 Weld (handle). Rate.

Includes making weld in handle of old S wrench complete.

1- Per first weld

2- Per weld after first one

TOOLS

Wrench, S — Double-end

752

BLACKSMITH SHOP SCHEDULES.

WRENCH, SET- SCREW— GOOSENECK

4Y624r-9 Forged (handles). Rate

Includes forging down handles of gooseneck set-screw wrench at steam
hammer, and bending complete, after wrench has been upset at machine.

1- Per first wrench

2- Per wrench after first one

4Y624-20a Upset at forging machine. Rate

Includes changing dies in forging machine and upsetting gooseneck set-screw
wrench complete.

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Set-Screw — Gooseneck

TOOLS.

753

WRENCH, SPANNER

Spanner Wrench

4Y628-6 Dressed. Rate

Includes bending, dressing and finishing spanner wrench complete, after same
has been forged.

Per first wrench :

1- As per sketch No. 1

2- As per sketch No. 2

Per wrench after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4Y628-9 Forged. Rate

Includes getting material and forging out handle and hook of spanner wrench
complete, ready for dressing.

Steam hammer or forge.

Per first wrench :

1- As per sketch No.l

2- As per sketch No. 2

Per wrench after first one :

5- As per sketch No. 1

6- As per sketch No. 2

TOOLS

Wrench, Spanner

754

BLACKSMITH SHOP SCHEDULES.

WRENCH, SPANNER

4Y628-13 Made complete. Rate

Includes getting material, forging out wrench and handle of spanner wrench,
bending, dressing and finishing complete.

Per first wrench :

1- As per sketch No. 1

2- As per sketch No. 2

Per wrench after first one :

5- As per sketch No. 1

6- As per sketch No. 2

4Y628-13 Made (hook only). Rate

Includes getting material, forging, bending and dressing hook end only of
spanner wrench, as per sketch No. 2.

Forge :

10- Per first end

11- Per end after first one

4Y628-18 Straightened. Rate

Includes- straightening old spanner wrench complete.

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Spanner

TOOLS.

755

WRENCH, SOCKET— STRAIGHT OR GOOSENECK

Straight SocKet IVrench

Soose fVecK SocKet Wrench

Includes closing and refitting straight or gooseneck socket wrench nut fit
complete.

1- Per first wrench

2- Per wrench after first one

4Y634-6 Dressed. Rate

Includes punching holes, dressing and finishing straight or gooseneck socket
wrench complete, ' after same has been forged.

Per first wrench :

1- For nut If" or less

2- For nut over 1 \"

Per wrench after first one :

5- For nut 1 \" or less

6- For nut over

TOOLS

Wrench, Socket — Straight or Gooseneck

756

BLACKSMITH SHOP SCHEDULES.

WRENCH, SOCKET— STRAIGHT OR GOOSENECK

4Y634-9 Forged (solid). Rate

Includes getting material and forging out solid straight or gooseneck socket
wrench complete, ready for dressing.

Steam hammer or forge.

Per first wrench :

1- For nut or less

2- For nut over IJ" -

Per wrench after first one :

5- For nut 1 \" or less

6- For nut over I5"

4Y634-13 Made complete. Rate

Includes getting material and making band, welding band on handle, fitting
socket to proper size, squaring top end, bending handle if necessary, and
finishing straight or gooseneck socket wrench complete.

Per first wrench ;

1- For nut 1|" or less

2- For nut over

I *

Per wrench after first one :

5- For nut 1 \" or less

6- For nut over 1^"

4Y634-18 Straightened. Rate. ..

Includes straightening old straight or gooseneck socket wrench.

1- Per first wrench

2- Per wrench after first one

4Y634-21 Welded (handle). Rate

Includes getting material, making handle for socket wrench and welding
handle on wrench, bending and finishing complete.

1- Per first handle — -

2- Per handle after first one

TOOLS

Wrench, Socket — Straight or Gooseneck

TOOLS.

757

WRENCH, TAP— DOUBLE- OR SINGLE-END
Double Tap iVrench

Single End Tap Wrench

4Y642-3 Closed. Rate.

Includes closing tap fit in tap wrench complete.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y642-6 Dressed. Rate

Includes punching holes, squaring, dressing and finishing double- or single-
end tap wrench complete.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y642-9 Forged. Rate

Includes getting material and forging out double- or single-end tap wrench
complete, ready for dressing.

Forge.

Double-end wrench :

1- Per first wrench

2- Per wrench after first one

Single-end wrench :

3- Per first wrench

4- Per wrench after first one

4Y642-13 Made. Rate

Includes getting material for double- or single-end tap wrench, forging,
punching holes, dressing and finishing wrench complete. ’

Forge :

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Tap — Double- or Single-end

758

BLACKSMITH SHOP SCHEDULES.

WRENCH, TAP— DOUBLE- OR SINGLE-END

4Y642-18 Straightened. Rate

Includes straightening old tap wrench complete.

Forge :

1- Per first wrench

2- Per wrench after first one

4Y642-21 Welded (handle). Rate

Includes getting material and welding handle on old double-end tap wrench
complete.

Forge :

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Tap — Double- or Single-end

TOOLS.

759

WRENCH, TRUSS ROD— CAR REPAIRER’S

Tr^ss /?oaf

4Y660-13 Made. Rate

Includes getting material, forging, cutting, slotting, dressing and finishing
car repairer’s truss rod wrench complete.

1- Per first wrePch

2- Per wrench after first one

4Y660-18 Straightened. Rate...

Includes straightening old car repairer’s truss rod wrench complete.

1- Per first wrench

2- Per wrench after first one

TOOLS

Wrench, Truss Rod — Car Repairer’s

INDEX TO BOILER MOUNTINGS

Box, sand, bracket

“ “ “ step

“ “ lever, hand

“ “ “ “ rod

“ “ valve arm

“ “ “ “ connection

“ “ “ “ “ end. . .

Cock, blowoff, lever

“ “ “ end, jaw

“ “ “ fulcrum

“ “ rod, connecting ........

“ “ “ “ end, jaw,

“ “ shaft

“ “ “ bracket

Crane, front end, boom

“ “ “ “ end, boss

“ “ “ “ jib

“ “ “ “ “ end, boss. . .

“ “ “ _ “ “ jaw

“ “ “ “ support

“ “ “ carriage, jaw, lower. . .

“ “ “ “ “ upper. .

“ “ “ lock bracket

Drip pan bracket

Dynamo bracket

Fountain, steam, bracket

“ “ dry pipe hanger

Gauge, steam, lamp bracket

Glass, water, lamp bracket

Handrail post bracket

Headlight step bracket

Injector bracket

Lubricator, air pump, bracket

“ flange, bracket

“ main, bracket

Running board bracket

Throttle lever

“ “ connection

“ “ “ end, jaw

“ “ fulcrum....

“ “ ‘‘ link

Schedule No.

Page

. 4M10

3

. 4M12

6

. 4M20

9

. 4M22

12

. 4M28

14

. 4M32

15

. 4M34

20

. 4M40

21

. 4M42

26

. 4M48

27

. 4M52

28

. 4M54

33

. 4M60

34

. 4M62

35

. 4M70

39

, . 4M72

42

. . 4M78

43

. . 4M80

45

, . 4M84

46

. 4M90

48

. 4M100

50

. 4M102

52

. 4M108

54

. 4M112

56

. . 4M114

58

. . 4M120

60

. 4M126

62

. 4M140 -

65

. . 4M146

68

. . 4M160

71

. . 4M168

73

. . 4M176

75

. . 4M190

77

. . 4M194

79

. . 4M200

81

. . 4M300

84

. 4M400

89

. . 4M420

92

. . 4M422

96

. . 4M450

97

. . 4M454

100

761

762

INDEX TO BOILER MOUNTINGS.

Schedule No.

Throttle lever fulcrum, link, end, jaw 4M456

“ “ handle 4M466

“ “ latch 4M476

“ “ “ box 4M478

“ “ ‘‘ rod 4M490

“ “ quadrant 4M500

“ bracket 4M502

“ “ stem 4M516

“ “ support 4M518

Wheel cover bracket 4M550

Whistle valve arm 4M560

“ “ lever 4M564

“ “ “ hand ! 4M566

“ “ rod, connecting 4M570

Paffe-

103

104

105

108

no

112

115

117

118

120

123

126

130

134

INDEX TO CAB AND WOOD WORK

Schedule No. Page

Apron hinge 4N10 139

“ “ link 4N14 142

Bumper, front (or, pilot beam), band 4N20 143

“ “ “ “ “ “ end 4N23 145

Cab grab-iron 4N30 146

“ seat support 4N36 150

“ “ “ hinge 4N38 151

“ ventilator, lever, operating 4N50 152

“ “ lock, bracket 4N54 154

“ ‘‘ “ hook 4N60 156

“ “ shaft, operating, arm 4N68 157

“ window, rod, adjusting 4N76 159

Coupler, rod, uncoupling 4N90 160

“ “ arm 4N92 162

“ “ “ bracket 4N96 163

Deck support 4N100 165

Pilot beam band 4N200 167

“ brace 4N202 168

“ “ ‘‘ foot 4N204 173

“ grab-iron 4N208 174

“ brace, corner ; . . 4N212 176

coupler guard 4N216 177

“ drawhead 4N220 179

“ rim band 4N240 180

Step, engine, bracket 4N250 184

“ “ hanger 4N256 186

763

INDEX TO AIR-BRAKE MECHANISM

ENGINE BRAKE

Schedule No. Page

Cock, angle, bracket T 4Q10 191

Cylinder, brake, spring release 4Q16 193

Dummy coupling, lug 4Q20 194

Equalizer, main, fulcrum support 4Q28 196

Pump, air, bracket 4Q50 198

“ “ rod, piston 4Q58 201

Reservoir, auxiliary, support 4Q68 203

“ equalizer, support 4Q72 206

“ main, support 4Q76 209

Valve, distributing, bracket 4Q90 215

“ engineer’s brake, bracket 4Q96 218

“ feed, bracket 4Q100 221

“ signal, bracket 4Q110 223

TENDER BRAKE

Cylinder bracket 4Q200 225

Reservoir, auxiliary, support. 4Q250 228

Rod, push 4Q260 231

“ “ end, jaw 4Q262 233

764

INDEX TO BOILER

Dome, brace, end

“ lug

“ ring

Firebox, bar, crown

“ “ “ bolt...

“ “ “ “ washer,

“ “ sling

ring, mud

sheet, back head, brace, stay ....

a .. a u u

“ “ “ “ “ lug.

“ crown, bolt, radial stay. . . .
“ “ brace, stay, lug . . . .

“ “ tee-iron

“ throat, brace stay end

“ " “ “ lug

“ stay, longitudinal

Mud drum ring

Sheet, front flue, brace, lug

“ “ “ tee-iron

Smoke box damper quadrant . . . ,
“ “ netting door frame . . ,

“ “ pipe, petticoat, brace.

“ “ ring, front

“ “ “ intermediate. . .

“ “ superheater support .

:hedule No.

Page

4R10

237

4R14

239

4R18

242

4R30

244

4R32

247

4R36

249

4R40

251

4R60

255

4R70

265

4R74

271

4R78

273

4R86

277

4R90

279

4R100

282

4R114

283

4R118

284

4R126

285

4R150

287

4R200

290

4R210

291

4R240

292

4R250

295

4R260

296

4R270

299

4R276

302

4R290

3.05

765

INDEX TO ASH PAN AND GRATE RIGGING

Damper, bar, lifter

“ “ “ bracket

“ crank bell

“ “ “ fulcrum

“ door hinge

“ fastener

“ handle, lift . . .

“ hook, back

“ rod, connecting

“ “ “ link, intermediate support.

“ shaft

“ “ arm

“ “ vertical, arm, loose

“ “ box

Dump, drop, crank, bell

“ “ arm

“ “ “ operating

“ rod, connecting

“ ‘‘ lifting

“ “ “ “ end, boss

“ “ shaft .

“ “ “ arm

“ “ “ box

“ slide, cylinder, rod, piston

“ “ “ support

“ “ rod, connecting

“ “ “ “ end, jaw

“ “ yoke

“ “ “ lug

“ “ “ rod, pull

“ “ “ “ “ end, loose, jaw

Support

Burner, oil, pipe clamp

Damper, handle, regulating, bracket

“ lever, regulating

“ “ “ quadrant

“ rod, connecting

“ shaft, back regulating

“ “ “ “ arm

“ “ vertical

“ “ “ bracket

hedule No.

Page

4S10

312

4S14

313

4S18

314

4S22

317

4S26

319

4S34

321

4S38

323

4S46

325

4S60

326

4S66

331

4S70

332

4S72

335

4S76

336

4S80

338

4S100

339

4S102

341

4S108

342

4S140

345

4S146

349

4S150

351

4S156

352

4S160

353

4S164

355

4S180

357

4S186

360

4S190

365

4S194

369

4S200

370

4S210

372

4S216

373

4S220

374

4S250

375

4S300

379

4S320

380

4S326

382

4S330

383

4S350

384

4S356

386

4S358

387

4S366

388

4S370

389

766

INDEX TO ASH PAN AND GRATE RIGGING.

767

Damper, shaft, vertical, bracket step

u (( u (c “U”

“ “ “ lever connection . . . .

Heater, oil, clamp

Valve, oil, cut-out, crank, bell

“ “ regulating, rod, connecting

“ “ “ shaft, vertical

“ “ “ ‘‘ bracket

(( U (( iC cc u

“ step

lever, connection .

“ “ ‘‘ stem.

Grate, dump, lever, operating.

.. “ “ “ I

“ link, connecting.
“ lug, locking.

“ shaft

bar, handle .

connection .

rocking, bar, connecting. .
“ lever, connecting.
“ ‘‘ operating.

end, jaw.

lug, locking,
shaft

bar, handle (shaker bar) .
rod, connecting

arm.

box.

Schedule No.

Page

... 4S374

390

... 4S378

391

... 4S386

392

. . . 4S400

394

. . . 4S450

396

. . . 4S460

398

. .. 4S468

400

. . . 4S472

402

. . . 4S476

403

. .. 4S484

405

. . . 4S490

406

. . . 4S494

408

. . . 4S500

410

. .. 4S506

416

. . . 4S510

420

. . . 4S514

421

. . . 4S524

423

. .. 4S526

424

. . . 4S530

426

. . . 4S534

430

. .. 4S560

432

. .. 4S570

435

. .. 4S576

437

. .. 4S580

441

. .. 4S586

445

. . . 4S590

449

. .. 4S594 •

451

. .. 4S596

452

. . . 4S598

454

. . . 4S650

457

support,

INDEX TO TENDER

TENDER BRAKES

Hand brake, rod, truck brake

“ “ staff

“ “ “ bracket

Truck brake beam, chain, safety, bolt eye

“ “ “ “ “ hook

“ “ “ “ “ link, closed

“ “ “ rod, tie

“ “ “ “ truss

“ “ fulcrum support

“ “ lever, cylinder

“ “ “ dead or live

“ “ “ “ “ guide

“ “ “ “ “ eye bolt

“ " “ “ " lug

“ “ “ equalizing

“ “ “ “ bracket

“ “ rod, connecting

“ “ “ “ end

“ • “ “ “ bar, side

TENDER FRAME

Chain, safety, bolt, eye

“ “ clevis or “U” bolt

“ “ hook

“ “ link, closed

Coupler carrier

“ rod, uncoupling

“ yoke

“ “ end

Drawbar

“ pin

“ yoke follower

“ “ “ carrier f.

Iron, chafing, front

“ “ rear

Pipe, steam, clamp

Rod, draft

“ truss, plate

“ “ washer

Sill, center, brace

S chedule No.

Page

.. 4U10

465

. . 4U14

467

. . 4U16

469

. . 4U30

471

. . 4U34

472

. . 4U38

473

. . 4U60

475

. . 4U62

479

. . 4U80

480

. 4U90

482

. . 4U92

485

. . 4U94

487

. . 4U98

491

. . 4U102

492

. . 4U116

493

. . 4U120

495

. . 4U150

497

. . 4U154

499

. . 4U160

500

4U200 .

504

4U204

505

4U208

508

4U212

510

4U220

512

4U222

514

4U224

516

4U226

519

4U240

521

4U244

527

4U246

530

4U248

531

4U260

534

4U264

535

4U280

537

4U290

541

4U296

542

4U300

544

4U310

545

768

INDEX TO TENDER.

769

Schedule. No. Page

Sill, side and end, connection 4U318 547

Step, rear 4U324 549

Transom (or channel bar) 4U334 552

“ bracket, front 4U338 553

TENDER TANK

Brace 4U380 554

Coal pusher cylinder, lug, fastening 4U388 556

“ “ “ piston rod 4U398 558

“ “ “ “ “ end, boss 4U400 560

“ “ door, bottom hinge 4U410 561

Hand hold 4U450 564

Headlight bracket 4U460 568

Ladder 4U470 570

Tank, oil and water, bracket, connecting 4U490 572

“ “ anchor 4U496 574

“ “ ‘‘ lug 4U500 576

“ ‘‘ heater clamp 4U510 577

“ ‘‘ “ “ end 4U514 579

“ water, anchor lug 4U520 580

“ “ leg step ; 4U530 581

“ “ siphon clamp 4U540 583

“ “ valve stem 4U550 587

“ “ “ “ end, jaw 4U554 590

TENDER TRUCK

Axle 4U600 592

“ slab 4U608 593

Bar, arch 4U612 594

“tie 4U616 602

Box, journal, bolt 4U626 604

Column bolt 4U636 605

Swing link 4U650 606

‘‘ ‘‘ end, boss 4U656 608

“ “ “ jaw 4U660 609

INDEX TO MISCELLANEOUS

Schedule No.

Bolts, miscellaneous 4W2

“ button or countersunk head 4W4

“ hexagonal or square head 4W8

“ roundhead 4W16

Page

613

614

615

616

770

INDEX TO TOOLS

Schedule No. Page

Auger, bridge or ship 4Y10 619

“ flue 4Y14 620

Awl, scratch 4Y18 621

Bar, chisel 4Y26 622

- claw 4Y28 623

“ hydraulic jack 4Y34 624

“ jack or buggy 4Y38 625

“ lining 4Y42 626

“ nail 4Y44 627

“ pinch, engine 4Y48 628

“ “ station 4Y50 629

“ punch 4Y52 630

“ staybolt , 4Y56 631

“ “ (for staybolt breaker) 4Y58 632

“ tamping 4Y60 634

“ timber 4Y62 635

“ wedge 4Y70 636

Blade, shear, top or bottom 4Y80 639

Block, swage, steam hammer 4Y86 642

‘‘ “ ‘‘ 4Y88 643

Chisel, miscellaneous 4Y 100 645

“ hot or cold, blacksmith’s 4Y120 646

“ wood 4Y146 648

Clamp, planer 4Y160 649

“ “U” 4Y164 651

Cutter, round or straight, steam hammer 4Y170 652

Dog, boilermaker’s 4Y180 653

“ lathe 4Y182 654

“ “ set-screw 4Y184 657

“ stop, Norton jack 4Y188 658

Drill, flat, round or square shank 4Y194 659

“ twist 4Y198 661

Flatter, round or square 4Y210 662

“ steam hammer 4Y214 663

Fuller, bottom 4Y220 664

“ round, steam hammer 4Y228 665

“ three-cornered, steam hammer 4Y232 666

“ top 4Y234 667

Gouge, round or square 4Y250 669

Hammer, backing, blacksmith’s 4Y260 671

“ hand 4Y264 672

771

772

INDEX TO TOOLS.

Schedule No. Page

Hammer, scale, painter’s 4Y268 673-

“ sledge, blacksmith’s 4Y272 674

“ “ machinist’s 4Y274 675

Hook, cant 4Y290 676

“ packing 4Y294 677

“ pike pole 4Y296 678

“ velocipede 4Y300 679

Iron, packing 4Y310 680'

“ soldering • 4Y314 681

Maul, track 4Y320 682

Old man 4Y330 683

“ “ arm 4Y334 684

Pick, coal 4Y340 685

“ dirt, old style or tamping 4Y344 687

Pin, drift, blacksmith’s 4Y350 689

“ “ boilermaker’s 4Y352 690'

Punch, center, machinist’s 4Y360 691

“ handle, blacksmith’s or boilermaker’s 4Y364 692

“ track, round or square 4Y370 693

“ screw, machinist’s 4Y374 694

Rake, fire, blacksmith’s , 4Y380 695

Saddle, anvil, blacksmith’s 4Y390 696

Scraper, painter’s 4Y396 697

Screw-driver 4Y400 69S

Set hammer 4Y406 699

“ rivet 4Y408 700

Sprinkler, handle, blacksmith’s 4Y412 701

Swage, bottom 4Y416 702

“ steam hammer 4Y420 703

top 4Y424 705

Tongs, chisel 4Y440 707

“ flat, blacksmith’s ! 4Y444 708-

“ “ furnace 4Y446 709

“ “ “ handle 4Y450 710

ice 4Y454 '711

“ link 4Y464 712

“ lip, blacksmith’s 4Y468 713

“ “ furnace 4Y470 714

“ pick-up, blacksmith’s 4Y474 715

“ “ furnace 4Y476 716

“ pile 4Y478 717

“ rivet 4Y490 718-

“ rocker arm, end 4Y494 719

“ “ “ journal 4Y496 720

“ round or square, blacksmith’s 4Y500 721

“ “ or half-round, furnace 4Y502 722

INDEX TO TOOLS.

773

Schedule No. Page

Tongs, saddle 4Y510 723

Tool, miscellaneous 4Y530 726

u “V,” male or female 4Y540 728

Tram, crosshead 4Y550 729

“ valve 4Y554 730

“ wheel 4Y558 731

Wedge, solid 4Y562 732

‘‘ split 4Y564 733

Wrench, alligator 4Y580 734

“ barrel 4Y584 736

“ box, double end 4Y588 737

“ “ single end 4Y592 738

“ crowfoot 4Y596 740

“ grease cup plug 4Y600 742

“ hydrant, hobo 4Y604 744

“ open end, double 4Y610 745

‘‘ “ “ single 4Y612 747

“S,” car repairer’s 4Y616 749

“ “S,” double end 4Y620 750

set-screw, gooseneck 4Y624 752

spanner 4Y628 753

“ socket, straight or gooseneck 4Y634 755

‘‘ tap, double or single end 4Y642 757

“ truss rod, car repairer’s 4Y650 759

LIST OF ILLUSTRATIONS

BOILER MOUNTINGS

Page

Box, sand, brackets 3

“ “ “ step 6

“ “ lever, hand 9

“ “ “ “ rod 12

“ valve arm 14

“ “ “ “ connection 15

Cock, blowoff, lever 21

‘‘ “ “ fulcrum 27

“ “ rod, connecting 28

“ “ shaft 34

“ “ “ bracket 35

Crane, front end, boom 39

“ “ “ “ jib jaw 46

“ “ “ “ support 48

“ ‘‘ “ carriage jaw, lower 50

‘‘ “ “ “ “ upper 52

“ ‘‘ “ lock, bracket 54

Drip pan bracket 56

Dynamo bracket. 58

Fountain, steam, bracket 60

“ “ dry pipe hanger 62

Gauge, steam, lamp bracket 65

Glass, water, lamp bracket 68

Hand rail post bracket 71

Headlight step 73

Injector bracket 75

Lubricator, air pump, bracket 77

‘‘ flange, bracket » . 79

“ main, bracket 81

Running board bracket 84

Throttle lever 89

“ ‘‘ connection 92

‘‘ fulcrum 97

“ “ • link .... 100

‘‘ “ handle 104

“ “ latch ' 105

“ “ “ box 108-

“ ‘‘ “ rod 110

“ “ quadrant 112

774

LIST OF ILLUSTRATIONS.

775

Throttle lever quadrant bracket

“ “ support

Wheel cover bracket

Whistle valve arm

“ “ lever

“ ‘‘ ‘‘ hand

“ rod, connecting

CAB AND WOOD WORK

Apron hinge

Bumper, front (or pilot beam) band

Cab grab-iron

“ seat support

“ “ hinge

“ ventilator, lever, operating

“ “ lock bracket

“ “ “ hook

“ shaft operating, arm

“ window, rod, adjusting

Coupler, rod, uncoupling

“ ‘‘ ‘‘ bracket

Deck support

Pilot beam brace

“ “ grab-iron

“ brace, corner

“ coupler guard

“ drawhead

“ rim band

Step, engine, bracket

“ hanger

AIR-BRAKE MECHANISM

Cock, angle bracket

Cylinder, brake spring, release

Dummy coupling lug

Equalizer, main, fulcrum support

Pump, air, bracket

“ ■ “ rod, piston

Reservoir, auxiliary, support

“ equalizer, support

“ main, support

Valve, distributing, bracket

“ engineer’s brake, bracket

“ feed, bracket

“ signal, bracket

Tender brakes cylinder bracket

“ “ reservoir, auxiliary, support

Page

115

118

120

123

126

130

134

139

143

146

150

151

152

154

156

157

159

160

163

165

168

174

176

177

179

180

183

186

191

193

194

196

198

201

203

206

207

215

218

221

223

225

228

776

LIST OF ILLUSTRATIONS.

BOILER

Dome, brace, end

“ “ lug

“ ring

Firebox, bar, crown ;

“ “ bolt

“ “ “ “ washer

“ “ sling

“ ring, mud

“ sheet, backhead, brace, stay

“ “ “ “ “ end

“ “ “ “ “ lug

‘‘ crown, bolt, radial stay

“ “ “ brace, stay, lug

“ “ ^ “ tee iron

“ “ throat, brace, stay, end

“ stay, longitudinal

Mud drum ring

Sheet, front flue, brace lug

“ “ “ tee iron

Smoke box damper quadrant

“ “ netting door frame

“ “ pipe, petticoat, brace

“ “ ring, front

“ “ “ intermediate

“ “ superheater support

ASH PAN AND GRATE RIGGING

Ash pan, general arrangement

Damper bar, lifter

“ crank, bell

“ fulcrum

‘‘‘ door hinge

fastener

handle, lift

hook, back

rod, connecting

“ link, intermediate, support

shaft

“ “ vertical, arm, loose

“ “ box

Dump, drop, crank, bell

“ “ “ operating

“ “ rod, connecting

“ “ “ lifting

“ “ shaft

“ arm

Page

237

239

242

244

247

249

251

252

264

271

273

277

279

282

283

285

287

290

291

292

295

296

299

302

305

311

312

314

317

319

321

322

325

326

331

332

336

338

339

342

345

349

352

353

LIST OF ILLUSTRATIONS.

Dump, drop, shaft box

“ slide, cylinder, rod, piston

“ “ “ support

‘‘ “ rod, connecting

“ “ yoke

“ “ ^ “ lug

“ “ “ rod, pull

“ “ “ “ “ end, loose jaw

Support

Oil-burning arrangement on engine and tender .

Burner, oil, pipe, clamp

Damper, handle, regulating bracket

” lever, regulating

“ quadrant

“ rod, connecting

“ shaft, back, regulating

“ vertical

“ “ “ bracket

“ “ “ “ step

‘‘ ‘‘ “ “ ‘‘U”

“ “ “ lever connection

Heater, oil, clamp

Valve, oil, cut-out, crank, bell

“ “ regulating shaft, vertical

“ “ “ “ “ bracket

“ “ ' “ “ “ “ step.

“ “ “ stem

Grates and grate rigging, general arrangement . . .

Grate dump, lever, operating

“ '' “ “ bar, handle

“ “ link,, connecting

“ “ lug, locking

“ “ shaft

“ “ “ arm

“ “ “ “ connection

“ rocking, bar, connecting

“ “ lever, connecting

“ “ “ operating

“ “ “ rod, connecting

‘‘ “ lug, locking

“ “ shaft

“ “ ‘‘ box

777

Page

355

357

359

365

370

372

373

374

375

378

379

380

382

383

384

386

387

388

389

390

391

392

394

396

400

402

403

408

409

410

416

420

421

423

424

426

432

435

437

445

449

451

454

457

support

778

LIST OF ILLUSTRATIONS.

TENDER

TENDER BRAKES Page

Hand brake, rod, truck brake 465

“ “ staff 467

“ “ “ bracket 469

Truck brake beam, chain, safety, bolt eye 471

“ “ rod, tie 475

“ “ '' “ truss 479

fulcrum, support 480

‘‘ lever, cylinder 482

“ “ “ dead or live 485

“ “ “ “ guide 487

“ “ equalizing ^ 493

“ “ “ “ bracket 495

“ “ rod, connecting 497

“ “ “ “ bar, side 500

TENDER FRAME

Chain, safety, clevis or “U” bolt 505

“ “ link, closed 510

Coupler carrier 512

“ rod, uncoupling 514

“ yoke 516

Drawbar 520

“ pin 527

yoke follower 530

Iron, chafing, front 534

“ ‘‘ rear 535

Pipe, steam, clamp 537

Rod, truss, plate 542

“ washer 544

Sill, center, brace ,. . . . 545

“ side and end, connection 547

Step, rear 549

Transom, bracket, front 553

^ TENDER TANK

Brace 554

Coal pusher cylinder lug, fastening 556

“ “ “ piston rod 558

“ ‘‘ door, bottom hinge 561

Hand hold 564

Headlight bracket 568

Ladder 570

Tank, oil and water, bracket, connecting 572

“ “ anchor. .‘ 574

“ lug 576.

LIST OF ILLUSTRATIONS.

779

Page

Tank, oil, heater clamp 577,

“ water, leg step 581

“ “ siphon clamp 583

“ “ valve stem 587

f

TENDER TRUCK

Axle 592

Bar, arch 594

Box, journal, bolt 604

Column bolt 605

Swing link 606

TOOLS

Auger, bridge or ship 619

“ flue 620

Bar, chisel 622

“ claw 623

“ hydraulic, jack 624

“ jack or buggy 625

lining 626

“ nail 627

“ pinch, engine 628

“ “ station 629

“ punch 630

“ staybolt 631

“ “ (for staybolt breaker) 632

“ tamping 634

“ timber 635

“ wedge 636

Blade, shear, top or bottom 637

Block, swage, steam hammer 642

“ “V” steam hammer 643

Chisel, miscellaneous 644

“ hot or cold, blacksmith’s 646

Clamp, planer 649

“U” 651

Cutter, round or straight, steam hammer 652

Dog, boilermaker’s 653 ‘

“ lathe 654

Drill, flat, round or square shank 659

“ twist 661

Flatter, round or square 662

“ steam hammer 663

Fuller, bottom 664

“ round, steam hammer 665

“ three-cornered, steam hammer 666

“ top 667

780

LIST OF ILLUSTRATIONS.

Gouge, round or square

Hammer, hand

“ scale, painter’s

“ sledge, blacksmith’s
“ “ machinist’s.

Hook, cant

“ packing

“ pike pole

“ velocipede

Iron, packing

“ soldering

Maul, track

Old man

Pick, coal

‘‘ dirt, old style or tamping

Pin, drift, blacksmith’s

Punch, handle, blacksmith’s or boilermaker’s

“ track, round or square

“ screw, machinist’s

Rake, fire, blacksmith’s

Saddle, anvil, blacksmith’s

Screw-driver

Set hammer

“ rivet

Sprinkler handle, blacksmith’s

Swage, bottom

“ steam hammer

“ top

Tongs, chisel

“ flat, blacksmith’s

“ furnace, handle

“ ice

“ link

“ lip, blacksmith’s

“ pick-up, blacksmith’s

pile

‘‘ rivet

“ rocker arm, end

“ “ “ journal

“ round or square, blacksmith’s

“ “ or half-round furnace

“ saddle

Tool, miscellaneous

u male or female

Tram, crosshead

Page

669

672

673

674

675

676

677

678

679

680

681

682

683

684

685

687

689

692

693

694

695

696

698

699

700

701

702

703

705

707

708

710

711

712

713

715

717

718

719

720

721

722

723

724

728

729

LIST OF ILLUSTRATIONS.

781

Page

Tram, valve 730

“ wheel 731

Wedge, solid 732

“ split 733

Wrench, alligator 734

“ barrel 736

“ box, double end 737

“ “ single end 738

“ crowfoot 740

“ grease cup plug 742

“ hydrant, hobo 744

“ open end, double 745

“ “ “ single 747

“ “S,” car repairer’s 749

“ “S,” double end *. 750

‘‘ spanner 753

“ socket, straight or gooseneck 755

“ tap, double or single end 757

“ truss rod, car repairer’s 759

■:■■■■ ^:vl

, •

■

' ■ -
'' ’ ' '' i:

(

\

\

I

M

.rS

m

V'% ■

■ '

y .'^\ j ' y - ’,>■*•'1 '" VV'y -

!wr. .• • ■ , • ”-r .

^•MiMr. V,' - '-

“ /V'

A

I

. ••'I

1

f